Absolute encoders multiturn
|
|
- Colin Bradford
- 5 years ago
- Views:
Transcription
1 PROFIBUS P The multiturn encoders Sendix 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 8 bits these encoders are available with blind hollow shaft up to 5 mm. RoHS / C IP Mechanical drive Safety-ock TM High rotational speed Temperature range High protection level High shaft load capacity Shock / vibration resistant Magnetic field proof Reverse polarity protection Optical sensor Surface protection salt spray-tested optional Reliable Tried-and-tested in applications with the highest demands, such as in wind energy or mobile automation. Absolutely reliable operation in areas with strong magnetic fields, thanks to mechanical gear with optical sensor technology. Flexible Fast, simple, error-free connection using versions with M connector. Wide-ranging programming options thanks to latest encoder profile. Order code Shaft version Type. X X X. X a b c d e f If for each parameter of an encoder the underlined preferred option is selected, then the delivery time will be 0 working days for a maximum of 0 pieces. Qts. up to 50 pcs. of these types generally have a delivery time of 5 working days. a Flange = clamping flange, IP65 ø 58 mm [.8 ] = clamping flange, IP67 ø 58 mm [.8 ] = synchro flange, IP65 ø 58 mm [.8 ] 4 = synchro flange, IP67 ø 58 mm [.8 ] 5 = square flange, IP mm [.5 ] 7 = square flange, IP mm [.5 ] b Shaft (ø x ), with flat = 6 x 0 mm [0.4 x 0.9 ] ) = 0 x 0 mm[0.9 x 0.79 ] ) = /4 x 7/8 4 = /8 x 7/8 c Interface / power supply = PROFIBUS P V0 encoder profile V., V C d Type of connection, removable bus terminal cover = with radial cable gland fitting = with x radial M connectors, 5-pin e Fieldbus profile = PROFIBUS P V0 encoder profile class f Options (service) = no option = SET button Optional on request - Ex / - surface protection salt spray tested Order code Hollow shaft Type. X X X. X a b c d e f If for each parameter of an encoder the underlined preferred option is selected, then the delivery time will be 0 working days for a maximum of 0 pieces. Qts. up to 50 pcs. of these types generally have a delivery time of 5 working days. a Flange with torque stop = with spring element, long, IP65 = with spring element, long, IP67 = with stator coupling, IP65 ø 65 mm [.56 ] 4 = with stator coupling, IP67 ø 65 mm [.56 ] 5 = with stator coupling, IP65 ø 6 mm [.48 ] 6 = with stator coupling, IP67 ø 6 mm [.48 ] ) Preferred type only in conjunction with flange type. ) Preferred type only in conjunction with flange type. b Blind hollow shaft = ø 0 mm [0.9 ] 4 = ø mm [0.47 ] 5 = ø 4 mm [0.55 ] 6 = ø 5 mm [0.59 ] 8 = ø /8 9 = ø / c Interface / power supply = PROFIBUS P V0 encoder profile V., V C d Type of connection, removable bus terminal cover = with radial cable gland fitting = with x radial M connectors, 5-pin e Fieldbus profile = PROFIBUS P V0 encoder profile class f Options (service) = no option = SET button Optional on request - Ex / - surface protection salt spray tested Fritz Kübler GmbH, subject to errors and changes. 04/06
2 PROFIBUS P Mounting accessory for shaft encoders Mounting accessory for hollow shaft encoders 8 0, Cylindrical pin, long with fixing thread , SW7 [0,8] 0,6 0,6 4 m8 Coupling bellows coupling ø 9 mm [0.75 ] for shaft 6 mm [0.4 ] bellows coupling ø 9 mm [0.75 ] for shaft 0 mm [0.9 ] for torque stops M4 0,8 R 7 0,8 Connection technology Connector, self-assembly (straight) coupling M for bus in 05.BMWS connector M for bus out 05.BMSWS connector M for power supply 05.B84-0 Cordset, pre-assembled M cordset for bus in, 6 m [9.68 ] PUR cable M M cordset for bus out, 6 m [9.68 ] PUR cable M M cordset for power supply, m [6.56 ] PUR cable M Further accessories can be found in the accessories section or in the accessories area of our website at: Additional connectors can be found in the connection technology section or in the connection technology area of our website at: Absolute encoders multiturn Technical data Mechanical characteristics Maximum speed IP65 up to 70 C [58 F] IP65 up to Tmax IP67 up to 70 C [58 F] IP67 up to Tmax Starting torque - at 0 C [68 F] IP65 < 0.0 Nm IP67 < 0.05 Nm Mass moment of inertia shaft version.0 x 0-6 kgm hollow shaft version 7.5 x 0-6 kgm oad capacity of shaft radial 80 N axial 40 N 9000 min -, 7000 min - (continuous) 7000 min -, 4000 min - (continuous) 8000 min -, 6000 min - (continuous) 6000 min -, 000 min - (continuous) Weight with bus terminal cover approx kg [0. oz] with fixed connection approx. 