CA IMS Tools 18.0 / Chorus 4.0 for IMS Tools 1 CA RS 1703 Service List Description Type 18.0 RO93914 CHA DOES NOT CONVERT OLD LOG RECORD STCK TIMES CORRECTLY PTF RO94193 ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY PTF RO94194 ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY PTF RO94311 LOOP IN RELOAD OF DEDB WITH SDEP=SCAN ** PRP ** RO94498 ABEND S07C-04 IN INITIATOR USING PSEUDO-ULU ENVIRONMENT PTF RO94519 RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS PTF RO94520 RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS PTF The CA RS 1703 service count for this release is 7
CA IMS Tools 2 CA RS 1703 Service List for CCHAI00 FMID Service Description Type CCHAI00 RO93914 CHA DOES NOT CONVERT OLD LOG RECORD STCK TIMES CORRECTLY PTF The CA RS 1703 service count for this FMID is 1
CA IMS Tools 3 CA RS 1703 Service List for CIDAI00 FMID Service Description Type CIDAI00 RO94193 ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY PTF RO94519 RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS PTF The CA RS 1703 service count for this FMID is 2
CA IMS Tools 4 CA RS 1703 Service List for CIDOI00 FMID Service Description Type CIDOI00 RO94311 LOOP IN RELOAD OF DEDB WITH SDEP=SCAN ** PRP ** The CA RS 1703 service count for this FMID is 1
CA IMS Tools 5 CA RS 1703 Service List for CITKI00 FMID Service Description Type CITKI00 RO94194 ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY PTF RO94498 ABEND S07C-04 IN INITIATOR USING PSEUDO-ULU ENVIRONMENT PTF RO94520 RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS PTF The CA RS 1703 service count for this FMID is 3
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 6 CA RS 1703 - PTF RO93914 18.0 RO93914 RO93914 M.C.S. ENTRIES = ++PTF (RO93914) CHA DOES NOT CONVERT OLD LOG RECORD STCK TIMES CORRECTLY Problem Description: The CA High Performance Recovery for IMS for z/os component Change Accumulation (CHA) can incorrectly filter out log records when dealing with logs that are from a time where the system leap second offset (CVTLSO) was different than the current value. The solution is to adjust the time value according to a table of date/times when leap seconds were added in the past. Symptoms: There are many ways the change accumulation or recovery can fail. If for example one were to recover a database after an OLR with log data: CHA7601E IMAGE COPY IS MISSING AND FORWARD RECOVERY NOT SPECIFIED, DBD dbd1 CHA1201I SORT TASK FOR CHANGE ACCUMULATION GROUP CAGRP1 ENDED It is also possible that the recovery would finish with completion code 0, but subsequent pointer checking or database use can result in errors. Impact: Low. This is not something that would normally happen in a production environment. This problem can occur on a test system where older regression tests are using recovery assets from the past that are 'frozen in time'. The leap second offset in CVTLSO is only adjusted very slightly every few years, and so the problem only occurs when there is a big gap between the current time and the original time the asset was saved. Circumvention: None. PRODUCT(S) AFFECTED: CA High Performance Recovery Version 18.0 CA High Performance Recovery Version 19.0 HPR 280 Copyright (C) 2017 CA. All rights reserved. R00288-I180-SP1 DESC(CHA DOES NOT CONVERT OLD LOG RECORD STCK TIMES CORRECTLY). FMID (CCHAI00) PRE ( RO73408 RO75665 RO76327 RO76743 RO77310 RO81662 ) SUP ( RO87116 TR87116 TR93914 )
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 7 CA RS 1703 - PTF RO94193 18.0 RO94193 RO94193 M.C.S. ENTRIES = ++PTF (RO94193) ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY Database Analyzer for IMS for z/os PROBLEM DESCRIPTION: When CA Database Analyzer for IMS for z/os (DBA) is invoked from CA High Performance Recovery for IMS for z/os (HPR) FUNCTION=RECOVER via parameters CHECK=Y and COPY=Y and DBA runs for at least two DSGs in this step then an abend S0C4 will occur. SYMPTOMS: The job fails with the following the message: IDI1300E A S0C4 RC=00000011 ABEND OCCURRED (MODULE DBAANIB, SUFFIX(0), HEX OFFSET 0E3A, PSW-R12 ). IMPACT: Database is partially recovered. DBA reports are not complete. CIRCUMVENTION: Running DBA in a separate job step will succeed. PRODUCT(S) AFFECTED: CA Database Analyzer Version 18.0 CA Database Analyzer Version 19.0 DBA 495 Copyright (C) 2017 CA. All rights reserved. R00289-I180-SP1 DESC(ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY). FMID (CIDAI00) PRE ( RO79628 RO86702 RO87604 RO90589 ) SUP ( TR94193 ) ++IF FMID(CITKI00) REQ(RO94194 ).
