Pixus Technologies Catalog
|
|
- Prosper Cooper
- 5 years ago
- Views:
Transcription
1 The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products S: CAN:
2 Product Diversity Knowledge Transfer MPS Expertise Globalization Integrative Thinking CompactPCI Front Panels & Injector/Extractor Handles Package Your Electronics With Ripac When it comes to electronics, no one handles today s demanding applications better than Kaparel/Rittal Ripac handles, front panels and accessories. Take our handles for instance. Kaparel/Rittal offers a wide range of types, including the CompactPCI specified self-locking injector/extractor handle for high pin count applications and the Type VII flush profile Telecom handle for limited I/O. What s more is we can provide advanced features, such as front panel and ESD protection, a microswitch for full hot swap applications, keying with 4096 combinations and drive chassis. Add to that a whole line of 3/6 EMC and Non-EMC front panels and your package is complete more solutions from The Original CompactPCI Company. 96
3 CompactPCI Comprehensive Solutions Front Panels & Handles CompactPCI Handle Solution, Type IV The Ripac CompactPCI injector/extractor handle referred to in the CompactPCI specification is designed to meet the IEEE 0.0 and IEEE 0. standards. This Ripac Type IV injector/extractor handle provides for full front panel I/O usage and is suitable for system (subrack) front and rear (I/O) mounted boards. The handle locking/unlocking device activating in the handle s embedded microswitch is a Ripac design feature. This solution complies nicely with the CompactPCI full hot swap requirements. Other features of this handle are: Keying of plug-in boards (4096 combinations) ESD protection Grounding connection for plug-in boards Tying of multiple handles together Telecom Handle Or Alternative Handle Solution, Type VII This injector/extractor handle solution has all the features of the IEEE 0.0/0. and CompactPCI requirements (with limited front panel I/O space) and is designed for systems (subracks) conforming to IEEE 0.0 and IEEE 0. standards. However, this handle has one more distinguishing feature: the solder ( 2) of the can be optionally increased by 2.54 mm (0. ) to provide for more surface mounted space (this additional feature cannot be implemented for CompactPCI). Suitable as pluggable power supply handle per PICMG Draft 2.. Tying together of multiple handles also available. CompactPCI Type IV Handles Type VII Handles Embedded Microswitch Assembly Keying Gasket Front Panels EMC & Non-EMC Adapters Drive Chassis Solder Side Cover
4 Perfect Handling Solutions With CompactPCI Handles n Type IVs Injector/Extractor Handle With Push-button Injector/extractor handle for the insertion and removal of rack connectors with a large number of pins. A metal insert ensures reliable functioning, even at forces of up to 85 N. The injector/extractor handles are only for use in conjunction with horizontal rails with a 0 mm extension. Push-button for locking and unlocking the board type plug-in unit (cannot be extracted in the locked position) Optionally with /2HP offset attachment, e.g. for mounting on both s Optional integral microswitch for live insertion applications ESD pin to dissipate static charges before connecting the board type plug-in unit Keying areas to accommodate keys Integral attachment Plastic/metal Injector/extractor handle, assembly parts Self Locking Installation Top Bottom With /2 HP Offset Installation Top Bottom Accessories: Keys, see page 00 Keyable guide rails, see page 57 Keyable guide rails with offset, see page 57 Microswitch, see page 99 Connection Pin For Injector/Extractor Handles, Types IV/IVs The connection pin can be used to connect injector/extractor handles, types IV and VII, by. Steel Type VII Injector/Extractor Handle, Plastic (Typically sed For cpci PSs) Injector/extractor handle for insertion and removal of connectors with a large number of pins. This handle was specifically designed for use in telecom applications. Only for use in conjunction with front horizontal rails with a 0 mm extension (see page 74). Optionally with /2 HP offset attachment, e.g. for mounting on both s Minimum space requirements, thanks to fold-up handle Option of installing keys (when using keyable guide rails) Optional integral microswitch for live insertion applications ESD pin to dissipate static charges prior to making contact with the connectors and precise positioning of the board type plug-in unit Large labeling area on the front Optimum leverage for connectors with a large number of pins Handles Without Offset Installation Top Bottom Handles With /2HP Offset Installation Top Bottom Plastic injector/extractor handle, assembly parts Accessories: Keys, see page 00 Keyable guide rails, see page 57 Keyable guide rails with /2HP offset, see page 57 Microswitch, see page 99 98
5 Type VII Injector/Extractor Handle (Telecom) (For 6 And 9 Applications) Perfect Handling Solutions With CompactPCI Handles Metal injector/extractor handle for insertion and removal of connectors with a large number of pins (up to 835 N). This handle was specifically designed for use in telecom applications. Only for use in conjunction with front horizontal rails with a 0 mm extension Optionally available with /2HP offset Option of installing keys Optional integral microswitch for live insertion applications ESD pin to dissipate static charges Metal design for use in aggressive atmospheres Die-cast zinc Injector/extractor handle, assembly parts Handles Without Offset (4.07 mm) Installation Top* Bottom* *Offset spacer no longer required Handles With Offset (6.6 mm) Installation Top Bottom Accessories: Keys, see page 00 Keyable guide rails, see page 57 Keyable guide