2mm Pitch Miniature Connector
|
|
- Toby Michael Shelton
- 5 years ago
- Views:
Transcription
1 mm Pitch Miniature Connector A A Series Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted in the high density. The crimping case is structured in the mm pitch grid, so that connectors can be arranged for use.. Variation in Number of Contacts In addition to the dip type, SMT and crimping types are available with broad variations.. Stacking Variation Product Specifications When the connector is used for board to board, set mm between boards in conjunction with the pin header AB, or 5.1mm between boards in conjunction with the pin header AC. Rating Current rating 1A Voltage rating 00V AC Operating Temperature Range Operating Moisture Range 55 to +5ç (Note 1) 0 to 0% Storage Temperature Range Storage Humidity Range to +0ç (Note ) 0 to 70% (Note ) Item Specification Condition 1. Insulation Resistance. Withstanding voltage. Contact Resistance. Vibration 5. Humidity (Steady state) 00M ohms min. No flashover or insulation breakdown. 15m ohms max No electrical discontinuity of µs or more Insulation resistance: 00M ohms min. 500V DC 50V AC/1 minute 0.1A Frequency: to 55 Hz, single amplitude of 0.75 mm, hours in each of the directions. 9 hours at temperature of 0ç and humidity of 90% to 95%. Humidity resistance ( 5ç: 0 minutes 15 to 5ç: 5 minutes max. No damage, cracks, or parts looseness. (Steady state) (15ç: 0 minutes 15 to 5ç: 5 minutes max.) 5 cycles 7. Operating Life Contact resistance: 0m ohms max. 0 cycles. Resistance to Flow: 0ç for seconds No deformation of components affecting performance. Soldering heat Manual soldering: 00ç for seconds Note 1: Includes temperature rise caused by current flow. Note : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Applications VTR, vehicle telephones, and other various kinds of electronic equipment Material Insulator Contact Part Pin header (Through hole) Receptacle (Through hole) Pin header (SMT) Receptacle (SMT) Crimping socket Pin header Receptacle Crimping contact Material Finish Remarks Polyamid PBT PPS PBT Brass Black Light brown Black UL9V-0 Phosphor bronze Selective gold plated --- C
2 Ordering Information Pin Header (DIP type) A B - 1 P - DS Series Name: A Series No.: B : double row B : single row C : double row (low profile product) Number of contacts: Double row...,,,, 1, 1, 1, 1, 0,,,,, 0,,, 0, 50 ( and 50 contacts correspond to the right angle type only. Straight angle type corresponds to the AC type.) Single row...,,, 5,, 7,, 9,, 11, 1, 1, 1, 15, 1 P, PA: Pin header Contact pitch : mm Contact type DS : Right angle type DSA : Straight type Receptacle (DIP type) A - D - DS Series Name: A Series No.: : double row C : double row D : double row (for FFC, FFC) (Note) Number of contacts: :, 50 C, D :,,,, 1, 1, 1, 1, 0,,,, 50 DA: Receptacle Contact pitch : mm Contact type DS: Right angle type DSA: Straight type (lead length: mm) DSC: Straight type (lead length: mm) DSE: Straight type (lead length: 1.7mm) Crimping Socket A B - D - C Series Name: A Series No.: B : double row B : single row Number of contacts: Double row...,,,, 1, 1, 1, 0,,,, Single row...,,, 5,, 7,, 9,, 1, 15, 1, 1 Contact alignment: D : double row S : single row Contact pitch : mm Connection type: C : crimping C11
3 Crimping Contact A B - 0 SCFC 1 1 Series Name: A Series No.: B Applicable cable size 0: AWG# to AWG#0 : AWG# to AWG# Packaging type SCFC: Reel SCC: Bag Pin Header (SMT type) A A - P A - SV Series Name: A Series No.: Positioning Boss:A : With boss No symbol : Without boss Number of contacts:,,,, 1, 1, 1, 1, 0,,, 0,,, 0, 50 P: Pin header A: Selective gold plating Contact pitch : mm Contact type SV: Board virtical type Receptacle (SMT type) A A - D A - SV Series Name: A Series No.: Positioning Boss: A : With boss No symbol : Without boss Number of contacts:,,,, 1, 1, 1, 1, 0,,, 0, D: Receptacle A: Selective gold plating Contact pitch : mm Contact type: SV: Virtical type C1
