Quick Reference Guide How to Enroll into Online Health & Safety Courses Before launching courses, here are some things you need to know. 1. After a course has been completing, it can be re-launched again within Enterprise Learning by following the menu path: Quick Links > My Learning > Name/Title of your course (e.g., Biosafety Program Training). Then click the Re-launch link. 2. You can stop the course and resume it again without losing your place any time before taking the online quiz. The Enterprise Learning system will remember where you left off. 3. The online quiz must be completed in its entirety. If you leave the online quiz before completing it, you will be required to start from the beginning when you log in again. Begin, by navigating to the Environmental Health and Safety website located at: www.ucalgary.ca/safety Access Training 1. From the main menu, click the Training link. Select your Course 2. From the Orientation and Training section, click the Course Listing-Mandatory Training heading. 3. From the list displayed, select your course (e.g., Biosafety Program Training) by clicking its link from the Course Name heading. 4. [Optional] If prompted, enter in your CAS credentials The Class Details screen for your specific course will display. Page 1
Enroll into the Online Course 5. Click the Enroll button. Review Enrollment Information 6. Review your information as displayed onscreen, then click the Submit Enrollment button to commit the changes. A confirmation message will display, confirming your enrollment into the online course. Review Class Details 7. Click the Go To the Class button to review the class details for your course. Page 2
Initiate your Online Course 8. Click the Launch link displayed on-screen. 9. [optional] For more information about the class, click the Presentation link on-screen. 10. [optional] You can also drop the class by clicking the Drop button. Important Note! Remember to disable your pop-up blocker for your browser before starting your course. Launch your Online Course 11. Click the Launch link to begin your course. Navigating the Online Course 12. Click the button to begin your course. Hint! The button is also used to navigate through the rest of the slides in the course. Page 3
Completing your Online Course 13. Click the Continue button to mark the course as complete. 14. [optional] Click the Re-try Quiz button if you would like to take the quiz again. Congratulations! You ve successfully completed an Online Safety course using the Enterprise Learning System. Important Reminder! Your course is not marked as Completed until you click the Continue button (Step 13). Without clicking this button, your course will always stay in an In-progress status. Review or Exit the Online Course 15. To review the course again, click the button. OR 16. To exit the course, close the browser window in which you re viewing the online course. Page 4
Confirm Completion of Online Course 17. Confirm the Enrolment Status of your course within PS Enterprise Learning is showing as Completed and a "Confirmation Number" has been generated. Note: If your status has not changed to "Completed", please try these steps: 1.Switch your internet browser 2.Clear your cache and allow all pop-ups 3. Make sure you go to the final slide of the presentation with the EHS contact information For any technical assistance please contact the Integrated Service Centre at 403-220-5932. Print your Confirmation of Completion 18. Navigate to the My Learning Quick Link in Enterprise Learning by following the menu path: Quick Links > My Learning. 19. Locate your course (e.g., Biosafety Program Training) and click the Print icon (on the right side of your screen). Helpful Hints! Navigation Remember to use the buttons to move forward or backward in the presentation Quiz This button is used to advance the learner to the next question in the quiz. This button is used to continue in the presentation after taking the online quiz. This button is used to retry the course quiz. Page 5
If your online course is not displaying properly, it could be due to your browser settings, pop-up blockers, or missing software. For Internet Explorer 11 (or higher), please follow these steps: Click the zoom level button, and select Custom Then, change the zoom level to fit your screen (normally 80-85% zoom is sufficient) Browser Issues For Firefox, please follow these steps: Click and drag the corner of the window that s open and resize it accordingly Alternatively, you can press the F11 button (on Windows machines) to view the contents in Full-screen mode For more information and to view other training material available, please visit the Environmental Health and Safety website at: www.ucalgary.ca/safety Page 6