rails with offset, see page 57 Microswitch, see below, page 99 Optional Retention Screw For handles Type IVs And VII Lever hinge Lever contact point Front panels with injector/extractor handles may retain the pluggable boards in the system by only using the self-locking feature of the handle or by using retention screws. Note: For EMC applications. When using these optional retention screws you may not need to use the horizontal gasketing mounted to the subrack system front/rear horizontal rails pieces Optional Retention Screw Embedded Microswitch Cable Assembly For Hot Swap Applications Lever hinge Lever contact point ~25mm 2 E L n Lever not pushed d Lever Hinge -2 Microswitch lever pushed down: injector/extractor handle in locked position. -3 Microswitch lever not pushed down: injector/extractor handle un-locked. Suitable for CompactPCI and other hot swap applications using a front panel injector/extractor handle operated device. Note: The required blue LED on the front panel is not offered and may be obtained otherwise. Microswitch Technical Data. Ratings: 30 V DC, 5-50 ma, resistive load (30,000 cycles) 60 V DC, 5 ma, resistive load (30,000 cycles) 60 V DC, 500 ma, resistive load (5,000 cycles) Operating Temp.: -3 F (25 C) to +58 F (+70 C) Humidity: RH 85% max Vibration: 0Hz to 55Hz, 8g Shock: 30g, msec May be inserted into both the CompactPCI and the Telecom handle. Microswitch assembly includes: Microswitch 3 wires, 25 mm x # 32 AWG Plug Retention clip ( assembly) The mounted header may be a through hole mounted header or a surface mounted header. Through hole mounted header: piece Surface mounted header: piece Note: Minimum quantity is 0 pieces. Microswitch Micrositch retainer Micrositch with harness assembly 99
6 Accessories Keys Keys are used for keying plug-type assemblies, and prevent them from being used in incorrect slots. The pins are inserted into the chambers of keyable guide rails and type IV and VII injector/extractor handles. There are 64 different keying options in total for each guide rail. When the upper and lower guide rails are both keyed, this produces a total of 4,096 different combinations. Color Grey Red Plastic, self-extinguishing to L 94-V0 00 keys Accessories: Keying tool for simple assembly of up to 3 coding keys According to PICMG 2.0, IEC and IEEE 0.0 Position Position 2 Position 3 Position 4 Keying Tool For simple assembly of keys. p to 3 coding keys may be fitted simultaneously. An integral alignment pin makes positioning easier Plastic, L 94-V0, self-extinguishing keying tool EMC Gaskets, Vertical Version Version 2 To ensure EMC protection between -channel front panels and subrack panel. There is a choice of two versions: Version : Segmented Version 2: One-piece Version : Segmened Stainless steel Version 2: One Piece Holder Kit For attaching the. Only required at the top of 3 front panels. Die-cast Assembly screws should be ordered separately: For attaching of to holder Front Panel to holder 00
7 Smart Protection With CompactPCI Front Panels Single Handle Panels 4 HP > 4 HP EMC Front Panels For s (-Channel) For Single Handles 4 HP 6 >4 HP 6 4HP 8HP 2HP 6HP mm aluminum extruded Finish: clear chromated 3 3 For CompactPCI handles, see pages For filler panels, see pages EMC (-channel) 3 EMC Front Panel Kits With (Single) Type IVs Handles Kit Includes: -channel front panel piece holder piece EMC gasket piece Injector/ejector handle assembly piece, black Assembly parts HP Kit No EMC Front Panel Kits With (Single) Type IVs Handles Kit Includes: -channel front panel piece EMC gasket piece Injector/ejector handle assembly 2 pieces, black Assembly parts Order optional holders separately. HP Kit No Multiple Handle Panels >4 HP Material removed 3 >4 HP 6 EMC Front Panels For s (-Channel) For Multiple Handles 8HP mm aluminum extruded Finish: clear chromated EMC Gaskets Kit No. 0 pcs stainless steel When multiple handles are used, please lock the handles with the tying pin. See page 98. 0
8 Smart Protection With Kaparel/Rittal VME and VME64 Extension Front Panels Single Handle Panels 4 HP > 4 HP VME Non-EMC Front Panels For s (Flat) For Single Handles 4 HP 6 >4 HP 6 4HP 8HP 2HP 6HP mm aluminum sheet Finish: anodized HP = 5.08 mm (0.2") 3 3 VME64 Extension EMC Front Panels For s (-Channel) For Single Handles 4HP 8HP 2HP 6HP For cpci handles, see pages For filler panels, see pages VME Non-EMC (flat) VME64 Extension EMC (-channel) mm aluminum extruded Finish: clear chromated Multiple Handle Panels >4 HP Material removed >4 HP VME Non-EMC Front Panels For s (Flat) For Multiple Handles 8HP VME64 Extension EMC Front Panels For s (-Channel) For Multiple Handles 8HP mm aluminum sheet Finish: anodized HP = 5.08 mm (0.2") mm aluminum extruded Finish: clear chromated When multiple handles are used, please lock the handles with the tying pin. See page 98. EMC Gaskets For EMC Front Mount Panels 0 Piece Kit stainless steel 35
9 ±0. 3.5± ± Maximum space on front end 3= ± ± ±0. 3.5± = / 9 = = ±0./ ± ± ± Maximum space on front end 6=24.5, 9= = / 9 = = / Front Panel Layout Dimensions CompactPCI Front Panels VME 64x 3 Front Panels VME 64x 6 And 9 Front Panels 4HP ± Ø B (HP) 7.5±0. B csk HP B B2 B3 B4 Tolerance X X HP B (HP) B Ø B 0±0. 3.4± ±0. 0.± ±0. 6 = ±0. / 9 = 389.2±0. Component Side Top View VME Non-EMC Flat Front Panel B - X 2 0.0±0. 3.4± ±0. 0.± ± B 3 + X B - X VME 64x EMC -Channel Front Panel 2 3 Front panel Holder To be used for 3 s on the top end and 6 s in the middle (optional) piece Kit No pieces die cast aluminum Note: An electronic file of these drawings is also available. Please contact Rittal. 36