4 Pin Header AB Straight Type AB-0PA-DSA AB-0PA-DSA AB-0PA-DSA AB-PA-DSA AB-1PA-DSA AB-1PA-DSA AB-1PA-DSA AB-1PA-DSA AB-0PA-DSA AB-PA-DSA AB-PA-DSA AB-PA-DSA AB-PA-DSA AB-0PA-DSA AB-PA-DSA Note: Please, order the product per 0 pcs ±0.05 B±0.1 ±0.05 Ø _1 AB Right Angle Type AB-0PA-DS AB-0PA-DS AB-0PA-DS AB-PA-DS AB-1PA-DS AB-1PA-DS AB-1PA-DS AB-1PA-DS AB-0PA-DS AB-PA-DS AB-PA-DS AB-PA-DS AB-PA-DS AB-0PA-DS AB-PA-DS AB-PA-DS AB-50PA-DS Kink Positions 1 or alternately alternately or alternately alternately or alternately alternately or 5 alternately 5 alternately 5 or alternately alternately or 7 alternately 7 alternately 7 or alternately alternately 11 alternately 1 or 1 alternately B±0.1 ±0.05 Note 1. Please order the product per 0 pcs. Note. Diameter of or more contacts is Ø0.95±0.0. ±0.05 Note Ø0.9±0.0 C1
5 AB Straight Type AB-0PA-DSA AB-0PA-DSA AB-0PA-DSA AB-05PA-DSA AB-0PA-DSA AB-07PA-DSA AB-0PA-DSA AB-09PA-DSA AB-PA-DSA AB-1PA-DSA AB-1PA-DSA AB-1PA-DSA AB-15PA-DSA AB-1PA-DSA Note: Please order the product per 0 pcs B±0.1 ±0.05 Ø AB Right Angle Type AB-0PA-DS AB-0PA-DS AB-0PA-DS AB-05PA-DS AB-0PA-DS AB-07PA-DS AB-0PA-DS AB-09PA-DS AB-PA-DS AB-11PA-DS AB-1PA-DS AB-1PA-DS AB-1PA-DS AB-15PA-DS AB-1PA-DS Note 1. Please order the product per 0 pcs. Kink Positions 1 or alternately alternately or alternately alternately or alternately alternately or 5 alternately 5 alternately 5 or alternately alternately or 7 alternately 7 alternately 7 or alternately alternately B±0.1 ±0.05 Note Ø0.9±0.0 C1
6 Pin Header Note: Please order the product per 0 pcs. AC-0P-DSA AC-0P-DSA AC-0P-DSA AC-0P-DSA AC-P-DSA AC-1P-DSA AC-1P-DSA AC-1P-DSA AC-1P-DSA AC-0P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-P-DSA AC-50P-DSA Unit: mm C15
7 Receptacle A Right Angle Type A-DA-DS A-50DA-DS Note: Please order the product per 0 pcs. A 50 Unit: mm B C1
8 Receptacle KAC Type Unit: mm C C AC-0DA-DSA AC-0DA-DSC AC-0DA-DSA AC-0DA-DSC AC-0DA-DSA AC-0DA-DSC AC-DA-DSA AC-DA-DSC AC-1DA-DSA AC-1DA-DSC AC-1DA-DSA AC-1DA-DSC AC-1DA-DSA AC-1DA-DSC AC-1DA-DSA AC-1DA-DSC AC-0DA-DSA AC-0DA-DSC AC-DA-DSA AC-DA-DSC AC-DA-DSE AC-DA-DSA AC-DA-DSC AC-DA-DSA AC-DA-DSC AC-DA-DSE AC-50DA-DSA AC-50DA-DSC AC-50DA-DSE C17
9 AD Type AD-0DA-DSE AD-0DA-DSE AD-0DA-DSE AD-DA-DSE AD-1DA-DSE AD-1DA-DSE AD-1DA-DSE AD-1DA-DSE AD-0DA-DSE AD-DA-DSE AD-DA-DSE Unit: mm C1
10 Crimping Socket AB-*D-C AB-0D-C AB-0D-C AB-0D-C AB-D-C AB-1D-C AB-1D-C AB-1D-C AB-0D-C AB-D-C AB-D-C AB-D-C Note 1. * indicates the number of contacts. Note. Please order the product per 0 pcs. Note. Use other contacts in combination. (Example: 50 contacts = contacts + contacts) AB-*S-C AB-0S-C AB-0S-C AB-0S-C AB-05S-C AB-0S-C AB-0S-C AB-S-C AB-1S-C AB-15S-C AB-1S-C AB-1S-C Note 1. * indicates the number of contacts. Note. Please, order the product per 0 pcs. C19
11 Crimping Contact SCC contact SCFC contact Note 1. The plating specification is shown as follows: (Contact area) : Gold plating (Others): Nickel plating Note. "0" is stamped on AB-0SCFC(SCC), and "" is stamped on AB-SCFC(SCC). AB-0SCFC AB-0SCC AB-SCFC Applicable Cable Type Quantity Crimping Tool AWG# to #0 AWG# to #0 AWG# to # Reel Bag Reel Automatic crimper CM-5-AP 5-AB-0 AB-TA0HC Automatic crimper CM-5-AP 5-AB- BCrimping Tool Manual crimping tool AB-TA0HC Automatic crimping machine CM-5 Specification (CM-5 type) Features This tool is a new model to meet many user needs, and finely designed to enhance operativity and expand the application range for setup adjustment and various applicator installations. The easy to handle semi-automatic crimping machine can be used for crimping connection of various strip contacts. Power supply Gross weight Machining range Remarks Specification 0V AC, single phase 00W 75kg 000 to 000 contacts/hour Crimping of various contacts by replacing the applicator Type Item Applicable Contact Applicable Cable Manual Manual crimping tool AB-TA0HC AB-0SCC AWG# to #0 Automatic crimping machine CM Automatic Applicator AP5-AB-0S AP5-AB-S AB-0SCFC AB-SCFC AWG# to #0 AWG# to # C0
