NUTP8-LED/4 24V 4" Damp Label High Output LED Tape Light Section Source: 350 Lumens / 4W per Foot LEDs

Similar documents
NUTP8-16LED 24V 16' Damp Label High Output LED Tape Light Roll Source: 58W Watts Per Foot

NUTP4-LED/12 12V 12" Standard LED Tape Light Section Source: 1.5W LEDs

NUTP3 Series 24V RGB LED Tape Light (Color Changing) Source: 2.5 Watts Per Foot

NUTP8-LED (Amber Finish) NUTP8-WLED (White Finish) High Output LED Tape Light Section. Source: 350 Lumens / 4.2W per Foot LEDs

NUTP6-16LEDRGB 12V 16' RGB Color Changing LED Tape Light Roll Source: 40W LEDs

NUTP3-LEDRGB/6 24V 6" RGB LED Tape Light Section Source: 1.25W LEDs

NULB-48LED 48" Ultra-Low Profile Linear LED Lightbar Source: 16W LED

NULB-5 Pro90 Series Ultra-Low Profile Linear LED Lightbar Pro90 Source: 8.2W per foot LED

Lightbar 90+ NULB Series 24V Ultra-Low profile Linear LED Source: 4 Watts / 220 Lumen per foot

Source: 1.5 Watts Per Foot

NUTP3 Series 24V RGB LED Tape Light (Color Changing) Source: 2.5 Watts Per Foot ACCESSORIES LED DRIVERS ILLUMINATING THE FUTURE...

NUTP5 (Amber Tape) NUTP5-W (White Tape) 24V Hy-Brite LED Tape Light. Source: 200 Lumens per foot ILLUMINATING THE FUTURE...

NULB-5 Pro90 Series Ultra-Low Profile Linear LED Lightbar Pro90. Source: 8W / 400+ Lumens / 90+ CRI per foot LED. Page 1 of 7

Type. Project. Catalog No.

LED Tape Light Radiance Series

Type. Project. Catalog No.

FLEX DC 88 RGBA/W. Specification Sheet

Type. Project. Catalog No.

Type. Project. Catalog No.

LineLED Monochromatic 24V. Static color linear LED strip - 24 Volt. Technical information. Ordering code

LL Series. Linear LED strip - 24 VDC LM80 LL54 LL9 LL18. Technical information. Ordering code

LineLED LL Series. Linear LED strip - 24 VDC LM80 LL18. Technical information. Ordering code

0.59 W 0.09 H. No connector (will not work with LLX18X2) SECTION END LENGTH. wires (72 )*

A006 LuxStrip II 6 Line

DC12V SMD IR InfraRed (850nm/940nm) Tri-Chip Flexible LED Strips 60LEDs 14.4W Per Meter

Type. Project. Catalog No.

9008 LuxStrip II TM 6 Line

TOKISTAR LIGHTING INSTRUCTION MANUAL 24 VDC or 24 VAC

NT-2300 Series Dual Circuit Track System & Accessories

Light Distribution. LED Chip. Dimming. Mounting. Reel Lengths. Certifications. Operating Temp. Environment. Ordering Information

TOKISTAR LIGHTING INSTRUCTION MANUAL

9008 LuxStrip II 6 Line

Dynamic white linear LED strip - 24 VDC

Color-changing + White linear LED strip 24V

Linear Illumination system for wet locations

Bosca Dot Free Linear Illumination system

Westflex LED Neon Westflex LED Neon

Innovation Meets Illumination

1247 Norwood Avenue, Itasca, IL (800)

LED Design Lighting STANDARD Products Inc. All Rights Reserved. Rev. March 22, 2018.

Linear LED strip for wet locations - 24V

Catalog. Summer

Color temperature 2200K K K K K K 1.

C C - Clear F - Frosted. SA SA - Silver BK - Black BZ - Bronze WH - White. (BK,BZ,WH finishes will have an upcharge and require longer lead times)

LUMINARIS HD Static White

NT-300 & NT-2300 Series Single & Dual Circuit Track System & Accessories

SMD LED/m 12V/24V DC

SMD LED/m 12V DC

Mounting options Back-mount adjustable bracket. Side-mount adjustable bracket. right feed. Fixed mounting bracket Dimensions. left feed HO (LLXX18)

PRODUCT DATA SHEET. ColorBright Color Changing. RGB 150 Series. Year Warranty.

