Multi-axis controller V 8 / VV 8

Multi-axis controller V 8 / VV 8 /30 03 The multi-axis controller V 8 is a rugged switching device according IEC/EN 947-5- for electro-hydraulic applications.the modular design enables the switching device to be used universally. The V 8 is resistant to oil, maritime climate, ozone and UV radiation. Contact complement 0,5 A 0 V AC 5 or,5 A 4 V DC 3 I min > 0, ma V DC Gold plated for max. load of 0, Watt (standard) V8LB3DSRPA-ZP+ZP- Pos. V 8 V 8 Mechanical life V 8 0 million (operating cycles) Mechanical life VV 8 0 million (operating cycles) Permissible ambient temperature Operation -40 C to + C Climate resistance Storage -50 C to +80 C Damp heat constant IEC 068--78 Damp heat cyclic IEC 068--30 Degree of protection front IP 54 IEC/EN 59 Technical data see catalog 4/00 Description data see catalog 4/00 Spindle block with schematic representation of the master controller installation and deflection directions. Version shown for left-hand side installation (right-hand side installation is mirror image). 3 3 4 4 5 7. Multi-axis controller left (dir. -, 3-4) 7. Multi-axis controller right (dir. 5-6, 7-8) 0 Gate cross-shaped (prohibits diagonal shifting) Gate special-shaped (e.g. H-gate) 0 Control-handle with knob solid Control-handle with latch for mechanical zero interlock. by lifting. by lifting, interlocking the gate.3 by lifting, interlocking in the joint bracket (only VV 8).4 by pushing down.5 Mechanical zero interlock with command devices see catalog /74 Control-handle with dead man s button NO 3 Control-handle with signal button NO 4 Control-handle with push button NO 5 Control-handle with flat push button NO 6 Control-handle with palm grip B 7 Control-handle with palm grip B with push button top NO 8 Control-handle long or short 8. -0 mm 8.3 +0 mm 9 More knobs, grips and T-grips with and without signal devices see catalog /70ff 30 Masterswitch (contact) switching sequence -0-3 3 Direction - and 3-4 each masterswitch 33 Switching program according contact-arrangement MS... see catalog 4/00 34 or to your contact-arrangement 36 Switching sequence 3-0-3 38 Spring return in 0-position (for each direction) 39 Friction brake adjustable, only with V8 (for each direction) Potentiometer e.t.c. each direction with mounted 40 Conductive-plastic potentiometer T 30, with centre tap linear 0,5 Watt wiper current max. ma resistance x k P8, x k P83, x 5k P84, x 0k P85 4 Prepared for mounting potentiometer shaft 6 mm adjusting-angle x 0 4 Prepared for mounting potentiometer e.t.c. adjusting-angle variable. 43 more Potentiometer e.t.c. see catalog /40ff 50 Cover housing 5 Filter plug M 0 for air-condition 5 Cable entry M 0 with anti-kink protection and strain relief 53 Plug in socket 4-pole female insert CPC 7 wired 54 Connector 4-pole male insert CPC 7 unwired 55 Wiring plug in socket or connector each wired-connection Indicating labels not engraved with or 4 arrows 6 Engraving, each 0 characters expansion A......P8 P 3 4 7 8 left right 6 Deflection directions designated to DIN 5 No. of contacts 3 Weight gramm 800 800 900 900 50 50 00 00 0 0 40 0 40 30 30 70 300 0 30 V 8 VV 8 V 8 VV 8 L R P PX M MP MP MN T H D DV B B T S5 S8 3 Z R P (P) (P) B 5 Price 8

Multi-axis controller V 8 / VV 8 /3 03 multi-axis controller installation side L o. R special control handle gate handle contact dir. - (5-6) spring return dir. - (5-6) Potentiometer dir. - (5-6) contact dir. 3-4 (7-8) V8 L S5 P B3K - 3 Z P + R P -B- -X- A050 P84 +A98 P8 Potentiometer description dir. 3-4 (7-8) see /40ff Arrangement dir. 3-4 (7-8) see 4/00 Potentiometer description dir. - (5-6) see /40ff Arrangement dir. - (5-6) see 4/00 special please describe housing Potentiometer dir. 3-4 (7-8) friction brake dir. 3-4 (7-8) 9

