CONTENTS CONTROLLERS room controllers room units control units PRODUAL 3 CATALOGUE

Transcription

1 Catalogue 207

2 CONTENTS CONTROLLERS... 4 room controllers... 5 room units control units PRODUAL 3 CATALOGUE

3 T U R KU I C T C ON T R OL L E R S Multifunctional controllers for optimal performance of automated buildings. The HLS room controller family is ideal for the control of chilled beams, radiators, fan coils, VAV, floor heating and light control with or without a built-in CO 2 sensor. Controllers for 3-speed fans and for the continuous control of EC fans are included. The PDS controller family is ideal for HVAC control and single parameter control applications. Intelligent Modbus-based devices enable the planning of versatile and cost-efficient HVAC control systems. The wide selection covers room control applications ranging from office buildings and hotels to customized solutions. Versatile and multifunctional HVAC control devices Several input and output variations Modbus communication Suitable for e.g. EC-fans and 3-speed fans

4 HLS 6 is a -stage controller for room temperature control. Both heating and cooling are controlled by using the same valve. The function of the valve can be changed by using external (summer/ winter) switch connected to the Z terminal. 24 Vac, < VA Set point C, ±3 C Accuracy ±0,5 C 24 Vac, A, for thermal actuator (NC or NO) with screws on wall or on a junction box (hole distance 60 mm) 86 x 86 x 32 mm HLS controller for floor heating/cooling HLS 6-N 506 with display HLS 2 is a 2-stage controller for room temperature control. The controller has one thermal (PWM) actuator stage for both heating and cooling. 24 Vac, < 2 VA Set point C, ±3 C Accuracy ±0,5 C (cooling) 24 Vac, A, for thermal actuator (heating) 24 Vac, A, for thermal actuator with screws on wall or on a junction box (hole distance 60 mm) 86 x 86 x 32 mm HLS controller with internal temperature sensor HLS 2-EXT 5002 controller for an external NTC0 temperature sensor HLS 2-N 500 with display HLS 2-N-EXT 5003 controller for an external NTC0 temperature sensor and display PRODUAL 5 CATALOGUE

5 HLS 33 is a room temperature controller with 2 or 3 stages. One stage is for heating and up to two stages for cooling. The controllers can be used with V, 3-point or thermal (PWM) actuators. 24 Vac, < 2 VA Set point C, ±3 C Accuracy ±0,5 C 2 x Vdc, 2 ma, for heating and cooling 2 x 24 Vac, A, for heating and cooling with screws on wall or on a junction box (hole distance 60 mm) 86 x 86 x 32 mm HLS controller with internal temperature sensor HLS 33-EXT controller for an external NTC0 temperature sensor HLS 33-N 5009 with display HLS 33-N-EXT for an external NTC0 temperature sensor with display TH driver for thermal actuators, 5 outputs HLS 44 is a multifunctional controller designed especially for individual room temperature and zone control applications. Controller has a galvanically isolated RS-485 connection for Modbus RTU communication. 24 Vac/dc, < VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. Set point adjusting by push buttons or by Modbus communication Vdc, for CO₂ measurement or external setpoint DI, for PIR or card switch external sensor or DI (door/window contact or condensation switch) Accuracy ±0,5 C 4 x Vdc, 2 ma, for VAV, fan, heating and cooling 2 x 24 Vac, A, for heating and cooling with screws on wall or on a junction box (hole distance 60 mm) 87 x 86 x 32 mm HLS room temperature controller with Modbus communication HLS 44-SER 5025 configuration tool for HLS 44 FCRY fan coil relay, input Vdc PRODUAL 6 CATALOGUE

6 HLS 44-V is a multifunctional controller designed especially for individual room temperature and light control applications. Controller has a galvanically isolated RS-485 connection for Modbus RTU communication. 24 Vac/dc, < VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. Set point adjusting by push buttons or by Modbus communication Vdc, for CO₂ measurement or external setpoint DI, for PIR or card switch external sensor or DI (door/window contact or condensation switch) Accuracy ±0,5 C 2 x Vdc, 2 ma, for VAV and fan 2 x 24 Vac, A, for heating and cooling 2 x 24 Vac, 0.5 A, for on/off damper and lights with screws on wall or on a junction box (hole distance 60 mm) 87 x 86 x 32 mm HLS 44-V room temperature controller for fan coil VAV and lights, Modbus communication HLS 44-SER 5025 configuration tool for HLS 44 FCRY fan coil relay, input Vdc RYVA relay for fluorescent lamps, 0 A (inrush current < 80 A, < 2,5 ms) PRODUAL 7 CATALOGUE

