Hardware Announcement 109-057, dated February 3, 2009 InfoPrint 4100 enhancements include new InfoPrint Version 7 toner for ultra high-speed models, pinless printing features, and improved reliability and print quality Table of contents 1 Overview 11 Product number 1 Key prerequisites 12 Technical information 1 Planned availability date 13 Terms and conditions 1 Description 13 Prices 10 Statement of general direction Overview InfoPrint Solutions Company, a Ricoh -IBM joint venture, announces the following enhancements for the InfoPrint 4100: InfoPrint Version 7 toner and developer optimized for high density print coverage at lower fuse temperatures available for the HS3, HD5, and HD6 A Universal Forms Control Sensor to streamline pinless (tractorless)* registration Improved paper cooling system (between printers) A Toner Collector Bag Switch to alert an operator to take action A Lower Tractor Jam Detection Sensor to increase printer availability. A Dual Vacuum Drive System to improve pinless print quality Direct Mail support for entry InfoPrint 4100 models to support 9-point stock paper A Pinless Forms ID feature to ensure the correct form is loaded Pinless support for MICR printing Modulated side-2 verify marks using the top of form mark on pinless paper to eliminate traditional marks on the paper Enhanced cutsheet emulation and remote terminal support * The terms "pinfed" and "pinless" may be used interchangeably with "tractored" and "tractorless" throughout this document and other InfoPrint Solutions documents. Key prerequisites InfoPrint 4100 Models MS1, MD1/2, HS2, HD3/4, HS3, HD5/6 Planned availability date February 20, 2009 Description Enhancements to the InfoPrint 4100 include the following. A detailed explanation of each item follows. InfoPrint is a registered trademark of Ricoh Co., Ltd. 1
Enhancement Package #1 (#9620) Universal Forms Control Sensor (#4571) Toner Collector Bag Switch (#4573) Lower Tractor Jam Detection Sensor (#4572) Dual Tractorless Vacuum Drive (#4575, 4576) Direct Mail (#4941) Tractored and Tractorless Forms Id (#4581) CCD with InfoPrint Version 7 Toner (#9478) Change CCD to InfoPrint Version 7 Toner (#9558) Support for Tractorless MICR printing Additional CCD with InfoPrint Version 7 Toner (#4488) Paper Cooling System - "L" (#9230, 4230) Paper Cooling System - "Inline" (#9231, 4231) Cooling System - "H" (#9232, 4232) Paper Walkover - 500 mm (Inline) (#4579) Paper Walkover - 750 mm ("L") (#4580) Enhancement Package #1 (#9620) - Initial order only Enhancement Package #1 (#9620) provides the following: Toner Collector Bag Sensor (#4573) Lower Tractor Jam Detection Sensor (#4572) Paper Underpass (RPQ #8B5867) Microcode Enhancements that include enhanced cutsheet emulation and remote terminal support Additional information for this feature: Minimum number of features: 0 Prerequisites: InfoPrint 4100 Model MS1, MD1/2, HS2, HD3/4, HS3, HD5/6 with the InfoPrint POWER tm Controller and version 15.6, or later, microcode Corequisites: Models HS3, HD5, and HD6: CCD with V7 Toner (#9478) Models MS1, MD1, MD2, HS2, HD3, HD4: None Compatibility conflicts: Cannot order feature number 9476 (Enhanced Printing Supplies Version 2) on the Models HS3, HD5, or HD6 with this feature Plant installation: Yes, feature number 9620 Field installation: No Universal Forms Control Sensor (#4571) This feature provides a registration sensor that is moveable across the entire width of a form. The capability provided by this sensor is normally most useful in a tractorless (pinless) environment. This sensor is also a look up/look down sensor that can read black marks on either side of the paper. It also allows items such as a customer logo (that are normally printed on a document) to be used as a registration mark. InfoPrint is a registered trademark of Ricoh Co., Ltd. 2