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 8 CA RS 1703 - PTF RO94194 18.0 RO94194 RO94194 M.C.S. ENTRIES = ++PTF (RO94194) ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY Database Analyzer for IMS for z/os PROBLEM DESCRIPTION: When CA Database Analyzer for IMS for z/os (DBA) is invoked from CA High Performance Recovery for IMS for z/os (HPR) FUNCTION=RECOVER via parameters CHECK=Y and COPY=Y and DBA runs for at least two DSGs in this step then an abend S0C4 will occur. SYMPTOMS: The job fails with the following the message: IDI1300E A S0C4 RC=00000011 ABEND OCCURRED (MODULE DBAANIB, SUFFIX(0), HEX OFFSET 0E3A, PSW-R12 ). IMPACT: Database is partially recovered. DBA reports are not complete. CIRCUMVENTION: Running DBA in a separate job step will succeed. PRODUCT(S) AFFECTED: CA Database Analyzer Version 18.0 CA Database Analyzer Version 19.0 DBA 495 Copyright (C) 2017 CA. All rights reserved. R00289-I180-SP1 DESC(ABEND S0C4 IN DBAANIB0 UNDER DBCOPY UNDER RECOVERY). FMID (CITKI00) SUP ( TR94194 ) ++IF FMID(CIDAI00) REQ(RO94193 ).
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 9 CA RS 1703 - PTF RO94311 18.0 RO94311 RO94311 M.C.S. ENTRIES = ++PTF (RO94311) LOOP IN RELOAD OF DEDB WITH SDEP=SCAN PROBLEM DESCRIPTION: CA Database Organizer for IMS for z/os (DBO) may end up in an endless loop during batch reload function of a DEDB database when SDEP=SCAN is specified. This can occur after maintenance is applied. The r18 maintenance PTF is RO91886. This PTF was placed in-error. SYMPTOMS: The reload job goes into a loop using CPU and producing no I/O. IMPACT: Batch reload function is unusable for a DEDB databases when reloading Sequential Dependent Segments from a DBOSCAN file via SDEP=SCAN keyword. CIRCUMVENTION: Perform DBO batch unload and reload with SDEP=ALL. DBO 1094 Copyright (C) 2017 CA. All rights reserved. R00290-I180-SP1 DESC(LOOP IN RELOAD OF DEDB WITH SDEP=SCAN). FMID (CIDOI00) PRE ( RO75252 RO75669 RO77115 RO78414 RO79629 RO80014 RO81033 RO85782 RO88005 RO88763 RO91886 RO92228 ) SUP ( AR91886 RO74270 RO91080 TR74270 TR91080 TR94311 )
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 10 CA RS 1703 - PTF RO94498 18.0 RO94498 RO94498 M.C.S. ENTRIES = ++PTF (RO94498) ABEND S07C-04 IN INITIATOR USING PSEUDO-ULU ENVIRONMENT CA Common Component for IMS for z/os PROBLEM DESCRIPTION: When running CA Database Management for IMS for z/os batch utilities, an ABEND S07C-04 can occur in the initiator when the pseudo-ulu environment is active. The pseudo-ulu environment is often established by the tools when it needs to simulate an IMS environment to call exits, such as to compress/decompress segments or when sparse exits are used. SYMPTOMS: The job output is usually not available when the initiator crashes. If you observe the job as it is running, the following message indicates that the pseudo-ulu environment is established: ITKF000I PSEUDO ULU REGION INITIALIZATION COMPLETED FOR DATABASE xxxx If you set a SLIP trap for the S07C, it will shows that there were recursive S0C4s before the S07C. The system log will show the following messages: $HASP310 jobname TERMINATED AT END OF MEMORY IEF402I INIT FAILED IN ADDRESS SPACE xxxx SYSTEM ABEND S07C - REASON CODE 04 IMPACT: The batch job comes to an abrupt end. CIRCUMVENTION: Add the following DD to the step to force the use of an IMS ULU: //IMSULU DD DUMMY PRODUCT(S) AFFECTED: IMS Toolkit Common Component Version 16.0 IMS Toolkit Common Component Version 18.0 IMS Toolkit Common Component Version 19.0 COM 493 Copyright (C) 2017 CA. All rights reserved. R00291-I180-SP1 DESC(ABEND S07C-04 IN INITIATOR USING PSEUDO-ULU ENVIRONMENT). FMID (CITKI00) SUP ( TR94498 )
