Classic Collet Knobs. Standard Product Variety. Introduction. Possible Customization

Similar documents
KNOBS CLASSIC COLLET MAIN FEATURES. Precise quality knobs Secure collet mounting Wide variety Lots of accessories Customized colors on request

Classic Collet Knobs. Standard Product Variety. Introduction. Possible Customization

RANGE SUMMARY OF RITEL PRODUCTS, AS SUPPLIED BY ELLMAX ELECTRONICS LTD., LONDON

SELECTOR SWITCH TYPE 01

Mechanical accessories

Product Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing

LIST NO. F409 ROTARY HAMMER. Model DH 28PD (E1) DH28PD 22% TU Rev.1

US FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.

Instructions for installing your QuiltCam on your Gammill quilt machine.

Optical Fiber Assemblies

Ø 11,4 21,5. M9 x 0,5 Ø 12 Ø 11,4. M9 x 0,5 Ø 12. M9 x 0,5

Accessories.

MULTI ROTARY SWITCH MR50

Assembly and Setup Manual

Standard Bellows Metering Pumps

Conductor and Cable Marking Description and Handling

ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information

MULTI ROTARY SWITCH MR50

modular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security

Dial Thermometer. Particularities. Brief description. Technical data. Page 1/6. Data Sheet

Stainless Steel Hatch Fasteners Page

IS-DM220/IR/HB IS-DM220

Compact Bellows Pumps

Data Sheet for Angle Sensors

ODU MINI-SNAP PC Product Description. ODU MINI-SNAP PC: The Connector with Push-Pull-Locking in Plastic

Spindles Screws. 9b Overview. FSB Stabil-spindle. FSB Stabil-half-spindle. Accessories Stabil-spindle. FSB Special spindle. Accessories.

C5 Series Stainless Steel Photoelectric

Product Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications

Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications

Contents. Page 2 TRCTFP101

Assembly and Setup Manual

Selector Switch Type 04

Selector Switch Type 04

Sensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.

Assembly Instructions for #5630 Medication PalWOW

Terminals, Lugs, and Fasteners

ERNI Pre-Alignment Modules

Accessory Kit for all Designs of Hand-held Pendant Station

Accessories. Page 1/

Data Sheets Wiring Components. Fanning Strips. Guide Rings and Holder. Guide Hooks. Spacer Bars. Dummy Plates. Contact. Christian Jaramillo-Arriagada

Magnetic field sensor Magnetic-inductive Proximity Sensor BIM-M12E-Y1X

Installing the Server into a Rack

Rotary Measuring Technology

Product Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications

1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist.

Product Information. ECI 4090S Absolute Rotary Encoder with 180 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications

Clean packaging Class M3.5 Standard packaging Class M5.5. The U type is recommended when changing tubing sizes. Packaging

FE Series Photoelectric Sensors

EDUCATIONAL SPECTROPHOTOMETER ACCESSORY KIT AND EDUCATIONAL SPECTROPHOTOMETER SYSTEM

604 SOCKET HEAD BUTTON SCREWS

SIZES FROM 1, ,000 Nm BACKLASH FREE, TORSIONALLY STIFF METALLIC BELLOWS COUPLINGS

Installation Guide Philips MP60/70 IntelliVue VHM Arm Rail Mount Kit

Online data sheet WL9LG-3P2232 W9LG-3 SMALL PHOTOELECTRIC SENSORS

Installation Guide Mounting Kit for Mounting Philips Avalon CTS Cordless Fetal Transducer System on Wall, 2'' Post, Rail, or Slide-on Mounting Plate

RD-44 Audio Network Control Panel

TO ALL OUR CUSTOMERS 1. NEW ADVANCE GRP SERIES - 16A-32A-63A INTERLOCKED SOCKETS IN THERMOSET TING MATERIAL

Sealing boots. Prevent dust, sand and water from getting into switches. On toggle versions, also prevent ice from blocking lever action

Technical Data Sheet Screw Clamps and Universal Clamps

MiR Top camera. Intel RealSense TM Camera (R200) Technical Documentation

ATTENTION: OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES

Features Benefits. Collets. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and size (reduced collet selection errors).