12 BShort Pin Please, order the product per 00 pcs. Material Finish A-SP(A) 1-0- Housing Contact PBT Phosphor bronze Black (UL9V-0) Selective gold plating B Polarizing Key A-GPIN(A) Note: This product is provided in a set of pieces in conjunction with a runner. The unit for sale consists of sets, which are included in one pack. Material A-GPIN(A) Poly acetal (white) C1
13 Pin Header PCB mounting pattern for pos. AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-0PA-SV AA-PA-SV AA-PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-1PA-SV AA-0PA-SV AA-0PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-PA-SV AA-50PA-SV AA-50PA-SV Unit: mm C C
14 Receptacle PCB mounting pattern for pos. AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-0DA-SV AA-DA-SV AA-DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-1DA-SV AA-0DA-SV AA-0DA-SV AA-DA-SV AA-DA-SV AA-DA-SV AA-DA-SV AA-DA-SV AA-DA-SV Unit: mm C C
15 BRecommended Temperature Profile 50 MAX 0ç(5sec.Max.) 0ç 00 00ç Temperature (ç) ç Applicable Reflow method : IR reflow Solder : Paste type Sn/7 Pb (Flux content 9%/wt) Test board : Glass epoxy mm Metal mask thichness : 0.mm 50 0 Start 5ç (0sec.) 0sec. Preheating 0 (0sec.) Soldering Recommended temperature profile The temperature may be slightly changed according to the solder paste type and amount. Time (Secounds) BFunctional Block Chart Receptacle and Socket Side A (A)-*DA-SV Straight SMT Type Pin Header Side A (A)-*PA-SV Straight SMT Type A (A)-*DA-DSA(DSC, DSE) Straight Through hole Type AC-*P-DSA Straight Through hole (low profile) Type AB-*D-C Cable crimping type AB-*PA-DSA Straight Through hole Type AB-*PA-DS Right Angle Through hole Type C
16 BApplication Pattern (A series) A(A)-*DA-SV AC-*DA-DSA AB-*D-C A(A)-*PA-SV AC-*DA-DSA A(A)-*PA-SV AB-*D-C A(A)-*PA-SV A(A)-*DA-SV AC-*P-DSA A(A)-*DA-SV AC-*P-DSA AC-*DA-DSA AC-*P-DSA AB-*D-C AB-*PA-DSA A(A)-*DA-SV AB-*PA-DSA AC-*DA-DSA AB-*PA-DSA AB-*D-C AB-*PA-DS AB-*PA-DS AB-*PA-DS Note.When the connector is mounted on the board surface, the mounting height is a size designed in single connector. Solder paste used for installation will slightly change according to solder thickness. C5
2mm Pitch Miniature Connector
mm Pitch Miniature Connector A A Series Product Specifications Rating Features 1. Miniature Type and High Density Mounting These connectors are designed in a miniature and light weight product, and mounted
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2mm Pitch Miniature Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2.54mm Pitch High Density Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be chosen according to applications,
More information2mm Pitch Miniature Connector for HDD
2mm Pitch Miniature Connector for HDD A3E Series Product Specifications Rating type without polarizing guide type with polarizing guide Features 1. Variation in Number of Contacts This connector can be
More information2.54mm Pitch Board to Board Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1.27mm Pitch Two-Piece Connector
1.7mm Pitch Two-Piece Connector HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-83503) HIF Series (Board direct mount type) HIF5 Series 1 (Card edge type)