SINGLE COLOR TRULUX STANDARD TRULUX HIGH OUTPUT TRULUX SPEC GRADE. Description / Performance. Description / Performance. Description / Performance

Linear Illumination system for wet locations

Lighting 8/13 LEDge Light

105EquiLine Tape LED 12VDC FLEXIBLE LIGHTING

A-TRACK HOUSING FAMILY Semi-Custom to Meet Your Needs. Semi-Custom Offered in a variety of shapes and sizes and endless customizable options

Kendo S Linear Illumination System

TMU240095CL8xxA 44 LINEARHO DC MODULE, 2400mA MAX CURRENT

MO (LL36) HO (LL54) 74 lum/ft 149 lum/ft 209 lum/ft 291 lum/ft. 1.6 W/ft 3.2 W/ft 5.2 W/ft 6.5 W/ft. -30C to 50C -30C to 50C -30C to 50C -30C to 50C

Kendo L. Linear illumination system

LIGHTING S. Table of Contents. Lighting Kimball Surfaces & Storage. Price List Effective Dates: Pricing Revision

Linear Illumination System

LED LIGHTING SELECTIONS

Linear LED strip - 24 VDC

Product Description. Quick Spec. Fully Dimmable: Voltage: Total Wattage: Beam Angle: Yes 24V DC 24W 120º

WW2S. Type. Project OUTDOOR LIGHTING LED WALL WASHERS. Catalog No. WW2S18 WW2S24 WW2S36 WW2S48

with fixed mounting bracket. Maximum system length In series

TABLE OF CONTENTS LEGEND. 1K Under Cabinet. 3K Under Cabinet. Slimstick Under Cabinet WAFER LED SKY LED WRAP LED DIVERSE LED COVE LED.

SAVE THESE INSTRUCTIONS

MODA COVE INTERIOR DYNAMIC WARM PRODUCT GUIDE. Client: Project Name: MODA Contact: Quantity: Type: PO#: Notes:

Product Description. Quick Spec. Fully Dimmable: Voltage: Total Wattage: Beam Angle: Yes 24V DC 72W 120º

MODA COVE INTERIOR RGB PRODUCT GUIDE. Client: Project Name: MODA Contact: Quantity: Type: PO#: Notes:

LED Lighting. Typical LED Light Output: LED Wattage. Lumens/output. Approximate Incandescent Equivalent

Linear Illumination system for wet locations

Product Description. Quick Spec. Fully Dimmable: Voltage: Total Wattage: Beam Angle: Yes 24V DC 36W 120º

Suspended LED closet lighting

Kendo M Wet Graze Linear grazing system

MODA COVE EXTERIOR DYNAMIC WARM

Compact, Low Profile High Rendering, 100% Diffusion

High-tech LED lighting system for interior architecture

LED T8 EXTERNAL DRIVER EXTERNAL DIMMABLE T8 PLASTIC SERIES UL TYPE-C

TLT Tapelight Series 12VDC Damp Location RGB Flexible Tapelight

Discontinued Contact Fulham for availability. Not for use in new designs.

TOKISTAR LIGHTING INSTRUCTION MANUAL. Advantage XF Series

mws-sn monorail wall standoff (8) MWS-SN Monorail Wall Standoff Order seperate from Kit: (4) MW-REW-SN Rebel Fixture for Monorail Wall

Runda Closet rod Suspended LED closet lighting

Fixed clip profile. No clip profile. Maximum system length In series LENS MOUNTING FINISH. HF - Half-Frosted

Pictured: RibbonLyte SP K. ACOLYTE LED 251 West 30th St, Suite 12E New York, NY

SUN3 LED UPLIGHT OR STEP LIGHT - INDOOR/OUTDOOR

LED RIBBON TAPE

Recessed linear illumination system

SignBOX II. Retrofit Guide for (X)WS201 and (X)WD201

MODA MINI COVE INTERIOR RGB SPECIFICATION. Project Name: Client: MODA Contact: Quantity: PO#: Type: Notes:

MODA COVE INTERIOR DYNAMIC WHITE PRODUCT GUIDE. Client: Project Name: MODA Contact: Quantity: Type: PO#: Notes:

STATIC WHITE RIBBONLYTE

WARNING. General Information

Catalog Supplement. New product supplement to be used in conjunction with our 92-page Master Catalog. And much more inside... FEATURED NEW PRODUCTS:

Diffuser Color (when not illuminated) Light amber hue

*Max split can be split more than once, without exceeding the max single run in each leg.