GX SERIES. Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. Robust enclosure and flexible cable types are also available

The World s in Compactness. * Among photoelectric sensors with built-in amplifier, as of June 2015 (survey by our company)

Product Information. ECI 4090 S Absolute Rotary Encoder with 90 mm Hollow Shaft and DRIVE-CLiQ Interface for Safety-Related Applications

Cylindrical Compact Inductive Proximity Sensor Amplifier Built-in. panasonic.net/id/pidsx/global

Mounting Accessory Guide

AMPLIMITE Subminiature D Connectors. HDF-20 Metal-Shell or All-Plastic Plug. Retaining Clip See Note [6.35]

Digital Indicators 1075 / 1080 / Features. Technical Data IP MarCator. Digital Indicators

ACCESSORIES CONTENTS CABLE TERMINATORS PAGE

Universal Tablet Mount Accessory for Flex TechBridge

Pixus Technologies Catalog

AccuTrak Rotary Position Monitors Weatherproof NEMA and IEC

SUBMINIATURE MICROSWITCHES - SEALED

Incremental Encoder with Hollow Shaft

No. 1. The World s in Compactness. Amplifier Built-in Ultra-minute Photoelectric Sensor EX-Z SERIES panasonic.net/id/pidsx/global

Polycarbonate and ABS QLINE E

400 Series Buccaneer BUCCANEER FOR POWER. IP68 rating tested at 1.054kg/sq cm (15lb/sq in) 10m depth for 2 weeks

Pixus Technologies Catalog

Approx. 4 s, measured in oil, with a probe Ø of 10 mm made of stainless steel. Influential effect of the ambient temperature

Installation Guide Philips MP20/30/40/50/60/70 IntelliVue M-Series Arm Rail Mount Kit

YOUR STABLE PARTNER FOR MANUFACTURING. MARSTAND

SYSTEM 25 SYSTEM 50 AS SYSTEM 63 SYSTEM 75 SYSTEM 100. Alsident System 50. Antistatic (AS) Product Information

MBE Mounts and Adapters

Single action door patch fittings

PureFlow Zero Lead PEX manifold plumbing systems Number one rated PEX plumbing manifolds

3M I/O Connector Mounting Options and Hardware

DIGITAL OBSERVATION GUARD LOW PROFILE PAN TILT KIT USER MANUAL

ENC 125 T/E REFERENCE MANUAL. Acu-Rite Companies Inc.

Polycarbonate and ABS QLINE E

Transparent Covers for Rail-Mounted Terminal Blocks, Usable with Lead Seals Description and Handling

Switches and Indicators 84

8 Submersible Motors Standard

Service poles for industrial applications

Further Information can be found at

STR-3 STANDARD 3-PHASE 230 VAC TRANSFORMER CONTROLLER. Mounting and operating instructions

Round Water-resistant Connectors (M8) XS3

INTRODUCTION TO MECHANICAL ASSEMBLY (DVD-46C)

EVOLVE1-M MONITOR ARM

[This page is intentionally blank]

Data Sheet for Angle Sensors

Transcription:

Precise quality knobs Secure collet mounting Wide variety Lots of accessories Custom colors on request Standard Product Variety to mm knob size Shaft diameter: mm to ¼" Glossy or matt surface or gray knob color Various cap colors With or without line Various accessories Possible Customization Color Shaft diameter Introduction Elma classic collet knobs are available in different diameters. Knobs with diameters of to mm are stocked in two versions; with and without wings. Both versions are available with a line as an option. The knobs are fixed onto the shafts by means of the proven collet tightening method. The tightening elements for knobs with diameters of mm and. mm are hidden from view by nut covers. For the larger knob types, concealment of these elements is ensured by the special Elma design. Caps, pointers, figure dials and nut covers can all be simply plugged onto the collet knobs thanks to the modular design principle. Furthermore, two different switches can be operated by inserting one knob on top of the other (concentric style). Knobs with diameters of. to mm are designed to enable the next smallest knob to fit onto it. When dual knobs are used, the larger of the two must be equipped with a collet with through-hole. Classic Collet Knobs Overview Knob size vs. shaft diameter, wing and crank style Knob Size Shaft mm mm. mm mm mm mm mm mm mm mm mm ⅛" ¼" Wing knob Crank knob See page - - - Rotary Switches