More information1.27mm Pitch Two-Piece Connectors
1.7mm Pitch Two-Piece Connectors HIF6 Series Connector in combination with the HIF6 series connection type HIF3B Series (MIL-C-833) HIF Series (Board direct mount type) Features 1. Product Variation The
More information1.27mm Pitch Two-Piece Connector
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
More information0.8mm Pitch Stacking Height 5 to 9mm Connector
0.8mm Pitch Stacking Height 5 to 9mm Connector FX6 Series Stacking Height: 5 to 9mm 5~9mm Features 1. Stacking Height 5 to 9mm The board to board stacking height can be set at every millimeter between
More information1.25mm Pitch Miniature Crimping Connector
1.25mm Pitch Miniature Crimping Connector DF13 Series Type Mounting Type Mounting Height(h) Features 1. Miniature Size Designed in the low profile at mounting height 5.8mm. (SMT mounting straight type)
More information1mm Pitch Double Rows Low Profile Wire-to-Board Connectors
mm Pitch Double Rows Low Profile Wire-to-Board Connectors DF series Features. Contact Pitch mm contact pitch allows reliable solder and cable termination.. Reliable electrical connection wipe Effective
More information0.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors
NEW.5mm Pitch Low-Profile Board-to-Board/Board-to-FPC Connectors DF23 Series Low profile - 1.5 mm board-to-board distance Board-to-Board Application Plug Board Receptacle Plug Board FPC -.1 1.5 +.2 -.1
More information1.27mm Pitch Multi-function Two Piece Connector
1.27mm Pitch Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Features 1. Various connection with various product line 2. Easy One-Touch Operation Stacking
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationHalf-pitch and Multi-function Two Piece Connector
Half-pitch and Multi-function Two Piece Connector FX2 Series Stacking connection (Stack height: 12~16mm) 12mm~16mm Horizontal Connection Vertical Connection 25mm Features 1. Various connection with various
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
ll non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSIM Card Sockets. ID1 Series. Features. Applications
SIM Card Sockets ID1 Series Miniature and Thin Photograph (1) Features 1. Suited for Plug-in SIM Cards of the GSM Standard (11.11) In Europe, SIM card Subscriber Identity Modules are used for subscriber
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Standard type Metal cover extends over the back of the connector. Features. Withstands higher force of card insertion
More information0.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors
.4 mm Contact Pitch Board-to-Board /Board-to-FPC Connectors DF4 Series Decrease in the board-occupied area Smaller width Other HRS connector DF4 3.38mm 5.mm Features 1. Higher density of the board-mounted
More information2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
NEW 2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin) DF59 Series Floating Structure in Three xial Directions (Board-to-Board Structure) X
More information0.4 mm Contact Pitch 1.5 mm above the board Board-to-Board /Board-to-FPC Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationminisd TM Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationMemory Stick Connectors
Memory Stick Connectors CB1 Series Card Push Insert/Push Eject Card ejection distance of 1 mm Mounting height of mm Mounting area: Smaller design is 78% of former size Outline Receptacle
More information1.25mm Pitch Miniature Crimping Connector
1.mm Pitch Miniature Crimping Connector DF1 Series Type Mounting Type Mounting Height Straight Type DIP SMT.mm.mm Right Angle Type DIP SMT.mm Features 1. Miniature Size Designed in the low profile at mounting