When a modulated registration mark is printed by printer #1, this sensor eliminates the need for a separate barcode for side-2 verification. Minimum number of features: 0 Prerequisites: InfoPrint 4100 Model MS1, MD1/2, HS2, HD3/4, HS3, HD5/6 with the InfoPrint POWER Controller (#4800, 9650) and version 15.6, or later, microcode Corequisites: None Compatibility conflicts: Cannot have feature number 4570 (Dual Toner/Mark Side Verify Sensor) Plant installation: Yes Field installation: Yes Toner Collector Bag Switch (#4573) - MES order only This feature provides a sensor to detect when the toner collector bag is full. An operator alert message is sent to alert the operator to change the toner collector bag. This positive detection of a full bag prevents the over-filling of the collection bag. Minimum number of features: 0 Prerequisites: InfoPrint 4100 Model MS1, MD1/2, HS2, HD3/4, HS3, HD5/6 with the InfoPrint POWER Controller and version 15.6, or later, microcode Corequisites: None Plant installation: No, can be ordered as part of feature number 9620 Field installation: Yes, feature number 4573 Lower Tractor Jam Detection Sensor (#4572) - MES only This feature provides a sensor that is installed prior to the transfer drum. This sensor looks across the width of the paper (in the scan direction) and can detect any "accordion" type irregularities in the paper. When these defects are sensed, the paper is stopped immediately. Early detection prevents paper jams as well as possible drum damage. The advantage is increased printer availability and decreased printer down-time for repair. Minimum number of features: 0 Prerequisites: InfoPrint 4100 Model MS1, MD1/2, HS2, HD3/4, HS3, HD5/6 with the InfoPrint POWER Controller (#4800, 9650) Corequisites: None Plant installation: Can only be ordered as part of feature number 9620 Field installation: Yes, feature number 4572 InfoPrint is a registered trademark of Ricoh Co., Ltd. 3
Dual Tractorless Vacuum Drive (#4575) - Initial order Dual Tractorless Vacuum Drive (#4576) - MES This feature improves tractorless (pinless) paper performance for heavy weight papers by providing dual tractorless vacuum drive units that maintain better paper tension during start stop. The advantages provided by the dual vacuum units include better print quality at startup and improved paper registration for tractorless printing. This feature requires that a form greater than 13 inches in width be used. This feature requires an InfoPrint 4100 Model HS2, HS3, HD3, HD4, HD5, or HD6. Minimum number of features: 0 Prerequisites: InfoPrint 4100 Models HS2, HS3, HD3, HD4, HD5, or HD6 Corequisites: None Limitations: This feature requires that a form greater than 13 inches in width be used. Plant installation: Yes, feature number 4575 Field installation: Yes, feature number 4576 Tractored and Tractorless Forms Identification (#4581) This feature is an enhanced version of the previous forms ID feature (#4464). Enhancements include: Both tractored and tractorless modes are supported. The previous feature only supported tractored. Simplified configuration options since this feature does not use a pre- or post-processing slot. The Tractored and Tractorless Forms Identification feature ensures that the form required for a specific application, or print job, is actually the form loaded in the selected printer. The identification is performed by comparing a barcode on the form to the form defined in the print job. The value of the Forms Identification feature includes increased operations performance and quality, reduced operations costs, and improved operations control. This feature consists of a mark sensor, associated electronics, mounting brackets, cabling, and microcode, which are ordered and installed on a per-print-engine basis. The Forms Identification feature reads a preprinted barcode as the form is moving through the printer. The form barcode is checked at two levels: First, it is checked at the host where the form barcode specified in the Define Form configuration is compared to the form defined by VFYSETUP. Second, the barcode specified in the Define Form configuration is compared to the form number read from the preprinted barcode on the loaded form. If the forms identification barcode specified in the Define Form configuration does not match the forms identification number specified by the VFYSETUP, then the host will not send the job to the printer. Therefore, the forms identification barcode specified in the Define Form configuration must match the forms identification number read from the loaded form or the printer is stopped with a form mismatch error. The use of this feature requires that a barcode be preprinted on the forms. The barcode is a custom binary barcode that can represent up to 65,535 decimal form numbers. For those InfoPrint is a registered trademark of Ricoh Co., Ltd. 4
