CiA GmbH Turisme de Barcelona/L.Bertran 2 nd international Mobile Machine Control (MMC) conference Meistersingerhalle, Nuremberg (Germany) June 09-10, 2015 Sponsor: Softing Automotive www.can-cia.org
Welcome to Nuremberg Conference location Meistersingerhalle Nuremberg Muenchener Str. 21 DE-90478 Nuremberg www.meistersingerhalle.nuernberg.de The 2 nd international Mobile Machine Control (MMC) conference is going to take place in Nuremberg (Germany) on June 9 and 10, 2015. Topics such as cloud diagnostic and functional safety are on the conference agenda as well as system design and code generation. Of course, communication technology is also an important topic: One session discusses Ethernet solutions and another one deals with CAN FD, the next generation of CAN networks. The conference addresses system designers of agriculture, construction, forestry, and mining machines. In addition, engineers developing mobile robots may be interested in this event. Of course, the supplying industry is invited. The MMC is a platform for discussions and networking with other experts from the mobile machine industries. The accompanying tabletop exhibition offers a platform for discussions and networking with other international experts from related work fields (e.g. CANopen, Isobus, J1939). Holger Zeltwanger MMC Program Committee Registration The registration fee includes a copy of the MMC proceedings. Speakers/Co-speakers Speakers may attend the conference free of charge. Please note that co-speakers are not registered automatically. If they do register, they pay a reduced fee. Table-top exhibition Access to the table-top exhibition is free of charge to everyone. Conference language Please note that the conference is held in English language. Program committee Klaus Gnahm, Sensor-Technik Wiedemann Alexander Holler, Inter Control Peter Subke, Softing Automotive Electronics Holger Zeltwanger, CAN in Automation Cancelations The fee minus 50 Euro handling will be refunded if the cancelation was received by May 29, 2015. For cancelations no refunds will be made after this date. Registration Please register either online at www.can-cia.org or by faxing the registration form on the back.
Tuesday, June 09, 2015 Tuesday, June 09, 2015 09:00 10:00 10.30 Registration of participants Session I: System design Chair: Alexander Holler (Inter Control) Open source software for automation and other industries n.n. Improved management of CANopen-based distributed control systems Dr. Heiki Saha (TKE) Session III: Diagnostic Chair: Peter Subke (Softing Automotive Electronics) OBD concept as the core for a successful stage IV application Jens Schlenker, Frank Reuß (HJS Emission Technology) Intelligent diagnostic analyzer (IDA) - Introducing machine intelligence in diagnostics Ram Kumar Arunchachalam, Kapil G Krishnan (VE Commercial Vehicles) 14:00 14:30 11:00 15:00 Session II: Network technology Chair: Uwe Koppe (MicroControl) Session IV: CAN FD Chair: Klaus Gnahm (STW) 11:30 Real-time Ethernet in mobile machines Stefan Taxer (B&R) CAN FD data link layer and physical layer Holger Zeltwanger (CiA) 15:30 12:00 12:30 Next generation Isobus Franz Kraatz (FH Osnabrück) Lunch break Universal Service Data Object - A new communication protocol for CANopen FD Uwe Koppe (MicroControl) CAN FD tools Peter Fellmeth (Vector) 16:00 16:30
Wednesday, June 10, 2015 Wednesday, June 10, 2015 Session V: Code generation Chair: Klaus Gnahm (STW) Session VII: Functional safety Chair: Holger Zeltwanger (CAN in Automation) 09:30 10:00 Automated source code generation using ODX Juan Aguilar (Sontheim) Experiences on quick and cost-effective translations from concept model to production code Mark Maessen (Brace Automotive) CAN-based safety parameterisation as a method for reducing the development effort Dr. Rolf Jung (STW) SIL-2 qualified IEC 61131-3 engineering platform for mobile machines Michael Schwarz (3S) 14:00 14:30 10.30 11:00 ODX-based flash solution for NRMM control systems Peter Subke (Softing Automotive Electronics) Functional safety for commercial and off-road vehicles, the challenges ahead Bart Oosthoek (Brace Automotive) 15:00 15:30 Session VI: Cloud diagnostic Chair: Peter Subke (Softing Automotive Electronics) IEC 13849/ISO 26262 in one application Dr. Peter Wratil (Innotec) 16:00 11:30 12:00 Outlook for on/off-board and cloud diagnostics in commercial vehicles Matthias Weber (Continental Engineering) Who owns the data and who may use it? Dr. Alexander Duisberg (Bird&Bird) Why remote services are revolutionising the market for mobile machinery Dr. Hans Regler (Bauer Maschinen), Dr. Michael Schmitt (STW) 16:30 12:30 Lunch break
CiA members Cospeakers Nonmembers Without German VAT With German VAT early bird 300,00 357,00 on-site 360,00 428,40 early bird 200,00 238,00 on-site 250,00 297,50 early bird 400,00 476,00 on-site 480,00 571,20 Early bird rates till May 29, 2015 I would like to register for the MMC conference I am a: Co-speaker CiA-member Non-member Company:... VAT:... Name:... Street:... ZIP/City:... Country:... Phone:... Email:... Date/signature:... CiA reserves the right to change the agenda and/or replace speakers. Please return your registration form to: CAN in Automation (CiA) Phone: +49-911-928819-0 Kontumazgarten 3 Fax: +49-911-928819-79 DE-90429 Nuremberg Email: marketing@can-cia.org