Crimp.mm (.") pitch EL CONNECTOR Disconnectable Crimp style Wire-to-wire connectors The contacts for the compact EL connector can be easily inserted into the connector housings. The plug housing and the receptacle housing can be smoothly mated even if they are mechanically distorted. 0 Features Easy insertion and secure installation of contacts Each contact has a pair of locking lances so that the contact can be installed and symmetrically locked in the housing. A lance retraction prevention mechanism is also provided so that the contact will be securely held in the housing. The lances have sufficient clearance to allow the contacts to be easily inserted into the housing. A smooth connection even when pried during mating The contact is held by the housing along a wide surface area. This reduces the deflection of the contact and ensures a smooth, safe connection even when pried during mating. Durable arm lock mechanism The arm lock mechanism of the housing is slit to prevent stress concentration during connection. Thus, it is highly durable and will survive repeated matings. Two contact styles Two different kinds of crimp contacts are available for convenient branching or internal jumpering. Specifications Current : 0A AC, DC max. Voltage : 00V AC, DC max. Temperature range: - C to +0 C (including temperature rise in applying electrical current) Contact resistance: Initial value/m Ω max. After environmental testing/0m Ω max. Insulation resistance:,000m Ω min. Withstanding voltage:,v AC/minute Applicable wire: AWG # to # 0. to.mm Applicable panel thickness: 0. to.0mm(.0" to.0") * Contact JST for details. Note: The current varies depending on the number of circuits and the wire size used in each connector. The table below lists the current as a function of the number of circuits and the wire size. Current unit: A Wire size (AWG) # # #0 # # # 0 0 0 Standards 0Recognized E0 Certified LR0 R0 Approved according to DIN/VDE 0<Reg. No. > Current : AC 0V, DC 00V Voltage : A, A, A, A Insulation group: B Kind of protection: IP 00 Applicable wires: AWG - Creepage current stability: KB 0
Contact Pin contact Socket contact. (.0) dia..(.)..0 (.0) (.0).(.).(.).(.0).(.).0. (.0) (.0) Pin contact Model No. Socket contact Applicable wire mm AWG # Insulation O.D. mm(in.) reel SLM-0T-P.E SLF-0T-P.E 0. to 0. to 0. to. (.0 to.0),000 SLM-T-P.E *SLM-T-P.E SLF-T-P.E *SLF-T-P.E 0. to. 0.+0. to 0.+0. 0 to + to 0+0. to. (.0 to.).+. to.0+.0 (.0+.0 to.0 +.0),000 Material and Finish Phosphor bronze, tin-plated Note:. Contact denoted by * is used for two wires. Note:. Contact JST for special products. Housing Material: Nylon, ULV-0, white Voltage Current Receptacle housing(for pin contact) Plug housing(for socket contact) ELR-0V ELP-0V 0.(.0).(.). (.0) 00V 0.0A ELR-0VF.(.).(.).(.) 0. (.0) 0.(.0).(.). (.) ELR-0V ELP-0V 00V 0.0A.(.).(.).(.). (.0).(.).(.).(.)
Housing Voltage Material: Nylon, ULV-0, white Current Receptacle housing(for pin contact) Plug housing(for socket contact) ELR-0V ELP-0V.(.0).(.0).(.). (.0).(.).(.).(.) ELR-0NV ELP-0NV 00V 0.0A 0.(.0).(.) 0. (.0) ELR-0NVF 0.(.0).(.).(.) 0. (.0) 0.(.0).(.) 0. (.0) ELR-0V ELP-0V 00V.0A.(.).(.).(.). (.0) 0.(.0).(.).(.)
Housing Voltage Material: Nylon, ULV-0, white Current Receptacle housing(for pin contact) Plug housing(for socket contact) ELR-0V ELP-0V 00V.0A.(.).(.).(.).(.).(.).(.).(.) ELR-V ELP-V 00V.0A.(.0).(.0).(.).(.).(.).(.).(.) ELR-V ELP-V 00V.0A.(.).(.).(.).(.).(.).(.).(.) Note:. ELR-0VF and ELR-0NVF are exclusively for free hanging. The other circuits can be used either for panel mounted or free hanging. The panel hole dimensions are given on the next page.. Contact JST for special products.
EL CONNECTOR Contact position location numbers contact position numbers are stamped Receptacle housing Plug housing Receptacle housing Plug housing 0 0 0 0 0 0 0 0
Panel layout D B C A Receptacle housing Model No. ELR-0V ELR-0V ELR-0V ELR-0NV ELR-0V ELR-0V ELR-V ELR-V Panel hole dimensions mm(in.) General tolerance ± 0. ( ±.00) A B C D.0(.).(.).(.).(.).(.).(.).(.).(.0).0(.).0(.).0(.) 0.(.) 0.(.0).(.).(.).(.) Note:. Punch holes in the panel according to the sketch and table shown above. Burrs must be removed.. The strength of the panel must be considered when punching two or more holes.. The connector must be inserted from the same side as the hole is punched..(.0).(.0).(.0).(.).(.).(.).(.).(.).(.0).(.0).(.0).(.0).(.0).(.0).(.0).(.0) Applicable panel thickness mm(in.) 0. to.0 (.0 to.0) Assembly layout.(.) to (Single-line arrangement) (Double-line arrangement) to Dimensions A mm(in.) 0.(.0).(.).(.).(.) A Applicator for the semi-automatic press AP-KN Contact Crimp applicator MKS-L Compact Crimp applicator MKS-LS Strip-crimp applicator MKS-SC with safety cover without safety cover with safety cover without safety cover with safety cover SLF-0T-P.E APLMK SLF/M0-E APLNC SLF/M0-E APLSC SLF/M0-E SLM-0T-P.E APLMK SLF/M0-E APLNC SLF/M0-E APLSC SLF/M0-E SLF-T-P.E APLMK SLF/M-E APLNC SLF/M-E APLSC SLF/M-E SLM-T-P.E APLMK SLF/M-E APLNC SLF/M-E APLSC SLF/M-E SLF-T-P.E APLMK SLF/M-E APLNC SLF/M-E SLM-T-P.E APLMK SLF/M-E APLNC SLF/M-E