5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon oxide passivated junctions. All this in an axial lead, transfer molded plastic package that offers protection in all common environmental conditions. Features Zener Voltage Range 3.3 V to 200 V ESD Rating of Class 3 (>6 kv) per Human Body Model Surge Rating of up to 80 W @ 8.3 ms Maximum Limits Guaranteed on up to Six Electrical Parameters Pb Free Packages are Available* Mechanical Characteristics CASE: Void free, transfer molded, thermosetting plastic FINISH: All external surfaces are corrosion resistant and leads are readily solderable MAXIMUM LEAD TEMPERATURE FOR SOLDERING PURPOSES: 260 C, /6 in. from the case for seconds POLARITY: Cathode indicated by polarity band MOUNTING POSITION: Any MAXIMUM RATINGS Rating Symbol Value Unit Max. Steady State Power Dissipation @ T L = 25 C, Lead Length = 3/8 in Derate above 25 C Junction to Lead Thermal Resistance Operating and Storage Temperature Range P D JL 5 40 25 T J, T stg 65 to +200 (Note ) W mw/ C C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.. Max operating temperature for DC conditions is 50 C, but not to exceed 200 C for pulsed conditions with low duty cycle or non repetitive. C Cathode http://onsemi.com Anode AXIAL LEAD CASE 07AA PLASTIC MARKING DIAGRAM A N 53xxB YYWW A = Assembly Location N53xxB = Device Number (Refer to Tables on Pages 3 & 4) YY = Year WW = Work Week = Pb Free Package (Note: Microdot may be in either location) Device Package Shipping N53xxB, G N53xxBRL, G ORDERING INFORMATION Axial Lead (Pb Free) Axial Lead (Pb Free) 00 Units/Box 4000/Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD80/D. *For additional information on our Pb Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. November, 203 Rev. 5 Publication Order Number: N5333B/D
ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted, V F =.2 V Max @ I F =.0 A for all types) Symbol Parameter I F I V Z Reverse Zener Voltage @ I ZT I ZT Reverse Current Z ZT I ZK Z ZK Maximum Zener Impedance @ I ZT Reverse Current Maximum Zener Impedance @ I ZK V R V Z I R I ZT V F V I R Reverse Leakage Current @ V R V R Breakdown Voltage I F Forward Current V F Forward Voltage @ I F I R Maximum Surge Current @ T A = 25 C V Z Reverse Zener Voltage Change I ZM Maximum DC Zener Current Zener Voltage Regulator ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted, V F =.2 V Max @ I F =.0 A for all types) Device (Note 2) Device Marking Zener Voltage (Note 3) Zener Impedance (Note 3) Leakage Current V Z (Volts) @ I ZT Z ZT @ I ZT Z ZK @ I ZK I ZK I R @ V R I R (Note 4) V Z (Note 5) I ZM (Note 6) Min Nom Max ma ma A Max Volts A Volts ma N5333B N5333B 3.4 3.3 3.47 380 3 400 300 20 0.85 440 N5334B N5334B 3.42 3.6 3.78 350 2.5 500 50 8.7 0.8 320 N5335B N5335B 3.7 3.9 4. 320 2 500 50 7.6 0.54 220 N5336B N5336B 4.09 4.3 4.52 290 2 500 6.4 0.49 0 N5337B N5337B 4.47 4.7 4.94 260 2 450 5 5.3 0.44 N5338B N5338B 4.85 5. 5.36 240.5 400 4.4 0.39 930 N5339B N5339B 5.32 5.6 5.88 220 400 2 3.4 0.25 865 N5340B N5340B 5.70 6.0 6.30 200 300 3 2.7 9 790 N534B N534B 5.89 6.2 6.5 200 200 3 2.4 765 N5342B N5342B 6.46 6.8 7.4 75 200 5.2.5 5 700 N5343B N5343B 7.3 7.5 7.88 75.5 200 5.7.7 5 630 N5344B N5344B 7.79 8.2 8.6 50.5 200 6.2 0.2 580 N5345B N5345B 8.27 8.7 9.4 50 2 200 6.6 9.5 0.2 545 N5346B N5346B 8.65 9. 