10 ±0. 3.5± ± Maximum space on front end 3= ± ± ±0. 3.5± = / 9 = = ±0./ ± ± ± Maximum space on front end 6=24.5, 9= = / 9 = = / Front Panel Layout Dimensions CompactPCI Front Panels n 3 Front Panels 6 And 9 Front Panels 4HP ± Ø B (HP) 7.5±0. B csk HP B B2 B3 B4 Tolerance X X HP B (HP) B Ø B 0±0. 3.4± ±0. 0.± ±0. 6 = ±0. / 9 = 389.2±0. Component Side Top View Non-EMC Flat Front Panel B - X 2 0.0±0. 3.4± ±0. 0.± ± B 3 + X B - X EMC -Channel Front Panel 2 3 Front panel Holder To be used for 3 s on the top end and 6 s in the middle (optional) piece Kit No pieces die cast aluminum Note: An electronic file of these drawings is also available. Please contact Kaparel/Rittal. 02
11 Drive Chassis Vertical And Horizontal Horizontal Drive Chassis Non-EMC Type H (Horizontal) Drive Chassis For 2, 4, and 6 Ripac Vario Drive Chassis Subracks Drives are H (horizontally) mounted Front removal drive chassis Will accept 5/4" HH (CD-ROM) or 3/2" drives Backplane pluggable for 3/2" drives Inquire for custom backplane designs 3 /2" Drive Chassis With Cut-Out For Drive No. of drives H W aluminum extruded Finish: clear chromated 3 /2" Drive Chassis With Cut-Out For 2 Drives No. of drives H W Dual Drive Brackets With Cut-Outs For 2 Drives Including Mounting Parts Bracket Kit No. pair aluminum extruded Finish: clear chromated 5 /4" HH Drive Or CD-ROM Chassis With Cut-Out For Drive No. of drives H W All dimensions are in millimeters (mm) Vertical Drive Chassis EMC HP H M2.5 type thread EMC Gasket EMC design Drives are V (vertically) mounted Front removal drive chassis Will accept 5.25" HH (CD-ROM) or 3.5" drives Suitable for Ripac EMC and Non-EMC subracks Vertical Drive Chassis Support Guides: Provide for a rigid support of the drive chassis in the cpci system. Made of aluminum extrusion and are bolted on the top/bottom, front/rear horizontal rails. Each kit includes two (2) guides and mounting parts suitable for mounting one () vertical drive chassis. Order No: kit Vertical Mounted EMC Drive Chassis: Front panel: Aluminum extruded Finish: Clear chromated Side plate: Sheet aluminum Finish: Clear chromated Front Approximate Front Drive panel depth panel Kit No. HP of drive H W x 3.5" x 3.5" x 5.25" x 3.5" x x x x x 5.25"
12 Accessories n Solder Side Covers And Panel Adaptersn Solder Side Covers A protective solder cover mounted over the 2 (back) of the may be required to prevent damage of back s when cpci front mounted modules and/or cpci rear mounted I/O modules are installed/extracted from the subrack (cpci system). All cpci modules having back s or through-hole pins should provide a means for mounting a protective cover (solder cover). The positioning and the hole size for cpci solder cover mounting holes are defined in IEEE 0. Annex A and PICMG 2.0. While the solder covers are optional per PICMG 2.0, the PICMG 2. hot swap specification shall provide a means for mounting a protective cover (solder cover). Kaparel/Rittal offers two types of cpci solder covers solid and vented. Solder covers are mounted to the back of the cpci module at the front panel end with the existing to front panel mounting screw and on the connector with the plastic (removable) retention clip. Configuration: Pentastat SC660/050C L 94-VO Anti-static Surface resistivity of x00 Ω/q Thickness.09"/0.5 mm Clear color Maximum temperature: +62 F/+72 C Non-washable Non-toxic, non-contaminating, reusable, recyclable Specifications: IEEE 0.0 IEEE 0. Annex A PICMG 2.0 PICMG 2. L 94-VO (meets or exceeds MIL-B-8705-C) Yellow board QMFZ 8; E7348A and E7348B cpci Solder Side Covers - Solid Description For size Qty Solder cover - solid 6 x 60 mm Solder cover - solid 6 x 80 mm Solder cover - solid 3 x 60 mm Retention clip cpci Solder Side Covers - Perforated With 2 mm Holes Description For size Qty Solder cover - perforated 6 x 60 mm Solder cover - perforated 6 x 80 mm Solder cover - perforated 3 x 60 mm Retention clip Front Panel Adapters A typical application is when a 3 x 4 HP EMC plug-in unit is installed into a 6 system. This adapter kit provides for an additional 3 EMC filler front panel to be attached to the top end of the CPCI EMC front panel via a bracket. Note: The top handle is optional Board Adapters A typical application is when two 3 CP boards are on top of each other, creating a 6 board system, where the enviroment requires two times P/J-P2/J2 (typically two 3 32-/64-bit CPCI boards in one slot). This kit provides for an adapter plate (FR4) to connect two CompactPCI boards to the front panel and solder cover (back cover) mounting holes. A modified 6 front panel is required; please inquire for additional information Ø2.70 CSK 4 places
13 n Accessories PMC Or CMC Front Panels And Covers PMC Or CMC Front Panels PMC Front Panels Support Spacer For PCI mezzanine boards (PMC). Conforms to IEEE 386(CMC)/386.(PMC) Die-cast zinc front panel Accessories: EMC sealing ring and gasket see below For PCI mezzanine boards (PMC). Conforms to IEEE 386(CMC)/386.(PMC) Extruded aluminum section, clear chromated front panel Accessories: EMC sealing ring and gasket see below 0 mm, for mounting mezzanine boards. support spacer Covers To conceal unused mezzanine cutouts in 3 and 6 front panels. The covers are simply clipped into the cutouts EMC Seals For inserting into the all-round channel of the mezzanine front panels. Material/Surface Finish: Sealing ring made form conductive carbon filled silicon, sealing gasket made from stainless steel Options Sealing ring Sealing gasket Assembly Screws And Keying Assembly parts for all PMC s are M2.5x6 inch screws. To ensure use of correct voltage of mezzanine parent boards. The keying pins are bolted onto the boards. Assembly Parts Keys
Pixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 96.524.8242 CAN: 59.885.5775 Product Diversity
More informationPERFECT HANDLING. PCB Front Panels & Injector/Extractor Handles... Package Your Electronics With Ripac.
