ccessories hapter In this hapter... ccessories...- -more Micro Programming Software...- E-EOM Ethernet ommunication Module...- -SU -pin 0-degree ommunication Port dapter...- -SU -pin to Terminal lock dapters...- lear Screen Overlay...- UL R US
hapter - ccessories ccessories Part Number E-MG-PGMSW US-L- US-L-MI Part Number E-EOM E-PTR- E-OMON- E-OMON- E-MG-OV-L E--OV E--OV E--OV E--OV -more Micro Programming Software & Programming ables escription -more Micro Windows-based programming software,. For use with -more Micro panels. Requires US port connection from P to -more Micro panel. ables sold separately. ownloadable version available from the Web site at no charge. Standard US.0 cable with Standard- plug to Standard- plug, suitable for all US devices. ft. (. m) cable shown as example. Maximum cable length is ft (. m). Programming cable, US to micro- US, ft cable length. For use with and -inch panels. NOTE: dding optional E-EOM module allows programming via an Ethernet connection via a ate cable. -more Micro Panel ccessories escription -more Micro communication expansion module, () RJ /0 Mbps Ethernet port. For use with E series in, in and in HMIs. For programming and PL communications. SU port adapter, -pin male to -pin female, right angle cable entry. For use with -more Micro E series in and in HMIs, -more Micro E series in, in, and in HMIs, -more E in and in HMIs. RS-/ terminal block, right angle cable entry. For use with -more Micro E series in and in HMIs, -more Micro E series in, in, and in HMIs, -more E in and in HMIs. SU port adapter, -pin male to -pole RS-/ terminal block, straight cable entry. For use with -more Micro E series in with E-MG-SP, -more Micro E series in and in HMIs, -more E in, in, in and in HMIs. Optional clear screen overlay used to protect -more -inch Micro displays from minor scratches and wear. Package contains three clear screen overlays. Optional clear screen overlay used to protect -more -inch Micro displays from minor scratches and wear. Package contains three clear screen overlays. Optional clear screen overlay used to protect -more -inch Micro displays from minor scratches and wear. Package contains three clear screen overlays. Optional clear screen overlay used to protect -more -inch Micro displays from minor scratches and wear. Package contains three clear screen overlays. Optional clear screen overlay used to protect -more -inch Micro displays from minor scratches and wear. Package contains three clear screen overlays. - E-USER-M Hardware User Manual, nd Ed. Rev.
hapter - ccessories -more Micro Programming Software -more Micro Programming Software is a spin-off of its powerful sibling -more Touch Panel programming software. It offers very high end features designed to reduce your configuration time. Simply drag and drop the objects from the object bar (right side of screen) onto the the screen construction area. Then configure your PL tags and click on the objects you wish to use. Use the built-in simulator to review your work on your P before ever downloading your project! Thumbnail project preview pane Helps keep track of multi-screen projects. uilt-in user object/screen libraries Save time by re-using your custom objects and screens. Scrolling object selection window Lets you find the object you want fast. Just drag and drop it on the screen. Scrolling help window Gives you helpful information on each object uilt-in project simulator Runs your project on your P Test all of your screens before downloading Time savings pays for the panel P Requirements: Following are the minimum system requirements for running -more Micro Programming Software, E-MG-PGMSW, on a P: Operating System - Windows ( and bit), Windows ( and bit); Windows. ( and bit), Windows M free hard-disk space -ROM or V drive for installing software from the, or internet access to download free programming software US port or Ethernet port if using optional E-EOM for project transfer from software to touch panel E-USER-M Hardware User Manual, nd Ed. Rev. -
hapter - ccessories -more Micro Programming Software (cont d) -more Micro Panel Objects Object Graphic Object Graphic Shape objects, just like with drawing tools, allow the user to insert shapes, such as a straight line, circle, or rectangle drawing into a project. When a Shape is inserted into a project, a window opens to allow the user to setup all available parameters for the Line object. Some of the uses for Shape Objects include but are not limited to adding callouts, pointers, or indicators. The Frame object allows the user to insert a Frame to the project that can be used to Frame other objects. Some of the uses for Frame object include but are not limited to graphically separating objects for different operations that may appear on one screen and emphasizing pushbuttons or other objects that may require more attention by the operator. The Pushbutton object is available from the utton ategory of the Object List window. The Pushbutton object is an electronic version of a typical Pushbutton normally found on control panels. The Pushbutton object can be used to activate or deactivate components assigned to a iscrete Tag Name. The Switch object is an electronic version of a typical Switch that normally can be found on control panels. The Switch object can be used to activate or deactivate components assigned to a iscrete Tag Name. The Radio utton object is an electronic version of a set of buttons that have a similar appearance to the classic radio tuning buttons. The Radio utton allows a minumum of two buttons and a maximum of eight buttons. The operation of Radio uttons only allows one button to be On at a time. The Indicator utton object is available from the utton ategory of the Object List window. The Indicator utton object is an electronic version of a typical Indicator utton normally found on control panels. The Indicator utton is a combination of