7 HLS 44-CO2 is a multifunctional controller designed especially for individual room temperature and zone control applications. Controller has a built-in CO₂ sensor and a galvanically isolated RS-485 connection for Modbus RTU communication., CO₂ 24 Vac/dc, < VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. Set point adjusting by push buttons or by Modbus communication Vdc, for external setpoint or external temperature DI, for PIR or card switch external sensor or DI (door/window contact or condensation switch) Accuracy (temperature) ±0,5 C Accuracy (CO₂) typ. ±40 ppm +3 % from value 4 x Vdc, 2 ma, for VAV, fan, heating and cooling 2 x 24 Vac, A, for heating and cooling with screws on wall or on a junction box (hole distance 60 mm) 87 x 86 x 32 mm TYPE ART NO. HLS 44-CO room temperature controller with built-in CO 2 sensor and Modbus communication HLS 44-CO2-SER 5037 configuration tool for HLS 44-CO2 FCRY fan coil relay, input Vdc PRODUAL 8 CATALOGUE

8 HLS 44-3P is a multifunctional controller designed especially for individual room temperature and zone control applications. Controller has a galvanically isolated RS-485 connection for Modbus RTU communication. 24 Vac/dc, < VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. Set point adjusting by push buttons or by Modbus communication Vdc, for CO₂ measurement or external setpoint DI, for PIR or card switch or fresh air boost external sensor or DI (door/window contact or condensation switch) Accuracy ±0,5 C 2 x Vdc, 2 ma, for VAV and fan 2 x 24 Vac, A, for thermal actuators or 3-point actuator 2 x 24 Vac, 0.5 A, for thermal actuators or 3-point actuator with screws on wall or on a junction box (hole distance 60 mm) 87 x 86 x 32 mm HLS 44-3P room temperature controller with Modbus communication, 3-point actuator control HLS 44-3P-SER 5028 configuration tool for HLS 44-3P FCRY fan coil relay, input Vdc PRODUAL 9 CATALOGUE

9 HLS 44-6W is a multifunctional controller designed especially for individual room temperature and zone control applications. Controller has a galvanically isolated RS-485 connection for Modbus RTU communication. One 0 0 V output can be configured to control a 6-way valve. 24 Vac/dc, < 2 VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. Set point adjusting by push buttons or by Modbus communication Vdc, for CO₂ measurement or external setpoint DI, for PIR or card switch external sensor or DI (door/window contact or condensation switch) Accuracy ±0,5 C 4 x Vdc, 2 ma, for VAV, fan, heating and cooling 2 x 24 Vac, A, for heating and cooling with screws on wall or on a junction box (hole distance 60 mm) s 87 x 86 x 32 mm HLS 44-6W room temperature controller with Modbus communication, 6-way valve control HLS 44-6W-SER 5030 configuration tool for HLS 44-6W FCRY fan coil relay, input Vdc PRODUAL 20 CATALOGUE

10 HLS 44-BAC is a versatile room controller for individual room temperature and VAV control applications. Controller has a galvanically isolated RS-485 connection for BACnet MS/TP communication. 24 Vac/dc, < VA NOTE: Only the 0 0 V outputs and BACnet work when using DC supply voltage. Set point adjusting by push buttons or by BACnet communication Vdc, for CO₂ measurement or external setpoint DI, for PIR or card switch external sensor or DI (door/window contact or condensation switch) Accuracy ±0,5 C 4 x Vdc, 2 ma, for VAV, fan, heating and cooling 2 x 24 Vac, A, for heating and cooling with screws on wall or on a junction box (hole distance 60 mm) 87 x 86 x 32 mm TYPE ART NO. HLS 44-BAC 5030 room temperature controller with BACnet communication FCRY fan coil relay, input Vdc PRODUAL 2 CATALOGUE

11 HLS 45 is a versatile room controller for individual room temperature and VAV control applications. HLS 45 is excellent for both 2-pipe FCU and floor heating and cooling applications. The controller has a galvanically isolated RS-485 connection for Modbus RTU communication. 24 Vac/dc, < VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. Set point adjusting by push buttons or by Modbus communication Vdc, for CO₂ measurement DI, for summer/winter or day/night switch return water temperature or external sensor or DI (summer/winter or day/night switch) Accuracy ±0,5 C 3 x Vdc, 2 ma, for VAV, fan and heating/ cooling valve control 2 x 24 Vac, A, for thermal actuators or 3-point actuator with screws on wall or on a junction box (hole distance 60 mm) 87 x 86 x 32 mm HLS room temperature controller with Modbus communication HLS 45-SER 5027 configuration tool for HLS 45 FCRY fan coil relay, input Vdc PRODUAL 22 CATALOGUE

