EASY touring searchlight provides the user with the following features: full electronic dimming of the lamp, patented electronic high speed strobe (up to 25 Hz), and precise positioning. Stepper motors with microstepping are used for every movement including Pan & Tilt. The built-in power supply automatically switches itself to the mains supply voltage and incorporates a soft start technique for the lamp ignition. EASY touring system allows free 512 channels assignment and possibility to exclude the functions you do not need to use. The "on-board" computer is fitted on the fixture base. "On-board" computer works as a built-in pogrammable control desk, with the possibility of creating lighting scenarios as follows: - changing the sequence of the factory preset channels assignment - choosing different scenes for lighting shows (up to 10.000 programmable scenes)
ON BOARD COMPUTER FUNCTIONS Input Outpt ON BOARD COMPUTER DISPLAY space cannon ELECTRONIC ENGINEERING C MENU E Button CLEAR adress C E REMOTE CONTROL The ON BOARD computer is composed by an 8 digital alphanumeric display and a 6 keys soft touch keyboard: Button UP Button MENU MENU adress Button DOWN Button ENTER Button Address MENU PAGE BUTTON SHOW SHOW number Address button SEQ. ADDR AUTO TYPE END SHOW CLOCK FTR SETUP MONDAY PROG. SUNDAY PROG. LAMP CNT LAMP STR FTR VAL a: Clock b: Photo-cell c: Manual Switching OFF Show number a: Day (number) b: Day (1=Monday; 2=Tuesday, etc.) c: Month d: Year e: Hour f: Minute a: Start (not used) b: Stop (not used) a: STOP hour b: STOP minute c: START hour d: START minute e: SHOW number a: STOP hour b: STOP minute c: START hour d: START minute e: SHOW number Time counter Strike counter Photocell (not used) SNGL. ADDR To assign a channel to each function of the unit, use the button UP & DOWN Button UP Button DOWN To confirm the assignment press the Enter button: E ENTER button NOTICE: SEQ ADDRESS allow to assign channels by only specifying the first one, all remai ning channels will automatically be upgraded; SNGL ADDRESS allow to assign channels by specifying every single one To exit the programming press the MENU button. To clear the value (value = 0) press the CLEAR button. SOFT TOUCH KEYBOARD: MENU/SHOW SELECT/SNUM= 0 MENU/SHOW SELECT/SNUM= 1-8, 11-512 off MENU/SHOW SELECT/SNUM= 9 focusing operation positioning MENU/SHOW SELECT/SNUM= 10 ADDRESS - allows to select channels C: Clear - E: Enter - Arrows Keys: Up and Down FUNCTION: The movement is controlled with value set on channels: MENU/SHOW SELECT/SNUM=0 FACTORY PRESET SHOWS: EASY fixture will run stand-alone with the following demo shows by selecting the following functions: Show n. 1-8: OFF/PARKING Show n. 9: FOCUSING operation positioning show n. 10: DEMO - TEST Show n. 11-512: OFF PARKING AUOPARK OF THE FIXTURE: The channel LAMP ON/OFF acts on the fixture as follows: 0-25 %: PARK Position, all the commands are ignored 35-65 %: OFF, allthe commands are accepted with the fixture OFF. 75-100 %: ON. EASY is projected to meet the standard international requirements:
Move the Motor n 3 Move the Motor n 2 FOCUSING SYSTEM The focusing adjustment is made by a Soft-Touch keyboard, by which you can move the lamp inside the reflector and vary the beam angle from SPOT to FLOOD. The searchlight power output depends not only on the lighting beam illuminotechnic features but also on other parameters, such as intensity and beam shape, atmospheric trasparence, dimensions, shape and colour of the lit object, background luminance, observer s distance from the beam axis. Move the Motor n 1 Parabolic mirror Lamp Adjusting axis and Motor n 2 Move all the Motor Adjusting axis and Motor n 3 Adjusting axis and Motor n 1 Lamp focusing soft-touch keyboard CHANNEL IREOS PRO control is allowed through the standard 512 USITT 90 protocol: MANUALLY by an external standard control desk; STAND ALONE throught the load of one of the show present in the on board loading computer fitted on each unit (no need of cables); SERIES OF TWO OR MORE by the Space Composer external control desk. The order of the channels show by the list can be modified in any moment, according to the special needs of the customer, by the on-board computer. EASY TOURING Channel Assignment (factory made) Channel Function Channel 1 Channel 2 Channel 3 Channel 4 Channel 5 Channel 6 Channel 7 Channel 8 Channel 9 Channel 10 Channel 11 PAN (8 HI bit) PAN HR (8 LOW bit) TILT (8 HI bit) TILT HR (8 LOW bit) OFF - PARKING - ON DIMMER STROBE SYNCHRO DELAY ZOOM RESET (15 sec.) level 0-350 +0 +0,7 over Pan 0-250 +0 +0,5 over Tilt 0-50 % - 100 % 0-100 % (10% - 100% dimm.) Power regulation 0% Steady light (80 Hz) Flash effect 1-100% (0,5-25 Hz) (strobe value) (strobe value) 0-100 % (angle of beam 0.2-30 ) 100% Reset all channel every 15 sec.