More information0.4 mm Pitch, 1.5 mm Board-to-Board Connectors with Dual Shields
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationSD Memory Card Connectors
SD Memory Card Connectors DM Series Withstands higher force of card insertion. Card Nov..6 Feb..8 Copyright 8 6 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Withstands higher force of card
More informationUltra-small Rack/Panel Crimp Connectors
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationCompact Flash Card Connectors
Compact Flash Card Connectors Complies with Compact Flash Association MI2/2 Series (a)space-saving design 7. 5.75 Features. Compact design occupies minimum space Connectors are designed with small width
More information2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
2mm Double-Row Connector (Product Compliant to UL/CS Standard) DF11 Series Features 1. Space-saving on Board Realized Double rows of 2mm pitch contact has been condensed within the 5mm width. The multiple
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product ompliant to IN41612/IE603-2 Standard PN Series Pin Header Side Straight through hole type Receptacle Side Straight through hole PN10E- * *P-2.54S PN10E-* *S-2.54S PN10-* *S-2.54S PN10E-* *S-2.54S
More informationHigh Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch)
High Density FPC Connector (0.3mm/0.4mm/0.5mm Pitch) FH16 Series FH16 Series Variation 0.3mm pitch 60 contact 0.3mm pitch 80 contact 0.3mm pitch 90 contact 0.4mm pitch 80 contact 0.5mm pitch 50 contact
More informationMeet requirements of USB 2.0
NEW Meet requirements of USB.0 UX Series Features 1. Certified to perform as required in USB.0 Standard Tested and certified by USB Association approved laboratory the connectors will perform at transmission
More information7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed)
NEW 7.9 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TÜV Listed) DF Series Complete Locking Function Completely enclosed locking system Protection from shorts circuits
More information0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors
0.5 mm Pitch, 6.18 mm Height, Vertical Mount, Shielded FFC High Speed Connectors FH48 Series Supports the next generation chip V-by-One HS* by THine *High speed serial interface technology for picture
More informationPC Card Single Slot SMT Connectors for the AV Market (that Support 5 V Cards)
PC Card Single Slot SMT Connectors for the V Market (that Support 5 V Cards) IC15 Series Reliable card ejection 2-point card ejection Card ejection distance 6mm min Equipment outline Stroke: 11.7mm Ejection
More information0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector
0.4 mm Pitch, Horizontal Mating, Board-to-Micro-Coaxial Cable Connector DF81 Series Enhanced shielding capability Grounding connection between plug connector and receptacle connector 30 contacts: 5 locations
More information0.4 mm Contact Pitch, Board-to-FPC Connectors
.4 mm Contact Pitch, Board-to-FPC Connectors BM14 Series Mating Cross-Section Diagram (H =.8 mm type) Molded structure Two-point contact system Nov.1.217 Copyright 217 HIROSE ELECTRIC CO., LTD. All Rights
More informationMicro-Miniature Interface Connectors For Power Supply/Signaling
All non-rohs have been discontinued, or will be discontinued soon. Please check the status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW
More informationUltra-Small Surface Mount Coaxial Connectors mm Mated Height
All non- products have been discontinued, or will be discontinued soon. the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative. NEW Ultra-Small
More information0.4 mm Pitch, Space-saving Interface Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at your Hirose sales representative. NEW Series Small size.