LineLED Wet IP 67 rated Linear LED strip - 24V

Flexible Top Light 270. Features and Benefits.

Transcription:

NUTP8-LED/4 24V Damp Label High Output LED Tape Light Section Source: 350 Lumens / 4W per Foot LEDs PRODUT DESRIPTION High Output LED Tape Light has three times the light output of our standard tape, and is a perfect solution for your LED linear lighting needs. Very low profile High Output LED Tape is great for use in cove lighting, architectural enhancements, under cabinet or many more discreet locations. Each roll comes with (10) 12" sections linked together. Features vailable in 10' roll, 12" section, or section 350 lumens per foot with 4200K T Separable every 12", easily disconnected and connected without soldering Field cuttable every or 6 LEDs Easy to install; pre-applied 3M tape or 15 acrylic mounting clips (included with roll) 6 available colors: Blue, Green, Red, Yellow (mber), ool White (4200K), Warm White (3000K) culus Listed for Damp Locations Exceeds Title 24 high efficacy requirements No soldering or additional wiring is required No flicker delay or warm up like compact fluorescent products No UV light or infrared wavelengths Three Year Limited Warranty onstruction The tape can be cut every 6 LEDs at marked intervals, cutting does not effect circuit. LED Tape Light is also separable every 12", simply separate pieces as this eliminates soldering when using partial rolls. mounting Each Tape Light section comes with pre-applied 3M adhesive tape for simple installation. n optional aluminum channel or clear acrylic clips are available. LIMITTIONS Not rated or warranted for enclosure applications No singular run to exceed 10' ELETRIL Voltage: 24V D Power onsumption: 4 Watts per foot Lumens: Up to 350 Lumens per foot Light Source: 6 LEDs Operating Temperature: -13ºF to 140ºF (-25º to 60º) Life Expectancy: 50,000 Hours Maximum Run Length: 10' on a single run (96W and 100W Drivers rated for 20' total but limited to 10' max per single run [i.e. 2 runs of 10') Labels and Warranty culus Listed for Damp Location IP44 Rated Title 24 ompliant alifornia Energy ommission Three Year Warranty 2008 committed to GREEN 24V Damp Label High Output LED Tape Light Section NUTP8-LED30/4: 24V High Output Damp Label LED Tape Light Section, 3000K NUTP8-LED42/4: 24V High Output Damp Label LED Tape Light Section, 4200K NUTP8-LEDB/4: 24V High Output Damp Label LED Tape Light Section, Blue NUTP8-LEDG/4: 24V High Output Damp Label LED Tape Light Section, Green NUTP8-LEDR/4: 24V High Output Damp Label LED Tape Light Section, Red NUTP8-LEDY/4: 24V High Output Damp Label LED Tape Light Section, Yellow (mber) Type Project atalog No. Lamp/Wattage Dimensions 0.07" 0.6" ESSORIES Item Number NHO-602 NHO-606 NHO-618 NHO-636 NHO-672 NHO-600 NHO-601 NTHR-685 NTL-403 NTHR-680 NHO-609 NHO-611 LED DRIVERS Length: Width: 0.6" Depth: 0.07" Description 2" Interconnection able 6" Interconnection able 18" Interconnection able 36" Interconnection able 72" Interconnection able "Y" Splitter able "X" Splitter able lear crylic Mounting lips (Pack of 15) End ap 4' luminum hannel 12" 24V Power Line Interconnector 11" 24V Power Line Interconnector with Switch HRDWIRE DRIVERS Item Number Description NTL-530HW 24V 30W lass II Hardwired LED Driver (Requires NUSP-JBox or NR-6035) NTL-560HW 24V 60W lass II Hardwired LED Driver (Requires NUSP-JBox or NR-6035) NTL-5100HW 24V 100W lass II Hardwired LED Driver NMT-48/242D1 120V/24V 48W Dimmable lass II Remote Hardwire Magnetic Driver w/ Regulator NMT-48/242D2 277V/24V 48W Dimmable lass II Remote Hardwire Magnetic Driver w/ Regulator NMT-96/242D1 120V/24V 96W Dimmable lass II Remote Hardwire Magnetic Driver w/ Regulator NMT-96/242D2 277V/24V 96W Dimmable lass II Remote Hardwire Magnetic Driver w/ Regulator NMT-303/242D1 120V/24V 300W Dimmable lass II Remote Hardwire Magnetic Driver w/regulator NMT-303/242D2 277V/24V 300W Dimmable lass II Remote Hardwire Magnetic Driver w/regulator PLUG-IN DRIVERS NTL-524 24V 24W Direct Plug-In LED Driver NTL-545 24V 45W Direct Plug-In LED Driver NTL-596 24V 96W lass II Plug-In Electronic LED Driver DRIVER ESSORIES NLTL-10 Replacement 10' Power Line onnector for NMT Series & NTL-5100HW NLTL-30 Replacement 30' Power Line onnector for NMT Series & NTL-5100HW NTL-415 Low Voltage Splice Box NR-125/6 6" Extension ord for NTL-530HW & NTL-560HW NR-125/12 12" Extension ord for NTL-530HW & NTL-560HW NR-125/18 18" Extension ord for NTL-530HW & NTL-560HW NR-125/72 72" Extension ord for NTL-530HW & NTL-560HW NR-6035W/6 6' ord and Plug for NTL-530HW & NTL-560HW NR-6035W/10 10' ord and Plug for NTL-530HW & NTL-560HW NUSP-JBox Junction Box required for hardwiring NTL-530HW & NTL-560HW 6505 Gayhart St., ommerce, 90040 Phone: 800.686.6672 FX: 800.500.9955 e-mail: nora@noralighting.com Page 1 of 5

