Interlock SensaGuard Non-Contact 440N RFID unique (high) or standard (low) coded actuators PLe Cat 4 per ISO 3849- (safety performance is maintained when connected in series) Flat pack and barrel (plastic housings) Heavy-duty stainless steel barrel models Standard, magnetic hold, and integrated latch versions IP69K washdown rating Assured ON 0 5 mm (depending on version) Type 4 interlocking device per ISO 49 with low or high coded RFID actuators Non-contact Machine Safeguarding with RFID Technology Featuring RFID technology for coding, inductive technology for sensing and combining a large sensing range with optimal operation and a generous tolerance to misalignment, SensaGuard switches offer a cost-effective solution that is ideally suited to a wide range of safety applications and is intended for use with all types of guard doors. Rectangular Flat Pack Version Integrated Latch Version Optional magnetic hold feature aids door stability and reduces nuisance tripping RFID coded security offers tamper resistant operation LED offers diagnostics for switch status, margin alignment, and fault finding Actuator Adjustable magnetic holding force Short circuit over voltage protection allows the switch to be reset Cable and M 8-pin quick disconnect pigtail simplifies installation and maintenance Sensor Interlock Presence Sensing Devices Access Control Relays Emergency Stop Devices Enabling Limit 5-8 5-5-7 5-8 5-33 5-34 5-35 5-36 5-4 5-4 5-43 5-44 5-45 5-46 5-47
Product Selection SensaGuard Non-Contact Type 8 mm plastic barrel/8 mm actuator 8 mm plastic barrel/30 mm actuator Assured Sensing Distance On: 5 mm (0.59 in.) Off: 5 mm (0.98 in.) On: 5 mm (0.98 in.) Off: 35 mm (.38 in.) Margin Indication Magnetic Hold Cable Connector Actuator Code Type 3 m 0 m 6 inch Pigtail, 8-pin Micro (M) Standard 440N-ZS6A 440N-ZS6B 440N-ZS6H 8 mm plastic 440N-ZU6A 440N-ZU6B 440N-ZU6H Standard 440N-ZS6A 440N-ZS6B 440N-ZS6H 30 mm plastic 440N-ZU6A 440N-ZU6B 440N-ZU6H 8 mm stainless steel barrel/8 mm actuator On: 0 mm (0.39 in.) Off: 0 mm (0.79 in.) Standard 440N-ZS7A 440N-ZS7B 440N-ZS7H 8 mm stainless steel 440N-ZU7A 440N-ZU7B 440N-ZU7H Plastic rectangular/ rectangular actuator On: 5 mm (0.59 in.) Off: 35 mm (.38 in.) Yes Yes Yes (9 N) Standard 440N-ZSSA 440N-ZSSB 440N-ZSSH Unique 440N-ZUSA 440N-ZUSB 440N-ZUSH Standard 440N-ZSSAN 440N-ZSSBN 440N-ZSSHN Unique 440N-ZUSAN 440N-ZUSBN 440N-ZUSHN Standard 440N-ZSSAN9 440N-ZSSBN9 440N-ZSSHN9 Unique 440N-ZUSAN9 440N-ZUSBN9 440N-ZUSHN9 Plastic housing with integrated latch On: Contact/latched Off: 35 mm (.38 in.) Adjustable 0 60 N Standard 440N-ZSS3PA 440N-ZSS3PB 440N-ZSS3PH Unique 440N-ZSU3PA 440N-ZSU3PB 440N-ZSU3PH For 5-pin micro (M) connector version, replace the H in the catalog number with J. Required Cordsets & Accessories Standards ISO 49, IEC 60947-5-3, IEC 6508, EN ISO 3849- Classification Functional Data Type 4 Interlocking Device per ISO 49 (Unique/ High and Standard/ Low Coding), PLe Cat 4 per ISO 3849- Visit http://literature.rockwellautomation.com/idc/groups/ literature/documents/sr/safety-sr00_-en-e.pdf culus Listed (UL 508), TÜV Certified, and CE Marked for all applicable directives www.rockwellautomation.com/certification/overview.page Cordset 889D-F8AB- Patchcord 889D-F8ABDM- 3 wired T-port wired shorting plug 898D-438Y-D8 898D-48U-DM Replace symbol with, 5, or 0 for standard cable lengths in meters. 3 Replace symbol with,, 3, 5, or 0 for standard lengths in meters. Note: For additional information, see Connection Systems (page 4-38). For more information on our complete family of interlock switch products, please visit: http://ab.rockwellautomation.com/ 5-9
