Client Project name Order# Type Qty FEATURES AND BENEFITS Physical : Low copper content extruded aluminum housing Available in, 2, 3 or 4 sections Electro-statically applied polyester powder coat finish Machined aluminum end caps and silicone gaskets Stainless steel hardware Clear tempered glass Asymmetric wallwash, x, x 6, 3 x 6 or 6 x 6 optics IP66 IK07 rated (asymmetric wallwash lens is IK06 rated) Corrosion-resistant coating for hostile environments** Meets 3G ANSI C36.3 Vibration standard for bridge applications Performance : Minimum fc (0.7 lux) @ 02 feet (3.m) distance (RGB full white, 4 unit, x 6 optic) 2,04 delivered lumens and 0,45 candelas at nadir (RGB full white, 4 unit, x 6 optic) Color mixing options: RGB (3 channels) or RGBW (4 channels) Lumen maintenance L70 @ 25 C - 20,000 hrs Lumen measurements comply with LM - 79-08 standard Resolution per foot or per fixture (configured with LumenID V3 software & RDM) Operating temperatures: -25 C to 5 C [-3F to 22F] Electrical : Line voltage luminaire for 00 to 277V Power and data in cable (#6-5) Up to 2 feet with power & data feed (277V) 7.25W/ft DMX/RDM enabled CERTIFICADO No.05884, 05885 RETILAP IK07* 3 3 [340mm] " 4 [7mm] Minimum spacing 25 3,37 3, 49 3 [645mm, 949mm, 254mm] 2 5 6 " [59mm] 3 2 " [89mm] ft fixture FRONT VIEW 2" [5mm] 4" [02mm] 2ft, 3ft and 4ft fixtures SIDE VIEW *Asymmetric wallwash lens is IK06 rated. ** Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure! /7
ASYMMETRIC WALLWASH OPTIC FEEDING SIDE DETAIL Wall side Wall side INPUT WWLF Asymmetric Wallwash Optic, Left Feed INPUT WWRF Asymmetric Wallwash Optic, Right Feed Always position frosted side toward the wall *Fixture s feeding side is based on uplight installations. Feeding sides are reversed when fixture is used in a downlight application. Recommended setback from wall is /0 of the wall height. Example: 2ft setback for a 20ft wall. FRONT VIEW RIGHT SIDE VIEW (Fixture pointing upwards) 2/7
MOUNTING OPTIONS Surface Mount SAM Slim Adjustable Mounting UMP Fixed Mounting [3mm] 3 R [4mm] 3 4 " [83mm] 3 2 3 6 " [7mm] SAM Wall Mount UMAS Universal Adjustable Mounting 9 3/4 [9mm] 3 /2 [89mm] 3/6 [5mm] 8 2 7/8 [73mm] 6 WAM2 Adjustable Wall Mounting 2" 2X 9/32 THRU ALL UMP -6 WAM6 Adjustable Extended Arm Mounting 6" 5 3/4 [9mm] 2 /2 [64mm] -5 3/4 [45mm] 5 2X 9/32 THRU ALL WAM2 Adjustable Extended Arm Mounting 2" UMAS -5 5 /6 [27mm] WAM8 Adjustable Extended Arm Mounting 8" 2 /2 [64mm] -5 2X /4 THRU ALL 3/4 [45mm] 0 3 7 3 4 4 " [35mm][08mm][87mm] 3 3 9 3 [340mm] [492mm] WAM 3/7
OPTION ETE - End-to-end configuration, no jumper cable needed. 6 cable included at input. top view Minimum coil dimension 4 " 2 [5mm] ACCESSORIES Order separately Control Systems: Control Boxes: LTO2 LCU LID LTN CBX Lumentouch is a wall mount DMX 52 controller keypad. Lumencue is a USB / mini SD DMX 52 controller. LumenID is a diagnostic and addressing DMX 52 controller. It must be specifi ed on all DMX applications. Refer to LID specifi cation sheet for details. Lumentone is a simple pre-programmed DMX 52 controller with a push button rotary dial and live feedback. DMX/RDM control box. Up to six power and data outputs to fi xtures or fi xture runs. Ethernet enabled option. Refer to CBX specifi cation sheet for details. Leader Cable : LOGLCD LOGLCD -ETE Leader Cable for Lumenfacade. Please add desired cable length : 0, 25 or 50 [3m, 7.6m or 5.2m] standard lengths Sealing endcap is mandatory for any unused connector. () included with every leader cable Leader Cable for Lumenfacade, ETE option. Please add desired cable length : 0, 25 or 50 [3m, 7.6m or 5.2m] standard lengths Sealing endcap is mandatory for any unused connector. () included with every leader cable Jumper Cable : LOGJCD LOGJCD -ETE Jumper Cable for Lumenfacade. Please add desired cable length : 2 or 4 [0.6m,.2m] standard lengths Jumper Cable for Lumenfacade, ETE option. Please add desired cable length : 2 or 4 [0.6m,.2m] standard lengths 4/7