0.5 kg [8.4 oz] Protection acc. to EN 6059 housing side shaft side Working temperature range IP67 IP65, opt. IP67 Materials shaft / hollow shaft stainless steel flange aluminium housing zinc die-cast cable PVC Shock resistance acc. to EN Vibration resistance acc. to EN C C [-40 F F] 500 m/s, 6 ms 00 m/s, Hz Electrical characteristics Power supply Power consumption (no load) Reverse polarity protection of the power supply V C max. 0 ma yes U approval file 468 CE compliant acc. to SET button (zero or defined value, option) Protection against accidental activation. Button can only be operated with a ball-pen or pencil. iagnostic E (yellow) E is ON with following errors EMC guideline 04/0/EU RoHS guideline 0/65/EU Sensor error (Profibus error) Fritz Kübler GmbH, subject to errors and changes. 04/06
3 PROFIBUS P Interface characteristics PROFIBUS P Resolution singleturn Number of revolutions (multiturn) Total resolution Code Interface (6 bit), scaleable default: 89 ( bit) ( bit), scaleable (8 bit), scaleable default: (5 bit) binary Interface specification acc. to PROFIBUS-P.0 / standard (IN 945 part ) / RS485 driver galvanically isolated Protocol Profibus encoder profile V. class and class with manufacturer-specific add-ons Baud rate max. Mbit/s evice address... 7 set by rotary switches Termination switchable set by IP switches Profibus encoder profile V. The PROFIBUS P device profile describes the functionality of the communication and the user-specific component within the Profibus field bus system. For encoders, the encoder profile is definitive. Here the individual objects are defined independent of the manufacturer. Furthermore, the profiles offer space for additional manufacturer-specific functions; this means that Profibus-compliant device systems can be used now with the guarantee that they are ready for the future too. The following parameters can be programmed irection of rotation. Scaling (number of steps per revolution). Preset value. iagnostics mode. The following functionality is integrated Galvanic isolation of the bus stage with C/C converter. ine driver acc. to RS485 max. MB. Address programmable via IP switches. iagnostics E. Full class and class functionality. Terminal assignment terminal box Interface Type of connection BUS IN BUS OUT Signal: B A 0 V + V 0 V + V B A (terminal box) Terminal: Interface Type of connection Function Signal: PB_A PB_B Shield Pin: 4 5 Power Signal: +V 0 V ( x M connector) supply Pin: 4 The shield of the connection cable must be connected over a large area via the cable gland Signal: BUS_VC ) PB_A BUS_GN ) PB_B Shield Pin: ) For supplying an external Profibus P termination resistor. 4 Fritz Kübler GmbH, subject to errors and changes. 04/06
4 PROFIBUS P imensions shaft version, with removable bus terminal cover imensions in mm [inch] Synchro flange, ø 58 [.8] Flange type and 4 4,5 [0,57] 5,5 [.0] M4, 6 [0.4] deep 50 [,97] 58 [,8] 40 [,57] 60 [,6] Fit 6 [0.4] 0 [0.9] h7 0 [0.9] 0 [0.79] f7 /4 7/8 h7 /8 7/8 h7 Clamping flange, ø 58 [.8] Flange type and (drawing with x M connector) x M, 6 [0.4] deep [0,] [0,] 4 [0,6] 86 [,9] 87, [,4] 9 [0.75] 4 [,65] x 0 57 [.4] 50 [.97] 57 [.4] 50 [.97] Absolute encoders multiturn x M4, 8 [0.] deep 58 [.8] 5 [.] 6 [.4] 58 [.8] 5 [.] 6 [.4] 40 [.57] 40 [.57] 48 [.89] 48 [.89] Fit 6 [0.4] 0 [0.9] h7 0 [0.9] 0 [0.79] f7 /4 7/8 h7 /8 7/8 h7 0 [0.9] 0 [0.9] [0.] [0.] [0.] 4,5 0,57 [0.] 0 [.8] 0 [.8] 76 [.0] 76 [.0] 77, [.0] 77, [.0] 4,5 0, x0 x0 Square flange, 6.5 [.5] Flange type 5 and 7 57 [,4] 57 [,4],75 h7 [,5],75 h7 [,5] 40 [,57] 60 [,6] 40 [,57] 60 [,6] 7, [0,8] 7, [0,8] 4,5 [0,57] 7,5 [0,] 7,5 [0,] 0 [,8] 0 [,8] 78,5 [,] 78,5 [,] 79,5 [,] 79,5 [,] 4,5 [0,57] 5,5 [0,] 5,4 [,06] 5,5 [0,] 6,5 [,5] 5,4 [,06] 6,5 [,5] Fit 6 [0.4] 0 [0.9] h7 0 [0.9] 0 [0.79] f7 /4 7/8 h7 /8 7/8 h7 Fritz Kübler GmbH, subject to errors and changes. 04/06 5
