Energy Flex Electronic controllers for centralised air-conditioning units General Description Eliwell, a leading manufacturer for over a decade of control equipment for small and medium-size air conditioning units is proud to present Energy Flex, the new range of compact devices with advanced functions and innovative applications for the HVAC market. Features: Energy saving and innovative applications in a new range of controllers for the HVAC market Single or double-circuit control of centralised air-conditioning systems with 2 or 4 compressors (steps), such as: Chiller : air-air; air-water; water-water; Condensing units: Air Chiller; Water Chiller; Heat Pump: air-air; air-water; water-water with gas inversion; water-water with water inversion; Air Heat Pump Water Heat Pump Main functions: User interface with configurable buttons Navigation Menu configurable Parameters set through device interface / remote terminal or PC Large Historical alarms memory Copy Card to upload and download the controller parameter map Remote terminal (up to 100 m) to be directly connected without serial interfaces Configurable inputs NTC, 4 20mA, 0...1V, 0...5V o 0...10V by parameters Thermoregulation on inlet or outlet water temperature configurable Automatic changeover Dynamic set point ON/OFF and proportional condensation control without external devices up to 2A Boiler control or electric heater for the heating Indoor ventilation control Management of semi-hermetic, scroll and screw compressors up to 2 stages Control of single refrigerant circuit up to 4 compressors or 1 compressor with 4 stages Control of 2 refrigerant circuits up to 2 compressors/stages per circuit Summary Models and Technical data Energy SB600 SB646/C/S 4 DO 6 SB655/C/S 5 DO 5 Energy SD600 6/C/S SD636/C/S 3/4 DO 6 SD655/C/S 5 DO 5 Energy SC600 SC646/C/S SC636/C/S 3/4 DO 6 SC655/C/S 5 DO 5 Expansions SE632 - SE646 - SE655 4/5 DO 6/5 Remote terminals SKP10 32x74mm remote terminal SKP22(L) - SKW22(2L) LCD remote terminal Accessories AIR CONDITIONING LEGENDA DO Digital Outputs Analogue Outputs
Plus points Versatile installation Thanks to the offer of several models and highly flexible configuration, the controller can be adapted to suit a variety of applications, from the single unit to the whole system. The hardware platforms have several I/O configurations and several sizes to give maximum versatility of installation. The expansion modules enable to increase the number of resources to control, so to meet even the most complex application needs User interface Connectivity and control The whole Energy Flex range has front plates that can be customised with icons and manufacturer s logo for a market differentiation. The 4-digit display with 18 icons, 7 of which configurable, offers a clear readability, with dedicated units of measures for each value displayed. Using the 4 push buttons it is possible to activate all the main controller functions, like modifying the current display, selecting the operating mode, activating defrost and switching the controller on/off, as well as browse the menu organized into folders. The access to the folders and parameters is configurable through three different levels: end user, service and constructor. The Energy Flex range is completed by different remote terminals: with a small-dimension led display for panel mounting (SKP10) and the others with a backlit LCD display (SKP22L, SKW22L), with modern and attractive design that easily fits in with the furnishing, for wall mounting. All Energy Flex controllers are equipped with a serial connection which enables the easy integration with the plant supervision, monitoring and management systems. The management of most of the systems functions is possible through the ModBus standard communication protocol, ensuring a complete control of the plant. Thanks to the connectivity moduls RadioAdapter, LanAdapter or BusAdapeter, it is possible to exploit the connections Wireless or the Ethernet or even RS 485 for the remote plant management. The new SW DeviceManager, is not used to monitor and record the system variables in real time, simplifying the plant set-up for the lab tests, but enables also a quick controller programming. With an optional Copy Card it is possible to upload and download the controller parameter map for fast configuration, download the alarm history and upload the software applications. Energy saving High capacity within the microprocessor's memory equips the instrument with advanced adjustment algorithms. This includes a modulating control of the water pump, dynamic defrost, analogue condensation control and heat pump deactivation for very low external temperatures. These controls can be used to reduce energy consumption within the installed system with significant impact. The addition of a high number of analogue outputs provides increased flexibility so that any kind of utility can be managed with power modulation to increase the energy efficiency of the device.