9.56 50 2 50 7.5 6.9 9.2 0.22 520 N5347B N5347B 9.50.5 25 2 25 5 7.6 8.6 0.22 475 Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. 2. TOLERANCE AND TYPE NUMBER DESIGNATION: The JEDEC type numbers shown indicate a tolerance of ±5%. 3. ZENER VOLTAGE (V Z ) and IMPEDANCE (I ZT and I ZK ): Test conditions for zener voltage and impedance are as follows: I Z is applied 40 ± ms prior to reading. Mounting contacts are located 3/8 to /2 from the inside edge of mounting clips to the body of the diode (T A = 25 C +8 C, 2 C). 4. SURGE CURRENT (I R ): Surge current is specified as the maximum allowable peak, non recurrent square wave current with a pulse width, PW, of 8.3 ms. The data given in Figure 5 may be used to find the maximum surge current for a square wave of any pulse width between ms and 00 ms by plotting the applicable points on logarithmic paper. Examples of this, using the 3.3 V and 200 V zener are shown in Figure 6. Mounting contact located as specified in Note 2 (T A = 25 C +8 C, 2 C). 5. VOLTAGE REGULATION ( V Z ): The conditions for voltage regulation are as follows: V Z measurements are made at % and then at 50% of the I Z max value listed in the electrical characteristics table. The test current time duration for each V Z measurement is 40 ± ms. Mounting contact located as specified in Note 2 (T A = 25 C +8 C, 2 C). 6. MAXIMUM REGULATOR CURRENT (I ZM ): The maximum current shown is based on the maximum voltage of a 5% type unit, therefore, it applies only to the B suffix device. The actual I ZM for any device may not exceed the value of 5 watts divided by the actual V Z of the device. T L = 25 C at 3/8 maximum from the device body. The G suffix indicates Pb Free package or Pb Free packages are available. 2
ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted, V F =.2 V Max @ I F =.0 A for all types) Device (Note 7) Device Marking Zener Voltage (Note 8) Zener Impedance (Note 8) Leakage Current V Z (Volts) @ I ZT Z ZT @ I ZT Z ZK @ I ZK I ZK I R @ V R I R (Note 9) V Z (Note ) I ZM (Note ) Min Nom Max ma ma A Max Volts A Volts ma N5348B N5348B.45.55 25 2.5 25 5 8.4 8.0 0.25 430 N5349B N5349B.4 2 2.6 0 2.5 25 2 9. 7.5 0.25 395 N5350B N5350B 2.35 3 3.65 0 2.5 0 9.9 7.0 0.25 365 N535B N535B 3.3 4 4.7 0 2.5 75.6 6.7 0.25 340 N5352B N5352B 4.25 5 5.75 75 2.5 75.5 6.3 0.25 35 N5353B N5353B 5.2 6 6.8 75 2.5 75 2.2 6.0 0.3 295 N5354B N5354B 6.5 7 7.85 70 2.5 75 0.5 2.9 5.8 0.35 280 N5355B N5355B 7. 8 8.9 65 2.5 75 0.5 3.7 5.5 0.4 264 N5356B N5356B 8.05 9 9.95 65 3 75 0.5 4.4 5.3 0.4 250 N5357B N5357B 9 20 2 65 3 75 0.5 5.2 5. 0.4 237 N5358B N5358B 20.9 22 23. 50 3.5 75 0.5 6.7 4.7 0.45 26 N5359B N5359B 22.8 24 25.2 50 3.5 0 0.5 8.2 4.4 0.55 98 N5360B N5360B 23.75 25 26.25 50 4 0.5 9 4.3 0.55 90 N536B N536B 25.65 27 28.35 50 5 20 0.5 20.6 4. 0.6 76 N5362B N5362B 26.6 28 29.4 50 6 30 0.5 2.2 3.9 0.6 70 N5363B N5363B 28.5 30 3.5 40 8 40 0.5 22.8 3.7 0.6 58 N5364B N5364B 3.35 33 34.65 40 50 0.5 25. 3.5 0.6 44 N5365B N5365B 34.2 36 37.8 30 60 0.5 27.4 3.5 0.65 32 N5366B N5366B 37.05 39 40.95 30 4 70 0.5 29.7 3. 