a Pushbutton and an Indicator Light. The Indicator utton can be used to activate or deactivate components assigned to a iscrete Tag Name. The Tri-State Switch Object consists of a set of three Pushbuttons that allow to configure the first button to the left as a Reset that turns the other two buttons Off, and configure the other two buttons with individual iscrete Tag Names. The Indicator Light object is an electronic version of a typical Indicator Light normally found on industrial control panels. The Indicator Light can be configured to display the status of the assigned iscrete Tag Name. The Graphic Indicator Light object is a more enhanced version of the Indicator Light Object that allows the user to choose more detailed graphics to display the status of a tag. This object is an electronic version of a typical Indicator Light normally found on industrial control panels. The Indicator Light can be configured to display the status of the assigned iscrete Tag Name. The Numeric isplay consists of a frame that displays a real-time numeric value according to the value of data received from an assigned Tag Name. The Numeric isplay supports numeric Signed ecimal, Unsigned ecimal,, and Floating Point data types with up to digits, including decimal point. User efined lpha Numeric Prefix and Suffix values are also supported. -more Micro Panel Objects continued at top of next page. The Numeric Entry object is used to enter a value from your Panel to a PL Register. This object, when selected, opens a Numeric Keypad that allows the user to enter a new value that will be written to the assigned Tag Name. The Numeric Entry supports numeric Signed ecimal, Unsigned ecimal,, and Floating Point data types with up to digits, including decimal points. User efined lpha Numeric Prefix and Suffix values are also supported. The Increment/ecrement Value object is used to add or subtract a value by pressing a button on the Panel. asically the object uses two Tags, one to read a value from and another to write a modified value to. The Increment/ecrement Value supports numeric Signed ecimal, Unsigned ecimal,, and Floating Point data types with up to digits, including decimal points. The Increment and decrement values are also user selectable. The Real Time Graph object displays the value stored in up to eight PL tags, over a history of up to points each. One point is added at each refresh. The Line Graph object displays the values of up to PL address points. Up to eight address arrays can be displayed. The line is drawn in its entirety at each refresh. The nalog Meter object is used to display the current value of a Tag Name. The ar Graph object is used to monitor up to two assigned Tag Names continuously. This object has various appearances depending upon the relative value of the tags. The ar Graph can be used to create digital versions of level, current, and flow meters to name a few samples, or gauges that measure speed and other measurable data. The itmap utton object offers the ability to use a itmap graphic to perform the functions of a utton. This allows users to create their own graphics and implement them within the software project. The itmap utton object can be used to activate or deactivate components assigned to a iscrete Tag Name. The Static itmap offers the ability to display a itmap graphic on any screen. The Static itmap does not change state. Refer to the ynamic itmap Object if you require the graphic object to change state based on a Tag Value in your PL. The dialog box for a Static itmap object allows you to read from disk and select a graphic file for import. Graphics must be in one of the following formats:.mp.wmf.jpg.jpeg The ynamic itmap object offers the ability to make an object using two different itmap graphics that will display one graphic when the Tag is On and a different graphic when the Tag is Off. Use your own bitmap designs or use some of the bitmaps provided with the software that are located in the User Graphic Library. The Multi-State itmap (version.0 and later) displays one of up to images based on the status of a tag value assigned to each image. It can be used to create animation. - E-USER-M Hardware User Manual, nd Ed. Rev.
hapter - ccessories -more Micro Programming Software (cont d) -more Micro Panel Objects Object Graphic Object Graphic Recipe objects make it easy to make a large number of tag changes with the push of a single button. reate Recipes with up to entries, and multiple sets of values. Then just push a button to load an entire set of values into the group of recipe tags. The Static Text object is used to display a Frame with a personalized Message. This Frame and Message can be placed on any screen and any location within the screen. The Lookup Text object is used to display a Frame with a personalized Message. This Frame and Message can be placed on any screen and any location within the screen. The object is always displayed like a sign but is configured to display only the message prompted by an assigned Tag Name. Messages are retrieved from a Message atabase which is configured by the user with text defined by the user. The Lookup Text Object will scroll text up to characters. The ynamic Text object is used to display text that is retrieved from data stored in a Tag. The Tag Name is assigned to registers in the PL that contain set character data. The data can be stored in the PL in SII format and may include information such as machine numbers, locations, part numbers, and such. The Message can be configured to be visible (Trigger) when an associated Tag Name is On or Off. This object can be placed on any screen and any location within the screen. The ynamic Text Object will scroll text up to 0 characters. The Scroll Text object is available from the Text ategory of the Object List window. The Scroll Text object is an electronic version of a marquee. It is similar to the