Online data sheet S-0E S00 Mini Remote
C D E F I J K L M N O P Q R S T Ordering information Tpe Part no. S-0E 0 Usage Other models and accessories www.sick.com/s00_mini_remote Detailed technical data Features Usage Can be used onl in the EFI sstem network, e.g. with a Flei Soft safet controller or another S00 or S000 safet laser scanner Protective field range m Warning field range 8 m (at % reflectivit) Distance measuring range 0 m Tpe of field set Triple field sets Number of field sets Number of fields 8 Number of monitoring cases Scanning angle 0 Resolution (can be configured) 0 mm, 0 mm, 0 mm, 0 mm, 0 mm ngular resolution 0. Response time 80 ms Protective field supplement 00 mm Number of multiple samplings..., configurable Dela of automatic reset s... 0 s, configurable Depending on basic response time and multiple sampling. Safet-related parameters Tpe Tpe (IEC 9) Safet integrit level SIL (IEC 08) SILCL (EN 0 Categor Categor (EN ISO 89) Performance level PL d (EN ISO 89) PFD (mean probabilit of a dangerous failure per hour) 8.0 0-8 (EN ISO 89) Online data sheet 0-- ::0 Subject to change without notice
TM (mission time) 0 ears (EN ISO 89) Functions Multiple sampling Monitoring case switching Static protective field switching Dnamic protective field switching Contour as a reference Safe SICK device communication via EFI Interfaces Connection tpe Cable, 0 mm, with male connector M, -pin Inputs Static control inputs with EFI Standb Outputs Depends on the configuration of the connected EFI device Configuration method PC with CDS (Configuration and Diagnostic Software) Configuration and diagnostics interface RS- Transmission rate 8. kaud Safe SICK device communication via EFI Transmission rate 00 kaud Cable length 0 m ) Fieldbus, industrial network Integration via EFI gatewas CNopen, Ethernet, PROFIUS DP, PROFIUS PROFIsafe, PROFINET PROFIsafe ) ) ) Can be used onl in the EFI sstem network, e.g. with a Flei Soft safet controller or another S00 or S000 safet laser scanner. Use onl pre-assembled etension cables. For a suitable EFI-gatewa see modules and gatewas in the accessor section of connection sstems. Electrical data Protection class III (EN 08, EN 090) Suppl voltage Vs V DC (.8 V DC... 0 V DC) Power consumption 0. 0. ) ) t V DC without output load. t V DC including maimum output load. Mechanical data Dimensions (W D) 0 mm mm 0 mm Weight 0.8 kg, without connecting cables ousing material luminum die cast ousing color RL 0 (ellow), RL 900 (black) Optics cover material Polcarbonat Optics cover surface finish Outside with scratch-resistant coating 0-- ::0 Online data sheet Subject to change without notice
C D E F I J K L M N O P Q R S T mbient data Enclosure rating IP (EN 09) mbient operating temperature 0 C... +0 C Storage temperature C... +0 C Vibration resistance g, 0... 0 (IEC 9-, IEC 9-) Shock resistance 0 g, ms (IEC 9-, IEC 9-) Other information Tpe of light Pulsed laser diode Wave length 90 nm Detectable remission.8 %... >,000 %, reflectors Laser class ( CFR 00.0 and 00., IEC 08- Classifications ECl@ss.0 ECl@ss.. ECl@ss.0 ECl@ss. ECl@ss.0 ECl@ss 8.0 ECl@ss 8. ECl@ss 9.0 ETIM.0 EC000 ETIM.0 EC000 UNSPSC.090 98 Online data sheet 0-- ::0 Subject to change without notice
Dimensional drawing (Dimensions in mm (inch)) Laser scanner. (.0) (.) 9. (.) Ø 9 (.0). (.) (.8) 0 (.0) Ma. 00 (.8) Min. (0.9) 0 (.09). (.0).8. (.) Min. (0.9) (0.9). (.) M. 0 (9.8) (0.0) 9±0. (.9) 0-- ::0 Online data sheet Subject to change without notice 0. (0.