Interlock Magnetically Coded Non-Contact 440N Non-contact actuation Magnetic coded sensing Small size Molded-in mounting brackets High tolerance to misalignment Designed for use with specified safety controllers Type 4 interlocking device per ISO 49 with low coded actuators Small Size, High Integrity With the increasing speed and complexity of applications, a simple magnetic switch may be insufficient to meet the increased risks, MCand MC magnetically coded non-contact switches incorporate several magnetically sensitive elements, which must be triggered in a particular sequence to operate correctly. The sensor with its molded-in brackets and diminutive size, is extremely versatile and simple to install. Diminutive size for versatility in installation Molded-in brackets for simple installation LED offers diagnostics for switch status IP67 washdown rating Magnetic coding requires several elements to be triggered in a particular sequence to operate IP69K washdown rating Cable and M, 4-pin quick disconnect versions Cable and M, 8-pin quick disconnect versions Interlock Presence Sensing Devices Access Control Relays Emergency Stop Devices Enabling Limit 5-0 5-5-7 5-8 5-33 5-34 5-35 5-36 5-4 5-4 5-43 5-44 5-45 5-46 5-47
Product Selection Magnetically Coded Non-Contact Type Operating Voltage/ Input Current Outputs Auxiliary Outputs Status Indicator Connection 4-pin micro (M) 440N-ZNRSC MC N.C. REEDS No 3 m cable 440N-ZNRSA 0 m cable 440N-ZNRSB 8-pin micro (M) 440N-ZWPH MC 4V DC, +0%/5%/ 50 ma max. N.C. Solid- State Relays x PNP, 0. A max.; Status: OFF (0V DC) Yes 3 m cable 440N-ZWPA 0 m cable 440N-ZWPB Standards Classification Functional Data ISO 49, IEC 60947-5-3, ISO 3849- when used with approved safety control Type 4 Interlocking Device with low coding per ISO 49 Visit http://literature.rockwellautomation.com/idc/groups/ literature/documents/sr/safety-sr00_-en-e.pdf CULus Listed, TÜV Certified, and CE Marked for all applicable directives www.rockwellautomation.com/certification/overview.page Sales Offices and Distributors Our network of sales offices and distributors offers exceptional knowledge and service to help you design, implement and support your automation investment. www.rockwellautomation.com/ sales-partners/overview.page Required Cordsets & Accessories Cordset 889D-F4AC- 889D-F8AB- Patchcord 889D-F4ACDM- 889D-F8ABDM- Distribution box 898D-4 3 LT-DM4 Shorting plug 898D-4LU-DM T-port 898D-43LY-D4 Replace symbol with, 5, or 0 for standard cable lengths in meters. Replace symbol with,, 3, 5, or 0 for standard lengths in meters. 3 Replace with 4 or 8 for number of ports available. Note: For additional information, see Connection Systems (page 4-38). For more information on our complete family of interlock switch products, please visit: http://ab.rockwellautomation.com/ 5-