High Output LED Tape Light Optional ccessories Interconnection able The interconnection cables allow for linking of any tape lights in any direction or extension of power line interconnectors. The arrow on the interconnection cable must always be facing upward to maintain polarity. Interconnection cables may be joined together for custom lengths. lear crylic Mounting lips (Pack of 15) Used to mount tape light to surface, includes mounting screws. Power Line Interconnector To connect a Tape Light run directly to LED Driver. 12" NHO-602: 2" Interconnection able NHO-606: 6" Interconnection able NHO-618: 18" Interconnection able NHO-636: 36" Interconnection able NHO-672: 72" Interconnection able "Y" Splitter able Splits connection from one tape light or driver into two separate tape lights. NTHR-685: lear crylic Mounting lips (Pack of 15) End ap Used to cover open end of Tape Light. NHO-609: 12" 24V Power Line Interconnector Power Line Interconnector with Switch llows for individual switching on any Tape Light run. onnects a Tape Light run directly to LED Driver. 0.75" 1.38" 3" 0.38" 0.5" 0.63" NHO-600: "Y" Splitter able NTL-403: End ap NHO-611: 11" Power Line Interconnector w/switch "X" Splitter able Splits connection from one tape light or driver into three separate tape lights. luminum hannel Used to mount tape light to various surfaces. Tape Light snaps into the channel. Field uttable. Recommended for most installations. 0.25" 0.69" 3" 48" NHO-601: "X" Splitter able NTHR-680: 4' luminum hannel 6505 Gayhart St., ommerce, 90040 Phone: 800.686.6672 FX: 800.500.9955 e-mail: nora@noralighting.com Page 2 of 5

