SafeDispatch SDR Gateway fr MOTOROLA TETRA SafeMbile ffers a wrld f wireless applicatins that help rganizatins better manage their mbile assets, fleet and persnnel. Fr mre infrmatin, see www.safembile.cm.
Cntents 1 Abbreviatins List... 2 2 System descriptin... 3 2.1 General... 3 2.2 System cmpnents... 3 2.3 Cmputer Netwrk Cards and rutes... 4 3 System cnfiguratin... 5 3.1 Gateway registratin... 5 3.2 SDR gateway cnfiguratin... 6 3.3 Finding / cnfiguring the ISSI and Passwrd f the SDR... 8 3.4 TETRA subscriber cnfiguratin... 11 4 System features... 14 4.1 ARS... 14 4.2 GPS... 14 4.3 SMS... 14 Cpyright SafeMbile 2017. All rights reserved 1
1 Abbreviatins List SDR: Shrt Data Ruter TETRA: Terrestrial Trunked Radi UDP: User Datagram Prtcl TCP: Transmissin Cntrl Prtcl IP: Internet Prtcl ISSI: Individual Shrt Subscriber Identity GPS: Glbal Psitining System LIP: Lcatin Infrmatin Prtcl SMS: Shrt Message Service Cpyright SafeMbile 2017. All rights reserved 2
2 System descriptin 2.1 General SafeDispatch is the essential data applicatin fr dispatchers and radi peratrs wanting t take cntrl f their mbile assets. With the flexibility, cntrl and perfrmance f SafeDispatch, the users nw have the mst cst effective, prfessinal TETRA slutin right at their fingertips. With imprtant features t accmmdate nearly any fleet management challenge, SafeDispatch interfaces with TETRA prfessinal radi systems seamlessly while prviding the tls needed t mst effectively mnitr the emplyees, vehicles and materials, equipped with TETRA radis having GPS functinality. SafeMbile has tailred features f the SafeDispatch infrmatin platfrm t enhance cmmunicatin capabilities, data analysis and dcumentatin, enabling t cntrl the custmer s fleet in a user friendly, functinal design. All elements are easy t use and accessible via any Internet cnnected cmputer in the wrld. 2.2 System cmpnents The system is cmpsed f tw distinct parts. One is the SafeDispatch system that has the SafeMbile applicatins that are needed (Dispatcher, Gateway, Applicatin Server, Updater and Subscriber and User Manager). All f these applicatins cmmunicate thrugh a messagebus (UDP Multicast). Multicast surce address is 224.30.0.1.4 The secnd system is the TETRA system. This system must cntain a Shrt Data Ruter (SDR) alng with the subscriber radis and repeaters. The SafeDispatch system uses a SDR Gateway Applicatin t cnnect t the TETRA system (SDR). The SDR Gateway Applicatin pens as a LAN (TCP/IP n prt 6006) cnnectin. After the cnnectin is established, a registratin message is sent t the SDR. This message cntains the ISSI and the passwrd that is set t allw the TETRA system t be used by the SDR gateway. NOTE: This infrmatin must be the same in bth systems. In the next sectin it will be describe hw t setup the SDR Gateway Applicatin using the ISSI and the passwrd that is setup in the TETRA system. After the registratin is cmpleted with success, the TETRA subscriber will begin t send data t the SDR Gateway Applicatin. The Gateway will decde the data and send it t Dispatcher/Applicatin server. Cpyright SafeMbile 2017. All rights reserved 3
2.3 Cmputer Netwrk Cards and rutes Desired cnnectivity t the SDR is thrugh a brder ruter, where the IP address is accessible t SafeDispatch Server PC in the lcal netwrk. SafeDispatch can use tw netwrk cards n the server PC, ne fr lcal netwrk cnnectivity and ne fr direct cnnectin t SDR. All lcal netwrk cmputers must have static IP (example 172.168.255.10) SDR dedicated netwrk card must have static IP (example 192.168.100.2) in different netwrk class the lcal netwrk SDR dedicated netwrk card must have persistent rute definitin Adding static rute frm CMD: rute p add 10.128.255.150 mask 255.255.255.255 192.168.100.1 metric 70 if 11 10.128.255.150 is SDR IP Where: 192.168.100.1 Gateway IP f SDR dedicated netwrk card (in server pc) If 11 is SDR dedicated netwrk card interface number Cpyright SafeMbile 2017. All rights reserved 4
3 System cnfiguratin 3.1 Gateway registratin Open Administrative Mdule G t Gateways tab Add new Gateway sectin Enter the IP Address f the Cmputer running the Gateway Applicatin Sftware Check the Active checkbx The Available text bx shuld display hw many licenses yu have available Click Add Add new Radi Gateway sectin Enter the SDR IP Address f the TETRA SDR System Enter the Gateway ISSI, this is the ID that is cnfigured in the TETRA SDR system fr the third party applicatin t use Enter the Gateway Name if yu run nly ne Gateway, enter Tetra SDR if yu run mre then ne Gateway, there a unique name Click Add Click Save Settings Figure 1 - Administrative Mdule - Gateway Registratin Cpyright SafeMbile 2017. All rights reserved 5
