HT Timing elt Pulleys - 3 mm Pitch LUMINUM OUL FLNG PROFIL FIRLO HU P SRW P SRW W.9.9 FOR 6 mm LTS (. INH) MTRIL: luminum lloy FINISH: lear nodized atalog Number P.. * ore W Length ia. Proj. ap 63-00F04 63-0F06 63-04F06 63-05F06 63-06F06 63-08F08 63-00F08 63-0F08 63-04F08 63-05F08 63-06F08 63-0F08 63-03F08 63-034F08 63-0F08 63-0F08 63-044F08 * Tolerance: 0 to 6 grooves is +.00, to 44 grooves is +.003, 0 4 5 6 8 0 4 5 6 3 34 44.376.45.56.564..677.75.87.90.9.977.8.03.78.353.504.654.346.4.496.534.57.647.7.797.87.90.947.098.73..33.474.64.505.580.635.685.70.790.895.945.05.0.05.33.398.473.65.775.5.7.7 9/6 9/6 3/3 3/3.0.580.65.65.65.750.750 5/64 5/64 /3 5/6 5/6 #-56 #-56 #-56 #-56 #4- #4- -65 RV:.5.08 MH
HT Timing elt Pulleys - 3 mm Pitch LUMINUM TRU MTRI PROFIL OUL FLNG ST SRW /.8 W / ST SRW.8 FOR 6 mm LTS (. INH) MTRIL: luminum lloy FINISH: lear nodized atalog Number P.. * tolerance from: 0 to 6 grooves is +.00,. 8 to 44 grooves is +.003,. * ore.5.5 63-00F04 63-00F06 0.376.346.505 63-0F04.376.384.5 63-0F06.44.4.580 63-03F06 3.45.459. 63-04F06 4.9.496.635 63-05F06 63-05F08 5.564.534.685 63-06F06 6..57.70 63-07F06 7.639.9.7 63-08F08 8.677.647.790 63-09F08 9.74.684.85 63-00F08 0.75.7.895 63-0F08.87.797.945 63-04F08 4.90.87.05 63-05F08 5.9.90.0 63-06F08 6.977.947.05 63-08F08 8.053.03.73 63-0F08.8.098 63-03F08 3.03.73.33 63-034F08 34.78..398 63-0F08.353.33.473 63-038F08 38.49.399.549 63-0F08.504.474.65 63-044F08 44.654.64.775 NOT: Pulleys with 0 to 3 grooves have set screw; others have at 90. W.7 Length 9/6 9/6 9/6 9/6 3/3 ia..505.5.580..635.685.70.7.44.468.56.65.70.776.85.9.000.075.50.0 Proj. 5/64 5/64 5/64 5/64 5/6 Set #4- #4- #6- #6- #6- #6- #6- TIMING PULLYS INH For pulley stock and flanges, see Section 4. 66
HT Timing elt Pulleys - 3 mm Pitch LUMINUM PROFIL NO FLNG F ST SRW / MTRIL: luminum lloy FINISH: lear nodized FOR 6 mm LTS (. INH) atalog Number P.. * ore F Face Width Length ia. Proj. 63-08NF08 63-09NF08 63-00NF08 63-0NF08 63-04NF08 63-05NF08 63-06NF08 63-08NF08 63-0NF08 63-03NF08 63-034NF08 63-0NF08 63-038NF08 63-0NF08 63-044NF08 63-045NF0 63-0NF0 63-050NF0 63-056NF0 63-0NF0 63-06NF0 63-068NF0 63-07NF0 63-080NF0 8 9 0 4 5 6 8 3 34 38 44 45 50 56 6 68 7 80 NOT: ll pulleys have set screws at 90..677.74.75.87.90.9.977.053.8.03.78.353.49.504.654.69.805.880.05.56.33.556.707 3.008.647.684.7.797.87.90.947.03.098.73..33.399.474.64.66.775.850.075.6..56.677.978.7.7.7.7 3/3 47/64 47/64 47/64.44.468.56.65.70.776.85.9.000.075.50.0 5/6 /64 /64 /64 * Tolerance: 8 to 6 grooves is +.00, 8 to 50 grooves is +.003, 56 to 80 grooves is +.004, -67 RV 3-7-06 SS
