ACZRC5340B-G Thru. ACZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device
|
|
- Bertha Dixon
- 5 years ago
- Views:
Transcription
1 CZRC5340B-G Thru. CZRC5388B-G Voltage: 6.0 to 200 Volts Power: 5 Watts RoHS Device Features - Glass passivated chip. - Low leakage. - Built-in strain relief. - Low inductance. - High peak reverse power dissipation. - For use in stabilizing and clipping circuits with high power. - Comply with EC-Q Mechanical data - Case: DO-24B(SMC), Molded plastic. - Epoxy: UL 94V-0 rate flame retardant. - Terminals: Solderable per MIL-STD-750,method 2026 guranteed. - Polarity: Color band denotes cathode end. - Mounting position: ny. - Weight: gram (approx.) 0.26(3.20) 0.4(2.90) 0.(2.53) 0.078(.98) 0.059(.5) 0.030(0.75) SMC/DO-24B 0.28(7.5) 0.260(6.60) Dimensions in inches and (millimeter) Circuit diagram 0.238(6.04) 0.29(5.55) 0.33(7.95) 0.305(7.75) 0.02(0.30) 0.006(0.5) 0.008(0.20) 0.000(0.00) Ratings (T=25 C unless otherwise noted) Parameter Symbol Value Units DC power dissipation at TL = 75 C (Note) PD 5 W Maximun forward voltage at IF= VF.2 V Junction temperature range TJ -55 to +50 C Storage temperature range TSTG -55 to +50 C Note: 2 () Mounted on 5.0mm (oz thick) Iand areas, lead temperature at TL=75 C. Page
2 RTING ND CHRCTERISTIC CURVES (CZRC5340B-G Thru. CZRC5388B-G) Fig. - Power temperature derating current Fig.2 - Temperature coefficients v.s. Zener voltage Power dissipation, PD (W) Temperature coefficient, θvz (mv/ C) Range Lead Temperature, TL ( C) Zener voltage, Vz Fig.3 - Typical thermal resistance v.s. lead length Fig.4 - surge power Junction to lead thermal resistance, θjl, ( C/W) Peak surge power, Ppk (W) Lead length to heatsink, L (inches) Pulse width, PW (ms) Fig.5- Typical thermal response L, lead length=3/8 inch Junction to lead trensient thermal resistance θjl(t,d), ( C/W) D=0.5 D=0.2 D=0. D=0.05 D=0.0 D=0 Note: Below 0. second, Thermal response curve is applicable Single pulse ΔTJL-ΘJL(t)Ppk to any lead length (L) repctitive pulse ΔTJL=ΘJL(t,D)Ppk Time, t (s) Page 2
3 Electrical Characteristics (at T=25 C unless otherwise specified) Part Number Notes: Nominal Zener Voltage IZT IZT IZT Zener Impedance IZK Reverse Leakage Current VR () The type number listed have a standard tolerance on th nominal zener voltage of ± 5%. (2) The reverse surge current is a non-repetitive,8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method. IZK (u) DC Zener Current IZM Marking Code CZRC5340B-G B CZRC534B-G B CZRC5342B-G B CZRC5343B-G B CZRC5344B-G B CZRC5345B-G B CZRC5346B-G B CZRC5347B-G B CZRC5348B-G B CZRC5349B-G B CZRC5350B-G B CZRC535B-G B CZRC5352B-G B CZRC5353B-G B CZRC5354B-G B CZRC5355B-G B CZRC5356B-G B CZRC5357B-G B CZRC5358B-G B CZRC5359B-G B CZRC5360B-G B CZRC536B-G B CZRC5362B-G B CZRC5363B-G B CZRC5364B-G B CZRC5365B-G B CZRC5366B-G B CZRC5367B-G B CZRC5368B-G B CZRC5369B-G B CZRC5370B-G B CZRC537B-G B CZRC5372B-G B CZRC5373B-G B CZRC5374B-G B CZRC5375B-G B CZRC5376B-G B CZRC5377B-G B Page 3