More information0.635mm Pitch S.O. DIMM Socket
0.635mm Pitch S.O. DIMM Socket SX1 Series Variation in Mounting Height Low Profile Type (Mounting Height: 4.0mm) Standard Type (Mounting Height: 5.5mm) Features 1. 72pos. Small Outline DIMM Socket SX1
More information13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections
13~17 A Compatible, Position Misalignment Absorption Type Power Supply Connector for PCB Connections FX3B Series Example of Connector Mounted Next to Another Connector FX18 Series (without position misalignment
More informationInterface Connectors for Miniature, Portable Terminal Devices
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationUltra Small Surface Mount Coaxial Connectors 1.4mm Mated Height
NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of
More informationUltra Small Surface Mount Coaxial Connectors 1.4mm Mated Height
NEW Ultra Small Surface Mount Coaxial Connectors 1.4mm Mated Height W.FL Series Further downsizing of FL series in response to the market needs. Occupied Mounting Area.0.0 Features 1. Mounting area of
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationBOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS
BOARD/WIRE-TO-BOARD CONNECTORS MINITEK UNSHROUDED VERTICAL HEADERS MINITEK UNSHROUDED VERTICAL HEADERS TECHNICAL INFORMATION MATERIALS Housing: High temperature, black thermoplastic Flammability rating:
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Overview The ST Series interface connectors are specifically designed for use as Input/Output (I/O) connectors on portable information devices.
More information2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces
2 2.2mm Pitch, Wire-to-Wire Connectors for Small Spaces DF62 Series / DF62W Series Features 1. The slim, sleek design and smooth contour combine to complete connections in tight spaces. These connectors
More information0.5 mm Pitch, 1.2 mm above the board, Flexible Printed Circuit & Flexible Flat Cable ZIF Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationDUBOX SHUNTS BOARD/WIRE-TO-BOARD CONNECTORS FEATURES & BENEFITS. Dual-beam contacts for added reliability
BOARD/WIRE-TO-BOARD CONNECTORS DUBOX SHUNTS FEATURES & BENEFITS Dual-beam contacts for added reliability Slotted cutout in low profile housing simplifies electrical testing Side-by-side and end-to-end
More informationMini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard
NEW Mini-B Connectors, SMT mount receptacles meeting requirements of USB 2.0 Standard UX60S Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features. USB 2.0 Standard data transmission
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Jan..0 Copyright 0 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Overview The ST Series
More informationInterface Connectors for Portable Terminal Devices
Interface Connectors for Portable Terminal Devices ST Series Strong locking mechanism Right Mating axial direction Overview The ST Series interface connectors are specifically designed for use as Input/Output
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR J
Emboss Tape.mm pitch/disconnectable Crimp style connectors Radial Tape JST 1 Specifications Current rating: 3 A AC, DC (AWG #) Voltage rating: 0 V AC, DC Temperature range: - C to +8 C (including temperature
More informationHirose Korea FFC To Board Connector
Hirose Korea FFC To Board Connector TF12-Series 목차 1. 제품특징 ------------------------------------------page 2 2. 제품구성및사양 -----------------------------page 3 3. 제품상세내용 ----------------------------------page
More informationmicrosd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
More informationITS-Z0344 Half Pitch Interface Connectors
All non- product have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationUSB 2.0 Standard Connectors
USB 2.0 Standard Connectors UX Series Meets requirements of USB 2.0 Standard USB 2.0 certified Features 1. Compatible to USB 2.0 Standard The UX series connectors are certified by a certification organization
More informationmicrosd Card Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationZH CONNECTOR. 1 Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 1.5mm
Crimp mm (.059") pitch ZH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features Compact, low profile design The ZH connector requires only about 45% of the installation space required by
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) Based upon wire-to-board crimp style PA connectors, the PA series family of connector have
More information0.6 mm Pitch, Docking Station Connectors
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More informationModular Jack Connectors for High-Speed LAN Transmission
NEW Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationAMP Drawer Series Connectors Miniature Power Drawer (MPD) Connectors
Miniature Power Drawer (MPD) Connectors Product Facts High mating cycle life Low Mating and Un-mating force (< 0.2lbs per contact) Single-piece molded housing Molded-in guide pins provide generous blind-mateability
More informationXH5 SMT-compatible Connectors with a 1.27-mm Pitch
New Product Half-pitch SMT Connectors (oard to oard and oard to Cable Connectors) XH5 SMT-compatible Connectors with a -mm Pitch These SMT Connectors can be mounted on the back surfaces of circuit boards.
More informationSM CONNECTOR. 1Certified LR R Disconnectable Crimp style wire-to-wire connectors. Features. Specifications. Standards. 2.