customers who are using alphanumeric form numbers, some restrictions do apply. The alpha characters are limited to A, B, C, D, E, and F, and the number is limited to four characters. When using the alpha characters for specifically assigned purposes, the form number is assumed to be hexadecimal. The translation from form number to barcode is directly from that four-character hexadecimal form number to the binary barcode. When using alpha characters in the form number, you must take care not to duplicate the decimal equivalent form number. A specification describing the barcode, its position, and orientation is available in the latest Form Design Reference. Also, Professional Services can be contracted to produce the required artworks for you and your forms vendor, as well as assist you in FORMDEF updates. In a duplex system, if only printing duplex print jobs, only one feature is necessary and it must be ordered and installed in print engine 1. If the duplex system is also being used in the dualsimplex mode, and forms identification is required, then two features, one feature for print engine 1 and one feature for print engine 2, must be ordered and installed. Minimum number of features: 0 (per printer engine) Prerequisites: An InfoPrint 4100 Models HS2, HS3, MS1, HD3, HD4, HD5, HD6, MD1, MD2 Compatibility conflicts: Cannot be installed with feature number 4464 Corequisites: InfoPrint POWER Controller (#4800, 9650) Plant installation: Yes, feature number 4581 Field installation: Yes, feature number 4581 Direct Mail (MS1, MD1, MD2) (#4941) This feature provides hardware and printer adjustments to support a heavy paper commonly used in the direct mail industry for unenveloped mailing pieces. The paper is typically referred to as nine point coated stock. The paper is nine thousandths of an inch thick and coated with a matte or glossy finish. Thinner coated stocks may also be used, such as eight point or seven point. This feature provides hardware to improve the toner fusing on this type of paper. This support is not based on weight, or any single property of the paper. The smoothness, and content of the paper are all key to the solution. It does not provide universal support for any equivalent weight paper. Holes or labels and cards attached to the form may prevent its ability to feed properly. Printing on preprinted or varnished areas will have degraded fuse quality, depending on the screen density of the ink. This paper is supported in simplex or duplex mode on the InfoPrint 4100 Models MS1, MD1, and MD2. This feature (#4941) must be ordered for both the MD1 and MD2 in a duplex printing configuration. Duplex printing is supported in L, Inline, and H Configurations. The paper characteristics supported are: Basis weight: 61 pound Bond, 152 pound Text or Offset, 225 gsm, 9.5 point maximum Finished weight (with ink and varnish): 63 pound Bond, 157 pound Text or Offset, 233 gsm, 9.5 point maximum Caliper: 0.0092 inches, 0.234 mm maximum Porosity: 80 seconds Gurley Smoothness: 2.5 Parker print surface rating Description: Coated freesheet (free of groundwood), matte or gloss finish InfoPrint is a registered trademark of Ricoh Co., Ltd. 5
Model MD2 - An additional PTFE Mat that prevents toner from sticking to the preheat platen is required with this feature. PTFE mats must be ordered as supply items. These are only for engine 2 (MD2) in a duplex configuration. This mat supplies are not required for simplex or dual simplex printing. It is the customer's responsibility to provide any additional pre- and post-processing equipment needed to handle the print forms. This may include urge units, walkovers, and other paper path modifications. An urge unit is required when printing in duplex with heavyweight forms when using Direct Mail Print feature. It is also the customer's responsibility to order the additional PTFE Mats. The same supply items used on the InfoPrint 4100 Models HD4 and HD6 are used on the Model MD2. Prerequisites: InfoPrint 4100 Model MS1, MD1, or MD2 Corequisites: None Limitations: An urge unit is required when printing in duplex with heavyweight forms when using this