5 max. [.] 4 4 [0.6] 84, [.] 9,4 [.6] 4,5 [0.57] 9 [0.75] 40 [.58] H7 x0,4 [0.09] 5,5 [.0] 4 [0.55],99-0,0 [0.6] 4 [.65] 6,7 [.44] 40,9 [.6] 5 0 0,79 4,5 [0.57] x0 57,4 4, [0.7] max. [.] 40 [.57] H7 6,48 max., Absolute encoders multiturn Profibus-P imensions hollow shaft version (blind hollow shaft), with removable bus terminal cover imensions in mm [inch] Flange with spring element, long Flange type and (drawing with x M connector) Torque stop slot, recommendation: cylindrical pin IN 7, ø 4 [0.6] M, 5.5 [0.] deep Recommended torque for the : Insertion depth for blind hollow shaft: 0 [.8] Flange with stator coupling, ø 6 [.48] Flange type 5 and 6 Pitch circle diameter for fixing screws 6 [.48] Recommended torque for the : Insertion depth for blind hollow shaft: 0 [.8] 4,5 0,57 57, 40,57 60,6 68,68 H7 0,8 0,0 4 0,6 84, 9,6 9 0,75, 0, Flange with stator coupling, ø 65 [.56] Flange type and 4 Pitch circle diameter for fixing screws 65 [.56] (drawing with x M connector) Recommended torque for the : Insertion depth for blind hollow shaft: 0 [.8],5 [0.09] 94, [.7] 95,5 [.76] 9 [0.75] 65 [.56] 6 Fritz Kübler GmbH, subject to errors and changes. 04/06
ENCODER. Profibus Multiturn. Series , Key-Features:
ENCODER Profibus Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Technical Data Profibus Interface Connection Technical Drawing......3...4...4...5 - Solid shaft: maximum diameter 0 mm
More informationStandard PROFINET IO. RoHS. High shaft load capacity. High protection level. Flexible
The encoders Sendix 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with PROFINET technology. The encoder supports the isochronous (IRT) mode and
More informationStandard CANopen/CANopenLift. RoHS. High protection level. High shaft load capacity. Flexible
CANopen/CANopenift The Sendix multiturn encoders 868 and 888 with CANopen or CANopenift interface and optical sensor technology are the right encoders for all CANopen or CANopenift applications. With a
More informationAbsolute Encoders Multiturn
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of
More informationRotary Measuring Technology Absolute encoders, Multiturn, Profibus-DP
Mechanical drive Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationRotary Measuring Technology Absolute encoders, Singleturn, Profibus-DP
Safety-Lock TM High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable Increased ability
More informationAbsolute Encoders Multiturn
The multiturn encoders 5868 and 5888 with interface and optical sensor technology are ideal for use in all applications with a interface. The encoder supports the isochronous (IRT) mode and is therefore
More informationENCODER. CANopen Multiturn. Series , Key-Features:
ENCOER CANopen Multiturn Series 8.5868, 8.5888 Key-Features: Content: Order Code Solid Shaft... Order Code Blind Hollow Shaft... Technical ata... CANopen Interface...5 Connection...6 Technical drawing...7
More informationRoHS. High shaft load capacity. Shock / vibration resistant
Due to their sturdy bearing construction in Safety-Lock Design, the Sendix 5000 and 5020 offer high resistance against vibration and installation errors. The rugged housing, high protection level of up
More informationAbsolute Encoders Multiturn
The multiturn encoders 6 and 8, with interface and combined optical and magnetic sensor technology, offer a maximum resolution of 5 bits. These encoders are programmable via the Ezturn software. The hollow
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-40 to 80 C IP Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Reliable
More informationRotary Measuring Technology
Multiturn Type 8 Profibus-DP Very compact (only 87.8 mm installation depth); Ideal for dynamic applications thanks to its non-contact multiturn stage Solid shaft or blind hollow shaft Long service life
More informationRoHS. Shock / vibration resistant. Short circuit proof. Flexible. . XXXX e. . XXXX e
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via
More informationRotary Measuring Technology Absolute encoders, Multiturn, DeviceNet
High IP High shaft load capacity Shock/vibration resistant Short-circuit proof Reverse polarity protection Compact and Rugged: Minimal installation depth High shock and vibration values Very compact (only
More informationEncoders Absolute Singleturn Encoder Types A58CS8
Types A58CS8 Sturdy design with hardened bearings High rotation speed -40...+80 C/-40...+76 F operating temperature range High shock and vibration resistance Magnetic field proof also available as explosion