Crimp.mm (.") pitch SM CONNECTOR Disconnectable Crimp style wire-to-wire connectors Features High contact pressure With each insertion and withdrawal, the mating contacts wipe against each other to remove
More informationQUICKIE SHROUDED HEADERS LOW PROFILE
BOARD/WIRE-TO-BOARD CONNECTORS QUICKIE SHROUDED HEADERS LOW PROFILE FEATURES & BENEFITS Recessed pins assure proper alignment and eliminate damage during mating End windows for latching with IDC receptacle
More informationUSB, MINI USB, MICRO USB FIREWIRE & MINI FIREWIRE UNIVERSAL SERIAL BUS &
INTRODUCTION: Adam Tech USB, Mini USB & Micro USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available
More informationES3 Series (WF2 Type) (culus Certified Product)
COMPONENTS PRODUCT INFORMATION NEW Board-to Cable Connector For LED Lighting Power Supply ES3 Series (WF2 Type) (culus Certified Product) CONNECTOR MB-0227-3 July 2012 RoHS Compliant Receptacle (ES3B002WF2)
More information1Certified LR R Inner-housing lock. Outer-housing lock
.mm pitch/disconnectable Crimp style connectors (Combined use for both wire-to-board and wire-to-wire connections) a 0 This VL connector is designed for wire-towire and wire-to-board. mm pitch connector
More informationCABLE CONNECTOR 6100/6200/6200S/6230 SERIES. 2.54mm Pitch Flat Ribbon Cable Connector K-7
CABLE CONNECTOR 2.54mm Pitch Flat Ribbon Cable Connector 6/6/6S/62 SERIES K-7 6/6/6S/62 SERIES 2.5mm PITCH FC CONNECTOR 2.54mm Pitch FC Connector Product Line-up SERIES / FIGURE TYPE CONNECTOR STYLE TERMINATION
More informationPA FAMILY SERIES/PA PAF PAL CONNECTOR
PA FAMILY SERIES/PA PAF PAL CONNECTOR 2.0mm pitch/wire-to-board (Crimp style/idc) / Wire-to-wire (Crimp style/idc) PAF Receptacle (IDC style) PA Shorouded header (Top entry type) PAF Receptacle (IDC style)
More informationXH2. Half-pitch Board-to-Board Connectors
Half-pitch Board-to-Board Connectors XH2 Allows High-density Mounting for Electronic Devices. A Half-Pitch Connector with a 1.27-mm Pitch for Compactness. A pitch of 1.27 mm for high-density mounting of
More information0.5mm and 1mm Pitch, 2mm Height, FPC/FFC ZIF Connectors
.5mm and mm Pitch, 2mm Height, FPC/FFC ZIF Connectors FH52 Series Secure actuator retention Metal fittings are designed to hold and stabilize the actuator May..27 Copyright 27 HIROSE ELECTRIC CO., LTD.
More informationCMC Hybrid Connectors Standard and Power Versions
The Molex family of provides a sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry The CMC connector
More information0.2 mm Pitch, 1.2 mm Height, FPC Connector
0.2 mm Pitch,.2 mm Height, FPC Connector FH29 Series Easy mounting with double-sided lead design.2 mm height,.55 mm mounting depth.2mm.55mm Features. Space saving 0.2 mm pitch FPC connector Super thin,
More informationUSB, MINI USB, MICRO USB FIREwIRE & MINI FIREwIRE UNIVeRSAl SeRIAl BUS & Ieee 1394 FIRewIRe USB & FwC SeRIeS
introduction: Adam Tech USB (Universal Serial Bus) and IEEE 1394 (Firewire) Series connectors are a complete line of shielded, hot pluggable, high speed I/O interface connectors available in a variety
More informationSN Series - Part Numbering
SN Series - Part Numbering Features Push-pull technology Miniature circular Light weight Low cost Applications Professional audio and video CCTV system Portable wireless radio Factory Automation Computers
More informationModular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Dec..207 Copyright 207 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features. Supports High-Speed LAN Transmission
More informationConnector with mm square contacts DIC- 131 DIC- DIC- 129 DIC- 128A DIC- 129A AC 500V AC 1000V. 20 milliohms or less
mm Pitch Connectors DIC series mm Pitch Connectors Outline The DIC series provides various connectors for switching between circuits on PCB in combination with various male connectors, for various-pattern
More informationCZ FAMILY SERIES/CZ CZW CZH CZHW TZ TZW
CZ FAMILY SERIES/CZCZWCZHCZHWTZTZW 1.5mm pitch/disconnectable Insulation displacement connectors RPZ connector: Receptacle RPZ connector: Plug CZW connector: Header CZ connector: header CZ connector: TZ
More informationModular Jack Connectors for High-Speed LAN Transmission
Modular Jack Connectors for High-Speed LAN Transmission TM2R Series Built-in Optical Indicators Optical indicator LED Optical pipe Features. Supports High-Speed LAN Transmission Meets requirements of TIA/EIA-568-B
More informationmicrosd Card Connectors
NEW microsd Card Connectors DM Series Features Common to the entire Series. Extremely small size Small external dimensions and the above-the-board height make the connectors the smallest on the market..