Direct Mail Print Feature. Pinless mode is not supported. Plant installation: Yes Field installation: Yes Direct Mail Supply Items Description InfoPrint 4100 Model MD2, HD4, HD6 PTFE Mat Part Number 44D8244 Yield for these supply items is highly variable and is dependent upon toner coverage, paper smoothness, and operating conditions of the printer. Actual usage must be used to establish the supply's life in your applications. InfoPrint 4100 Models HD2, HD4, and HD6 PTFE Mat (44D8244) Unit: Part number represents one package Packaging: Four mats per package Minimum order quantity: One package (#9478) CCD with InfoPrint Version 7 Toner This initial order feature provides a Customer Changeable Developer (CCD) for an InfoPrint 4100 Model HS3, HD5, or HD6 that uses the InfoPrint Version 7 Printing Supplies materials. These materials provide a black toner. This feature must be ordered for a Model HS3, HD5, or HD6 when Enhancement Package #1 (feature number 9620), is ordered. Only one type of black toner can be installed on any printer. On an HS3, HD5, or HD6, combinations such as one CCD for Enhanced Printing Supplies Version 2 and another CCD for InfoPrint V7 cannot be installed on a printer. Each printer in a duplex configuration must use the same black toner. When MICR is installed in engine #1 (HD5), either InfoPrint Version 7 black toner or Enhanced Printing Supplies Version 2 black toner can be installed in engine #2 (HD6). InfoPrint is a registered trademark of Ricoh Co., Ltd. 6
Either a CCD with V2 Enhanced Printing Supplies (#9476) or a CCD with InfoPrint Version 7 Printing Supplies (#9478) must be specified on an initial order for an InfoPrint 4100 Model HS3, HD5, or HD6. Minimum number of this feature on Initial Order for Models HS3, HD5, and HD6: 0 Maximum number of this feature: 1 Prerequisites: InfoPrint 4100 Model HS3, HD5, or HD6 This feature can only be ordered with feature number 9620 (Enhancement package #1), and this feature must be ordered when feature number 9620 is ordered. Initial order: Yes, must be ordered when feature number 9620 is ordered. Field install: Use feature number 9558 to change an HS3, HD5, or HD6 to V7 toner. Feature number 9620 is not needed on the InfoPrint 4100 to order feature number 9558. Change CCD to InfoPrint Version 7 - MES only (#9558) This feature is used to change an installed EPS V2 CCD (#9476 or #4486) for an InfoPrint 4100 Model HS3, HD5, or HD6 to an InfoPrint Version 7 Printing Supplies CCD. Minimum number of this feature: 0 Maximum number of features: No maximum on number of CCDs. A Boulder Systems Assurance Review is required prior to ordering this feature. Shipment of this conversion kit will not occur unless the Systems Assurance Review has been successfully completed. For Systems Assurance reviews, contact Johnita McGraw at 303-924-6880 (Johnita K McGraw/US/InfoPrint/IDE@IBMUS). Prerequisites: InfoPrint 4100 Model HS3, HD5, or HD6 Field installable: Yes, feature number 9558 can be used to change a black CCD with V2 materials on an HS3, HD5, or HD6 to EPS V7. Initial order: No Cooling System: Inline Configuration (#9231) - Initial Cooling System: Inline Configuration (#4231) - Initial and MES The Web Cooling System stabilizes and cools the paper web between the printers to improve overall printer performance. All components feature air bearings, large diameter rollers, and adjustments to support a wide range of paper weights and widths. The Inline Configuration includes a Vacuum Unit for tension, a Cooling Tower for cooling, and an Air Bearing Flipper to flip the paper 180 degrees. The system is adjustable for different paper widths to keep the front reference edge of the paper in the correct position. The Cooling Tower is attached directly to the Flipper, which improves paper alignment in Inline Configuration. An optional Walk-Over (#4579 for in-line) can be added so that users can easily step over the paper web between the Flipper and Printer 2. Initial orders: One of either feature #4230, 4231, or 4232 is optional on initial orders for an MD1. One of feature #9230, 9231, or 9232 is required on all initial orders for Models HD3 or HD5. InfoPrint is a registered trademark of Ricoh Co., Ltd. 7