Static Text Object. If the text in the object does not fit in the window, it will scroll from right to left across the window. The Scroll Text object does not require a Tag Name assignment. The Scroll Text Object has a maximum character limit of characters. The Text Entry object is used to enter an SII string. Two entry options allow use of an on-screen keypad or the hardware function keys to enter characters. The Screen hange Pushbutton object is available from the ontrol ategory of the Object List window. The Screen hange Pushbutton object is a pushbutton that can be configured to activate another screen in the project. This object may be edited to various colors and sizes. Users can configure the button to activate the Power-Up screen, Forward Screen, Previous Screen, or any one of the project screens. The Screen Selector object is available from the ontrol ategory of the Object List window. This object is an enhanced version of the Screen hange pushbutton in that it offers many more features and defaults with data from screens in the project. This helps to save time by not having to create Screen change buttons for each screen. This object may be edited to various colors and sizes. The djust ontrast object is used to allow the operator to adjust the Panel isplay ontrast. The default isplay setting often works in most applications, however lighting may vary based on the location of each application. In these cases the operator can use this object to make adjustments. The current display setting value will appear on the top of the button and will change as the arrow keys are pressed. This button can be modified to various sizes. The Function object is used to assign the panels function key buttons to a particular action as well as assigning the control of the LE On/Off status. When a button has been assigned as a shift button, the then F through F will become F through F. The Function Object buttons will activate when the hardware button is pressed or when the object is pressed on the screen. The object size is restricted so that the keys will line up with the hardware function keys on the panel. E-USER-M Hardware User Manual, nd Ed. Rev. -
hapter - ccessories E-EOM Ethernet ommunication Module The E-EOM Ethernet ommunication module plugs into the expansion port on the rear of the E series,, and -inch -more Micro panels to allow Ethernet communications for programming and PL communications at a speed of /0 Mbps. E-EOM imensions: Inches [mm] Link Status LE (Green) On Ethernet Linked Off No Ethernet omm. linking Green omm. ctivity PL rivers utomationirect Productivity Series Ethernet utomationirect o-more / RX Ethernet utomationirect LIK Ethernet utomationirect EOM Ethernet Modbus TP/IP E-EOM Specifications Part Number E-EOM Operating Temperature 0 to 0 ( to F) Maximum surrounding air temperature rating: 0 Storage Temperature 0 to +0 ( to + F) Humidity % RH (non-condensing) Environmental ir For use in pollution degree environment Vibration IE00-- (Test Fc), - Hz:. mm amplitude, - Hz:.0G, sweeping, at a rate of octave/min. (±%), sweep cycles per axis on each of mutually perpendicular axes Shock IE00-- (Test Ea), G peak, ms duration, three shocks in each direction per axis, on mutually perpendicular axes (total of shocks) Noise Immunity NEM IS-0 RFI, ( MHz, 0 MHz W @ cm) Impulse 00 V @ µs pulse Emission EN0 lass (Radiated RF emission) NEM 0 type /X indoor use only Enclosure UL0 type X indoor use only (panel door installation) IP- indoor use only (When mounted correctly) gency pprovals E (EN-), UL0, UL anadian. To obtain the most current agency approval information, see the gency pproval hecklist section on the specific part number s web page Mounting Torque 0 oz in [0. N m] Weight 0. lb [g] Ethernet Specification onforms to IEEE0. ommunication Speed /0 ase-t (utomatic Negotiation) able Specification ategory uto MI / MI-X Yes onnector Type RJ - E-USER-M Hardware User Manual, nd Ed. Rev.
KOYO ELETRONIS INUSTRIES O., LT. hapter - ccessories -SU -pin 0-degree ommunication Port dapter The E-PTR- adapter plugs into the -pin serial port on the rear of the -more Micro panel to allow a PL communication cable to be plugged in at a 0 degree angle to reduce panel depth requirements. -pin straight through pin-out. UL Recognized. E-PTR- imensions: Inches [mm].0 [0.]. [.] 0. [0.] ate code ountry of Origin E-PTR- IOIOI PL NOTE: ue to comm port orientation E-PTR cannot be used with E-TL and E-TL. E-USER-M Hardware User Manual, nd Ed. Rev. -
KOYO ELETRONIS INUSTRIES O., LT. hapter - ccessories -SU -pin to Terminal lock dapters E-OMON- and E-OMON- adapters plug into the -pin serial port on the rear of the -more Micro panel to allow wire terminal connections for an RS-/RS-/ H- PL communication cable. E-OMON-. [.]. [.] imensions: Inches [mm]. [.] ate code ountry of Origin E-OMON- GN S S+ R R+ TERM Terminals GN S S+ R R+ TERM NOTE: ue to comm port orientation E-OMON- cannot be used with E-TL and E-TL. E-OMON- 0. [.] 0.0 [.].0 [.] imensions: Inches [mm].0 [.] Terminals GN S S+ R R+ TERM - E-USER-M Hardware User Manual, nd Ed. Rev.
hapter - ccessories lear Screen Overlay Optional clear screen overlays are used to protect -more Micro displays from minor scratches and wear. Package contains three clear screen overlays. Units: Inches [mm] lear Screen Overlay Installation Step Remove the overlay from the package Step lign the overlay with the screen and press the adhesive firmly into place 0. [.0] 0. [.0] Part imensions - inch [mm] Number E-MG-OV-L.. [.] [.] E--OV. [.] E--OV. [.] E--OV. [.] E--OV. [.] Step Remove the paper backing from the overlay Remove the protective film* Step. [.0].0 [.]. [.]. [.0] *NOTE: The protective cover ships with a thin protective sheet on the face of the cover that needs to be carefully removed. If your panel is not clear, the protective sheet may not have been removed. E-USER-M Hardware User Manual, nd Ed. Rev. -