HT Timing elt Pulleys - 3 mm Pitch LUMINUM TRU MTRI PROFIL OUL FLNG ST SRW /. W / ST SRW. FOR 9 mm LTS (.354 INH) MTRIL: luminum lloy FINISH: lear nodized atalog Number P.. * tolerance from: 0 to 6 grooves is +.00,. 8 to 44 grooves is +.003,. * ore 63-00F0904 0.376.346.505 63-0F0904.44.384.5.5 63-0F0906.45.4.580 63-03F0906 3.9.459. 63-04F0906 4.56.496.635 63-05F0906 5.564.534.685 63-06F0906 6..57.70 63-07F0906 7.639.9.7 63-08F0908 8.677.647.790 63-09F0908 9.74.684.85 63-00F0908 0.75.7.895 63-0F0908.87.797.945 63-04F0908 4.90.87.05 63-05F0908 5.9.90.0 63-06F0908 6.977.947.05 63-08F0908 8.053.03.73 63-0F0908.8.098 63-03F0908 3.03.73.33 63-034F0908 34.78..398 63-0F0908.353.33.473 63-038F0908 38.49.399.549 63-0F0908.504.474.65 63-044F0908 44.654.64.775 NOT: Pulleys with 0 to 3 grooves have set screw; others have at 90. W.506.506.506.57 Length 7/3 ia..505.5.580..635.685.70.7.44.468.56.65.70.776.85.9.000.075.50.0 Proj. 5/64 5/64 5/64 5/6 Set #4- #6- #6-
HT Timing elt Pulleys - 3 mm Pitch LUMINUM TRU MTRI PROFIL NO FLNG F ST SRW / MTRIL: luminum lloy FINISH: lear nodized FOR 9 mm LTS (.354 INH) atalog Number P.. * ore F Face Width Length ia. Proj. 63-08NF0908 63-09NF0908 63-00NF0908 63-0NF0908 63-04NF0908 63-05NF0908 63-06NF0908 63-08NF0908 63-0NF0908 63-03NF0908 63-034NF0908 63-0NF0908 63-038NF0908 63-0NF0908 63-044NF0908 63-045NF090 63-0NF090 63-050NF090 63-056NF090 63-0NF090 63-06NF090 63-068NF090 63-07NF090 63-080NF090 8 9 0 4 5 6 8 3 34 38 44 45 50 56 6 68 7 80 NOT: ll pulleys have set screws at 90..677.74.75.87.90.9.977.053.8.03.78.353.49.504.654.69.805.880.05.56.33.556.707 3.008 * Tolerance: 8 to 6 grooves is +.00, 8 to 50 grooves is +.003, 56 to 7 grooves is +.004,.647.684.7.797.87.90.947.03.098.73..33.399.474.64.66.775.850.075.6..56.677.978.506.506.506.57 7/3.44.468.56.65.70.776.85.9.000.075.50.0 5/6 3/8 3/8 3/8-69 RV 3-7-06 SS
HT Timing elt Pulleys - 3 mm Pitch MOL WITH INSRT TRU MTRI PROFIL OUL FLNG /8 ST SRW 9/64 ST SRW /6 SPOT RILL SPOT RILL FOR 9 mm LTS (.354 INH) MTRIL: Pulley - Polycarbonate, Fiberglass Reinforced Insert - luminum, Knurled ll imensions In Inches atalog Number 6Z3-00F0906 6Z3-0F0906 6Z3-0F0906 6Z3-03F0906 6Z3-04F0906 6Z3-05F0906 6Z3-06F0906 6Z3-07F0906 6Z3-07F0908 6Z3-08F0906 6Z3-08F0908 6Z3-09F0906 6Z3-09F0908 6Z3-00F0906 6Z3-00F0908 6Z3-0F0906 6Z3-0F0908 6Z3-05F0908 6Z3-05F090 6Z3-05F09 6Z3-08F0908 6Z3-08F090 6Z3-08F09 " long insert in hub end only. 0 3 4 5 6 7 8 9 0 5 8 P...376.44.45.9.56.564..639.677.74.75.87.9.05.346.384.4.459.496.534.57.9.647.684.7.797.90.03.63.69.78.8.87.06.9.4 ore ia. ia. Set #6-3 #6-3 3/8 / #6-3 ontinued on the next page TIMING PULLYS INH 70