4 Electrical Characteristics (at T=25 C unless otherwise specified) Part Number Nominal Zener Voltage Zener Impedance Reverse Leakage Current DC Zener Current IZT IZT IZT IZK IZK VR IZM Marking Code (u) CZRC5378B-G B CZRC5379B-G B CZRC5380B-G B CZRC538B-G B CZRC5382B-G B CZRC5383B-G B CZRC5384B-G B CZRC5385B-G B CZRC5386B-G B CZRC5387B-G B CZRC5388B-G B Notes: () The type number listed have a standard tolerance on th nominal zener voltage of ± 5%. (2) The reverse surge current is a non-repetitive,8.3ms pulse width square wave or equivalent sine-wave superimposed on IZT per JEDEC Method. Page 4
5 Reel Taping Specification P0 P d Index hole E T B F W P C W 20 o D2 D D W2 Trailer Device Leader End Start 60mm (min) 400mm (min) Direction of Feed DO-24B (SMC) SYMBOL (mm) (inch) B C d T D D See Note.55 ± ± (Max.) 0.06 (Max.) (Min.).969 (Min.) D DO-24B (SMC) SYMBOL (mm) (inch) E F P P0 P W W.75 ± ± ± ± ± ± ± ± ± ± ± ± Notes:., B, and C the clearance between the component and the cavity must be within 0.5 mm max. for 8 mm tape and 2 mm tape,.0 mm max. for 6mm tape and 24 mm tape. W (Max.) (Max.) Page 5
6 Marking Code Part Number CZRC5340B-G Thru. CZRC5388B-G Series Marking Code XXXX XXXX 3. XXXX: Marking code (see Page.3~4) 4. : Cathod Band Suggested PD Layout SIZE DO-24B(SMC) (mm) (inch) B B 4.69 MX 0.85 MX D C.52 MIN MIN D 3.20 MIN 0.26 MIN C Standard Packaging Case Type DO-24B (SMC) REEL ( pcs ) 3,000 REEL PCK Reel Size (inch) 3 Page 6
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free
CZRB5338B-HF Thru. CZRB5388B-HF Voltage: 5.1V to 200V Power: 5 W RoHS Device Halogen Free Features - Glass passivated chip - Low leakage - Built-in strain relief - Low inductance - High peak reverse power
More informationZ1SMA4736A Z1SMA4757A
1W Surface Mount Zener Diodes Features For surface mounted applications in order to optimize board space Built-in strain relief Glass passivated junction Low inductance High temperature soldering guaranteed:
More informationtechnický list 1N5333B through 1N5388B 5 Watt Surmetic 40 Silicon Zener Diodes TECHNICAL DATA str 1
Dodavatel: GM electronic, spol. s r.o., Křižíkova 77, 86 Praha 8 zákaznická linka: 84 6 7 technický list TECHNICAL DATA Watt Surmetic 4 Silicon Zener Diodes This is a complete series of Watt Zener Diodes
More informationCHENMKO ENTERPRISE CO.,LTD
CHENMKO ENTERPRISE CO.,LTD SURFACE MOUNT ZENER SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE.V TO 9V MMPZBGP THRU MMPZBGP FEATURE * High temperature soldering type. * ESD rating of class (> kv) per human
More informationMCC 2EZ5.1D5 THRU 2EZ75D5. Features Glass Passivation Junction. 2 W Glass Passivated Junction Silicon Zener Diode 5.
omponents 76 Marilla Street Chatsworth!"# $%!"# EZ.D THRU EZ7D Features Glass Passivation Junction Lead Free Finish/RoHS Compliant (Note C) ("P"Suffix designates Compliant. See ordering information) Excellent
More informationM3Z2V4~M3Z75V ZENER DIODES 200mW ZENER VOLTAGE REGULATORS
DESCRIPTION This series of Zener Diodes is packaged in a SOD-323 surface mount package that has a power dissipation of 200mW. They are designed to provide voltage regulation protection and are especially
More informationSEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 0 mw DO-35 Glass Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP 0 Milliwatt Hermetically Sealed Glass Silicon Zener Diodes Specification
More informationMCC SMA2EZ5.1D5 THRU SMA2EZ75D5. Features. 2 W Glass Passivated Junction Silicon Zener Diode Volts.