Display and LEDS operating modes and states User Interface Icon Description Colour ON Blinking Alarm Red Alarm generated Alarm silenced Heating Green Heating mode Antifreeze with heat pump Remote Heating mode Cooling Green Cooling mode Remote Cooling mode Stand-by Green Stand-by mode Remote stand-by mode Defrost Green Defrost enabled Manual defrost enabled Economy Green Configurable Configurable Values with units of measure Clock Red View Programming / View current clock time Degrees centigrade Red / / Pressure (bar) Red / / Relative humidity Red / / Menu Red Navigation menu / State of loads LED display of SB600, SD600 and SKP 10 remote terminal. Reference example. UP+DOWN reset Keys SB600 - SD600 / SKP 10 hold down: defrost UP DOWN hold down: ON/OFF With the 4 keys, you can easily modify the current display, select the operating mode, activate defrost and switch the controller on/off, as well as browse the menu arranged in folders. hold down: change mode hold down: main view *hold down SD600 (4 DIN) buttons have the same functionalities. esc set esc+set reset Remote Terminal SKP22 - SKP22L F1 defrost F2 change mode F3 ON/OFF *hold down change mode* set main view* defrost* UP PRG esc+set param. programm. * UP+DOWN reset* Remote Terminal SKW22 - SKW22L esc+set reset esc set mode Prg disp UP+DOWN reset* main view* DOWN ON/OFF*
Models and Specifications Models available Digital Digital TRIAC PWM Analogue Analogue Digital Inputs outputs output outputs outputs Inputs outputs model part number (*) (**) (**) SELV ( ) SELV ( ) SELV ( ) SELV ( ) SB646/C/S SB64123512400 6 4 1 2 3 5 1 YES SB646/C SB64123511400 6 4 1 2 3 5 1 NO SD646/C/S SD64123512400 6 4 1 2 3 5 1 YES SD646/C SD64123511400 6 4 1 2 3 5 1 NO SC646/C/S SC64123512400 6 4 1 2 3 5 1 YES SC646/C SC64123511400 6 4 1 2 3 5 1 NO SB655/C/S SB65023512400 6 5-2 3 5 1 YES SB655/C SB65023511400 6 5-2 3 5 1 NO SD655/C/S SD65023512400 6 5-2 3 5 1 YES SD655/C SD65023511400 6 5-2 3 5 1 NO SC655/C/S SC65023512400 6 5-2 3 5 1 YES SC655/C SC65023511400 6 5-2 3 5 1 NO SE632 SE63020310400 6 3-2 - 3 1 NO SE646 SE64123510400 6 4 1 2 3 5 1 NO SE655 SE65023510400 6 5 0 2 3 5 1 NO SD/SC636 models with 2 TRIAC/SSR available. Contact Eliwell for more information ( ) low voltage (SELV - SAFETY EXTRA LOW VOLTAGE) - /C for models equipped with RTC - /S for models equipped with (*) voltage free (**) high voltage part number Mounting Dimensions Display Analogue Power mm Inputs ( ) SKP10 SKP1000000000 panel 32x74x30 led / 4 digit - from main module SKP22 SKP2200000000 panel 160 x 96 x 10 LCD 1+1* from main module SKP22L SKP22L0000000 panel 160 x 96 x 10 backlit LCD 1+1* from main module SKW22 SKW2200000000 wall 137 x 96,5 x 31,3 LCD 2** from main module SKW22L SKW22L0000H00 wall 137 x 96,5 x 31,3 backlit LCD 2** 100...240Va *1 on board NTC probe - 1 NTC/DI/4..20mA current configurable analogue input ( ) **1 NTC probe - 1 NTC/DI/4..20mA current configurable analogue input ( ) Mechanical Assembly and Dimensions SB600 - SKP10 SB600 - SKP10 SD600-SC600-SE600 70mm 30mm 29mm 71mm 61.6mm SD 70.2mm SC SE 70.2mm 70mm 30mm SKP10 87mm 74mm 32mm 28mm 76mm 28mm 43.6mm 5.2mm 76mm SB 56.4mm Remote terminal SKW22(L) Remote terminal SKP22-SKP22L esc set 96.5 mm A 138 B 137.0 mm E F 84 31.3 68 C D 90 2.7 (x 6) 150