More informationRotary Measurement Technology Absolute Encoders, Multiturn
-40 to 80 C IP Mechanical drive Safety-LockTM High rotational speed Temperature High IP High shaft load capacity Shock/ vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection
More informationRotary Measuring Technology Absolute encoders, Multiturn, optional with incremental track
Electronic multiturn gear with intelligent sensing technology (IST) Integrative Technology Max. 4 programmable outputs* for the SSI version Programmable parameters include*: code type, resolution per revolution,
More informationAbsolute encoders - modular bus covers Solid shaft with clamping or synchro flange Optical single and multiturn encoders 13 bit ST / 16 bit MT
Features Encoder single- or multiturn / bus cover Optical sensing method Resolution: singleturn 13 bit, multiturn 16 bit Clamping or synchro flange CANopen /DeviceNet/EtherCAT/EtherNet-IP SAEJ1939/PROFINET/POWERLINK/Profibus/SSI
More informationAbsolute encoders multiturn
The Sendix 8 multiturn with patented Intelligent Scan Technology is a particularly high resolution optical multiturn encoder without gears and with 00 percent magnetic insensitivity. bits total resolution,
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - Profibus
Diagnostic LED Cable or M12 connector Output of speed, acceleration Programmable: Resolution, Preset, Direction, Operation time Option: Display "tico" Address via interface parameterizable (optional) hubshaft
More informationAbsolute encoders - bus interfaces
Features Absolute encoder multiturn Optical sensing method Max. resolution: singleturn 18 bit, multiturn 16 bit LED status indicator PROFINET IO Maximum resistant against magnetic fields Optional EAL580
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Safety-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit proof Reverse polarity protection Optical sensor
More informationRotary Position Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection Optical sensor Magnetic field proof Rugged Highest shock resistance on the market:
More informationRotary Measurement Technology Absolute Encoders, Singleturn
-20 to 85 C High rotational speed Temperature Shock/ vibration resistant Short-circuit proof Reverse polarity protection Rugged Highest shock resistance on the market: ( 200 g (2,500 m/s 2 )), 6 ms acc.
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationRotary Position Technology Absolute Encoders, Multiturn
-40 to 80 IP Bearing-ock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Reverse polarity protection Optical sensor Reliable Increased
More informationOptical Absolute Encoder Singleturn or Multiturn with hollow shaft Profibus-DP, CAN, CANopen, DeviceNet GX, G1, G2AMH / GX, G1, G2MMH
TM Optical Absolute Encoder Singleturn or Multiturn with hollow shaft,, open, GX, G1, G2AMH / GX, G1, G2MMH Features Interfaces:,, open, Resolution: 13 bit singleturn, 29 bit multiturn Parameterizable
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - SUCOnet
Compact design SUCOnet or Hengstler-G1-Protocol Parameterizable: preset, direction, scaling factor, resolution PC communication via RS 485 with Hengstler-G1-Protocol Clamping flange TECHNICAL DATA mechanical
More informationAbsolute encoders - modular bus covers
BMMH 58 flexible with blind hollow shaft Features Encoder single- or multiturn / bus cover Robust magnetic sensing Resolution: singleturn bit, multiturn 8 bit Modular fieldbus interfaces CANopen /DeviceNet/EtherCAT/EtherNet-IP
More informationRotary Measuring Technology
--20 40... 60 + C 85 Temperature Shock/vibration resistant Short-circuit proof Reverse polarity protection One type for every situation: Version "flameproof-enclosure": approval zones 1, 2 and 21, 22 Zones
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit =,554,42
More informationEAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI
EAM 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationStandard Modbus. RoHS. High protection level. High shaft load capacity
bsolute encoders Sendix / (shaft / hollow shaft) The Sendix with patented Intelligent Scan Technology is a particularly high resolution optical encoder without gears and with 00 percent magnetic insensitivity.