MES orders: Feature number 4230, 4231, or 4232 can be ordered for any MD1, HD3, or HD5 Minimum number of this feature: 0 Prerequisites: Feature number 9231: HD3, HD5 FN 4231: MD1, HD3, HD5 Field installable: Yes, feature number 4231 on HD3, HD5, MD1 Initial order: Yes, feature number 9231 for HD3, HD5; feature number 4231 for MD1 Cooling System: L-Configuration (#9230) - Initial order Cooling System: L-Configuration (#4230) - Initial order and MES The paper cooling system stabilizes and cools the paper web between the printers to improve overall printer performance. All components feature air bearings, large diameter rollers, and adjustments to support a wide range of paper weights and widths. The L-Configuration includes a Vacuum Unit for tension, a Cooling Tower for cooling, and a Turn Unit with Air Supply to turn the paper 90 degrees. The Turn Unit is adjustable to keep the front reference edge of the paper in the correct position with different width paper. It also features a hinged top cover that protects the paper and can be walked on. The L-Configuration version of the Cooling Tower has a standalone frame. An optional Walk-Over can be added so that users can easily step over the paper web between the Turn Unit and Printer 2. Initial orders: One of either feature number 4230, 4231, or 4232 is optional on initial orders for an MD1. One of feature number 9230, 9231, or 9232 is required on all initial orders for models HD3 or HD5. MES orders: Feature number 4230, 4231, or 4232 can be ordered for any MD1, HD3, or HD5 Minimum number of this feature: 0 Prerequisites: Feature number 9230: HD3, HD5 FN 4230: MD1, HD3, HD5 Field installable: Yes, feature number 4230 on MD1, HD3, HD5 Initial order: Yes, feature number 9230 on HD3, HD5; feature number 4230 on MD1 Cooling System: H-Configuration (#9232) - Initial on HD3, HD5 Cooling System: H-Configuration (#4232) - MES and Initial The Web Cooling System stabilizes and cools the paper web between the printers to improve overall printer performance. All components feature air bearings, large diameter rollers, and adjustments to support a wide range of paper weights and widths. The H-Configuration includes all of the components of the L-Configuration (Vacuum Unit, Cooling Tower, and Turn Unit with Air Supply), as well as a second Turn Unit with Air Supply. InfoPrint is a registered trademark of Ricoh Co., Ltd. 8
This complete solution provides all parts needed between the engines for an H Configuration installation. The Turn Unit with air supply is an air bearing system that turns the paper 90 degrees. The adjustable turn bar allows the user to easily select the correct paper width and keep the reference edge at the same location. Numerous paper path options allow the flexibility to turn the paper with or without flipping it. A hinged top cover protects the paper during printing and can be walked on. An optional Walk-Over can be added so that users can easily step over the paper web between the Turn Unit and Printer 2. Initial orders: One of either feature number 4230, 4231, or 4232 is optional on initial orders for an MD1. One of feature number 9230, 9231, or 9232 is required on all initial orders for Models HD3 or HD5. MES orders: Feature number 4230, 4231, or 4232 can be ordered for any MD1, HD3, or HD5 Minimum number of this feature: 0 Prerequisites: Feature number 9232: HD3, HD5 Feature number 4232: HD3, HD5, MD1 Field installable: Yes, feature number 4232 on MD1, HD3, HD5 Initial order: Yes, feature number 9232 on HD3, HD5; feature number 4232 on MD1 Paper Walk-Over - 500 mm (#4579) The Walk-Over unit guides and protects the paper, keeps it off the floor, and reduces paper drag. It features a hinged top cover that allows the user to easily walk over the paper web. It can be connected to other Walk-Overs and to the Turn Unit. The 500 mm wide version fits within the recommended floor space between the Air Bearing Flipper and Printer 2 in an Inline Configuration. Minimum number of this feature: 0 0 Prerequisites: InfoPrint 4100 Model MS1, MD1, MD2, HS2, HD3, HD4, HS3, HD5, or HD6 Customer setup: Yes Field installable: Yes, feature number 4231 Initial order: Yes, feature number 9231 Paper Walk-Over - 750 mm (#4580) The Walk-Over unit guides and protects the paper, keeps it off the floor, and reduces the drag. It features a hinged top cover that allows the user to easily walk over the paper web. It can be connected to other Walk-Overs and to the Turn Unit. InfoPrint is a registered trademark of Ricoh Co., Ltd. 9