Features Mechanical Data TERMINALS : Solder plated, solderable per MIL-STD-7, method 6 POLARITY : Color band denotes positive end (cathode) omponents 76 Marilla Street Chatsworth!"# $%!"# Lead Free Finish/Rohs
More information1N47- Series DO-41. Mechanical Data. Page <1> 18/07/08 V1.1
Features: Low profile package. Built-in strain relief. Glass passivated junction. Low inductance. Typical I R less than 5.0µA above 11V. High temperature soldering guaranteed: 260 C/10 seconds at terminals
More informationMCC. Revision: E 2014/02/26 1N5338B THRU 1N5388B. Features. 5 Watt Zener Diode 5.1 to 200 Volts. Maximum Ratings:
Features Zener Voltage From 5.V to 00V Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level Lead Free Finish/RoHS Compliant (Note) ("P"Suffix designates Compliant. See ordering information)
More informationELECTROSÓN. 1N53 Series. 5 Watt Surmetic 40 Zener Voltage Regulators
5 Watt Surmetic 40 Zener Voltage Regulators This is a complete series of 5 Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of silicon oxide
More informationSurface Mount Silicon Zener Diodes
FEATURES CREAT BY ART - Low profile package - Ideal for automated placement - Glass passivated junction - Built-in strain relief - Low inductance - Typical IR less than 0.5μA above 11V - ESD Rating of
More informationMCC. Revision: /06/09 1N5338B THRU 1N5369B
Features Zener Voltage From 5.V to 5V Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 For Available Tolerances See Note Marking : Cathode band and type number Maximum Ratings:
More informationSilicon 5 Watt Zener Diodes
Compliant Silicon 5 Watt Zener Diodes DESCRIPTION The 1N5334Be3 through IN5388Be3 JEDEC registered series of axial-leaded 5.0 watt Zeners provides a voltage selection of 3.6 V to 200 V with different tolerances
More informationSZAF5.1A~SZAF220A ZENER DIODE 1.5W
DESCRIPTION The are available in SMAF Package ORDERING INFORMATION Package Type Part Number SZAF5.1A SZAF36A SZAF5.6A SZAF39A SZAF6.2A SZAF43A SZAF6.8A SZAF47A SZAF7.5A SZAF51A SZAF8.2A SZAF56A SZAF9.1A
More information2M6.8Z - 2M200Z Taiwan Semiconductor
2W, 6.8V - 200V Glass Passivated Junction Silicon Zener Diodes FEATURES - Glass passivated chip junction - Typical I R less than μa - Compliant to RoHS Directive 20/65/EU and in accordance to WEEE 2002/96/EC
More information5KP_A. VRM : Volts PPK : 5000 Watts MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Features 5000W Peak Pulse Power Excellent clamping capability Low incremental surge resistance Fast response time : typically less then 1.0 ps from 0 volt to VBR(min) Typical IR less then 1μA above 10V
More information1N4728A-G SERIES SILICON ZENER DIODE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS FEATURES MECHANICAL DATA
SILICON ZENER DIODE VOLTAGE 3.3 to 75 Volt POWER 1 Watt FEATURES Low inductance High temperature soldering : 260 C /10 seconds at terminals Glass package has Underwriters Laboratory Flammability Classification
More informationSEMICONDUCTOR GENERAL DATA
MOTOROLA SEMICONDUCTOR TECHNICAL DATA 5 mw SOT- Zener Voltage Regulator Diodes GENERAL DATA APPLICABLE TO ALL SERIES IN THIS GROUP Zener Voltage Regulator Diodes Manufacturing Locations: WAFER FAB: Phoenix,
More informationBZT52-B2V4~BZT52-B75 SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 4 mwatt FEATURES Planar Die construction 4mW Power Dissipation.154(3.9).141(3.6).1(2.8).98(2.5) Zener Voltages from 2.4~75V Ideally Suited
More information2 Anode. Parameter Symbol Value Units. Max Reverse Leakage Current V IZT IZT IZK VR Nom. V Min. V Max.