More informationbidirectionally as well as the rotation sense of shafts. With absolute encoders instead, each incremental
and draw-wire sensors Spot-on and trailblazing technology measure rotation speed, sense, position, angle and length. For this purpose, they convert mechanical motion in electrical signals. There are incremental
More informationTECHNICAL DATASHEET Absolute Encoder AC 58 - CANlayer2
Diagnostic LED Poll and auto mode Programmable: Direction, limit values Option: Display "tico" Clamping flange TECHNICAL DATA mechanical Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft)
More informationProduct Information ECI 1118 EQI 1130 ECI 1119 EQI Absolute Rotary Encoders without Integral Bearing
Product Information ECI EQI 0 ECI 9 EQI Absolute Rotary Encoders without Integral Bearing 0 ECIEQI 00 Absolute rotary encoders Synchro flange 0F) for axial mounting Blind hollow shaft A) Without integral
More informationRotary Position Technology Incremental Encoders
-40 to 85 C IP Bearing-Lock High rotational speed Temperature High IP High shaft load capacity Shock/vibration resistant Magnetic field proof Short-circuit protected Reverse polarity protection Optical
More informationThe pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document.
The pages in this document have been extracted from a larger document and as such any page numbers are relevant only to the original document. Rotary Encoder Solutions Limited Dutton Road Redwither Business
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationMAGNETIC ABSOLUTE MULTITURN
MAGNETI ABSOLUTE MULTITURN ompact Robust Standard Find on page F2 Find on page F15 Find on page F28 ompact, Magnetic Type RM-97/RM-98 Analog F2 Type RM-99/RM-100 SSI F7 Type RM-101/RM-102 ANopen F11 ompact,
More informationComplete Solutions from Specialists. Rotary encoders for geared motors: 5820 M-Line
Rotary encoders for geared motors: 5820 M-Line Complete Solutions from Specialists Stable: Even under the toughest of uses. Versatile mounting options with individual torque arm solutions. Economic: Can
More informationIncremental encoders Solid shaft with clamping or synchro flange pulses per revolution
GI55, GI56 Features Encoder with solid shaft ø mm or ø6 mm Max. 6000 pulses per revolution Optical sensing method Clamping or synchro flange Industrial standard High rotation speed up to 000 rpm Optional
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Optical multiturn encoders 13 bit ST / 12 bit MT, RS485
Optical multiturn encoders 1 bit ST / 12 bit MT, RS485 Features Encoder multiturn / RS485 Optical sensing method Resolution: singleturn 1 bit, multiturn 12 bit Clamping or synchro flange Fieldbus protocol
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Very small housing Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Description This absolute rotary encoder provides
More informationMaterial: Weight: Shaft Loads: Cable: Connector:
Absolute Encoder Type 2RMHF-SSI Absolute Encoder - Ø 24 mm Blind Hollow Shaft - Ø 3 mm to Ø 1/4 inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting
More informationPRELIMINARY EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER ORDERING CODE BIT PARALLEL
EAMH 58 B / C - 63 A / D / E BIT PARALLEL - SSI SOLID SHAFT MULTITURN ABSOLUTE ENCODER MAIN FEATURES Industry standard multiturn absolute encoder for factory automation applications. Optical sensor technology
More informationABSOLUTE ROTARY ENCODER ETHERNET/IP
Main Features - Compact and heavy duty industrial model - Interface: EtherNet/IP - Conformance tested by ODVA - Housing: 58 mm - Full shaft: 6 or 10 mm / hollow shaft15 mm - Resolution: max. 30 Bit = 1,073,741,824
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft: 6 or 10 mm / 15 mm
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or hollow shaft:
More informationMultiturn absolute encoder
Model Number Features Industrial standard housing Ø58 mm 30 Bit multiturn Galvanically isolated CAN interface DSP 406, CLASS 1 and 2 Servo or clamping flange 2 limit switches Description In addition to
More informationABSOLUTE ROTARY ENCODER PROFIBUS-DP
PROCESS FIELD BUS Main Features - Compact and Heavy-Duty Industrial Model - Certified: By Profibus Trade Org., CE - Interface: Profibus-DP - DPV2-Functionality - Housing: 58 mm - Full or Hub Shaft: 6 or
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 480 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft Up to 31 bit overall resolution CANopen interface Free of wear magnetic sampling High resolution and accuracy Highly shock / vibration and soiling resistant Sturdy construction