EASY TOURING 2000 TECHNICAL SPECIFICATIONS BODY ENCLOSURE: Reinforced non corrosive aluminium composite shell Shock resistant ABS chassis Easy access to the lamp holder Convection forced cooling Working and mounting position: any Meets standard CE, UL and CSA safety standards for professional fixtures LAMP: 2000W OSRAM - XBO SHSC OFR Power: 2000 Watt Voltage: 28V - 70A Luminous flux: 80.000 lumen Colour temperature: 6500/7000 K Rated lifetime: 1500 hours Burning position: ±20 PARABOLIC REFLECTOR: Quartz reflector Diameter: 240 mm Zoom system with built in stepping motor for the dynamic control of the beam spread. OPTICS: Cover Glass: Quartz Boron silicate flat lens Stainless steel optical mask to exclude light halos on the beam shape. CONTROL: 512 USITT 90 standard protocol input/output for the unit running with an external control desk. Built-in MICROPROCESSOR board for the whole units STAND ALONE functions control, without an external control desk Synchronized working with two or more units WITHOUT cables. Built-in demo shows for the stand alone running of one or more units (custom lighting scenarios can be provided under request). Built-in timer for daily, weekly and monthly programming allow the units running without the presence of the operator. FUNCTIONS: PAN, PAN High Resolution, TILT, TILT High Resolution, Lamp On/Off, Electronic Dimmer, Strobe/Synchro/Delay, Zoom, Reset. DIMMER Electronic Dimmer controlled by value. PAN & TILT MOVEMENT: Stepper bipolar Motor: 7V - 0,7A Step Angle 1,8 Angle of PAN: 350 - Resolution: 0,14 ± 0,003 accuracy. Speed Max: 120 Arc for second. Angle of TILT: 250 - Resolution: 0,1 ± 0.003 accuracy. Speed Max: 90 Arc for second. POWER SUPPLY: Electronic switching power supply (patented) 220 V Single Phase - 190/260 V AC with Power Factor Correction Flickering free BEAM CONTROL: Built-in motorized zoom system for the quick variable shaping of the beam of light. Variable photometrics with spread output beam angle from 0,2 up to 30. MICROPROCESSOR SOFTWARE: Soft touch keyboard for the built-in firmware control SCENE DESIGNER : Space Cannon vh software project development for the lighting scenarios program. SCENE DESIGNER is a trade mark by SPACE CANNON vh S.r.l. UNIT DIMENSIONS: A = 785 mm - B = 475 mm - C = 1150 mm NET WEIGHT: 46 kg approximately, depending on configuration GROSS WEIGHT: 53 kg approximately OPERATING TEMPERATURE: -30 C / +55 C B A C ALL SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE space cannon ELECTRONIC ENGINEERING Strada per Felizzano, 14-15043 FUBINE (AL) - ITALY Tel + 39 0131 772288-772538 - 791269 - Fax + 39 0131 772292 Internet: www.spacecannon.it - E-mail: info@spacecannonvh.com