SB646/C/S SD646/C/S SC646/C/S SB655/C/S SD655/C/S SC655/C/S Features SB-D-C646 4 DO 6 /C RTC /S Wiring diagrams Format: SB646/C/S: 32x74x80mm (Lxhxd) SD646/C/S: 4 DIN module with display SC646/C/S: 4 DIN module without display I/O: 4 digital outputs 2A 230Va [DO1, DO2, DO3, DO4] 6 analogue outputs : 1 analogue outputs with dangerous voltage [TC1] 2A 230Va 2 analogue ouputs [1, 2] PWM/Open Collector 3 analogue outputs with safe voltage [3, 4, 5] 5 analogue inputs [ AI5] 1 digital output with safe voltage (SELV) [DO5] Open Collector /C RTC /S RS485 serial port ( for /S models) TTL supplied as standard Power : 12...24Va LAN Connection to remote terminal / SE600 - + G 4 SD646/C SD646/C/S SC646/C SC646/C/S SE646 G 3 5 SB646/C SB646/C/S DI1 DI2 DI3 DI4 DI5 DI6 2 5 6 7 8 9 10 11 12 AI3 2 AI4 DI6 AI5 AI5 DI5 AI4 DI4 AI3 DI3 DI2 DI1 3 G 5 4 + - G - + G 5 6 7 8 9 10 11 12 TTL N DO3 DO2 DO1 TC2 TC1 SD636/C SD636/C/S SC636/C/S SC636/C/S 4 G 3 5 DI1 DI2 DI3 DI4 DI5 DI6 DO4 1 LAN AI3 AI4 AI5 DO5 Features SB-D-C 655 5 DO 5 /C RTC /S Wiring diagrams SB655/C SB655/C/S AI5 AI4 AI3 2 DI6 DI5 DI4 DI3 DI2 DI1 6 - + G DO3 DO3 SD655/C SD655/C/S SC655/C SC655/C/S SE655 3 G 5 4 + - G 5 6 7 8 9 10 11 12 6 Format: SB655/C/S: 32x74x80mm (Lxhxd) SD655/C/S: 4 DIN module with display SC655/C/S: 4 DIN module without display I/O: 5 digital outputs 2A 230Va [DO1, DO2, DO3, DO4, DO6] 5 analogue outputs: 2 analogue ouputs [1, 2] PWM/Open Collector 3 analogue outputs with safe voltage [3, 4, 5] 5 analogue inputs [ AI5] 1 digital output with safe voltage (SELV) [DO5] Open Collector /C RTC /S RS485 serial port ( for /S models) TTL supplied as standard Power : 12...24Va / 24Vc LAN Connection to remote terminal / SE600 4 G 3 5 DI1 DI2 DI3 DI4 DI5 DI6 2 AI3 AI4 AI5
Probe red /+12Vdc Probe Expansions SE632 SE646 SE655 Remote terminals SKP 10 SKP22(L) SKW22(L) Features I/O SE632: 3 digital outputs 2A 230Va [DO1, DO2, DO3] 2 Analogue outputs: with safe voltage [1, 2] I/O SE646: 4 digital outputs 2A 230Va [DO1, DO2, DO3, DO4] 6 Analogue outputs: 1 analogue outputs with dangerous voltage [TC1] 2A 230Va 2 analogue ouputs [1, 2] PWM/Open Collector 3 analogue outputs with safe voltage [3, 4,5] I/O SE655: 5 digital outputs 2A 230Va [DO1, DO2, DO3, DO4,DO6] 5 Analogue outputs: 2 analogue ouputs [1, 2] PWM/Open Collector 3 analogue outputs with safe voltage [3, 4,5] Common features: 4DIN module without display 5 analogue inputs [ AI5] SE646 - SE655 1 digital output with safe voltage (SELV) [DO5] Open Collector TTL supplied as standard Power : 12...24Va SE646 12...24Va / 24Vc SE632 SE655 LAN Connection to remote terminal SE 4 DO 6 / SE 5 DO 5 Wiring diagrams 5 3 G 4 5 3 G 4 SE646 DI1 DI2 DI3 DI4 DI5 DI6 