12 R02 is a multifunctional controller specifically designed for individual room temperature and zone control applications. 24 Vac, < 2 VA Set point 9 25 C IP protection class external sensor condensation sensor or DI 2 x 24 Vac, 2 A, for cooling and heating IP20 s TYPE ART NO. with screws on wall or on junction box 77 x 77 x 27 mm R room controller, 24 Vac outputs R room controller, V outputs H configuration tool RS02 is a multifunctional controller specifically designed for individual room temperature and zone control applications. Controller has a built-in 2 h timer for forced ventilation. 24 Vac, < 2 VA Set point 9 25 C condensation sensor or DI 2 x 24 Vac, 2 A, for cooling and heating Vdc, 0 ma, for forced ventilation with screws on wall or on junction box s 77 x 77 x 27 mm RS room controller H configuration tool PRODUAL 23 CATALOGUE

13 C ON T R OL U N I T S The C230 control unit can be used to control heating, cooling and fan coil unit with an EC motor or a 3-speed control. The key card switch can be connected to the control unit for economy functions if the room is not used regularly. The system also has advanced control functions and Modbus communication facility. The ROU room unit with a touch panel display is easy to operate in any room. It also has a screen saver if the lighting level is perceived disturbing. The ROU room unit and the C22 control unit work well together as a single control solution in any room. The ROU room unit has a touch panel with a color display and a built-in temperature sensor. It can be equipped with optional builtin CO 2 and PIR sensors. When connected to the C22 control unit, it also has advanced control functions and Modus communication facility. This functional duo controls the heating and cooling demands of the room. The CO 2 option allows to control ventilation in alignment with heating and cooling if the CO 2 level rises above a healthy level. The built-in PIR sensor option allows to save energy when the room is unused by preventing unnecessary heating, cooling or ventilation. PRODUAL 24 CATALOGUE

14 CONTROL UNITS PDS 2 is a temperature controller for air handling unit, hot domestic water and heating applications. The controller supports Pt000 temperature sensors. The thermal actuators can be either V controlled or 3-point controlled. The controller has RS-485 connection for Modbus RTU communication. IP protection class 24 Vac/dc, < 2 VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. 3 x Pt000 or 2 x Pt000 + x potentiometer x 0 0 V / digital 4 x Vdc, 2 ma 4 x 24 Vac, A, triac IP20 For 35 mm DIN rail 53 x 90 x 58 mm TYPE ART NO. PDS controller AT pocket TEAT PT immersion water sensor TEHR PT room sensor TEHR PT 000-P/PDS room sensor + set point for PDS 2 TEK PT duct sensor TENA PT domestic water sensor TEP PT pipe strap-on sensor TEU PT outdoor sensor CONTROL UNITS PDS 2.2 universal controller can be used for controlling e.g. pressure, humidity or temperature. The controller supports V controlled, 3-point controlled or thermal actuators. The controller has RS-485 connection for Modbus RTU communication. C, %rh, Pa, bar, CO, CO₂, m/s, lx IP protection class 24 Vac/dc, < 2 VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. 0 0 V, measurement 0 0 V, external set point setting Vdc, 2 ma 2 x 24 Vac, A, for thermal actuators or 3-point actuators 0 Vdc, 2 ma, for 4, kω potentiometer IP20 For 35 mm DIN rail 53 x 90 x 58 mm PDS universal controller PRODUAL 25 CATALOGUE

15 CONTROL UNITS HS 2.2-M is a universal controller designed for HVAC applications. It can be used for controlling e.g. pressure, differential pressure, temperature or illumination level. Display is possible to scale according to the measurement. Controller has a galvanically isolated RS-485 connection for Modbus RTU communication. C, %rh, Pa, bar, CO, CO₂, m/s, lx 24 Vac/dc, < VA NOTE: Only the 0 0 V outputs and Modbus work when using DC supply voltage. 0 0 V, 0 kω 2 x DI, potential free contact 3 x Vdc, 2 ma 24 Vac, A, for thermal actuator or 3-point actuator 0 Vdc, error signal with screws on wall or on a junction box 87 x 86 x 30 mm HS 2.2-M universal controller, room housing CONTROL UNITS C22 is a versatile control unit specifically designed for individual room temperature, VAV and zone control applications. Controller has a galvanically isolated RS-485 connection for Modbus RTU Communication. 24 Vac, < 2 VA Set point 9 25 C 3 x external sensor or Vdc 2 x 24 Vac, 2 A, for cooling and heating 2 x Vdc, 0 ma, for cooling and heating IP protection class IP44 s 80 x 22 x 40 mm C middle roof control unit E room unit with set point potentiometer E room unit with set point potentiometer and fan speed control switch E room unit with set point potentiometer and timer E room unit with display E room unit with display and fan speed control H configuration tool ROU-F room operating unit (flush mounting) ROU-S room operating unit (surface mounting) PRODUAL 26 CATALOGUE