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4~33 Volt POWER 25 mwatt FEATURES.42(.5).37(.95) Planar Die construction 25mW Power Dissipation Zener Voltages from 2.4~ Ideally Suited for Automated Assembly
More information1N5333B Series. 5 Watt Surmetic 40 Zener Voltage Regulators
Preferred Device Watt Surmetic 40 Zener Voltage Regulators This is a complete series of Watt Zener diodes with tight limits and better operating characteristics that reflect the superior capabilities of
More informationTransient Voltage Suppression Diodes Axial Leaded 1500W TVS Diode1.5KE Series
The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Dimension Dim Millimeters Inches Min
More information500 mw SURFACE MOUNT ZENER DIODES
Available on commercial versions 0 mw SURFACE MOUNT ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The 1N4678UR-1 thru 1N4717UR-1 series of 0.5 watt glass surface mount DO-213AA
More informationBAT42W/BAT43W SURFACE MOUNT SCHOTTKY BARRIER DIODE
Features: Low Turn-on Voltage Fast Switching PN Junction Guard Ring Transient and ESD Protection Designed for Surface Mount Application Plastic Material UL Recognition Flammability Classification 94V-O
More information1N5333B-1N5388B. Features. Mechanical Data DO - 201AE POWER DISSIPATION: 5.0 W. Zener Diodes MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
N333B-N388B POWER DISSIPTION:.0 W Features DO - E Silicon planar power zener diodes For use in stabilizing and clipping curcuits with high power rating. Standard zener voltage tolerance is ±%. dd suffix
More informationSingle-Phase 6.0A Glass Passivated Bridge Rectifier
0 Single-Phase 6.0A Glass Passivated Bridge Rectifier 0 Features D3K Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface
More informationBZT52-C2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V 0.078(1.95) 0.068(1.75) Ideally Suited for
More informationTransient Voltage Suppressor
Features: Glass Passivated Junction Low Incremental Surge Resistance, Excellent Clamping Capability Low Profile Package With Built-In Strain Relief for Surface Mounted Applications 600W Peak Pulse Power
More informationSM320A~SM3200A SCHOTTKY DIODE REVERSE VOLTAGE 20 TO 200V FORWARD CURRENT 3.0A
320A~3200A DESCRIPTION The 320A~3200A are available in A Package. ORDERING INFORMATION Package Type Part Number 320A 340A 360A 380A A 3100A 3120A 3150A 3200A Note 5,000pcs/Reel AiT provides all RoHS Compliant
More informationP6KE6.8A - 600CA. 600W Transient Voltage Suppressor. Features. Mechanical Data. Maximum Ratings (T Ambient=25ºC unless noted otherwise) DO-15
Features Glass passivated chip junction 600W peak pulse power capability on 10/1000μs waveform repetition rate(duty cycle): 0.01% Fast response time: typically less than 1.0ps from 0v to VBR Min. 600W
More informationZener Voltage Regulators
Zener Voltage Regulators 200 mw SOD-323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
More information500 mw AXIAL-LEADED ZENER DIODES
Available on commercial versions 0 mw AXIAL-LEADED ZENER DIODES DESCRIPTION Screening in reference to MIL-PRF-190 available The series of 0.5 watt Zener voltage regulators provides a selection from 1.8
More informationPMURA2J / MURB2J / MUR260K
SUPERFAST RECOVERY RECTIFIERS Voltage 600 V Current 2 A Features Superfast recovery times-epitaxial construction Low forward voltage, high current capability Hermetically sealed. Low leakage High surge
More informationBZD17C SERIES Taiwan Semiconductor
0.8W, 11V - 220V Voltage Regulator Diodes FEATURES - Silicon zener diodes - Low profile surface-mount package - Zener and surge current specification - Low leakage current - Excellent stability - Compliant
More informationMMSZ5221B-AU~MMSZ5262B-AU
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 51 Volt POWER 500 mwatt FEATURES 0.154(3.90) 0.141(3.60) Planar Die construction 500mW Power Dissipation Ideally Suited for Automated Assembly Processes
More informationMolded plastic body over glass passivated junction Plated axial leads, solderable per MIL-STD-750, Method 2026
T6L Features Stand-off voltage from 5.0 to 250 volts Glass passivated junction 5000W Peak Pulse Power capability on 10/1000μs waveform repetition rate(duty cycle): 0.05% Fast response time: typically less