Knob Size: Ø mm Knob, Matt Glossy Matt Glossy - - - - - - - - ⅛" - - - - - - - - - - - - ⅛" - - - - Cap,, Surface Red Blue Yellow Green Without line Matt - - - - - -, Glossy - - - - - - With line Matt - - - - - - Glossy - - - - - - Pointer Surface Red Blue Yellow Green, Matt - - - - - - Glossy - - - - - - Pointer Dial,, Surface Red Matt - - - Glossy - - -,,,, Stator With Line,, - - Figure Dial,,. F D C B A F E mm - - - - - - - - - - Rotary Switches

Knob Size: Ø mm a Knob a Matt Glossy Matt Glossy Without line. - - - -. - - - -. ⅛" - - - -. - - - -. - - - -. - - - -. ⅛" - - - - With line. - - - -, Wing Knob a Matt Glossy Matt Glossy Without line. - - - -. - - - -. ⅛" - - - -. - - - -. - - - -. - - - -. ⅛" - - - - With line. - - - - Pointer, pointer dial, nut cover and figure dial do not fit to wing knobs unless otherwise stated. Cap Surface Red Blue Yellow Green,,, Without line Matt - - - - - - Glossy - - - - - - With line Matt - - - - - - Glossy - - - - - - Pointer Surface Red Blue Yellow Green, Matt - - - - - - Glossy - - - - - -, Pointer Dial Surface Red Matt - Glossy - Matt - - - Glossy - - - Rotary Switches

Nut Cover,,, Surface without line Matt - - Glossy - - with line Matt - - Glossy - -,,, Stator With Line,, - -, - - Figure Dial, mm - - - - - - - mm - - - - - - - - - -. F D C B A F E Rotary Switches

Knob Size: Ø. mm a Knob a d Matt Glossy Matt Glossy Without line. - - - -,, mm a > mm d With line. ⅛" - - - -. - - - -.. - - - -.. ¼" - - - -. - - - -. ⅛" - - - -. - - - -.. - - - -.. ¼" - - - -, Wing Knob a d Matt Glossy Matt Glossy Without line. - - - -. ⅛" - - - -. - - - -.. - - - -.. ¼" - - - -. - - - -. ⅛" - - - -. - - - -.. - - - - With line.. ¼" - - - - Pointer, pointer dial, nut cover and figure dial do not fit to wing knobs unless otherwise stated. Cap Surface Red Blue Yellow Green, Without line Matt - - - - - - Glossy - - - - - - With line Matt - - - - - - Glossy - - - - - - Pointer Surface Red Blue Yellow Green,,, Matt - - - - - - Glossy - - - - - -.. Pointer Dial Surface Red Matt - - - Glossy - - - Rotary Switches

Nut Cover,,, Surface Red Without line Matt - - - Glossy - - - With line Matt - - - Glossy - - - Only for wing knob Matt - - - Glossy - - -,,,, Stator With Line,, - - Figure Dial... F D C B A F E mm - - - - - - - - - - mm - Rotary Switches

Knob Size: Ø mm,, a Knob a d Matt Glossy Matt Glossy Without line. - - - -,,. - - - -, mm, a With line. ¼" - - - -. - - - -. - - - -. ¼" - - - -,, mm,, d Wing Knob a d Matt Glossy Matt Glossy Without line. - - - -. - - - -. ¼" - - - -. - - - -. - - - - With line. ¼" - - - - Pointer, pointer dial and figure dial do not fit to wing knobs unless otherwise stated. Cap,, Surface Red Blue Yellow Green Without line Matt - - - - - -,, Glossy - - - - - - With line Matt - - - - - - Glossy - - - - - - Pointer, Surface Red Blue Yellow Green Matt - - - - - - Glossy - - - - - -,, Pointer Dial Surface Red Matt - - - Glossy - - - Stator,,, With Line,,, - - -,, Rotary Switches