The 750 mm version fits between the Turn Unit and Printer 2 in L-Configuration within the recommended floor space. Two 750 mm Walk-Overs are included in the H-Configuration Cooling System. Minimum number of this feature: 0 0 Prerequisites: InfoPrint 4100 Model MS1, MD1, MD2, HS2, HD3, HD4, HS3, HD5, or HD6 Customer setup: Yes Field installable: Yes, feature number 4231 Initial order: Yes, feature number 9231 Remote Terminal Support The Remote Terminal Support function allows the InfoPrint 4100 Operator Console to access InfoPrint Process Director (IPPD) or other systems that use 3270 or 5250 type terminals. This function is included in Version 15.6, or later, microcode. Enhanced Cutsheet Emulation When two pages are printed side-by-side, this enhancement improves the ability to cut between the pages by: Moving both pages to increase the distance between pages. The right-hand page is moved to the right, and the left-hand page to the left. Moving the right-hand page to the right while not moving the left-hand page. This function is included in Version 15.6, or later, microcode. Productivity Tracking feature (#5565) The InfoPrint 4100 now supports Version 2 of the InfoPrint Productivity Suite Program Product (5639-AA9). This feature provides the necessary microcode to allow the InfoPrint 4100 printers with the InfoPrint POWER Controller to send production data to a Windows Server attached via an Ethernet LAN to the printer control unit. This function is included in the microcode version 15.6, and above. Statement of general direction InfoPrint Solutions Company intends to extend the new InfoPrint Version 7 toner to selected 4100 models in the near future. Field-installed printers may require an upgrade to accept the new toner. While this represents InfoPrint Solutions Company's current plans, InfoPrint Solutions Company reserves the right to change or modify this plan at any time. All statements regarding InfoPrint Solutions Company's plans, directions, and intent are subject to change or withdrawal without notice. Any reliance on these statements of general direction is at the relying party's sole risk and will not create liability or obligation for InfoPrint Solutions Company. InfoPrint is a registered trademark of Ricoh Co., Ltd. 10
Product number The following features are for machine type 4100. Initial MES Feature Feature Description Number Number Models Universal Forms Ctl Sensor 4571 4571 MS1, MD1, MD2 HS2, HD3, HD4 Enhancement Package #1 9620 N/A MS1, MD1, MD2 HS2, HD3, HD4 Toner Collector Bag Switch N/A 4573 MS1, MD1, MD2 HS2, HD3, HD4 Lower Tractor Jam Detection Sensor N/A 4572 MS1, MD1, MD2 HS2, HD3, HD4 CCD w/ InfoPrint V7 Toner 9478 N/A Change CCD to InfoPrint V7 N/A 9558 Add'L CCD w InfoPrint V7 4488 4488 Dual Tractorless Vacuum Drive 4575 4576 HS2, HD3, HD4 Direct Mail 4941 4578 MS1, MD1, MD2 Cooling System - "L" 9230 4230 HD3, HD5 Cooling System - "Inline" 9231 4231 HD3, HD5 Cooling System - "H" 9232 4232 HD3, HD5 Cooling System - "L" 4230 4230 MD1 Cooling System - "Inline" 4231 4231 MD1 Cooling System - "H" 4232 4232 MD1 Paper Walkover - 500 mm (Inline) 4579 4579 MS1, MD1, MD2 HS2, HD3, HD4 HS1, HD1, HD2 PS1, PD1, PD2 Paper Walkover - 750 mm ("L") 4580 4580 MS1, MD1, MD2 HS2, HD3, HD4 HS1, HD1, HD2 PS1, PD1, PD2 Tractored and Tractorless Forms Id 4581 4581 MS1, MD1, MD2 HS2, HD3, HD4 Model conversions: No model conversions are available. Business Partner information If you are a Direct Reseller - System Reseller acquiring products from InfoPrint Solutions Company, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). https://www.ibm.com/partnerworld/mem/sla.jsp?num=109-057 InfoPrint is a registered trademark of Ricoh Co., Ltd. 11