C D E F I J K L M N O P Q R S T Connection diagram S00 Mini Remote: Protective field switch with the help of a Flei Soft safet controller + V S00 Mini Remote S00 Mini Remote W k k N GN YE k GY PK U S k W k N GN YE S S GY PK U S S k EFI I I I I I I X = ousing Flei Soft CPU EFI Flei Soft XTIO I I8 Q K Q Q K Q X 0V E89/00/0-0-0 Online data sheet 0-- ::0 Subject to change without notice
Protective field switching between an S000 Epert and an S00 Mini Remote with static and dnamic inputs + V k IN S000 Epert IN k /f TL 0 + 0 90 8 9 0 8 + 0 90 9 k k TL /f k k S00 Mini Remote W N GN YE GY PK U = ousing K K 8 0V E000/0/0-0- S000 Epert with S00 Mini Remote in an EFI sstem with relas/contactors Operating mode: without restart interlock with eternal device monitoring Direction of travel-dependent dnamic protective field switching using the incremental encoders C and D as well as static protective field switching using the control inputs and of the S000. The protective fields affect the OSSDs on the S000 Epert. is disabled. For categories and, this integration must be dual-channel (/ paths). Single-channel insertion in the control ( path) is onl possible with a single-channel control and b taking the risk analsis into account. S000 Epert with S00 Mini Remote in an EFI sstem with relas/contactors Operating mode: without restart interlock, with eternal device monitoring Static protective field switching b the S000 control inputs IN to D. The protective fields affect the OSSDs on the S000 Epert. is disabled. For categories and, this integration must be dual-channel (/ paths). Single-channel insertion in the control ( path) is onl possible with a single-channel control and b taking the risk analsis into account. Two S00 Mini Remote Protective field evaluation and switching via EFI using a Flei Soft safet controller is disabled. For categories and, this integration must be dual-channel (/ paths). Single-channel insertion in the control ( path) is onl possible with a single-channel control and b taking the risk analsis into account. 0-- ::0 Online data sheet Subject to change without notice
C D E F I J K L M N O P Q R S T Protective field switching between an S000 Epert and an S00 Mini Remote with static inputs + V IN k IN IN C C IN D D S000 Epert 0 8 9 0 8 9 k k k W S00 Mini Remote k N GN YE k GY PK U = ousing K K 0V E/00/0-0-0 S000 Epert with S00 Mini Remote in an EFI sstem with relas/contactors Operating mode: without restart interlock with eternal device monitoring Direction of travel-dependent dnamic protective field switching using the incremental encoders C and D as well as static protective field switching using the control inputs and of the S000. The protective fields affect the OSSDs on the S000 Epert. is disabled. For categories and, this integration must be dual-channel (/ paths). Single-channel insertion in the control ( path) is onl possible with a single-channel control and b taking the risk analsis into account. S000 Epert with S00 Mini Remote in an EFI sstem with relas/contactors Operating mode: without restart interlock, with eternal device monitoring Static protective field switching b the S000 control inputs IN to D. The protective fields affect the OSSDs on the S000 Epert. is disabled. For categories and, this integration must be dual-channel (/ paths). Single-channel insertion in the control ( path) is onl possible with a single-channel control and b taking the risk analsis into account. Two S00 Mini Remote Protective field evaluation and switching via EFI using a Flei Soft safet controller is disabled. For categories and, this integration must be dual-channel (/ paths). Single-channel insertion in the control ( path) is onl possible with a single-channel control and b taking the risk analsis into account. 8 Online data sheet 0-- ::0 Subject to change without notice
Recommended accessories Other models and accessories www.sick.com/s00_mini_remote rief description Tpe Part no. piece, mounting bracket for rear mounting on wall or machine Mounting kit a 0 piece, mounting bracket for rear mounting on wall or machine with protection of optics hood Mounting kit b 0 piece, mounting bracket, adjustable lateral ais, onl in conjunction with mounting kit a (0) or b (0) Mounting kit 090 piece, mounting plate, adjustable longitudinal ais, onl in conjunction with mounting kit (090) Mounting kit 090 ead : female connector, M, -pin, straight, SICK-coded ead : open cable ends Cable: shielded, 0 m Etension cable S00 Mini Remote DOL-SSG0MEKM 00 ead : female connector, M, -pin, straight, SICK-coded ead : open cable ends Cable: shielded, m Etension cable S00 Mini Remote DOL-SSGMEKM 0 ead : female connector, M, -pin, straight, SICK-coded ead : open cable ends Cable: shielded, 0 m Etension cable S00 Mini Remote DOL-SSG0MEKM 0 ead : female connector, M, -pin, straight, SICK-coded ead : open cable ends Cable: shielded,. m Etension cable S00 Mini Remote DOL-SSGMEKM 0 ead : female connector, M, -pin, straight, SICK-coded ead : open cable ends Cable: shielded, m Etension cable S00 Mini Remote DOL-SSGM0EKM 08 ead : female connector, M, -pin, straight, SICK-coded ead : open cable ends Cable: shielded,. m Etension cable S00 Mini Remote DOL-SSGMEKM 09 ead : male connector, M8, -pin, straight ead : male connector, US-, straight Cable: PVC, unshielded, m DSL-8U0G0M0KM 0 ead : male connector, M8, -pin, straight ead : male connector, US-, straight Cable: PVC, unshielded, 0 m DSL-8U0G0M0KM 0 Mounting brackets and plates Plug connectors and cables 0-- ::0 Online data sheet Subject to change without notice 9
Online data sheet SICK at a glance SICK is one of the leading manufacturers of intelligent sensors and sensor solutions for industrial applications. unique range of products and services creates the perfect basis for controlling processes securel and efficientl, protecting individuals from accidents and preventing damage to the environment. We have etensive eperience in a wide range of industries and understand their processes and requirements. With intelligent sensors, we can deliver eactl what our customers need. In application centers in Europe, sia and North merica, sstem solutions are tested and optimied in accordance with customer specifications. ll this makes us a reliable supplier and development partner. Comprehensive services complete our offering: SICK LifeTime Services provide support throughout the machine life ccle and ensure safet and productivit. For us, that is Sensor Intelligence. Worldwide presence: Contacts and other locations www.sick.com SICK G Waldkirch German www.sick.com