RESOLUTION DETAILS Fixture resolution can be configured on-site within the LumenID V3 software. A DMX/RDM enabled CBX is required. Resolution per foot: each foot is addressed independently DMX ADDRESSES:,2,3 4,5,6 7,8,9 (color 3) 0,,2 (color 4) 3,4,5 (color 5) 6,7,8 (color 6) 9,20,2 (color 7) 22,23,24 (color 8),2,3,4 5,6,7,8 9,0,,2 (color 3) 3,4,5,6 (color 4) 7,8,9,20 (color 5) 2,22,23,24 (color 6) 25,26,27,28 (color 7) 29,30,3,32 (color 8) Resolution per fixture: each fixture is addressed independently DMX ADDRESSES:,2,3 4,5,6,2,3,4 5,6,7,8 5/7
TYPICAL WIRING DIAGRAMS Star Layout (DMX/RDM) American Color Code CE Color Code USE Green Yellow/Green Ground Black Brown Live 00-277V White Blue Neutral Red/Purple Black 0-0V / Data + Orange Grey 0-0V / Data - Jumper cable end-to-end #6-5 Leader cable #6-5 00-277V Data input CBX-ST Data input Lumentouch 2.0 Maximum run length by 5A circuit Cable length/voltage 20V 240V 277V 0ft leader cable 78ft 00ft 2ft 00-240V 50ft leader cable 68ft 80ft 88ft *Up to 70 individually addressable foot sections per RGB DMX/RDM run. *Up to 28 individually addressable foot sections per RGBW DMX/RDM run. *Maximum run length calculations are typically based on 4ft fixtures. Consult factory for specific installation requirements. Daisy Chain Layout (DMX/RDM) Sealing end cap Lumentouch 2.0 Jumper cable #6-5 Sealing end cap Jumper cable end-to-end #6-5 Jumper cable #6-5 Leader cable #6-5 CBX-DS 00-277V Data input 00-240V Jumper cable #6-5 CBX-DS Leader cable #6-5 00-277V Data input 6/7
HOW TO ORDER LOG DMX/RDM 2 3 4 5 6 7 8 9 6 Housing: Mounting Option: 2 3 4 5 LOG - Lumenfacade Voltage: 00-00 volts 20-20 volts 208-208 volts 220-220 volts 240-240 volts 277-277 volts Length: 2-3 3/8 inches (340mm) (2 kg/4.5 lbs) 24-25 3/8 inches (645mm) (3.7 kg/7 lbs) 36-37 3/8 inches (949mm) (4.75 kg/0.5 lbs) 48-49 3/8 inches (254mm) (6.35 kg/4 lbs) Colors and Color temperatures: RGB - Additive red, green and blue RGBW - Additive red, green, blue and white 4000K 7 8 SAM - Slim Adjustable Mounting UMP - Fixed Mounting (Suitable to use when 3GV option is specified) UMAS - Universal Adjustable Mounting (Suitable to use when 3GV option is specified) WAM2 - Adjustable Wall Mounting 2 WAM6 - Adjustable Extended Arm Mounting 6 WAM2 - Adjustable Extended Arm Mounting 2 WAM8 - Adjustable Extended Arm Mounting 8 Finish: SI - Silver SandText BK - Black SandText WH - White CC - Custom (please specify RAL color) Control: DMX/RDM - DMX/RDM enabled Fixtures come pre-addressed by fixture (consult Resolution Details page for the number of DMX addresses per color mixing option). Optics: 9 WWLF - Asymmetric Wallwash optic, left feed* WWRF - Asymmetric Wallwash optic, right feed* 0x0 - x ** 0x60 - x 6 30x60-3 x 6 60x60-6 x 6 *Available September 205. Right feeding side is standard unless otherwise specified. **For best results, we recommend a 6-inch (5cm) setback from surface. Contact factory for application support. Option: ETE - End - to - end configuration, no jumper cable needed CRC - Corrosion-resistant coating for hostile environments 3GV - 3G ANSI C36.3 Vibration Rating N.B. Available with UMP and UMAS mounting options only. 7/7