Protoox 1553DT Kit (PC+ox) Hammond 1553DT soft-side plastic enclosure with battery compartment, packaged with a matching Protooard 2-hole per strip PC. www.usoard.com sales@busboard.com PS-MR-(KIT-1553DT)-001 Rev 4.00
Protooard-1553DT for 1553DT oxes prototyping board designed for the Hammond 1553DxT soft-sided handheld case with battery compartment. Features Protooard saves time! The PC is designed specifically for the Hammond 1553DxT box. No cutting is required. The mounting holes are present in the right spots. The convenient 2-hole Protooard pattern provides an easy way to connect parts while maximizing usable board area. Lead free etched copper PC with an anti-tarnish coating for easy soldering. PC Specifications High-quality FR4 glass epoxy board. Six 4-40 PC mounting screws provided. Single sided, 1oz/ft 2 copper PC 0.042" holes drilled on 0.1" centers PC Size 2.850 x 4.175 in. (72 x 106mm) Order Part# PR1553DT (for PC only) oard Layout (actual size) PR1553DT Prototyping oard shown with the Hammond 1553DKT box (box not included). To purchase the PC + ox together, order PS part# KIT-1553DT-K
PC Mechanical Dimensions Hammond 1553DxT Hand Held Case Features Note: The box is NOT included with PS part# PR1553DT. The box is included with part# KIT-1553DT-K. Soft-sided ergonomic hand held electronic case. ox Size 5.8 x 3.5 x 1.0 inches (147 x 89 x 26 mm) attery compartment for 2x or 9V batteries (battery clips included). Long life "three snap" battery door. 1 removable end panel (included). uilt-in PC standoffs. ox closed with self tapping screws (included). Recessed top for membrane display or keypad. Lap joint construction provides protection against dust accumulation and splashing water. lack/gray, lack/lack, Gray/Gray, Yellow, Red, and Translucent lue colors available. To order the box by itself, use Hammond part # s 1553DKT, 1553DGYT, 1553DKKT, 1553DTUKT, 1553DRDKT, 1553DYLKT See http://www.hammondmfg.com/1553.htm http://www.hammondmfg.com/1553colors.htm
Includes 4 clips for two batteries. Includes wired clip for 9V battery.
2013 usoard Prototype Systems Ltd.
2 1 Top View of ssembly 69.68 [2.743] SECTION - (Side View Inside ssembly) 19.50 [.768] (Inner ox Height) (P.C. oard) Detail View of PC oss (Located on Top and ottom Cover) 4.50 [.177] 147.24 [5.797] 130.68 [5.145] (Inlay Length) n 6.00 [.236] (Top and ottom ssem oss n) n 5.00 [.197] ottom Cover Front Panel 57.95 [2.281] (End Inaly Width) End View of ssembly.50 [.020] (Inlay Depth) Front Panel.46 [.018] (PC dist from end panel) 88.97 [3.503] ottom Cover SECTION - (Inside of ottom Cover) 59.95 [2.360] 3.66 [.144] (PC dist from inner wall) P.C. oard (Not Supplied) 80.98 [3.188] 68.93 (Inner ox Width at Center) [2.714] (Inner ox Width at End) Enclosures can be Factory Modified ( Milling, Drilling, Printing etc. ) Solid models of this enclosure available in STEP or IGES. Contact Factory mjm@hammondmfg.com NOTE Enclosure molded from GP S (UL94-H) plastic. Purchased assembly includes top and bottom cover, front plastic panel, battery door, battery spring clips, 9V adapter and 4 cover screws. Front/Rear Panel (Dashed Line Indicates Viewing rea) 14.57 [.573] (Viewing rea) 25.00 [.984] 65.55 [2.581] (Viewing rea) 69.01 [2.717] 17.80 [.701] 2.50 [.098] 67.32 [2.650] 140.24 [5.521] (Inner ox Length) Maximum P.C. oard Size 11.49 [.452] 30.14 [1.187] 46.04 [1.812] 22.03 [.867] R3.42 [.135] 106.80 [4.205] 45.89 [1.807] 5.46 [.215] P.C. oard (Not Supplied) 10.28 [.405] P.C oard ligned on PC osses n3.20 [.126] 62.75 [2.470] 73.67 [2.900] PRT NUMERS 1553D Enclosure lack Enclosure/Grey Over-mold Grey Enclosure/Grey Over-mold CCESSORIES Cover Screws (Pkg 100) [#4 x 5/8" self-tapping oval head (15.9mm)] P.C. oard Screws [#4 x 1/4" self-tapping (6.4mm)] elt or Pocket Clip 1553DKT 1553DGYT 1593MS100 (Silver) 1593MS100K (lack) 1593TS50 (Pkg 50) 1593TS100 (Pkg 100) 1599CLIP (lack) 1599CLIPGY (Grey) 1553D-T 2 1
Mouser Electronics uthorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: usoard Prototype Systems: KIT-1553DT-GY KIT-1553DT-K