Front Panels & Injector/Extractor Handles... PERFECT HANDLING. Package Your Electronics With Ripac. When it comes to electronics, no one handles today s demanding applications better than Rittal Ripac
More informationRipac VME/VME64x Systems. Applications. Design Features
Overview Of Systems For VMEbus Ripac VME/VME64x Slim-Box Ripac VME/VME64x Systems Ripac VME/VME64x Systems 1, 2, 3, 4U/2, 4, 6, 8 slot in AC input Order No. see pages 110-112 For backplanes see page 60
More informationKM6-II Subracks. APW Electronic Solutions. 152 APW Electronic Solutions Toll Free (800) Fax: (858)
KM6-II Subracks Fully compatible with DIN41494 part 5 and IEC60297-3. KM6-II Standard is available in kit form, offering quick and simple assembly. KM6-II Universal is a highly versatile subrack system,
More information2: Front Panels for Plug-In Units
C 2: Front Panels for Plug-In Units 2.1 Plug-In Units acc. to IEC C 2_3 2.1.1 Extruded Front Panel C 2_3 2.1.2 Front Panel with Cutout for IEC Ejector Handle C 2_5 2.2 EMC Plug-In Units acc. to IEC C 2_6
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CAN: 519.885.5775 Order Information
More information3: Handles. 3.1 Fluted Handles C 3_ Rigid-Mounted Unit Handles C 3_ Ejector Handles acc. to IEC C 3_4
3.1 Fluted Handles 3_2 3.2 Rigid-Mounted Unit Handles 3_3 3.3 Ejector Handles acc. to IE 3_4 3.4 Injector/Ejector Handles acc. to IEEE 3_6 3.4.1 Ergonomic IEEE Standard Injector/Ejector Handle 3_6 3.4.2
More informationSubracks. Subracks, 2U-9U, 19-21HP wide KEY FEATURES INDUSTRIES
Subracks KEY FEATURES INDUSTRIES Modular extruded aluminum design For housing custom backplanes and motherboards with front (and/or rear) pluggable modules. (If standard architecture backplane is required,
More informationcpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies
cpci-e3 series Cutting Edge, Push Button, Locking Ejector for CompactPCI Assemblies IEEE 1101.10 and PICMG 2.0 Compliant Compact size and unique aesthetics Innovative positive locking, simple push button
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 916.524.8242 CN: 519.885.5775 Contents Kaparel/Rittal
More informationVEROTEC Electronics Packaging
VEROTEC Electronics Packaging KM6-HD Subracks 1 KM6 Subracks KM6-HD Subracks Value Added Services from Verotec CUSTOM KM6-HD SUBRACKS TecServ is the vehicle by which Verotec delivers its value added services.
More informationFront Panels, Handles and Plug-in Units
Front Panels, Handles and Plug-in Units Chapter Overview 1. Front Panels for Sub Racks and Enclosures Flat front panels EMC flat front panels Fan front panels Hinged front panels 2. Front Panels for Plug-In
More informationVEROTEC Electronics Packaging
VEROTEC Electronics Packaging KM6-HD Subracks Introduction: KM6-HD subracks KM6-HD HEAVY DUTY CARD FRAME Introduction The KM6-HD subrack system, although primarily designed for military use, would suit
More information100% RoHS compliant Front Panels, Handles & Accessories
100% RoHS compliant Enclosures & Components Comprehensive range of products and services for board manufacturers Front Panels, Handles & Accessories Enclosures & Components Backplanes System Platforms
More informationThis Datasheet for the IC697CHS790. Rack, 9 Slots, Rear Mount.
This Datasheet for the IC697CHS790 Rack, 9 Slots, Rear Mount. http://www.cimtecautomation.com/parts/p-14771-ic697chs790.aspx Provides the wiring diagrams and installation guidelines for this GE Series
More informationModules Front panels OVERVIEW MAIN KATALOG STANDARDS
Front Panels Main Catalogue Modules OVERVIEW MAIN KATALOG Cabinets....... 1 Wall mounted cases......... 2 Accessories for cabinets and wall mounted cases.. Climate control.. 4 Electronics cases.........
More informationSUBRACKS. A minimum of components a multitude of applications
SURCKS minimum of components a multitude of applications SURCKS he modular concept of Ripac subracks facilitates a wide range of application options with a minimum of components. ll Ripac subracks are
More information07. har-link INTERFACE CONNECTORS
. INTERFACE CONNECTORS The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationEjector Handles, Front Panels & Accessories. cpci, VME/64, VPX, VXS. Elma Electronic
Ejector Handles, Front Panels & Accessories cpci, VME/64, VPX, VXS Elma Electronic Front Panels and EMC Springs Front Panels for Handles or Card Holders Panels for Use With Continuous EMC Gasket Grained,
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationEuropacpro Industrial Applications
Europacpro Industrial Applications for industrial applicationsdmain Catalogue Subracks EuropacPRO for Industrial Applications OVERVIEW MAIN KATALOG Cabinets....... 1 Wall mounted cases......... 2 Accessories
More information1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack.