Interlock Tongue Interlock 440K A full range of guard interlocking switches Holding forces up to 40 N Multiple actuator options Conduit or quick disconnect models Optional GD style metal head for increased robustness Type interlocking devices per ISO 49 with low coded tongue-shaped actuators A Complete Range of Guard Interlocking Solutions Trojan T5 Trojan 5 & 6 Elf Cadet MT-GD Dimensions [H x W x D] 75 x 3 x 5 mm (.95 x. x.05 in.) 95 x 3 x 5 mm (3.74 x.6 x.05 in.) 75 x 5 x 9 mm (.95 x 0.98 x.4 in.) 90.5 x 3 x 30.4 mm (3.56 x. x. in.) 6.5 x 38 x 40 mm (4.59 x.5 x.57 in.) Break Contact Force 30 N T5: N typical, max. 30 N T6: 0 N 6 N 5 N, 3, 40 N /Aux. Contacts N.C. N.C./ N.O. T5: N.C./ N.O. T6: 3 N.C./ N.O. N.C./ N.O. N.C. N.C./ N.O. 3 N.C. N.C./ N.O. 3 N.C./ N.O. N.C./ N.O. Material Plastic w/plastic or metal head (GD) Plastic w/plastic or metal head (GD) Plastic w/optional metal alignment guide Plastic w/optional metal alignment guide Metal Actuator Options Standard & fully flexible Standard, semi-flexible, & fully flexible Flat, 90, & semi-flexible Flat, 90, & semi-flexible Standard, fully flexible, & extended flat Four-contact models are available (Trojan 6). Interlock Presence Sensing Devices Access Control Relays Emergency Stop Devices Enabling Limit 5-5- 5-7 5-8 5-33 5-34 5-35 5-36 5-4 5-4 5-43 5-44 5-45 5-46 5-47
Product Selection Trojan T5 & Trojan 5 Standard Plastic Contact M0 Conduit Connector Type Auxiliary Contact Action Actuator Type M0 / in. NPT Adaptor Micro (M) 3 Trojan T5 standard N.C. Standard 440K-T303 440K-T67 440K-T307 Fully flexible 440K-T395 440K-T73 440K-T384 N.C. N.O. BBM Standard 440K-T305 440K-T68 440K-T386 Fully flexible 440K-T396 440K-T76 440K-T387 GD Standard 440K-T463 440K-T88 440K-T389 N.C. Trojan T5 GD Fully flexible 440K-T397 440K-T87 440K-T390 (metal head) GD Standard 440K-T398 440K-T84 440K-T39 N.C. N.O. BBM Fully flexible 440K-T399 440K-T83 440K-T393 Standard 440K-T090 440K-T0 440K-T05 Trojan 5 standard BBM Semi-flexible 440K-T0 440K-T03 440K-T06 Fully flexible 440K-T467 440K-T04 440K-T07 N.C. N.O. GD standard 440K-T336 440K-T 440K-T366 Trojan 5 GD (metal head) BBM Semi-flexible 440K-T337 440K-T 440K-T367 Fully flexible 440K-T338 440K-T3 440K-T368 Trojan 5 30 N BBM Standard 440K-T333 440K-T904 440K-T49 Four contact models are available (Trojan 6). Make before break (MBB) contact versions are also available. 3 Trojan T5 uses a 4-pin connector and Trojan 5 uses a 6-pin connector. Standards ISO 49, IEC 60947-5- Classification Type Interlocking Device per ISO 49 Functional Data Visit http://literature.rockwellautomation.com/idc/groups/ literature/documents/sr/safety-sr00_-en-e.pdf culus Listed, TÜV Certified, and CE Marked for all applicable directives www.rockwellautomation.com/certification/overview.page Outputs Thermal Current/ lth 0 A Switching Current @ Voltage 3 ma @ 8V DC, min. Operating Characteristics Operating Radius 75 mm (6.89 in.) [60 mm (.36 in.) with flexible actuator, min.] Mechanical Life,000,000 operations Required Cordsets & Accessories 4-pin micro (M) QD cordset 889D-F4AC- 4 6-pin micro (M) QD cordset 889R-F6ECA- 4 4-pin micro (M) QD patchcord 889D-F4ACDM- 5 6-pin micro (M) QD patchcord 889R-F6ECRM- 5 GD standard actuator 440G-A70 GD flat actuator 440K-A Fully flexible actuator 440K-A700 4 Use, 5, or 0 for standard cable lengths in meters. 5 Use,, 3, 5, or 0 for standard cable lengths in meters. For more information on our complete family of interlock switch products, please visit: http://ab.rockwellautomation.com/ 5-3