More informationAbsolute Encoders. SSI & BiSS. CANopen CANlift
Absolute Encoders SSI & BiSS Profibus -DP CANopen CANlift www.turck.com www.turck.com Kübler by TURCK Absolute Encoders Safety-Lock Sendix Absolute with Fieldbus Interface Singleturn, Multiturn - with
More informationIncremental Encoder with Hollow Shaft
Incremental Encoder Type RI 36-H n miniature industry encoder for high number of pulses n short mounting length n easy mounting procedure n Application e.g.: - Motors - Machine tools - Packaging Machines
More informationType EXAG - Profibus. Explosion Proof / Absolute. Ex d - Proof Hollow Shaft Encoder - Ø 78 mm
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Encoder - Ø 78 mm Hollow Bore: Ø 14 mm, Ø 16 mm and Ø 1 inch Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site
More informationAbsolute Rotary Encoder EXAG Explosion Proof. Profibus-DP
PROCESS FIELD BUS Main Features - Approval II 2 G/D EEx d II C T6 - Heavy-duty industrial model - Certified: By Profibus Trade Org., CE - Interface: - DPV2-Functionality - max. 65536 steps per revolution
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with EnDat 2.2 for Safety-Related Applications 10/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationEncoder WDGA 58A CANopen
Encoder WDGA 58A CANopen www.wachendorff-automation.com/wdga58acan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationABSOLUTE ROTARY ENCODER INTERBUS
Main Features - Compact and heavy duty industrial model - Interface: Remote-Bus - ENCOM-Profile: K3 (programmable) - Housing: 58 mm - Shaft: 6 or 10 mm, hollow- 15 mm - Resolution: max. 25 Bit = 33,554,432
More informationTechnical data. General specifications. Linearity error ± 0.1 Functional safety related parameters MTTF d 130 a at 40 C Mission Time (T M ) L 10
Model Number Features Solid shaft 0 Bit multiturn Free of wear magnetic sampling High resolution and accuracy Mechanical compatibility with all major encoders with fieldbus interface Status LEDs Description
More informationEncoder WDGA 58A PROFINET-IO (cov)
Encoder WDGA 58A PROFINET-IO (cov) www.wachendorff-automation.com/wdga58apnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - Profibus Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX,
More informationSERIE 59. Rear clamp. Frontal clamp HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS
HIGH RESOLUTION HOLLOW SHAFT INCREMENTAL ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Hollow shaft from Ø 10 to 14 mm Protection class IP67 according
More informationEXAG - Dual Output Profibus / Incremental
Explosion Proof Profibus / Incremental EXAG Dual Output Profibus / Incremental Electrical Specifications General Ex d Proof Shaft Encoder Shaft: Profibus DPV2 Functionality Absolute Resolution up to 30
More informationType EXME - DeviceNet
Explosion Proof - Mining / Absolute Type EXME - DeviceNet Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm DeviceNet communication protocol Resolution up to 30 bits Removable End Cap for on-site modifications
More informationAbsolute encoder TBD/TRD with PROFIBUS-DP interface
with PROFIBUS-DP interface Document no.: TRD 11868 LE Date: 15.02.2016 Singleturn and multiturn versions Contactless, wear-free sensor system according to the Hall principle High vibration and shock resistance
More informationTECHNICAL DATASHEET Heavy Duty - Absolute Encoder AR 62/63
AR 6 Single and Multi turn: Resolution up to 8 Bit Wearless electronic multi turn: contact -and battery less, self-energetic 300 N axial and radial load 00 g shock resistance/ 0 g vibration resistance
More informationMultiturn absolute encoder
Release date: 207-0-2 :0 Date of issue: 207-0-2 t79_eng.xml Model Number Features Industrial standard housing Ø58 mm PROFINET IRT 0 Bit multiturn Servo or clamping flange Network loop through by means
More informationEncoder WDGA 58E PROFINET-IO (cov)
Encoder WDGA 58E PROFINET-IO (cov) www.wachendorff-automation.com/wdga58epnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationEncoder WDGA 58F PROFINET-IO (cov)
Encoder WDGA 58F PROFINET-IO (cov) www.wachendorff-automation.com/wdga58fpnb Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard
More informationShaft Speed: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - CANopen Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm CANopen communication profile according to DS 301; Programmable according to Class 2 Resolution up to
More informationEncoder WDGA 58B SSI.