Industrieschaltgeräte Matching Electronic V8 / VV8 /3a 03 Pos. Gewicht Gramm Form Preis 0 Voltage output +0,5,5 4,5 Volt ANALOG Technical Data: Supply voltage 8-30 VDC* 3 Output characteristic linear mounting depth A (33 mm) 0 Voltage output +0 5 0 Volt ANALOG Technical Data: Supply voltage 8-30 VDC* 3 Output characteristic linear mounting depth A (33 mm) electronic for axis electronic for 4 axis electronic for axis EP/5 EP/84 E0 E0 E03 E04 E03 E03 E033 30 Voltage output +0 0 0 Volt ANALOG 3 Technical Data: 3 Supply voltage 8-30 VDC* 33 Output characteristic linear mounting depth A (33 mm) electronic for axis EP/84 E04 E04 E043 40 Voltage output ± 0Volt ANALOG 4 Technical Data: 4 Supply voltage 8-30 VDC* 43 Output characteristic linear mounting depth A (33 mm) electronic for axis EP/84 E05 E05 E053 output power +0 0 0 ma ANALOG 6 Technical Data: 6 Supply voltage 8-30 VDC* 63 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/6 E E E3 70 output power +0 0 +0 ma ANALOG 7 Technical Data: 7 Supply voltage 8-30 VDC* 73 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/6 E E E3 80 output power +0 4 +0 ma ANALOG 8 Technical Data: 8 Supply voltage 8-30 VDC* 83 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/6 E3 E3 E33 90 output power +4 + +0 ma ANALOG 9 Technical Data: 9 Supply voltage 8-30 VDC* 93 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/9 E4 E4 E43 00 output power ±0 ma ANALOG 0 Technical Data: 0 Supply voltage 8-30 VDC* 03 Output characteristic linear mounting depth A (33 mm) electronic for axis ER/44 E5 E5 E53 0 Potentiometer output for proportional valve PVG3ANALOG (0,75 0,5 0,75 Us) Technical Data: 3 Output characteristic linear mounting depth A (33 mm) for axis for axis for 3 axis for 4 axis E06 E06 E063 E064 0 Humidity protection (circuit board moulded) for use with high condensation *Other voltages on request 0

Matching Electronic with Profi-Bus Interface for potentiometer applications /3b 03 Pos. Weight gramm Price Profi-Bus DP interface (DIN 9 45 part 3) EB/85 EPB0 Technical data: Supply voltage 8-3 V DC distinctively poled Profi-Bus Baud rate max. MBit/s Address outside adjustable 0...99 by rotary switch (default 99) potentiometer output value 0 / 8 / 55 or 55 / 0 / 55 Input 4 analog ports (4-axis) 6 digital ports for 4 x direction-contacts and for switches in the palm grip 6 digital externally ports for 6 switches Output 8 LED-outputs Connection Profi-Bus D-SUB 9 socket (female insert) + Connector -pole CAN-Bus interface (Protocol CAN open CiA DS 30, SAE J 939*) EB/0 ECB0 Technical data: Supply voltage 9-36 V DC distinctively poled CAN-Bus level: physical layer acc. ISO 898 Baud rate 5 kbit/s...mbit/s Bus-exclusion DIP switch hook up Identifier / CAN-open-ID adjustable by DIP switch Input 9 analog ports 6 digital ports for grip functions 3 digital externally ports for switches Output 8 digital externally ports for LED drive Connection D-SUB 9 socket protection IP 65 (male) CAN in + Connection D-SUB 9 socket protection IP 65 (female) CAN out *Protocol CAN open customer-specific after request

Electronic (Amplifier) ES/6 current controlled 0 Ampere /3c 03 Pos. for mounting on V 8 with potentiometer Weight gramm Price Elektronic (Amplifier) Technical data: Power supply 8 3 V DC Current controlled PWM 0 A per axis can be a characteristic curve deposited 50 EV0 Dither frequency or 00 Hz adjustable Ramp time adjustable or Current input 4 0 ma Current output A RS 3 interface with PC work parameter attitude and diagnosis Error journal for 4 errors with operating time active/inactively recognition Connector DT04-P / DT06-S 90 Humidity protection (circuit board moulded) for use with high condensation

Electronic (Amplifier) ES/6 Connections drawing /3d 03 ES/6-0 violet grey/pink black directions power supply: +8V +3V PWM-output: max A Frequency: /00 Hz ±0 Hz X: pol. DEUTSCH Connector type: DT04-P X: pol. DEUTSCH Connector type: DT06-S output lmax=a Ripper power supply white grey white grey green yellow brown red blue black violet green yellow brown red blue pink 3