Interlock Product Selection Elf Miniature Plastic Contact M6 Conduit Connector Auxiliary Action Actuator Type M6 / in. NPT Adaptor 4-pin Micro (M) N.C. N.O. BBM 90 440K-E33040 440K-E33030 440K-E3305 Semi-flexible 440K-E33034 440K-E3303 440K-E33075 N.C. 90 440K-E3304 440K-E33045 440K-E3304 Semi-flexible 440K-E33046 440K-E33078 Cadet 3 Compact Plastic Contact Auxiliary Action 3 N.C. N.C. N.O. BBM M6 Conduit Connector Actuator Type M6 / in. NPT Adaptor 6-pin Micro (M) 90 440K-C097 440K-C057 440K-C09 Semi-flexible 440K-C06 440K-C09 90 440K-C06 440K-C058 440K-C067 Semi-flexible 440K-C074 440K-C088 Standards ISO 49 Classification Type Interlocking Device per ISO 49 Functional Data Visit http://literature.rockwellautomation.com/ idc/groups/literature/documents/sr/safetysr00_-en-e.pdf culus Listed, TÜV Certified, and CE Marked for all applicable directives www.rockwellautomation.com/certification/ overview.page Outputs Thermal Current/ lth 5 A (0 A if A600) Switching Current @ Voltage 3 ma @ 8V DC, min. Operating Characteristics Operating Radius 50 mm (5.90 in.) [60 mm (.36 in.) with semiflexible actuator, min.] Mechanical Life,000,000 operations Required Cordsets & Accessories 4-pin micro (M) QD cordset 889D-F4AC- 6-pin micro (M) QD cordset 889R-F6ECA- 4-pin micro (M) QD patchcord 889D-F4ACDM- 6-pin micro (M) QD patchcord 889R-F6ECRM- Flat actuator 3 440K-A04 90 actuator 3 440K-A006 Metal alignment guide with semi-flexible actuator Use, 5, or 0 for standard cable lengths in meters. Use,, 3, 5, or 0 for standard cable lengths in meters. 3 Not to be used with metal alignment guide. 440K-A030 Interlock Presence Sensing Devices Access Control Relays Emergency Stop Devices Enabling Limit 5-4 5-5-7 5-8 5-33 5-34 5-35 5-36 5-4 5-4 5-43 5-44 5-45 5-46 5-47
Product Selection MT-GD Metal Body Type MT-GD MT-GD latch release Contact Contact M0 Conduit Connector Auxiliary Action Actuator Type M0 / in. NPT Adaptor -pin (M3) 3 N.C. N.O. N.C. N.O. 3 N.C. N.O. N.C. N.O. BBM GD standard 440K-MT55074 440K-MT550 440K-MT55095 Fully flexible 440K-MT55075 440K-MT5509 440K-MT55096 GD standard 440K-MT55076 440K-MT5506 440K-MT55098 Fully flexible 440K-MT55077 440K-MT55087 440K-MT55099 GD standard 440K-MT55078 440K-MT5504 440K-MT55070 Fully flexible 440K-MT55079 440K-MT55045 440K-MT5503 GD standard 440K-MT55080 440K-MT55050 440K-MT5504 Fully flexible 440K-MT5508 440K-MT5505 440K-MT5505 Make before break (MBB) and snap acting contact versions are also available. Standards ISO 49, ISO 3849-, IEC 60947-5- Classification Type interlocking device per ISO 49 Functional Data Visit http://literature.rockwellautomation.com/idc/ groups/literature/documents/sr/safety-sr00_-en-e.pdf culus Listed, TÜV Certified, and CE Marked for all applicable directives www.rockwellautomation.com/certification/ overview.page Outputs Thermal Current/ lth 0 A Switching Current @ Voltage 3 ma @ 8V DC, min. Operating Characteristics Break Contact Force N (.35 lbf), min. Operating Radius 50 mm (5.90 in.) [60 mm (.36 in.) with GD kit, min.] Mechanical Life,000,000 operations Required Cordsets & Accessories -pin (M3) QD cordset 889M-FX9AE- GD standard actuator 440G-A70 GD flat actuator 440K-A Fully flexible actuator 440K-A700 Use, 5, or 0 for standard cable lengths in meters. Product Selection Tools Available online or for download, our tools help you access info while in the office or on the go. www.rockwellautomation.com/support/ selection.page For more information on our complete family of interlock switch products, please visit: http://ab.rockwellautomation.com/ 5-5
