Macrotron Systems, Inc. Flash Media Products Part Number Family: 2.5 PATA (IDE) SSD (High Performance Series) PA25SMXXXXXMXXMX & 1.8 PATA (IDE) SSD (High Performance Series) PA18SMXXXXXMXXMX Revision Description Issue Date Remarks 1.0 Initial Release May 06, 2010 1
THIS DOCUMENT IS PROVIDED AS IS WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. Macrotron Systems, Inc. disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in this document. No license, expressed or implied, by estoppels or otherwise, to any intellectual property rights is granted herein. *Third-party brands, names, and trademarks are the property of their respective owners. 2
Overview The Macrotron High Performance Series PATA (IDE) SSDs are the storage device based on NAND flash memory technology and the most advanced SM2235 Parallel ATA 4-channel NAND Flash controller. The Macrotron High Performance Series PATA (IDE) SSDs are available in 2.5 and 1.8 form factors, and comply with ATA standard interface. They are suitable for data storage media and code storage device for embedded system and boot disk. Macrotron s PATA (IDE) SSDs deliver the best in class performance and reliability in the market place today. SM2235 Controller Features Host Interface Features - Supports Ultra DMA Mode 0~6 - Compliant with ATA v.7 specifications - Supports SMART command set and ATA security command set NAND Flash Interface Features - 2 or 4 channels Flash interface - 8 chip-enabled pins per channel - Supports SLC/MLC of various Flash vendors - Supports 2K and 4K byte page SLC/MLC - Hardware BCH ECC detects/corrects up to 15-bit errors in 528 data - Supports global wear leveling - Programmable cycle time setting for different NAND Flash - In-System Programming (ISP) provides flexibility for new Flash and host compatibility support 3
Product Specifications SSD Model Capacity Form Factors Controller Flash Technology Connector Types Data Transfer Mode Performance Specifications Sustained Read Speed Sustained Write Speed Latency Specifications Read Write Latency Power On to Ready Supply Voltage Power Consumption Active Idle Industrial Temperature Operating Non-Operating Wide Temperature Operating Non-Operating Shock (Non-Operating) Vibration (Operating) Reliability MTBF ECC Data Retention Dimension 2.5 PATA (IDE) SSD 4GB ~ 128GB (SLC & MLC) 2.5 SSD SM2235 4-channel Flash Controller Supports SLC and MLC NAND Flash 44 pin IDE interface Ultra DMA Mode 0~6 87 MB/s (SLC) & 87 MB/s (MLC) 82 MB/s (SLC) & 45 MB/s (MLC) 85 us (TYP) 115 us (TYP) 1 s Vcc = 5.0V +/- 5% 2.0 W 0.5 W 0 C to 70 C -20 C to 80 C -40 C to 85 C -50 C to 95 C 1,500G (max) 20G peak, 10~2KHz with 3 axis 1,000,000 hours Supports BCH ECC up to 15-bit in 512 bytes 10 years 100 mm x 70 mm x 9.5 mm 1.8 PATA (IDE) SSD 64GB (SLC) & 128GB (MLC) 1.8 SSD SM2235 4-channel Flash Controller Supports SLC and MLC NAND FLash 44 pin IDE interface (ATA7) Ultra DMA Mode 0~6 87 MB/s (SLC) & 87 MB/s (MLC) 82 MB/s (SLC) & 45 MB/s (MLC) 85 us (TYP) 115 us (TYP) 1 s Vcc = 5.0V +/- 10% 1.25 W 0.5 W 0 C to 70 C -20 C to 80 C -40 C to 85 C -50 C to 95 C 100G or 9800m/s (max) 15G peak or 147m/s peak 1,000,000 hours Supports BCH ECC up to 15-bit in 512 bytes 10 years 70 mm x 60 mm x 6.5 mm 4
Physical Dimensions 2.5" PATA (IDE) SSD Drive (High Performance Series) Tolerance size: +/- 0.15mm 5
Physical Dimensions 1.8" PATA (IDE) SSD Drive (High Performance Series) Tolerance size: +/- 0.15mm 6
NAND FLASH BASED / PATA (IDE) SM2235 Controller Block Diagram Flash SSD Block Diagram 7
NAND FLASH BASED / SATA II Part Number and Ordering Information PA XX SM XXX X X M XX M X PATA Form Factor and Size: 25 = 2.5 inch 18 = 1.8 inch Controller: Silicon Motion Capacity 64G = 64GB 28G = 128GB N/A Temperature: I=Industrial Temp. (0~70 C) W=Wide Temp. (-40~85 C) Housing: M = Metal Housing Package/Brand: IA = Industrial Macrotron IO = Industrial OEM RA = Retail Macrotron RO = Retail OEM Manufacture: M = Macrotron Flash: S = SLC M = MLC 8