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationBZT52-B2V4S SERIES SURFACE MOUNT SILICON ZENER DIODES FEATURES MECHANICAL DATA MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
SURFACE MOUNT SILICON ZENER DIODES VOLTAGE 2.4 to 75 Volt POWER 200 mwatt FEATURES Planar Die construction 200mW Power Dissipation Zener Voltages from 2.4~75V Ideally Suited for Automated Assembly Processes
More informationCD0603/1005-Z Surface Mount Zener Diode Series
*RoHS OMPLINT S3 Features RoHS compliant* Zener voltages 2. V to 39 V Fits SO323 and SO523 pplications - converters Portable electronics Industrial controllers esktop Ps and notebooks 63/5-Z Surface Mount
More information500mW, 2% Tolerance Zener Diodes
500mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 2% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC Halogen-free
More informationZener Voltage Regulators
Zener Voltage Regulators 200 mw SOD 323 Surface Mount This series of Zener diodes is packaged in a SOD 323 surface mount package that has a power dissipation of 200 mw. They are designed to provide voltage
More information500mW 5% Zener Diodes
MMSZ522B - MMSZ5262B 500mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 20/65/EU and in
More informationJEDEC DO-214AB(SMC) molded plastic. Solder plated, solderable per MIL-STD-750, Method 2026 Cathode indicated by color band except Bi-directional
3000W Surface Mount Transient Voltage Suppressor 3000W Surface Mount Transient Voltage Suppressor Features Stand-off voltage from 5.0 to 220 volts Glass passivated junction Excellent clamping capability
More informationP1SMA5914-AU ~ 1SMA5945-AU Series
SILICON ZENER DIODE oltage 3.6~68 Power 1.5 W Features Silicon planar Zener diode Low profile surface-mount package Low leakage current Excellent stability High temperature soldering: 260 o C/ seconds
More informationBZW04-5V8 thru BZW TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors DO-41 (DO-204AL) FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 400 W peak pulse power capability with a 10/0 μs waveform,
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Surface mounting device (SMD) type Moisture sensitivity level: level, per J-STD-020
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide Zener voltage range selection: 2.4V to 75V V Z tolerance selection of ± 5% Compliant to RoHS directive 2011/65/EU and in accordance to WEEE 2002/96/EC
More informationSMF5.0-SMF170A SMF5.0-SMF170A
SMF5.0-SMF170A TRANSIENT VOLTAGE SUPPRESSOR Features: For surface mounted applications in order to optimize board space Low profile space Glass passivated chip Low inductance Excellent clamping capability
More informationThe Powermite Family. Contents. Introduction. Outperforms Conventional SMT
The Powermite Family Introduction Powermite is Microsemi s patented low-profile architecture for packaging surface mount devices with the industry's highest power density in the smallest possible footprint.
More informationContinental Device India Limited
5W AXIAL LEAD ZENER DIODES Axial Lead Plastic Package Features 1). Silicon Planar Power Zener Diodes. 2). For use in Stabillizing and Clipping Circuits with High Power Rating. 3). Standard Zener Voltage
More informationJIEJIE MICROELECTRONICS CO., Ltd
JIEJIE MICROELECTRONICS CO., Ltd 20KP Series 20KW Transient Voltage Suppressor Rev.2.3 DESCRIPTION: The 20KP series of high current uni/bi-directional transient suppressors are designed for A.C. line protection
More informationCharacteristics Symbol Limit Unit IF = 1.5A V F -- IF = 3.0A V F -- VR = 800V I R -- --
GLASS PASSIVATED SURFACE MOUNT BRIDGE RECTIFIERS REVERSE VOLTAGE 800 Volts FORWARD CURRENT 3.0 Ampere GENERAL DESCRIPTION Suitable for AC-to-DC bridge full wave rectification for SMPS, LED lighting, adapter,
More information500mW, 5% Tolerance SMD Zener Diodes
500mW, 5% Tolerance SMD Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 5V V Z tolerance selection of ± 5% Moisture sensitivity level: level, per J-STD-020 Compliant to RoHS directive