Encoder WDGA 58B SSI www.wachendorff-automation.com/wdga58bssi Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer
More informationHMG 11. Features. Optional Additional incremental output (TTL / HTL) HMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn / SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit Blind or through hollow shaft or cone shaft ø16-0 mm Multiturn sensing
More informationRotary Measuring Technology Absolute singleturn encoder shaft version
Highest shock resistance on the market ( 2500 m/s 2, 6 ms acc. to DIN IEC 68-2-27) SSI, parallel or current (4... 20 ma) interface Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 65 Various
More informationProduct Information ECN 1324S EQN 1336S. Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications
Product Information ECN 1324S EQN 1336S Absolute Rotary Encoders with DRIVE-CLiQ Interface for Safety-Related Applications 112015 ECN 1324S, EQN 1336S Rotary encoders for absolute position values with
More informationAMG 11. Features. Optional. Additional incremental output (TTL / HTL) AMG 11. Technical data - mechanical design. Technical data - electrical ratings
Features Multiturn SSI / Profibus / CANopen / DeviceNet / PROFINET Optical sensing method Singleturn 1 bit, multiturn 1 bit / 16 bit EURO-flange B10 / solid shaft ø11 mm Multiturn sensing with microgen
More informationProduct Information ROC 425 ROQ 437. Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications
Product Information ROC 425 ROQ 437 Absolute Rotary Encoders with Solid Shaft for Safety-Related Applications 2/2016 ROC 425, ROQ 437 with synchro flange Rotary encoders for absolute position values with
More informationEncoders Draw wire encoders Magnetic measurement system Limes Connection technology Accessories. Sensor technology Rotary and linear encoders
Encoders Draw wire encoders Magnetic measurement system Limes Connection technology Accessories Sensor technology Rotary and linear encoders Integrated Components Off-the-Shelf Systems Kübler's claim is
More informationAbsolute encoders - bus interfaces Solid shaft with clamping or synchro flange Magnetic single- or multiturn encoders 14 bit ST / 18 bit MT
Features Encoder single- or multiturn / CANopen Precise magnetic sensing Angular accuracy up to ±0.15 Additional incremental signals High protection up to IP 67 High resistance to shock and vibrations
More informationABSOLUTE ROTARY ENCODER MIDI CANOPEN
Main Features - Compact and heavy-duty industrial design - Interface: CANopen / CAN - Housing: 58 mm Ø - Solid / hollow shaft: 6 or 10 mm Ø / 15 mm Ø - Max. 6556 steps per revolution (16 Bit) - Code: Binary
More informationIncremental encoders Solid shaft with EURO flange B pulses per revolution
Solid shaft with EURO flange B 0 5000 pulses per revolution EIL580 - EURO flange B - OptoPulse Features Size ø58 mm Precise optical sensing Output signal level TTL or HTL EURO flange B Connection axial,
More informationShaft: Ø 10 mm and ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Starting Torque: Rotor Mass Moment of Inertia: Shaft Loads:
EXAG Profibus /Shaft EXAG - Profibus Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm and ø 12 mm Profibus DPV2 Functionality Resolution up to 30 bits Removable End Cap for on-site modifications ATEX, IECEx, and
More informationAbsolute encoders - SSI
Features Encoder multiturn / SSI Optical sensing Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics Counting direction input Available
More informationEncoder WDGA 58B CANopen
Encoder WDGA 58B CANopen www.wachendorff-automation.com/wdga58bcan Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationØ 58 mm, depth 48 mm Shaft dimension. Hollow Ø 15 mm, solid Ø 6 or 10 mm Shaft loading (axial and radial)
ABSOLUTE ENCODERS AMT58 SSI Multi-turn Line Standard dimension Ø58mm Hollow or solid shaft Very high resolution Very high accuracy APPLICATIONS -Motion control -Automated machinery -Length measurement
More informationCurrent consumption... Multiturn: max.230ma with 10 V DC,max.100mA with 24 V DC
- Standard encoder 8mm with canopen/can interface - Precision ball bearings with sealing flange - Code disc made of unbreakable and durable plastic - High protection level IP6, IP67 option with a sealing
More informationEncoder WDGA 58E RS485
Encoder WDGA 58E RS485 www.wachendorff-automation.com/wdga58ers485 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationABSOLUTE ROTARY ENCODER SINGLE-TURN BIT PARALLEL
ABSOUTE ROTARY ENCODER Main Features - Compact and Heavy-Duty Industrial Model - Interface: Bit-parallel, Push Pull Short Circuit Proof - Housing: 58 mm - Shaft: 6 or 10 mm, Hub- 15 mm - Resolution: max.