T Accessories n Subrack Cooling n Vertical Cooling From Bottom To Top D 1 Airflow via normal convection or forced-air cooling devices in the enclosure or housing outside of the subrack. 2 Vertical forced
More informationModel 720 Electromechanical Hour Meter
Model 720 Electromechanical Hour Meter A 5 figure (reset) or 6 figure (non-reset), AC hour meter encased in a rugged steel housing and designed to mil-spec environmental requirements. The non-reset models
More informationvme, vme64x, vxs, vpx
vme, vme4x, vxs, vpx VME, VME4x, VXS, VPXMain Catalogue Systems VME, VME4x, VXS, VPX OVERVIEW MAIN KATALOG Cabinets....... 1 Wall mounted cases.......... 2 for cabinets and wall mounted cases.. 3 Climate
More informationAPPENDIX RACK PRODUCT
APPENDIX RACK PRODUCT KEL CORPORATION CompactPCI BUS RACK CPCIR System rack correspond to. (CompactPCI bus backplane) KEL can meet requirements for custom-made subracks with the KEL Custom Rack Series
More informationPACSystems* RX3i IC695ACC650
September 2012 PACSystems* RX3i IC695ACC650 Series 90-70 to RX3i Conversion Rack The conversion rack provides a solution for converting an existing Series 90-70 system to PACSystems RX3i, minimizing outage
More informationCompactPCI PowerConnector
CompactPCI PowerConnector Table of Contents 1 Introduction............................................................. 2 Product Features......................................................... 3 Performance
More informationTopConsole system TP. Combination options 1-part 2-part 3-part. System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389
opconsole system P System accessories Page 537 Monitors, keyboards From page 796 Climate control Page 389 Enclosure: Sheet steel 1.5 mm Door and console cover: Sheet steel, 2.0 mm, all-round foamed-in
More informationFOR PC BOARD TO FLAT CABLE
AXM FOR PC BOARD TO FLAT CABLE MIL CONNECTORS (AXM) Density mounting Long lever type Short lever type Compliance with RoHS Directive FEATURES 1. High density mounting is possible. Even with mounting right
More informationVertiv VR Rack 1.0 GENERAL
1.1 SUMMARY Vertiv VR Rack Guide Specifications 1.0 GENERAL This specification defines the mechanical characteristics and requirements for the Vertiv VR Rack. A series of adaptive and scalable electronic
More informationPLC Racks IC697CHS782/783
5 1 PLC Racks IC697CHS782/783 (IC697CHS782/783) datasheet Features Accepts 3rd Party VME modules which require 0.8 spacing. Accepts all IC697 PLC module types. Rear mount rack mounts in a 10 (254 mm) deep
More informationPreset counters, electromechanical
The electromechanical preset counters (with manual reset) boast a robust construction. They are ideal for use in harsh industrial environments as stand-alone counters or as plugin variants in combination
More informationSpecifications. Description. Degree of Protection. Input Voltage (Relay type) Input Voltage (Solid-State type) Electrical Design Life (Relay type)
General Principles 9-10-Safety Logic Power General Purpose 800Z-GF2Q5 Heavy Industrial 800Z-HF1 General Purpose 800Z-GL3Q5B Heavy Industrial 800Z-HL1Y Bulletin 800Z Zero-Force are designed for use by machine
More informationmodular enclosure MUREVA, IP65 weatherproof & versatile enclosures aesthetics multi-functional evolutionary ergonomics and time saving security
aesthetics c Elegant and robust design. c Colour easy to integrate in any environment. weatherproof & versatile enclosures multi-functional c Different solutions for: industrial control, electrical distribution,
More informationPixus Technologies Catalog
The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products www.pixustechnologies.com sales@pixustechnologies.com US: 631.360.1257 CAN: 519.885.5775 Overview of Rittal
More information07. har-link Interface Connectors
. Interface Connectors The highest data rates in combination with perfect shielding characterize the connector. This way data can be passed on optimally within the control cabinet. The locking mechanism
More informationUser's Manual CPCI Basic 3U, 30HP CPCI Basic 3,5U, 42HP
User's Manual CPCI Basic 3U, 30HP CPCI Basic 3,5U, 42HP www.hartmann-elektronik.de Rev. 1.2 Rev: R 1.0 26.05.2010 Borutta R 1.1 12.08.2010 Friedrich R 1.2 09.08.2011 F. Minich Impressum: Hartmann Elektronik
More informationERNIPRESS Trapezoidal-Connectors Series TMC
ERNIPRESS Trapezoidal-Connectors Series TMC Subminiatur-D Connectors to DIN 41 652/IEC 807-3 with Press-fit zone General Solderless press-in technology for connectors in bus systems permits rationalized
More informationGV-EL124S Electric Strike
GV-EL124S Electric Strike Featured with a built-in door status sensor, the GV-EL124S is a fail-secure electric strike, but it is field convertible from fail secure to fail safe. It can be mounted either
More informationSensor Accessories Retroreflectors and Retroreflective Tape Sensor Mounting Brackets Sensor Accessories. 52.
Retroreflectors Sensor Accessory AC Sensor Tester/Demonstrator Pilot Device E65 Control Unit.1 Retroreflectors and Retroreflective Tape Product............................................. 414 Application..........................................
More informationSpecial-Purpose Proximity Sensor E2C
Special-Purpose Proximity Sensor E2C Cylindrical Inductive Sensors with Separate Amplifiers Provide Variable Detecting Capabilities Separate amplifier allows sensor to fit in space-confined sites, providing
More informationTS series Proportional Hall effect thumbsticks
Distinctive features and specifications 1 or 2 axis Pushbutton handle option Non-contact Hall effect technology Submersible to 1m (3.28ft) per IP68 Threaded metal housing option Redundant outputs available
More information1993 Specifications CSJ SPECIAL SPECIFICATION ITEM Transportation Management Console
1993 Specifications CSJ 0598-01-057 1.0 Description SPECIAL SPECIFICATION ITEM 6398 Transportation Management Console This Item shall govern for the furnishing and installation of Transportation Management
More informationCA2-FUNK CompactPCI to PCI Adapter
CA2-FUNK CompactPCI to PCI Adapter As an industrial standard, the CompactPCI bus is a modular solution for configuring industrial grade PC systems. Todays market is offering a broad variety of CPCI I/O
More informationNot recommended for use in applications where there is high probability for exposure to liquid (e.g., cutting fluid) on the sensing surface area.