16 CONTROL UNITS C222 is a versatile control unit specifically designed for individual room temperature, VAV and zone control applications. Controller has a galvanically isolated RS-485 connection for Modbus RTU Communication. 24 Vac, < 2 VA Set point 9 25 C IP protection class s 3 x external sensor or Vdc 2 x 24 Vac, 2 A, for cooling and heating 2 x Vdc, 0 ma, for cooling / fan speed and heating relay control port IP44 80 x 22 x 40 mm C middle roof control unit with relay control port E room unit with set point potentiometer E room unit with set point potentiometer and fan speed control switch E room unit with set point potentiometer and timer E room unit with display E room unit with display and fan speed control H configuration tool K control cable (5 cm) for relay unit RL relay unit ROU-F room operating unit (flush mounting) ROU-S room operating unit (surface mounting) PRODUAL 27 CATALOGUE

17 CONTROL UNITS C230 is a multifunctional controller designed especially for individual room temperature and zone control applications. C230 is supplied with 230 V and it controls fan coil units and actuators. Controller has a galvanically isolated RS-485 connection for Modbus RTU communication. The controller has a terminal with 24 Vac (0 VA) supply voltage for external equipment. 230 Vac, < 4 VA temperature sensor NCT0 or Vdc secondary temperature sensor NCT0 or Vdc occupancy or Vdc setpoint 2 x Vac, heating / cooling 2 x Vdc, heating / cooling / VAV / EC fan control 3 x 2,5 A relays for fan coil unit Ambient temperature C 200 x 20 x 53 mm C V room temperature controller with Modbus communication H configuration tool ROU-F room operating unit (flush mounting) ROU-S room operating unit (surface mounting) PRODUAL 28 CATALOGUE

18 ROOM UNITS ROU is an advanced room unit with easy to-use touch screen functionality. It is designed to be used with above the-ceiling control units. The basic room unit includes temperature measurement. Other measurements like CO 2 or PIR are available as options. 24 Vac Set point 8 26 C Ambient temperature C Humidity %rh ROU-S ROU-F room operating unit (surface mounting) room operating unit (flush mounting) OPTIONS ROU-S-CO2-opt CO₂ option ROU-PIR-opt 5038 PIR option ROOM UNITS E2x room units are designed to be used with the C22/C222 control units. All units have a built in temperature sensor and a set point knob. Units with timer and fan speed buttons also available. The indicator light indicates the current function (red (heating), blue (cooling), off (dead zone)). 2 Vdc, < W, supplied from C22/C222 Set point 9 25 C IP protection class IP30 Ambient temperature C 87 x 86 x 30 mm E room unit with set point potentiometer E room unit with set point potentiometer and fan speed control switch E room unit with set point potentiometer and timer PRODUAL 29 CATALOGUE

19 ROOM UNITS E20x room units are designed to be used with the C22, C222 and C230 control units. Both units have a built in temperature sensor and a set point buttons. E202 room unit has a fan speed button also. The room unit can be used to access the control unit menus and parameters. 2 Vdc, < W (supplied from C22/C222) Set point 9 25 C IP protection class IP30 Ambient temperature C Humidity %rh 89 x 89 x 26 mm E room unit with display E room unit with display and fan speed control PRODUAL 30 CATALOGUE

20 CONTROLLER SELECTION GUIDE Controller Application Actuator Function HLS 6 HLS 2 HLS 33 HLS 44 HLS 44-V HLS 44-3P HLS 44-6W 4-pipe fan coil unit control 2-pipe fan coil unit control Floor heating Floor heating/cooling HLS 44-BAC Chilled beam Heating radiator control Domestic water temperature control Air handling unit control 6-way valve control Universal controller Middle roof installation Thermal 3-point V Control stages 2 2/3 2/3 2/3 2/3 2/3 2/3 /2 2/2 2/ 2/2 2/2 2/2 Control modes P P P P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI P/PI 3-speed fan control with FCRY 3 EC fan control VAV control Summer/winter CO 2 based ventilation control Lighting control on/off Modbus BACnet HLS 45 PDS 2 R02 RS02 R222 PDS 2.2 HS 2.2-M C22 C222