NW SIZS HT Timing elt Pulleys - 3 mm Pitch MOL WITH INSRT PROFIL OUL FLNG 9/64 ST SRW 5/6 5/3 ST SRW 3/6 SPOT RILL SPOT RILL 3/6 FOR 9 mm LTS (.354 INH) MTRIL: Pulley - Polycarbonate, Fiberglass Reinforced Insert - luminum, Knurled ll imensions In Inches atalog Number P.. ore ia. ia. Set 6Z3-0F0908 6Z3-0F090 6Z3-0F09 6Z3-03F0908 6Z3-03F090 6Z3-03F09 6Z3-0F0908 6Z3-0F090 6Z3-0F09 6Z3-0F0908 6Z3-0F090 6Z3-0F09 6Z3-0F0908 6Z3-0F090 6Z3-0F09 6Z3-0F090 6Z3-0F09 6Z3-0F096 6Z3-07F090 6Z3-07F09 6Z3-07F096 6Z3-080F090 6Z3-080F09 6Z3-080F096 3 7 80.9.05.354.504.803.56.709 3.008.098.73.33.47.77.4.677.976.34.46.57.77.0..9 3.7 / / #0-3 -7 RV -3-06 J
NW SIZS HT Timing elt Pulleys - 3 mm Pitch MOL WITH INSRT TRU MTRI PROFIL SINGL FLNG * /8 ST /6 SRW 9/64 ST SRW /6 SPOT RILL SPOT RILL FOR 9 mm LTS (.354 INH) MTRIL: Pulley - Polycarbonate, Fiberglass Reinforced Insert - luminum, Knurled ll imensions In Inches atalog Number 6Z3-00SF0906 6Z3-0SF0906 6Z3-0SF0906 * 6Z3-03SF0906 6Z3-04SF0906 6Z3-05SF0906 6Z3-06SF0906 6Z3-07SF0906 6Z3-07SF0908 6Z3-08SF0906 6Z3-08SF0908 6Z3-09SF0906 6Z3-09SF0908 6Z3-00SF0906 6Z3-00SF0908 6Z3-0SF0906 6Z3-0SF0908 6Z3-05SF0908 6Z3-05SF090 6Z3-05SF09 6Z3-08SF0908 6Z3-08SF090 6Z3-08SF09 6Z3-0SF0908 6Z3-0SF090 6Z3-0SF09 * =, flush with end. " long insert in hub end only. 0 3 4 5 6 7 8 9 0 5 8 P...376.44.45.9.56.564..639.677.74.75.87.9.053.8.346.384.4.459.496.534.57.9.647.684.7.797.90.03.098.63.69.78.8.87.06.9.4.34 ore ia. ia. Set #6-3 #6-3 3/8 #6-3 / ontinued on the next page TIMING PULLYS INH 7
HT Timing elt Pulleys - 3 mm Pitch TRU MTRI PROFIL MOL WITH INSRT SINGL OR NO FLNG / 9/64 ST SRW 5/6 5/3 ST SRW / 3/6 3/8 3/6 #0-3 ST SRW 3/6 SPOT RILL 3/6 SPOT RILL SPOT RILL 3 MTRIL: Pulley - Polycarbonate, Fiberglass Reinforced Insert - luminum, Knurled atalog Number 6Z3-03SF0908 6Z3-03SF090 6Z3-03SF09 6Z3-0SF0908 6Z3-0SF090 6Z3-0SF09 6Z3-0SF0908 6Z3-0SF090 6Z3-0SF09 6Z3-0SF0908 6Z3-0SF090 6Z3-0SF09 6Z3-0SF090 6Z3-0SF09 6Z3-0SF096 6Z3-07SF090 6Z3-07SF09 6Z3-07SF096 6Z3-080SF090 6Z3-080SF09 6Z3-080SF096 6Z3-084SF090 6Z3-084SF09 6Z3-084SF096 6Z3-096SF090 6Z3-096SF09 6Z3-096SF096 6Z3-0NF09 6Z3-0NF096 3 7 80 84 96 3 0 P.. SINGL FLNG.03.353.504.805.56.707 3.008 3.58 3.9 NO FLNG 4.5.73.33.474.775.6.677.978 3.8 3.579 4..44.57.76.0.46.9 3.9 3.38 3.83 FOR 9 mm LTS (.354 INH) ore ll imensions In Inches ia. / / ia. Set #0-3 #0-3 #0-3 TIMING PULLYS INH 73