Technical information Specified operating environment Software requirements InfoPrint Manager The following PTFs are required to support the features in this Announcement: InfoPrint Manager for AIX V4.2 requires PTF U823037 InfoPrint Manager for AIX V4.3 requires PTF UO00879 InfoPrint Manager for Windows V2.2 requires PTF UO00865 InfoPrint Manager for Windows V2.3 requires PTF UO00880 Planning information Supplies InfoPrint Solutions Company Supplies are distributed by Priority Fulfillment Services and a worldwide network of resellers. End users can contact Priority Fulfillment Services (PFS) at (888-426-7746) for the name of a reseller or dealer in their area where printing supplies can be purchased. Resellers can mail orders for printing supplies to PFS at the following address: Priority Fulfillment Services 500 North Central Expressway Plano, TX 75074 Telephone: (888-426-7746) Fax: 972-881-9201 Choosing the right supplies is very important. For optimum print quality and reliable performance, the use of InfoPrint Solutions Company supplies is recommended. Supplies are purchase-only items. The customer is responsible for ordering and maintaining an adequate stock of supplies. Many authorized supplies dealers offer supply agreements, which often offer customers price discounts, price protection, established shipping schedules, and reduced administrative expenses. It is recommended that customers maintain a one- to two-month stock of supplies on hand. Materials Safety Data Sheets (MSDS, OSHA Form 20) are available in the U.S. by calling 800-426-4333. You will need to provide the seven-digit part number or the machine type and model number and supply type. Outside the U.S., contact your local supplies dealer. Regular supply items: InfoPrint Version 7 Toner (part number 56Y2700) Unit: Part number represents one carton Packaging: Four cassettes per carton InfoPrint Version 7 Developer (part number 56Y2701) Unit: Part number represents one carton. Packaging: Two bottles per carton Security, auditability, and control These products use the security and auditability features of the host hardware, software, or application software. InfoPrint is a registered trademark of Ricoh Co., Ltd. 12
The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Terms and conditions Field installable feature Yes Warranty period These features assume the same warranty or maintenance terms as the machine in which it is installed for the full warranty period. The terms and conditions for these features are the same as for the base InfoPrint 4100 (machine type 4100). Prices For information on pricing, please contact your InfoPrint Solutions Sales Representative or your InfoPrint Solutions Business Partner. Description Feature Number Universal Forms Ctl Sensor 4571 Enhancement Package #1 9620 CCD w/ InfoPrint V7 Toner 9478 Add'L CCD w/ InfoPrint V7 Toner 4488 Dual Tractorless Vacuum Drive 4575 Direct Mail 4941 Cooling System - "L" 9230 Cooling System - "Inline" 9231 Cooling System - "H" 9232 Cooling System - "L" 4230 Cooling System - "Inline" 4231 Cooling System - "H" 4232 Paper Walkover - 500 mm (Inline) 4579 Paper Walkover - 750 mm ("L") 4580 Tractored and Tractorless Formd Id 4581 Toner Collector Bag Switch 4573 Lower Tractor Jam Detection Sensor 4572 Change #9476 (V2) to #9478 (V7 9558 Dual Tractorless Vacuum Drive 4576 Direct Mail 4578 ServiceElect Maintenance charges For ServiceElect Maintenance Service Charges, contact InfoPrint Solutions Company Global Services at 888-4343 (426-4343). Trademarks InfoPrint and Ricoh are registered trademarks of Ricoh Co., Ltd. in the United States, other countries, or both. Ricoh is a registered trademark of Ricoh Co., Ltd. and its affiliated companies. POWER is a trademark of IBM Corporation in the United States, other countries, or both. InfoPrint is a registered trademark of Ricoh Co., Ltd. 13
PartnerWorld, IBM and AIX are registered trademarks of IBM Corporation in the United States, other countries, or both. Windows is a registered trademark of Microsoft Corporation in the United States, other countries, or both. Other company, product, and service names may be trademarks or service marks of others. Terms of use InfoPrint Solutions Company LLC ("InfoPrint") products and services which are announced and available in your country can be ordered under the applicable standard agreements, terms, conditions, and prices in effect at the time. InfoPrint Solutions Company LLC ("InfoPrint") reserves the right to modify or withdraw this announcement at any time without notice. This announcement is provided for your information only. InfoPrint is a registered trademark of Ricoh Co., Ltd. 14