Bulletin Z Product Overview Bulletin Z Bulletin Z Zero-Force Touch Buttons are ideally suited for use in two-hand machine control systems and highly repetitive applications. Ergonomic Design The contour
More informationInductive dual sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position of rotary actuators Mounting
More informationFISCHER MINIMAX TM SERIES
TECHNICAL SPECIFICATIONS FISCHER TM SERIES Fischer Connectors SA All rights reserved Web version 1.0-03.2016 Changes without prior notice FISCHER TM SERIES KEY FEATURES The Fischer MiniMax Series increases
More informationElma Bustronic CompactPCI Reference Sheet
Elma Bustronic CompactPCI Reference Sheet Rev. 4 5.10.10 The cpci reference sheet provides relevant reference material for the CompactPCI product line. The information provided may change at anytime. Elma
More informationSwitches and Indicators 84
Switches and Indicators 84 84 Switches and Indicators Index Series 84 Description Page 177 Product Assembly Page 178 Mounting Instruction Page 179 Product Range - pushbuttons for flush mounting - accessories
More informationUS FUTABA. M 19 x 1.25 Ø 8. ESTABLISHED mm. Unlocked Locked LOCKS Door Thickness mm. 18.
ked 38.5 mm 9 M 19 x 1.5 ESTABLISHED 1983 18 mm 3 mm Ø 3.5 4 mm 46 6.7 mm.5 mm 4. mm 6.5 1 Ø 8.65 mm 31 mm 6 mm mm 18.4 mm 17.6 mm Ø Diam Cylind Unlocked 6.7 mm 3 mm 31 5 9 86.8 17 8.5 Locked 4 4 19.5
More informationML200 Fanless Mini-ITX Enclosure
ML200 Fanless Mini-ITX Enclosure Assembly Guide Version 1.1 PN: ML200 1 Table of Contents I. Product Description... 3 II. Included Parts... 3 III. Basic Chassis Assembly... 5 IV. Installation... 12...
More informationzqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe
zqsfp+ Behind Bezel Cage Assembly, Heat Sink, and Light Pipe Application Specification 114-32023 02 MAR 12 NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions
More informationInductive sensor For rotary actuators NI4-DSU35TC-2Y1X2/S933
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationD-Sub SEaled subminiature D connectors, 2.54 mm pitch
SE D-Sub SEaled subminiature D connectors, 2.54 mm pitch Page Technical characteristics.......................................... 02 IP 67 versions with turned solder cups......... 04 IP 67 versions with
More informationPulse counters, electromechanical
B 6 / B 8 The standard totalizers B 6 (with manual reset) and B 6, B 8 (without reset) offer a robust construction. They are ideal for use in harsh industrial environments as individual counters or as
More informationPACSystems RX7i IC698CHS009/119
January 2010 The RX7i rack can be used for all RX7i CPU and I/O configurations, Series 90-70 I/O, and VME modules. Backplane connectors are spaced on 0.8" (20.3mm) centers to accommodate single-width RX7i
More informationDescription of parts Panel mounting Insert mounting without/with Carrier element Plastic housings
- Contents Page Features -... 11.02 Component range -... 11.03 Description of parts... 11.04 Latching parts without/with Strain relief and Panel mounting parts... 11.06 Panel mounting... 11.08 Insert mounting
More informationHARTING. Interface Connectors. People Power Partnership
11 5 HARTING Interface Connectors People Power Partnership Directory chapter 00 Modular metric high speed connectors, 2.0 mm pitch Page connector system general information......................... 00.04
More informationCompactPCI Power Backplanes , , ,
Users guide CompactPCI Power Backplanes 23098-393, 23098-394, 23098-395, 23098-396 PICMG 2.11 defines the mechanical and electrical interface for pluggable power supplies in 3U or 6U height for powering
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationInductive sensor Dual sensors with extended temperature range NI4-DSU35TC-2Y1X2/S97
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex-zone 20 for temperatures up to -25 C SIL2 acc. to IEC 61508 Rectangular, housing DSU35 Plastic, PP-GF30-VO Two outputs for monitoring the position
More informationRUGGED MILITARY GRADE
R4U-20A RUGGED MILITARY GRADE COTS Plus 4U ENCLOSURE Optimized for High Shock / Vibration Environments C6CHASSIS SYSTEMS ENGINEERED TO PERFORM The R4U-20A is designed to survive! Aircraft grade aluminum
More informationINSTRUCTION MANUAL RA 19-4B RACK ADAPTER HOT SWAP RACK ADAPTER FOR HSF SERIES POWER SUPPLIES
INSTRUCTION MANUAL RA 19-4B RACK ADAPTER HOT SWAP RACK ADAPTER FOR HSF SERIES POWER SUPPLIES KEPCO INC. An ISO 9001 Company. MODEL RA 19-4B RACK ADAPTER ORDER NO. REV. NO. IMPORTANT NOTES: 1) This manual
More informationCPCI System Subrack 1 U
User s Manual Product No.: Doc-No: 63972-165_R1.0 January 14, 2008 Rev. Date updated Change R1.0 January 14, 2008 Initial Release Impressum: Schroff GmbH D-75334 Straubenhardt, Germany The details in this
More informationMIC-3001/8. 3U/4U CompactPCI. Enclosure for Rackmounting
MIC-3001/8 3U/4U CompactPCI Enclosure for Rackmounting Copyright Notice This document is copyrighted, 1999. All rights are reserved. The original manufacturer reserves the right to make improvements to
More informationInductive sensor For rotary actuators NI4-DSU35TC-2Y1X2
ATEX category II 2 G, Ex zone 1 ATEX category II 1 D, Ex zone 20 SIL2 (Low Demand Mode) acc. to IEC 61508, PL c acc. to ISO 13849-1 at HFT0 SIL3 (All Demand Mode) acc. to IEC 61508, PL e acc. to ISO 13849-1