Shaftloc HT Pulleys - 3 mm Pitch MOL WITH MTL INSRT SINGL OR OUL FLNG.53 9/6 I..65 +.00.65 +.00.53 OR I. 9/64 3/3 FOR 9 mm LTS (.354 INH) MTRIL: Pulley - Nylon - lack, Fiberglass Reinforced Insert - Steel, Overmolded atalog Number Single Flange ouble Flange 6T3-H3SF090 6T3-HSF090 6T3-HSF090 6T3-H4SF090 6T3-HSF090 6T3-H50SF090 6T3-HSF090 6T3-H7SF090 6T3-H3F090 6T3-HF090 6T3-HF090 6T3-H4F090 6T3-HF090 3 4 50 7 P...03.353.504.579.805.880.56.707 NOT: The Shaftloc shown below may be used to secure these pulleys on the shaft. pplicable Shaftloc Sleeve (For Shaftloc Introduction and use, see page 3 88).73.33.474.549.775.850.6.677.3.47.6.70.9.00.37.83 PULLY OR (Ref.) 7/3 OR I. HX atalog Number 7Z37-0553 MTRIL: 46 Stainless Steel Pulley ore (Ref.).65 Max. Torque apacity* lb. in. *ased on mating components being degreased before assembly with Shaftloc coupling. 50-74 RV 8-4-06 J
NW SIZ HT Timing elt Pulleys - 3 mm Pitch MOL TRU MTRI PROFIL OUL FLNG 5/6 3/6 3 FOR 9mm LTS (.354 INH) MTRIL: Polycarbonate, Fiberglass Reinforced atalog Number 6L3-00F0906 6L3-0F0906 6L3-0F0906 6L3-03F0906 6L3-04F0906 6L3-05F0906 6L3-06F0906 6L3-07F0906 6L3-08F0906 6L3-09F0906 6L3-00F0906 6L3-0F0906 6L3-05F0908 6L3-08F0908 6L3-0F0908 6L3-03F0908 6L3-0F0908 6L3-0F0908 6L3-0F0908 6L3-0F090 6L3-07F090 6L3-080F090 (Solid) 3 0 3 4 5 6 7 8 9 0 5 8 3 7 80 P...376.44.45.9.56.564..639.677.74.75.87.9.053.8.03.353.504.805.56.707 3.008.346.384.4.459.496.534.57.9.647.684.7.797.90.03.098.73.33.474.775.6.677.978.63.69.78.8.87.06.9.4.34.44.57.76.0.46.9 3.9 ore ia. TIMING PULLYS INH NOT: Pulleys with 0 to 8 grooves do not have webs. 75
NW SIZ HT Timing elt Pulleys - 3 mm Pitch MOL TRU MTRI PROFIL SINGL OR NO FLNG /6 / /6 3/6 / 3 3/6 4 3/6 FOR 9mm LTS (.354 INH) atalog Number 6L3-00SF0906 6L3-0SF0906 6L3-0SF0906 6L3-03SF0906 6L3-04SF0906 6L3-05SF0906 6L3-06SF0906 6L3-07SF0906 6L3-08SF0906 6L3-09SF0906 6L3-00SF0906 6L3-0SF0906 6L3-05SF0908 6L3-08SF0908 6L3-0SF0908 6L3-03SF0908 6L3-0SF0908 6L3-0SF0908 6L3-0SF0908 6L3-0SF090 6L3-07SF090 6L3-080SF090 6L3-084SF090 6L3-096SF090 MTRIL: Polycarbonate, Fiberglass Reinforced (Solid) 3 0 3 4 5 6 7 8 9 0 5 8 3 7 80 84 96 P.. SINGL FLNG.376.346.44.384.63.45.4.9.459.56.496.69.564.534.78..57.8.639.9.87.677.647.74.684.75.7.87.797.06.9.90.9.053.03.4.8.098.34.03.73.44.353.33.57.504.474.76.805.775.0.56.6.46.707.677.9 3.008.978 3.9 3.58 3.8 3.38 3.9 3.579 3.83 ore Length ia. Proj. NO FLNG 6L3-0NF09 4 0 4.5 4. 3/8 flush with end. TIMING PULLYS INH NOT: Pulleys with 0 to 8 grooves do not have webs. 76 5/6 3/8