24V High Output LED Tape Light Drivers 30W 24V lass II Hardwire Electronic LED Driver llows hardwiring Tape Light run by using NUSP-JBox. an also be converted into direct plug-in driver by using NR-6035. Requires power 24V Direct Plug-In LED Drivers llows direct connection a wall outlet with 6' cord and plug. Requires power line interconnection cable. Non-Dimmable. 1.75" 1.5" 3.75" 300W 24V lass II Dimmable Hardwire LED Driver Includes three 100W breakers, which allows hardwiring three Tape Light runs and dimming with Magnetic Low Voltage Dimmer. Includes (3) 10' power line connector (NLTL-10). Requires power line interconnection cable. Manual reset thermal circuit - secondary side. Integral regulator for constant current and voltage. an be mounted 30' from start of run. 1.25" 1.75" 5.63" 4.43" 8.43" 14.25" NTL-530HW: 24V 30W lass II Hardwire Driver 60W 24V lass II Hardwire Electronic LED Driver llows hardwiring Tape Light run by using NUSP-JBox. an also be converted into direct plug-in driver by using NR-6035. Requires power NTL-524: 24V 24W Direct Plug-In LED Driver NTL-545: 24V 45W Direct Plug-In LED Driver 96W 24V Direct Plug-In LED Driver llows direct connection a wall outlet with 5' cord and plug and 4 power line connector. Requires power NMT-303/242D1: 120V/24V 300W 2 Dimm. Driver NMT-303/242D2: 277V/24V 300W 2 Dimm. Driver 5.5" 2.25" 2.25" 2.5" 6" 1.25" NTL-560HW: 24V 60W lass II Hardwire Driver 100W 24V lass II Hardwire Electronic LED Driver llows hardwiring Tape Light run. Includes 10' power line connector (NLTL-10). Requires power NTL-596: 24V 96W lass II Dimmable Driver 24V lass II Dimmable Hardwire LED Driver llows hardwiring Tape Light run and dimming with Magnetic Low Voltage Dimmer. Includes 10' power line connector (NLTL-10). Requires power line interconnection cable. Manual reset thermal circuit - secondary side. Integral regulator for constant current and voltage. an be mounted 30' from start of run. 11.25" 11.25" 3.37" NTL-5100HW: 24V 100W 2 Hardwire Driver 3.37" NMT-48/242D1: 120V/24V 48W 2 Dimm. Driver NMT-48/242D2: 277V/24V 48W 2 Dimm. Driver NMT-96/242D1: 120V/24V 96W 2 Dimm. Driver NMT-96/242D2: 277V/24V 96W 2 Dimm. Driver 6505 Gayhart St., ommerce, 90040 Phone: 800.686.6672 FX: 800.500.9955 e-mail: nora@noralighting.com Page 3 of 5

24V High Output LED Tape Light Drivers ccessories Replacement Power Line onnector For use with NMT Series and NTL-5100HW. Replaces included 10' lead wire, to allow for 30' or less length between Tape Light run and LED Driver. ord and Plug for NTL-530HW or NTL-560HW Used to convert NTL-530HW or NTL-560HW into a direct plug-in driver. NLTL-10: 10' 24V Power Line onnector NLTL-30: 30' 24V Power Line onnector Low Voltage Splice Box Use to join Romex low voltage lead to power line connector. NR-6035W/6: 6' ord and Plug NR-6035W/10: 10' ord and Plug Junction Box for Hardwiring Required for hardwiring NTL-530HW or NTL-560HW. an be used to feed to separate runs. ccepts Romex. 1.5 0.8" 2.3" 2.75" 4.25" NTL-415: Low Voltage Splice Box NUSP-JBox: Junction Box for Hardwiring Extension ord for NTL-530HW or NTL-560HW Used to extend length between NUSP-JBox and NTL-530HW or NTL-560HW. an be joined together to create custom lengths. NR-125/6: 6" Flexible Extension ord NR-125/12: 12" Flexible Extension ord NR-125/18: 18" Flexible Extension ord NR-125/72: 72" Flexible Extension ord 6505 Gayhart St., ommerce, 90040 Phone: 800.686.6672 FX: 800.500.9955 e-mail: nora@noralighting.com Page 4 of 5

Sample Layouts E B 5 D 5 (10 Max on a Single Run). NUTP8-10LED 10' LED Tape Light Roll (3-5' Segments) B. NHO-602 NHO-606 NHO-618 2" Interconnection able 6" Interconnection able 18" Interconnection able. NHO-601 "X" Splitter able D. NHO-609 12" Power Line Interconnector E. NMT-48/242D1 24V 48W Magnetic LED Driver. NUTP8-LED/12 (10) 12" LED Tape Light Sections B. NUTP8-LED/4 (6) LED Tape Light Sections. NHO-600 "Y" Splitter able D. NHO-602 NHO-606 NHO-618 2" Interconnection able 6" Interconnection able 18" Interconnection able E. NHO-600 "X" Splitter able F. NHO-609 12" Power Line Interconnector G. NTL-560HW 60W lass II Hardwire LED Driver H. NR-6035W/6 Flexible 6' Power ord H F E G B D D B B B B B 6505 Gayhart St., ommerce, 90040 Phone: 800.686.6672 FX: 800.500.9955 e-mail: nora@noralighting.com Page 5 of 5