More informationFW FIELD TV. IEEE 1394 Connection System for Harsh Environments. Description. Applications
Description FW FIELD TV IEEE 1394 Connection System for Harsh Environments FW Field allows you to use a standard IEEE1394 connection in harsh environments: Sealed against fluids and dusts (IP67) Shock,
More informationINSTRUCTION MANUAL RA 19-5B RACK ADAPTER HOT SWAP RACK ADAPTER FOR HSF SERIES POWER SUPPLIES
INSTRUCTION MANUAL RA 19-5B RACK ADAPTER HOT SWAP RACK ADAPTER FOR HSF SERIES POWER SUPPLIES KEPCO INC. An ISO 9001 Company. MODEL RA 19-5B RACK ADAPTER ORDER NO. REV. NO. IMPORTANT NOTES: 1) This manual
More informationSECTION CONTENTS COMPUTER BRACKETS COMPUTER BRACKET WORKSHEET MOUNTING BRACKETS
PC BOARD HARDWARE SECTION CONTENTS COMPUTER BRACKETS........... 123-125 COMPUTER BRACKET WORKSHEET. 126-127 MOUNTING BRACKETS................ 118-119 PC BOARD ACCESSORIES Board Guides..........................
More informationIntroduction. The information pages provide standard data common to all D-subminiature connectors. These include:
Connectors Information Introduction The D-subminiature is one of the most popular styles of connectors in the I/O category. It is used in computer, telecom, datacom, medical, and test instrumentation applications
More informationP160 User s Manual Manuel de l utilisateur Anwenderhandbuch Manuale per l operatore Manual del usuario
P10 User s Manual Manuel de l utilisateur Anwenderhandbuch Manuale per l operatore Manual del usuario At Antec, we continually refine and improve our products to ensure the highest quality. So it's possible
More informationThermal-Magnetic Circuit Breaker 2216-S
Thermal-Magnetic Circuit Breaker 226-S Description One and two pole thermal-magnetic circuit breaker in compact design with slide actuator, trip-free mechanism, various trip characteristics and optional
More informationKnurr Miracel Server Rack
Knurr Miracel Server Rack Knurr Server Racks are featured in these Scenarios: Scenario A 1-2 Rack page 8 Scenario C 3-6 Racks page 12 Scenario D 7-10 Racks page 14 Scenario E 10-30 Racks page 16 Scenario
More informationRobust Clamps Shock-proof load range
Robust Clamps Shock-proof load range Your application takes centre stage Robust Clamps Stainless steel Features: Extremly strong Vibration proof Impact and shock load... specific demands require specific
More informationCONCEPT Stainless Steel Wall-Mount Enclosures
CONCEPT Stainless Steel Wall-Mount Finish are unpainted. Door and body have smooth #4 brushed finish. Optional CONCEPT panels are white painted or zinc-plated. Optional NEMA panels are white painted, zinc-plated,
More informationINSTRUCTION MANUAL RA 59 RACK ADAPTER. 1) This manual is valid for the following Model and associated serial numbers: MODEL SERIAL NO. REV. NO.
INSTRUCTION MANUAL RA 59 RACK ADAPTER KEPCO INC. An ISO 9001 Company. MODEL RA 59 RACK ADAPTER ORDER NO. REV. NO. IMPORTANT NOTES: 1) This manual is valid for the following Model and associated serial
More information3M I/O Connector Mounting Options and Hardware
M I/O Connector Mounting Options and Hardware Hardware Guide Date Modified: July 20, 2009 Part Number Type Mounting Hardware Applications - Table 1 Mini D Ribbon (MDR) Conn. s D Sub Conn. s D Ribbon Conn.
More informationHan PCB termination. Han-Fast Lock PCB adapter for Han DD PCB adapter for Han DDD module
Han termination Contents Page Han-Fast Lock... 20.11 adapter for Han DD... 20.13 adapter for Han DDD module... 20.16 adapter for Han 40 A Axial module... 20.18 adapter for Han E... 20.20 adapter for Han
More informationJunction Boxes & Enclosures JBEP and ECEP Series: Undrilled Fiberglass Reinforced Polyester Enclosures Increased Safety
CSPe Type Small Version CAe Type Non-Hinged Version CAe Type Hinged Versions Compliance Data: ATEX - IECEx: Zone 1 & 1 & ATEX II GD IECEx CE Ex e II T6 to T Ex td A1 T75 C to T95 C Ex ia IIC; Ex ib IIC
More informationHT series Ruggedized Hall effect joysticks
Distinctive features and specifications Rugged finger positioning control Available with CANbus J1939 Available with USB 1.1 HID compliant interface 1, 2 and 3 axis configurations 1 million life cycles
More information* * Agilent Power Distribution Unit (PDU) Installation Guide
Agilent Power Distribution Unit (PDU) Installation Guide For use with Agilent PDU kits and PDU installation kits for Agilent instrument racks June 2008 Edition 7 E0608 *5000-0039* 5000-0039 Notice The
More informationXL 4000 metal free-standing enclosures and cable compartments
87045 LIMOGES Cedex Telephone : 05 55 06 87 87 Fax : 05 55 06 88 88 XL metal free-standing enclosures and CONTENTS PAGE 1. General characteristics...1 2. Range...2 3. Overall dimensions...2 4. Equipment...3
More informationIP68 Sealed - Mini USB Buccaneer
IP68 Sealed - IP68 Over moulded assembly provides IP68 cable seal Coupling ring, screw thread provides secure cable coupling Mini USB connector O ring maintains IP68 seal at connector interface Mini USB
More informationMIC-3001/8. 3U/4U CompactPCI Enclosure for Rack Mounting. User Manual
MIC-3001/8 3U/4U CompactPCI Enclosure for Rack Mounting User Manual Copyright The documentation and the software included with this product are copyrighted 2004 by Advantech Co., Ltd. All rights are reserved.