More information500mW 5% Zener Diodes
5mW 5% Zener Diodes FEATURES Wide zener voltage range selection: 2.4V to 36V VZ Tolerance Selection of ± 5% Surface device type mountin Compliant to RoHS directive 211/65/EU and in accordance to WEEE 22/96/EC
More informationTSZL52C2V4 thru TSZL52C39 Taiwan Semiconductor. SMD Zener Diode. Small Signal Product FEATURES MECHANICAL DATA
SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 39V - Designed for mounting on small surface - Extremely thin / leadless package - Packing code with suffix "G" means green compound
More informationCD0603/1005-Z Surface Mount Zener Diode Series. Zener Voltage Zener Impedance Reverse Current Part Number OBSOLETE
pplications - converters Portable electronics Industrial controllers esktop Ps and notebooks 63/5-Z Surface Mount Zener iode Series lectrical haracteristics (@ T = 25 Unless Otherwise Noted) Zener Voltage
More informationTransient Voltage Suppressor
Features: Optimized for LAN Protection Applications Low Profile Package With Built-In Strain Relief For Surface Mounted Applications Low Incremental Surge Resistance, Excellent Clamping Capability 400W
More information200mW, 2% Tolerance Zener Diodes
200mW, 2% Tolerance Zener Diodes FEATURES Wide zener voltage range selection: 3.6V to 36V V Z tolerance selection of ± 2% Moisture sensitivity level: level 1, per J-STD-020 Compliant to RoHS directive
More informationSMF5.0A thru SMBJ190CA
Page No. : 1/9 Surface Mount Transient Voltage Suppressors Peak Pulse Power 200W Working Voltage 5.0 to 190V SMF5.0A thru SMF190CA Features Glass passivated chip Uni and Bidirectional unit Excellent clamping
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors DO-214AA (SMB J-Bend) PRIMARY CHARACTERISTICS V BR (uni-directional) 6.4 V to 49.1 V V BR (bi-directional) 6.4 V to 49.1 V V WM
More informationDATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE
DATA SHEET ZENER DIODES 1 W DO-41 GLASS SEALED PACKAGE ZENER DIODES RD2.0F to RD82F DESCRIPTION NEC type RD F Series are DHD (Double Heatsink Diode) Construction planar type zener diodes possessing an
More informationPart Number Compliance Case Packaging (Type Number)-7* Commercial SOD323 3,000/Tape & Reel
SURFACE MOUNT PRECISION ZENER DIODE Features Very Sharp Breakdown Characteristics Very Tight Tolerance on V Z Ideally Suited for Automated Assembly Processes Very Low Leakage Current Totally Lead-Free
More informationCM and SB Series Single Phase Bridge Rectifiers
Features: Electrically isolated metal case for maximum heat dissipation. Metal case with an electrically isolated mylar. Rating to 0 Volts PRV. Ampere surge capability. High efficiency. Mounting: Through
More informationSOD123. Top View. Date Code Key Year Code A B C D E H I J K L
SURFACE MOUNT ZENER DIODE Features Mechanical Data Planar Die Construction 5mW Power Dissipation General Purpose, Medium Current Ideally Suited for Automated Assembly Processes Totally Lead-Free & Fully
More information500mW, 2% Tolerance SMD Zener Diode
500mW, 2% Tolerance SMD Zener Diode FEATURES - Wide zener voltage range selection : 2.4V to 75V - Surface mount device type - Moisture sensitivity level - Pb free and RoHS compliant - V Z Tolerance Selection
More informationM C C. SMAJ4733A THRU SMAJ4764A. Features. 1 Watt Zener Diode 5.1 to 100 Volts DO-214AC (SMA)( LEAD FRAME)
Features omponents 20736 Marilla Street Chatsworth!"# $%!"# Halogen free available upon request by adding suffix "-HF" Low Zener Impedance Low egulation Factor VZ tolerance: ±5% For Surface Mount Applications
More informationSMAJ SERIES. Surface Mount Transient Voltage Suppressor Diodes
Surface Mount Transient Voltage Suppressor Diodes Features Low profile package Ideal for automated placement Glass passivated chip junction High forward surge capability Available in uni-directional 400
More informationZENER DIODES RD2.0S to RD150S
DATA SHEET ZENER DIODES RD2.0S to RD150S ZENER DIODES 200 mw 2-PIN SUPER MINI MOLD DESCRIPTION Type RD2.0S to RD150S series are 2 pin super mini mold package zener diodes possessing an allowable power
More informationPart Number: XZDG10X146S. Features. Package Schematics. 5.0mm x 5.0mm SURFACE MOUNT LED LAMP