0.65 22 N5367B N5367B 40.85 43 45.5 30 20 90 0.5 32.7 2.8 0.7 N5368B N5368B 44.65 47 49.35 25 25 2 0.5 35.8 2.7 0.8 0 N5369B N5369B 48.45 5 53.55 25 27 230 0.5 38.8 2.5 0.9 93 N5370B N5370B 53.2 56 58.8 20 35 280 0.5 42.6 2.3.0 86 N537B N537B 57 60 63 20 40 350 0.5 45.5 2.2.2 79 N5372B N5372B 58.9 62 65. 20 42 400 0.5 47. 2..35 76 N5373B N5373B 64.6 68 7.4 20 44 500 0.5 5.7 2.0.52 70 N5374B N5374B 7.25 75 78.75 20 45 620 0.5 56.9.6 63 N5375B N5375B 77.9 82 86. 5 65 720 0.5 62.2.8.8 58 N5377B N5377B 86.45 9 95.55 5 75 760 0.5 69.2.6 2.2 52.5 N5378B N5378B 95 0 5 2 90 800 0.5 76.5 2.5 47.5 N5380B N5380B 4 20 26 70 50 0.5 9.2.3 2.5 39.5 N538B N538B 23.5 30 36.5 90 250 0.5 98.8.2 2.5 36.6 N5383B N5383B 42.5 50 57.5 8 330 500 0.5 4. 3.0 3.6 N5384B N5384B 52 60 68 8 350 650 0.5 22. 3.0 29.4 N5386B N5386B 7 80 89 5 430 750 0.5 37.0 4.0 26.4 N5387B N5387B 80.5 90 99.5 5 450 850 0.5 44 0.9 5.0 25 N5388B N5388B 90 200 2 5 480 850 0.5 52 0.9 5.0 23.6 Devices listed in bold, italic are ON Semiconductor Preferred devices. Preferred devices are recommended choices for future use and best overall value. 7. TOLERANCE AND TYPE NUMBER DESIGNATION: The JEDEC type numbers shown indicate a tolerance of ±5%. 8. ZENER VOLTAGE (V Z ) and IMPEDANCE (I ZT and I ZK ): Test conditions for zener voltage and impedance are as follows: I Z is applied 40 ± ms prior to reading. Mounting contacts are located 3/8 to /2 from the inside edge of mounting clips to the body of the diode (T A = 25 C +8 C, 2 C). 9. SURGE CURRENT (I R ): Surge current is specified as the maximum allowable peak, non recurrent square wave current with a pulse width, PW, of 8.3 ms. The data given in Figure 5 may be used to find the maximum surge current for a square wave of any pulse width between ms and 00 ms by plotting the applicable points on logarithmic paper. Examples of this, using the 3.3 V and 200 V zener are shown in Figure 6. Mounting contact located as specified in Note 7 (T A = 25 C +8 C, 2 C)..VOLTAGE REGULATION ( V Z ): The conditions for voltage regulation are as follows: V Z measurements are made at % and then at 50% of the I Z max value listed in the electrical characteristics table. The test current time duration for each V Z measurement is 40 ± ms. Mounting contact located as specified in Note 7 (T A = 25 C +8 C, 2 C).. MAXIMUM REGULATOR CURRENT (I ZM ): The maximum current shown is based on the maximum voltage of a 5% type unit, therefore, it applies only to the B suffix device. The actual I ZM for any device may not exceed the value of 5 watts divided by the actual V Z of the device. T L = 25 C at 3/8 maximum from the device body. The G suffix indicates Pb Free package or Pb Free packages are available. 3
θ JL, JUNCTION TO LEAD THERMAL RESISTANCE ( C/W) 40 30 20 EQUAL CONDUCTION THROUGH EACH LEAD 0 0 0.2 0.4 0.6 0.8 L, LEAD LENGTH TO HEATSINK (INCH) L L Figure. Typical Thermal Resistance TEMPERATURE COEFFICIENTS θvz, TEMPERATURE COEFFICIENT (mv/ C) @ I ZT 8 6 4 2 RANGE 0-2 3 4 5 6 7 8 9 V Z, ZENER VOLTAGE @ I ZT (VOLTS) Figure 2. Temperature Coefficient-Range for Units 3 to Volts θvz, TEMPERATURE COEFFICIENT (mv/ C) @ I ZT 300 200 0 50 30 20 RANGE 5 0 20 40 60 80 0 20 40 60 80 200 220 V Z, ZENER VOLTAGE @ I ZT (VOLTS) Figure 3. Temperature Coefficient-Range for Units to 220 Volts 4