2 SE632 DI1 DI2 DI3 DI4 DI5 DI6 2 1 2 3 4 5 6 7 8 NC AI3 SE655 7 8 9 10 NC AI4 DO6 AI5 AI5 1 2 3 4 5 6 7 8 DI1 DI2 DI3 DI4 DI5 DI6 2 NC AI3 AI4 AI5 Features SKP 10 - SKW22(L) - SKP22(L) R E D SKP 10 B L U E B L A C K +12V LAN AIR1 AIR2 Probes B R LA E D C K B L U E SKP22(L) Energy Flex Energy Flex DO NOT CONNECT +12Vdc to 3 SB646/C/S Digital input SB646/C/S NO! black / blue / signal red /+12Vdc Probe (a) SKW22L Power 95...240Vac possibilità di alimentare il trasduttore mediante il morsetto +12Vdc Pressure Transducer SKW22 (a) black / blue / signal red /+12Vdc red /+12Vdc blue / signal Probe black / PROBE NOT INCLUDED SONDE NON INCLUSE (b)
Transformer Description Accessories part number 230/12V - 5VA (protected) 230/12V - 11VA (protected) Temperature probes Probe NTC 103AT, 1,5m (plastic cap, 2 wire cable); Probe NTC 5x20, 1.5m TPE IP68; Probe NTC 6x40, 1.5m TPE STEEL IP68; Probe NTC 6x50, 1.5m TPE STEEL IP68; Other items available Pressure transducers - Ratiometric Sensors Pressure switches TF411200 TF411210 SN691150 SN8T6H1502 SN8T6A1502 SN8T6N1502 Contact Eliwell connection male female EWPA030, Pressure transducer 4..20mA/0..30bar; TD200130 TD200002 EWPA007, Pressure transducer 4..20mA/-0.5..7bar; TD200107 TD300008 EWPA030 R, Ratiometric sensor 0...5V/0..30bar;... TD400030 EWPA050 R, Ratiometric sensor 0...5V/0..50bar;... TD400050 Other items available Contact Eliwell HR range (automatic reset) - minimum 100,000 ON/OFF cyclesvarious codes available HL range ( reset) - minimum 6,000 ON/OFF cycles HC range (automatic reset) - minimum 250,000 ON/OFF cycle Contact Eliwell Fan modules CFS: single phase speed regulators for currents from 2A to 9A Various codes CFS05 TANDEM: TRIAC 5A+5A/230V~ available DRV 300: 3 phase 12 20A/420V~ (IP22 or IP55) Contact Eliwell Expansion EXP211: 230V 10A expansion module with base - mounted on DIN rail MW320100 Multi-Function Key Smart key to up/download parameters, alarm history, applications MFK100T000000 Cables Interface modules Connectivity Connection cable for signal line (low voltage I/O) Connection cable for analogue outputs Connection cable for serial port Connection cable 3-ways for remote terminal DMI100-1 End User DMI100-2 Service DMI100-2 Manufacturer DeviceManager WebAdapter BusAdapter150 TTL-RS485 RadioAdapter TTL/WIRELESS 802.15.4 COLV0000E0100 COLV000042100 COLV000035100 COLV000033200 DMI1001002000 DMI1002002000 DMI1003002000 DMP1000002000 WA0ET00X700 BA10000R3700 Various codes available Contact Eliwell Demo Case VAL00031K
Eliwell Controls S.r.l. Via dell Industria, 15 Zona Industriale Paludi 32010 Pieve d Alpago (BL) Italy Telephone +39 0437 986 111 Facsimile +39 0437 989 066 Sales: +39 0437 986 100 (Italy) +39 0437 986 200 (other countries) saleseliwell@invensys.com Technical helpline: +39 0437 986 300 E-mail techsuppeliwell@invensys.com www.eliwell.com rel. 09-10 cod. CT123040 Subject to errors/subject to amendments without notice Eliwell Controls s.r.l. 2008-2010 All rights reserved.