Features 5.0mm X 5.0mm X 1.2mm SMD LED Zener diode provided for ESD protection IR-reflow compatible Standard Package: 500pcs / Reel MSL (Moisture Sensitivity Level): 3 RoHS compliant ATTENTION OBSERVE
More informationMaximun Ratings and Electrical Characteristics at 25 C
SOD123W Voltage Power Dissipation 9.1 to 220 V 1 W FEATURE Low profile package Ideal for automated placement Low leakage current High surge current and zener capability Low differential resistance Low
More informationSF5x Series DO-201AD. Page <1> 26/07/08 V1.1. Dimensions : Inches (Millimetres)
Features: High efficiency, low V F. High current capability. High reliability. High surge current capability. Low power loss. For use in low voltage, high frequency inventor, free wheeling, and polarity
More information1Z6.2~1Z390, 1Z6.8A~1Z30A
TOSHIBA ZENER DIODE SILICON DIFFUSED JUNCTION TYPE 1Z6.2~1Z390, 1Z6.8A~A CONSTANT REGULATION TRANSIENT SUPPRESSORS Unit: mm Average Power Dissipation : P = 1 W Peak Reverse Power Dissipation : P RSM =
More informationDescription. Applications
3.5x3.5 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features White SMD package, silicone resin. Low thermal resistance. Compatible
More informationPackaging 1. Cathode 2. Anode V Zener operating resistance. 120 Reverse current IR VR = 1 V
Established : -3- Revised : 3-5-8 Doc No. TT4-EA-35 Silicon epitaxial planar type For constant voltage / For surge absorption circuit DZ43 in Mini type package.6 Unit: mm.3 Features Excellent rising characteristics
More informationMM3ZxxxST1G Series, SZMM3ZxxxST1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount Tight Tolerance Portfolio
MM3ZxxxST1G Series, SZMM3ZxxxST1G Series Zener Voltage Regulators 3 mw Surface Mount Tight Tolerance Portfolio This series of Zener diodes is packaged in a surface mount package that has a power dissipation
More informationLighthouse LEDs. Technical Data Sheet. Customer Approval. Product Name. Part Number. Customer. Customer PN. Version.
Technical Data Sheet Product Name 0805 High Bright Purple Chip LED Part Number A-0805UUVC Customer Customer PN Version Date Customer Approval Instituted By Checked By: Approved By 1. Features: Package
More informationSurface Mount Zener Diode
Surface Mount Zener Diode FEATURES - Zener voltages from : 2.4V - 39V - Planar die construction - Ideally suited for automated assembly processes - Moisture sensitivity : Level 1 per J-STD-2 MECHANICAL
More informationSurface Mount 18,000 W Transient Voltage Suppressor
MPLAD18KP7.0A MPLAD18KP200CA Datasheet Surface Mount 18,000 W Transient Voltage Suppressor Released June 2017 Contents 1 Revision History... 1 1.1 Revision 1.0... 1 2 Product Overview... 2 2.1 Features...
More informationM C C. 1N5221 THRU 1N5267
omponents 736 Marilla Street Chatsworth!"# $%!"# N522 THRU N5267 Features Wide Voltage Range Available Glass Package High Temp Soldering: 260 C for Seconds At Terminals Marking : Cathode band and type
More informationMPLAD36KP14A MPLAD36KP400CA
Available Surface Mount 36,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 36 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationMPLAD18KP7.0A MPLAD18KP200CA
Available Surface Mount 18,000 Watt Transient Voltage Suppressor DESCRIPTION These high power 18 kw rated transient voltage suppressors in a surface mount package are provided with design features to minimize
More informationCDMSP M Surface Mount TVS Diode Array
*RoHS COMPLIANT Features RoHS compliant* Protects four I/O lines Ultra-low capacitance ~.55 pf ESD protection > kv Surge protection Applications High Definition Multimedia Interface (HDMI) Digital Visual
More informationSPEC NO: DSAM4545 REV NO: V.2B DATE: MAR/29/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED:
3.5x2.8 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KA-3529ASYLZ4S Super Bright Yellow Features Single color. Suitable for all
More informationTransient Voltage Suppressors. AK3 Series. Circuit Protection System ELECTRONICS
ELECTRONICS Transient Suppressors K3 Series Transient Suppressors - K3 Series Features Very low clamping voltage Ultra compact: less than one-tenth the size of traditional discrete solutions Sharp breakdown