Interlock LZ Guard Locking 440G-LZ PLe Cat 4, SIL cl3 the highest level of safety for guard position and lock monitoring Solid-state OSSD outputs Standard (low) or unique (high) coded RFID actuators High holding force for partial body access applications Power-to-release and power-to-lock versions IP69K and hygienic design Type 4 interlocking device with guard locking per ISO 49 with low or high coded RFID actuators Auxiliary output versions: lock status or guard proximity Continuously monitored locking bolt drive mechanism High,300 N holding force PLe Cat 4, SIL cl3 the highest level of safety RFID unique (high) or standard (low) coded actuator QR code links to User Manual The Highest Level of The Allen-Bradley Guardmaster 440G-LZ is a guard locking switch designed for partial body access guards. Combining microprocessor technology with an RFID coded actuator, the 440G-LZ features a locking bolt drive mechanism that will only lock when the correct actuator is detected. The locking bolt is continuously monitored for correct insertion within the actuator. This extra functionality allows the 440G-LZ to be certified PLe Cat 4, SIL cl3 the highest level of safety for guard position and lock monitoring and it can be connected directly or in series with other PLe Cat 4 or SIL cl3 rated safety devices. Bright 70 wraparound LEDs for status and diagnostics Uses up to 60% less power than competitive products Choice of auxiliary output type: Lock status (locked or unlocked) or Guard (actuator) proximity Interlock Presence Sensing Devices Access Control Relays Emergency Stop Devices Enabling Limit 5-6 5-5-7 5-8 5-33 5-34 5-35 5-36 5-4 5-4 5-43 5-44 5-45 5-46 5-47
Product Selection 440G-LZ Guard Locking Connector Type Locking Type Actuator Type 3 m Lead 0 m Lead 6-in. Pigtail with M 8-pin QD Power-to-release Power-to-lock Standard (low level to EN/ISO 49:03) 440G-LZSSPRA 440G-LZSSPRB 440G-LZSSPRH Unique (high level to EN/ISO 49:03) 440G-LZSUPRA 440G-LZSUPRB 440G-LZSUPRH Standard (low level to EN/ISO 49:03) 440G-LZSSPLA 440G-LZSSPLB 440G-LZSSPLH Unique (high level to EN/ISO 49:03) 440G-LZSUPLA 440G-LZSUPLB 440G-LZSUPLH To select auxiliary output type, in front of last two letters in catalog number use P for lock status or T for guard proximity. Example: 440G-LZSSTRH. Connected Components Simpler, faster, cost-effective machine building. www.rockwellautomation.com/go/cc Standards ISO 49, IEC 60947-5-3, ISO 3849-, IEC 606 Classification Functional Power Supply Holding Force Fzh (ISO 49:03) Outputs Auxiliary Outputs Enclosure Type Rating Type 4 Interlocking Device with Guard Locking per ISO 49 with low (standard) and high (unique) coding per ISO 49 PLe Cat 4 per ISO 3849- and SIL cl3 per IEC 606 Visit http://literature.rockwellautomation.com/idc/groups/ literature/documents/sr/safety-sr00_-en-e.pdf culus Listed, TÜV Certified, and CE Marked for all applicable directives www.rockwellautomation.com/certification/overview.page 4V DC +0%/-5% Class SELV,300 N x PNP, 0. A max., Status: ON (+4V DC) x PNP, 0. A max., Status: OFF (0V DC) NEMA 3, 4X,, 3, IP66, IP67, IP69K Required Cordset & Accessories 8-pin micro (M) QD cordset 889D-F8AB- Standard power-to-release actuator 440G-LZASPR Unique power-to-release actuator 440G-LZAUPR Standard power-to-lock actuator 440G-LZASPL Unique power-to-lock actuator 440G-LZAUPL Actuator mounting bracket 440G-LZAM Switch body mounting bracket 440G-LZAM Use, 5, or 0 for standard cable lengths in meters. For more information on our complete family of interlock switch products, please visit: http://ab.rockwellautomation.com/ 5-7