More informationTYPE 4/12 PREMIER SERIES
Type 4 / 12 Enclosures TYPE 4/12 PREMIER SERIES ENCLO- Contemporary Contemporary Design Design Seamless Seamless Foam-In-Place Foam-In-Place Gasketing Gasketing Utility Utility Brackets Brackets for for
More informationRUGGED SYSTEMS 12R1/12R2/12RC ATR ENCLOSURES ACCESSORIES SHELF MANAGEMENT BACKPLANES. Rugged COTS: Products and Services. Elma Electronic
RUGGED SYSTEMS 12R1/12R2/12RC ATR ENCLOSURES ACCESSORIES SHELF MANAGEMENT BACKPLANES Rugged COTS: Products and Services Elma Electronic Elma Electronic ABOUT ELMA Founded in 1962, Elma is an industry innovator
More informationCPCI System Subrack 3 U
User s Manual Product No.: Doc-No: 63972-227_R1.1 April 18, 2011 Rev. Date updated Change R1.0 January 14, 2008 Initial Release R1.1 April 18, 2011 Fan Tray with mini compression latch Impressum: Schroff
More informationVandal-proof latching action switch MSM LA
Product Manual Vandal-proof latching action switch MSM LA CONTENTS 1 PRODUCT DESCRIPTION... 2 2 TECHNICAL DATA AND DIMENSIONAL DRAWINGS... 2 2.1 Technical Data... 2 2.2 Dimensional Drawings... 5 2.3 Hole
More informationInstalling the Cisco ADE 2130 and 2140 Series Appliance Hardware Options
CHAPTER 4 Installing the Cisco ADE 2130 and 2140 Series Appliance Hardware Options This chapter provides instructions for installing, replacing, and removing various hardware options in your Cisco ADE
More informationPanel Enclosures. Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet
Panel Enclosures Wall-Mount Enclosures Type 12 Premier Series Double-Door with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge steel (see page 153) All continuous
More information8Rectangular Pin and Socket Connectors
AMPLIMITE Connectors, Subminiature Series Connectors 109 (Continued) Introduction Product Facts Military qualified connectors conform to the latest amendments of MIL-DTL-24308 Industrial versions available
More informationData Sheet for Joysticks
Finger Joystick Series 87 Dual redundant outputs IP67 sealed lever heights: 8mm and 60mm 5 lever colors Series 87 is offering paddle joysticks of high precision and quality - claims that are not only supported
More informationM12 connector D-coding M12 connector X-coding RJ45 IP20 connector PushPull RJ45 IP65 / IP67 connector
M12 connectors Directory Chapter Page General information....02 M12 connector D-coding....06 M12 connector X-coding....20 RJ45 IP20 connector....27 PushPull RJ45 IP65 / IP67 connector....46 Han 3 A RJ45
More informationTerminal Junction System (MIL-T and Commercial)
Introduction Product Facts The TJS connections are inherently more reliable than conventional threaded and solder terminations. The user s wiring is crimped to gold plated pin contacts, conforming the
More informationReconfigurable Embedded Chassis with Integrated MXI-Express (x1) MXI-Express Switch
USER MANUAL Reconfigurable Embedded Chassis with Integrated MXI-Express (x1) This document describes the features of the and contains information about mounting and operating the device. Upstream Connection
More informationPush-Pull and E-Stop Switches. Datasheet
Push-Pull and E-Stop Switches Datasheet Honeywell Push-pull and E-stop switches are durable, environmentally sealed, sliding contact switches incorporating two circuits with multiple combinations. The
More informationCatalog C-035 Rev. C
Catalog C-035 Rev. C P O S I T R O N I C I N D U S T R I E S Today, some customer applications have requirements for high bandwidth transfer between VMEbus cards. Requirements which even the most updated
More informationJunction Boxes & Enclosures JBEA and ECEA Series: Aluminum Enclosures Increased Safety
PCe Type CAe Type Compliance Data: ATEX - IEC: ATEX IEC CE Ex ia IIC; Ex ib IIC T6 to T2 Ex td A21 T0 C to T290 C Ex de IIC Operating Temperatures: -40 C to +55 C (CAe) -55 C to +60 C (PCe) 223 ATX Product
More informationCPCI System Subrack 3 U
User s Manual Product No.: Doc-No: 63972-224_R1.1 April 18, 2011 Rev. Date updated Change R1.0 January 14, 2008 Initial Release R1.1 April 18, 2011 Fan Tray with mini compression latch Impressum: Schroff
More informationEthernet cabling. B Ethernet cabling. Ethernet cabling overview B 2. Cabling 4-poles IP 20 B.1 8 IP 65 / IP 67 B Cables B Tools B.
Ethernet cabling Contents Page B Ethernet cabling Ethernet cabling overview B 2 Cabling 4-poles B.1 8 B.1 22 Cables B.1 96 Tools B.1 104 Cabling 8-poles B.2 8 B.2 20 Cables B.2 90 Tools B.2 98 B 1 Profile
More information