More information20 Zener rise operating resistance RZK IZ = 0.5 ma. 60 Reverse current. 0.1 A Temperature coefficient of zener voltage *3 SZ IZ = 5 ma IR VR = 4 V
Established : 009--09 Revised : 03-07- Doc No. TT4-EA-78 Silicon epitaxial planar type For constant voltage / For surge absorption circuit DZJ068 in SSMini type package Features Excellent rising characteristics
More informationSOD123F (Type B) Top View. Part Number Compliance Case Packaging (Type Number)-7* AEC-Q101 SOD123F (Type B) 3,000/Tape & Reel
SURFACE MOUNT ZENER DIODE Features Flat Lead Package Design for Low Profile and High Power Dissipation Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. Green Device (Note
More informationFeatures. Case Material: Molded Plastic, Green Molding Compound. Computers and Peripheral
LOW CAPACITANCE BIDIRECTIONAL TVS DIODE Product Summary V BR (Min) I PP (Max) C T (Typ) 15V 9A 2pF Description This new generation TVS is designed to protect sensitive electronics from the damage due to
More informationML Varistor Series. Surface Mount Varistors
Pb The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
More informationDZ L Silicon epitaxial planar type
Established : -9-9 Revised : 3-5-8 Doc No. TT4-EA-378 DZ456L DZ456L Silicon epitaxial planar type For constant voltage / For surge absorption circuit Capability of withstanding a high surge type DZW56
More informationPart Number: XZMYLA92S-4. Features. Applications. Package Schematics. 3.5x3.5 mm SMD CHIP LED LAMP
Features 3.5mm X 3.5mm X 1.15mm SMD LED Zener diode provided for ESD Protection IR-reflow compatible Ideal for accent lighting Standard Package: 2,000pcs / Reel MSL (Moisture Sensitivity Level): 2a RoHS
More informationML Varistor Series. Surface Mount Varistors. Features. Size Metric EIA
The ML Series family of Transient Voltage Surge Suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress a variety of transient events,
More informationSMBJ SERIES Surface Mount Transient Voltage Suppressor Voltage Range 5.0 to 170 Volts 600 Watts Peak Power
SMBJ SERIES Surface Mount Transient Voltage Suppressor Voltage Range 5. to 17 Volts 6 Watts Peak Power Features SMB/DO-214AA For surface mounted application Low profile package Built-in strain relief Glass
More informationDescriptions. Applications
3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535QB25Z1S Blue Features White SMD package, silicone resin. Low thermal
More informationDescriptions. Applications
3.5x3.5 mm SMD CHIP LED LAMP ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3535SEL1Z1S Hyper Orange Features White SMD package, silicone resin. Low
More informationMM3ZxxxT1G Series, SZMM3ZxxxT1G Series. Zener Voltage Regulators. 300 mw SOD 323 Surface Mount
MM3ZxxxT1G Series, SZMM3ZxxxT1G Series Zener Voltage Regulators 3 mw Surface Mount This series of Zener diodes is packaged in a surface mount package that has a power dissipation of 3 mw. They are designed
More information5.0mm x 5.0mm SURFACE MOUNT LED LAMP. Features. Descriptions. Package Dimensions
5.0mm x 5.0mm SURFACE MOUNT LED LAMP Part Number: AAAF5051XQR412ZXS-N1 Features ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Suitable for all SMT assembly and solder
More information300 Zener rise operating resistance RZK IZ = 0.5 ma. 300 Reverse current A Temperature coefficient of zener voltage *3 SZ IZ = 2 ma
Silicon epitaxial planar type For constant voltage / For surge absorption circuit DZJ390 in SSMini type package Features Excellent rising characteristics of zener current Iz Low zener operating resistance
More informationSurface-Mount 36,000 W Transient Voltage Suppressor
Surface-Mount 36,000 W Transient Voltage Suppressor 1 Product Overview These high-power, 36 kw rated transient voltage suppressors in a surface-mount package are provided with design features to minimize
More informationSMBG5.0A thru SMBG188CA. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.0 V to 188 V V BR (uni-directional) 6.4 V to 231 V V BR (bi-directional) 6.4 V to 231 V P PPM 600 W I FSM (uni-directional
More information