Figure Dial,,. mm - - - - - - - - - - mm - mm - Rotary Switches

Classic Collet Knobs Knob Size: Ø mm,,, Knob d Matt Glossy Matt Glossy Without line. - - - -. ¼" - - - -,, d. - - - - With line. ¼" - - - -, Wing Knob d Matt Glossy Matt Glossy Without line. - - - -. ¼" - - - -. - - - - With line. ¼" - - - - Pointer, pointer dial and figure dial do not fit to wing knobs unless otherwise stated. Cap Surface Red Blue Yellow Green,,,, Without line Matt - - - - - - Glossy - - - - - - With line Matt - - - - - - Glossy - - - - - - Pointer Surface Red Blue Yellow Green Matt - - - - - - Glossy - - - - - -,,, Pointer Dial Surface Red Matt - - - Glossy - - -,, Stator With Line,,,,, - - -,, Figure Dial, mm - - - - - - - - mm - mm - Rotary Switches

Knob Size: Ø mm,,, Knob d Matt Glossy Matt Glossy Without line. - - - -. ¼" - - - -, d With line. - - - -. ¼" - - - - Cap Surface Red,,,, Without line Matt - - - Glossy - - - With line Matt - - - Glossy - - - Pointer,, Surface Red Matt - - - Glossy - - -, Pointer Dial Surface Red Matt - - - Glossy - - -,,,, Stator With Line,, - -, Figure Dial mm - - - - - - mm -, Rotary Switches

KnobSize: Ø mm,,, Knob d, Glossy, Glossy Without line. - - d. ¼" - -. - - With line. ¼" - -,,, Crank Knob d, Glossy,Glossy. - -,, Cap Surface Red, Without line Glossy - - - Pointer use cap for mm knobs, Surface Red Glossy - - - Pointer Dial Surface Glossy - -,, Stator With Line,, - -,, Figure Dial, mm - - - - - - Rotary Switches

Knob Program Additions M,,,, Locking Set Locks arrow dial or figure dial Ø - mm on front panel (protection against unintentional turning). Locking Set, Consisting of Clear Transp. Screw with knob - - Clear Transp. with Line Locking piece - -,, a Anti-Slip Bracket D-shape prevents slippage on shaft and incorrect knob mounting. For knobs Ø,, mm. Anti-Slip Bracket Corresponding Shaft with Flat L a -, -, Ø a L Order Number mm. mm mm - mm. mm mm - mm. mm mm - ¼". mm mm - Gew.,, Slotted Nut Starting with the knobs Ø. mm, stators can be mounted directly underneath the slotted nut of the central mounting bushing of the switch., Thread M x. M x. M x. M x. ⅜" - Slotted nut - - - - -,, Mounting Aid Stators for knobs Ø. mm or larger can be mounted directly to the bushing on the front panel in cases where the switch does not have a central mounting. Gew. d, Mounting aid with through-hole Ø mm - Mounting Tool Tool for tightening of our slotted nuts and threaded bushings. Mounting tool -, Rotary Switches

Material Data Metal Parts Brass is used for the collets, sleeves and nuts. The surface of screw and washer is protected against corrosion. Knobs and Accessories With the exception of the transparent figure dials all mouldings of the collet knob range are manufactured of polyamide. This material is resistant against amyl alcohol, petroleum, freon, caustic potash, % caustic soda, all at a temperature of + C. Figure Dials The transparent dials are made of PMMA and are also resistant to the above mentioned chemicals. Operating temperature range: - to + C Packaging size: pcs. per tray Fastening and Operating Torques Knob Ø Collet Ø mm mm, ⅛" mm mm ¼" a b a b a b a b a b Ncm Ncm Ncm Ncm Ncm Ncm Ncm Ncm Ncm Ncm mm mm. mm to mm a = Max. admissible fastening torque for screws resp. nuts. b = Operating torque for stainless steel shafts with a tolerance of h for max. tightening torque. Rotary Switches

Type Key X - X X X X Style, Line - Knob without line - Knob with line - Wing knob without line - Wing knob with line Surface - Glossy - Matt Color - - Knob Size Collet Ø Collet with Through Drilling Ø ⅛" ¼" ⅛" ¼" mm mm. mm G mm E F G H mm E F G H mm E F H mm F H Explanation: Standard version (in the catalog) Optional Not possible Rotary Switches