θjl (t, D), TRANSIENT THERMAL RESISTANCE JUNCTION TO LEAD ( C/W) 0 0.5 0.2 0.05 0.02 0.0 D = 0 0.0 0.000000 P PK Figure 4. Typical Thermal Response L, Lead Length = 3/8 Inch t t 2 t, TIME (SECONDS) DUTY CYCLE, D = t /t 2 SINGLE PULSE T JL = JL (t)p PK REPETITIVE PULSES T JL = JL (t,d)p PK JL (t,d) = D * JL ( )+( D) * JL (t) [where JL (t) is D = 0 curve] 0.00000 0.0000 0.000 0.00 0.0 0 I r, PEAK SURGE CURRENT (AMPS) 40 20 PW = ms* PW = 8.3 ms* 4 2 0.4 0.2 *SQUARE WAVE PW = 0 ms* PW = 00 ms* 3 4 6 8 20 30 40 60 80 0 200 NOMINAL V Z (V) I r, PEAK SURGE CURRENT (AMPS) 30 20 5 2 0.5 V Z = 200 V V Z = 3.3 V 0.2 PLOTTED FROM INFORMATION GIVEN IN FIGURE 5 0 00 PW, PULSE WIDTH (ms) Figure 5. Maximum Non-Repetitive Surge Current versus Nominal Zener Voltage (See Note 4) Figure 6. Peak Surge Current versus Pulse Width (See Note 4) 00 I Z, ZENER CURRENT (ma) 00 0 T C = 25 C T = 25 C I Z, ZENER CURRENT (ma) 0 T = 25 C 2 3 4 5 6 7 8 9 V Z, ZENER VOLTAGE (VOLTS) Figure 7. Zener Voltage versus Zener Current V Z = 3.3 thru Volts 20 30 40 50 60 70 80 V Z, ZENER VOLTAGE (VOLTS) Figure 8. Zener Voltage versus Zener Current V Z = thru 75 Volts 5
I Z, ZENER CURRENT (ma) 0 80 0 20 40 60 80 200 220 V Z, ZENER VOLTAGE (VOLTS) Figure 9. Zener Voltage versus Zener Current V Z = 82 thru 200 Volts APPLICATION NOTE Since the actual voltage available from a given Zener diode is temperature dependent, it is necessary to determine junction temperature under any set of operating conditions in order to calculate its value. The following procedure is recommended: Lead Temperature, T L, should be determined from: T L = LA P D + T A LA is the lead-to-ambient thermal resistance and P D is the power dissipation. Junction Temperature, T J, may be found from: T J = T L + T JL T JL is the increase in junction temperature above the lead temperature and may be found from Figure 4 for a train of power pulses or from Figure for dc power. T JL = JL P D For worst-case design, using expected limits of I Z, limits of P D and the extremes of T J ( T J ) may be estimated. Changes in voltage, V Z, can then be found from: V = VZ T J VZ, the Zener voltage temperature coefficient, is found from Figures 2 and 3. Under high power-pulse operation, the Zener voltage will vary with time and may also be affected significantly by the zener resistance. For best regulation, keep current excursions as low as possible. Data of Figure 4 should not be used to compute surge capability. Surge limitations are given in Figure 5. They are lower than would be expected by considering only junction temperature, as current crowding effects cause temperatures to be extremely high in small spots resulting in device degradation should the limits of Figure 5 be exceeded. 6
PACKAGE DIMENSIONS SURMETIC 40, AXIAL LEAD CASE 07AA ISSUE O B D F K NOTES:. CONTROLLING DIMENSION: INCH 2. LEAD DIAMETER AND FINISH NOT CONTROLLED WITHIN DIMENSION F. 3. CATHODE BAND INDICATES POLARITY INCHES MILLIMETERS DIM MIN MAX MIN MAX A 0.330 0.350 8.38 8.89 B 30 45 3.30 3.68 D 0.037 0.043 0.94.09 F --- 0.050 ---.27 K.000.250 25.40 3.75 A K F r. http://onsemi.com 7 N5333B/D