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 11 CA RS 1703 - PTF RO94519 18.0 RO94519 RO94519 M.C.S. ENTRIES = ++PTF (RO94519) RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS Database Analyzer for IMS for z/os PROBLEM DESCRIPTION: The Randomizer Analysis Program (RAP) component of the Database Analyzer for IMS for z/os (DBA) product is missing the randomizer name in the reports file generated by the analysis of a randomizer. SYMPTOMS: The RAPRPTS and RAPERROR datasets headings will show: DBD NAME: dbdname / DD NAME : dbdname IMPACT: The reports are less useful without the randomizer name. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: CA Database Analyzer Version 16.0 CA Database Analyzer Version 18.0 CA Database Analyzer Version 19.0 DBA 497 Copyright (C) 2017 CA. All rights reserved. R00292-I180-SP1 DESC(RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS). FMID (CIDAI00) PRE ( RO75668 RO82443 RO92227 RO94193 ) SUP ( TR94519 ) ++IF FMID(CITKI00) REQ(RO94520 ).
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 12 CA RS 1703 - PTF RO94520 18.0 RO94520 RO94520 M.C.S. ENTRIES = ++PTF (RO94520) RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS Database Analyzer for IMS for z/os PROBLEM DESCRIPTION: The Randomizer Analysis Program (RAP) component of the Database Analyzer for IMS for z/os (DBA) product is missing the randomizer name in the reports file generated by the analysis of a randomizer. SYMPTOMS: The RAPRPTS and RAPERROR datasets headings will show: DBD NAME: dbdname / DD NAME : dbdname IMPACT: The reports are less useful without the randomizer name. CIRCUMVENTION: None. PRODUCT(S) AFFECTED: CA Database Analyzer Version 16.0 CA Database Analyzer Version 18.0 CA Database Analyzer Version 19.0 DBA 497 Copyright (C) 2017 CA. All rights reserved. R00292-I180-SP1 DESC(RANDOMIZER NAME MISSING FROM RAPRPTS AND RAPERROR HEADINGS). FMID (CITKI00) PRE ( RO76331 RO84150 ) SUP ( TR94520 ) ++IF FMID(CIDAI00) REQ(RO92227 RO94193 RO94519 ).
CA IMS Tools 18.0 (Includes Chorus 4.0 for IMS Tools PTF's) 13 CA RS 1703 Product/Component Listing Product Family Product Release DB2 Tools CA SNAPSHOT GENERAL SERVICES FOR DB2 18.00.00 IMSTOOLS CA COMPRESS DATA COMPRESSION FOR IMS 18.00.00 CA DATABASE ANALYZER 18.00.00 CA DATABASE COPIER 18.00.00 CA DATABASE ORGANIZER 18.00.00 CA HIGH PERFORMANCE RECOVERY 18.00.00 CA MAINFRAME CONFIGURATION MANAGER 18.00.00 CA MAINFRAME EXTENDED TERMINAL MANAGER 18.00.00 CA MAINFRAME PROGRAM RESTART MANAGER 18.00.00 CA SECONDARY INDEX 18.00.00 CA SECONDARY INDEX BUILDER 18.00.00 IMS CHANGE ACCUMULATION 18.00.00 IMS TOOLKIT COMMON COMPONENT 18.00.00 IMS TOOLKIT STARTED TASK COMPONENT 18.00.00 CA CHORUS FOR IMS TOOLS 04.00.00 The CA RS 1703 Product/Component Count for this release is 15