3.2 SDR gateway cnfiguratin Ensure AppServer applicatin is running n the Server PC Open SDR Gateway frm the Desktp shrtcut (default installatin lcatin is C:\Prgram Files (x86)\safembile\tetra_sdr\ SDRgateway.exe) Figure 2 - SDR Gateway - Status tab Status windw will display cnnectin status, recnnect messages and pll requests In the event the SDR is radi-silent (n radis sending data), the gateway will refresh its cnnectin with the SDR every 10 minutes Select SDR Settings tab Figure 3 - SDR Gateway - Settings tab Cpyright SafeMbile 2017. All rights reserved 6
Enter the SDR Passwrd, the passwrd that is set in the TETRA SDR System fr third party applicatins The passwrd must be in an IP Address frmat (default is 0.0.0.0) Obtain the passwrd via Telnet cnfiguratin f the SDR (including fr Tetra Express systems) SDR IP is read frm the Database, previusly cnfigured in Administrative Mdule Gateways registratin Enter the SDR Prt, this is a TCP Prt and must be expsed in rder t cmmunicate ensure n firewall r brder ruter is blcking this prt number yu shuld be able t test the cmmunicatin using Telnet if required Psitin errr tlerance is a parameter send by Mtrla TETRA subscriber radis, based n this value, GPS psitins will be cnsidered valid, r nt, and inserted in the database Aut cnnect checkbx must be checked t ensure the applicatin will cnnect when pened Message Bus tab expses the Multicast IP and Prt Number used fr Inter Prcess Cmmunicatin, yu shuld nt be required t change this values Figure 4 - SDR Gateway - Message Bus tab Clicking Save buttn will prmpt yu t restart the gateway applicatin in rder fr the changes t take place Figure 5 - SDR Gateway - Save prmpt Cpyright SafeMbile 2017. All rights reserved 7
3.3 Finding / cnfiguring the ISSI and Passwrd f the SDR The SDR must be cnfigured t allw a third party applicatin t cnnect t it. An ISSI and Passwrd shuld be assigned fr the SDR Gateway t be able t cnnect. 1. Cnnect t SDR by either using the lcal terminal cnnected t switch r Service PC cnnected t switch's "Lcl Srvc" prt and using Telnet 2. Type cnfig and press enter 3. Prvide any user name Figure 6 - SDR CLI Figure 7 - SDR CLI - Enter User Name Cpyright SafeMbile 2017. All rights reserved 8
4. Select SDTS Hst 5. Select View/Mdify SDTS Hst Figure 8 - SDR CLI - Cnfiguratin Figure 9 - SDR CLI - SDTS Hst 6. Yu can see the Hst Name and crrespnding ISSI number Cpyright SafeMbile 2017. All rights reserved 9
Figure 10 - SDR CLI - Select Hst 7. Set the Hst Name, Hst Passwrd, ISSI and TCP Prt Figure 11 - SDR CLI - View Hst NOTE: Tetra Express systems have a web interface that allw yu t set the passwrd fr a Shrt Data Hst. The passwrd set in this web interface is nt usable with SafeDispatch SDR Gateway! Please read the passwrd frm the Cmmand Line Interface using Telnet. Cpyright SafeMbile 2017. All rights reserved 10
Figure 12 - Tetra Express Web Interface 3.4 TETRA subscriber cnfiguratin TETRA subscriber must be cnfigured t send GPS messages t ISSI that is allcated fr SDR Gateway. GPS Lcatin Prtcl must be set t LIP lcatin infrmatin prtcl. Figure 13 - Tetra CPS - GPS Settings - LIP Prtcl Cpyright SafeMbile 2017. All rights reserved 11
Lcatin update time and all the ther features are arranged while the radi is being prgrammed. T prgram this details: 1. Cnnect the radi t PC 2. Open Tetra CPS radi prgramming sftware 3. Read the radi 4. On the left side f the windw, under Prfile select GPS and click n "+" t pen the list 5. Frm the list, chse LIP Triggers Figure 14 - Tetra CPS - LIP Triggers - Peridic 6. Accrding t yur needs, select the features and change the default values Cpyright SafeMbile 2017. All rights reserved 12
Figure 15 - Tetra CPS - LIP Triggers NOTE: TETRA radis have their GPS refresh interval set in their cdeplug under LIP Triggers s the refresh interval value in SafeDispatch Subscriber and User management (Administrative Mdule) is nly used t sync the sftware with the expected value, nt t set the value in the radis. Cpyright SafeMbile 2017. All rights reserved 13
4 System features Features that are currently supprted: 4.1 ARS SafeDispatch dispatcher applicatin will receive an message frm the TETRA subscriber every time the unit is ON/OFF. This requires LIP Trigger Pwer Up and Pwer Dwn 4.2 GPS TETRA subscriber will send a GPS message fallwing the rules that are cnfigured in the cdeplug. This requires LIP Trigger Peridic and Mved 4.3 SMS Shrt messages are sent in bth directins. Cpyright SafeMbile 2017. All rights reserved 14
Figure 1 - Administrative Mdule - Gateway Registratin... 5 Figure 2 - SDR Gateway - Status tab... 6 Figure 3 - SDR Gateway - Settings tab... 6 Figure 4 - SDR Gateway - Message Bus tab... 7 Figure 5 - SDR Gateway - Save prmpt... 7 Figure 6 - SDR CLI... 8 Figure 7 - SDR CLI - Enter User Name... 8 Figure 8 - SDR CLI - Cnfiguratin... 9 Figure 9 - SDR CLI - SDTS Hst... 9 Figure 10 - SDR CLI - Select Hst... 10 Figure 11 - SDR CLI - View Hst... 10 Figure 12 - Tetra Express Web Interface... 11 Figure 13 - Tetra CPS - GPS Settings - LIP Prtcl... 11 Figure 14 - Tetra CPS - LIP Triggers - Peridic... 12 Figure 15 - Tetra CPS - LIP Triggers... 13 Cpyright SafeMbile 2017. All rights reserved 15