More informationLinear Measurement Technology Draw Wire Mechanics with Encoder or Analog Sensor
High IP protection rating Wide temperature range Shock/vibration resistant Reverse polarity protection Robust Corrosion resistant: Titanium-anodized aluminium housing. High-strength stainless steel draw
More informationECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing. Product Information
Product Information ECI 1319 EQI 1331 EBI 1335 Absolute Rotary Encoders without Integral Bearing Suited for safety-related applications up to SIL 3 when coupled with additional measures 09/2018 ECI 1319,
More informationAccessories. Page 1/
Table of contents Page Programming software Ezturn 302 SSI-Display Type 570 303 Multifunction display Type 571 304 Fixing components for encoders Flange adapters, square, round, angle 305 Fastening eccentrics
More informationProduct Information. ECN 1023 EQN 1035 Rotary Encoders with EnDat 2.2 for Safety-Related Applications
Product Information ECN 1023 EQN 1035 Rotary Encoders with EnDat 2.2 for Safety-Related Applications January 2009 ECN 1023/EQN 1035 Series Rotary encoders for safety-related applications With integral
More informationW Economic: Can be installed quickly and efficiently. W Compact and versatile: Top technology for limited
Incremental and Absolute Encoders especially for Drive Technology RoHS 2/22 Complete Solutions for geared motors W Sturdy: Withstands even the toughest conditions. W Economic: Can be installed quickly
More informationShaft: Ø 10 mm or Ø 12 mm. Material: Weight: Bearing Life: Shaft Speed: Shaft Loads: Shock: Vibration: Bump:
Explosion Proof / Absolute Type EXAG - SSI Ex d - Proof Shaft Encoder - Ø 78 mm Shaft: Ø 10 mm or Ø 12 mm Synchronous Serial Interface (SSI) (RS422/TTL) Resolution up to 30 bits Removable End Cap for on-site
More informationDelivery. Connection. C. AA+BB Helicoidal cable 2. Radial M12 8p CCW. 3. Radial M23 12p CCW
PROGRAMMABLE INCREMENTAL HOLLOW SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Programmable incremental optical encoder from 1 to 65.536 pulses per rotation Programmable via USB, without an additional programming
More informationSolutions for Linear Measurement
Solutions for Linear Measurement Magnetic Linear Measurement Systems LIMES Draw ire Sensors from Mini to Maxi Measuring heels, Length Measurement Kits Clearwater Tech - Phone: 800.894.0412 - Fax: 208.368.0415
More informationDATASHEET ABSOLUTE MAGNETIC ROTARY ENCODER CANOPEN
Robust rotary sensor based on reliable magnetic technology. Stainless steel housing capable to withstand extreme environmental conditions. Ideal suited for outdoor applications. Sturdy ball bearings for
More informationEncoder WDGA 58A RS485
Encoder WDGA 58A RS485 www.wachendorff-automation.com/wdga58ars485 Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and
More informationAbsolute multiturn encoder TRK/S3 with EtherCAT FSoE interface
Absolute multiturn encoder TRK/S3 with EtherCAT FSoE interface Document no.: TRK 13348 BE Date: 13.11.2015 Contactless, wear-free sensor system according to the Hall principle High vibration and shock
More information