More informationmicrosd Card Connectors
microsd Card Connectors DM Series Jan..08 Copyright 08 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features Common to the entire Series. Extremely small in size Small external dimensions and the above-the-board
More informationPC/104, PC/104 Plus Specification
PC/104, PC/104 Plus Specification Industry Standard bus connection systems, typically used on embedded PC applications. Designed for oard-to-oard stacking with a common bus. PC/104 Connectors mm pitch
More informationPower Connectors & Interconnection Systems
Product Facts Available in latch versions for VRMs up to 3 oz. Available with metal clip for VRMs over 3 oz. VRM connectors to support a wide variety of power supply standards Solder tail, press-fit and
More informationPC Board Sockets. Specifications SOCKETS. Surface Mount, Single Piece construction. Throughboard, Two Piece construction. Materials.
Sockets Contents SMT PCB Sockets Sockets For Ø0.5mm Pin Sockets For Ø0.8mm Pin Sockets For Ø1mm Pin Sockets For Ø2mm Pin Test Sockets IC Socket Strip Dual Row IC Socket Surface Mount, Single Piece construction
More informationKM025B Series. Features. Application. 025 ( 0.64 mm ) / Standard. Rev. 002 (' ) 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터
Features 1. 표준소형커넥터제품 2. 강화된체결음, 커넥터삽입력을만족한감성품질이우수한커넥터 3. 자동차의소형, 경량화요구에대응한제품 4. 세경전선에대응가능한 W/H 작업성구현 5. 신소재를적용하여외부온도및충격에의한제품파손을개선 Application 1. Switch Unit, Heater Control Unit, Cluster, AVN etc 차량용
More informationMini-Universal MATE-N-LOK Connectors
MP Mini-Universal MTE-N-LOK Product Facts Compact, durable housings Pins and sockets can be accommodated in the same housings Contacts fully protected in the housings. Both pins and sockets can be used
More informationBoard-to-Board Connectors
91 Board to Board (,, Wrapping) Board Mounting Type Contact Pitch (mm) Stack Height Remarks Series Name Page 0.4 0.5 0.6 0.65 0.8 1 1.27 2 1.5mm 2 to 2.5mm 3 to 5mm 5 to 8mm 2 to 3mm 4 to 5mm 3 to 4mm
More informationPGA / BGA / PLCC SOCKETS
PGA / BGA / PLCC SOCKETS QUICK SELECTOR CHART PGA / BGA / PLCC PGA BGA PLCC GRID 2.54 mm INTERSTITIAL 1.27 mm 1.27 mm 1 mm SOCKETS Solder tail 156 161 165 SEE PAGE 173 Surface mount 156 161 165 166 169
More informationPRODUCT SPECIFICATION
1.25 mm pitch SMT Wire to Board Connector 1 of 7 A 1.0 SCOPE This specification covers performance, tests and quality requirements for 1.25 mm pitch Wire to Board DIP & SMT Type of 10114826~10114831 Series.
More informationComponent Product Information: MB-6062E mm staggered Contact Spacing, Double Rows Dec 97
Component Product Information: MB-6062E-2 1.25mm staggered Contact Spacing, Double Rows Dec 97 LCD Interface Connector, FI Series??? Connector GENERAL: This LCD Interface connector is designed to be used
More information