JDSU PathTrak Data Collection and Spectrum Analysis PathTrak WebView Installation Guide (Includes UCD Import Tool)
Notice Copyright The information contained in this document is the sole property of JDSU and may not be reproduced, copied, or communicated to third parties without written notice and permission by JDSU. This material will be given to direct partners and developers working with JDSU who have signed non-disclosure agreements. Such second parties may freely copy and distribute this information within their organizations but agree to keep such communications restricted to their internal employees on a need-to-know basis. Copyright 2010 JDSU. All rights reserved. PathTrak WebView Installation Guide Rev. 000 i
ii PathTrak WebView Installation Guide Rev. 000
Table of Contents Section 1 JDSU PathTrak WebView Installation Guide 1 Section 2 Install PathTrak WebView Software 2 Section 3 Upgrade PathTrak WebView From Version 2.0 or Higher 9 PathTrak WebView Installation Guide Rev. 000 iii
iv PathTrak WebView Installation Guide Rev. 000
Section 1: JDSU PathTrak WebView Installation Guide Section 1: JDSU PathTrak WebView Installation Guide ATTENTION JDSU PathTrak WebView WILL NOT FUNCTION without a valid license file being installed. To obtain a license file, email the MAC address of the PC that the software will run on and the JDSU sales order to licensingkey@jdsu.com. The JDSU sales order number is on a label on the CD-ROM box or can be obtained from JDSU Global Customer Service at 866-228-3762. The license file will be e-mailed within 1 business day from the receipt of this information. JDSU PathTrak WebView is structured so that each PathTrak server has its own unique PathTrak WebView server PC. Connecting more than one PathTrak server to a PathTrak WebView server will result in incorrect readings and corrupt data. Verify communication between PathTrak WebView server, PathTrak server, and all HCU's: PathTrak WebView Server machine must be able to ping its PathTrak server. PathTrak WebView Server machine must be able to ping all HCU's connected to its PathTrak server. PathTrak Server machine must still be able to ping all HCU's. Make certain the time and time zone are set properly for the locale of the PathTrak WebView server machine. PathTrak WebView Installation Guide Rev. 000 1
Section 2: Install PathTrak WebView Software Section 2: Install PathTrak WebView Software 1 Place the JDSU PathTrak WebView CD in the Path- Trak WebView Server's CD-ROM drive or navigate to the location of the downloaded setup file. 2 Launch the WebView Installer executable file. 3 Exit all running programs and click the "Next" button. Figure 1 2 PathTrak WebView Installation Guide Rev. 000
Section 2: Install PathTrak WebView Software 4 Accept the license agreement and click the "Next" button. Figure 2 PathTrak WebView Installation Guide Rev. 000 3
Section 2: Install PathTrak WebView Software 5 Select install locations for WebView and related software and confirm choices on summary screen before continuing. Click on "Install" to continue. Figure 3 4 PathTrak WebView Installation Guide Rev. 000
Section 2: Install PathTrak WebView Software 6 Next, follow the screen prompts to install the UCD Import Tool program and icons. Figure 4 PathTrak WebView Installation Guide Rev. 000 5
Section 2: Install PathTrak WebView Software Figure 5 6 PathTrak WebView Installation Guide Rev. 000
Section 2: Install PathTrak WebView Software 7 Once the installation is complete, click the "Done" button. Figure 6 8 When InstallAnywhere is finished, close all Path- Trak WebView windows. 9 Copy the license file from the email to the C:\Program Files\ActernaDCS\license directory and reboot the PC. The reboot is necessary for the data collection to start working. 10 If the HCU is going to reside on a different network than the PathTrak WebView Server, modify the "HCU routing table". 11 To modify the routing table, you need to log into the HCU using Telnet or Hyper Terminal and type: HcuRouteAdd "0.0.0.0", ";yyy.yyy.yyy.yyy ";. PathTrak WebView Installation Guide Rev. 000 7
Section 2: Install PathTrak WebView Software CAUTION The HCU routing table must be modified to send data to the PathTrak server and the PathTrak WebView server through a gateway. This command line is casesensitive. The ";0.0.0.0 "; indicates that the data will be sent to both destinations, and the "yyy.yyy.yyy.yyy "; series is the gateway address to which the HCU is connected. The IP Address must be in quotes. There is a space before the ";0.0.0.0 "; address. A comma must separate the two addresses. If the command is accepted, the value 0=0x0 is displayed on the HyperTerminal screen. CAUTION If there is not a gateway (switch/router) between the HCU and PathTrak WebView server, modification to the HCU Routing table is not necessary. NOTE The WebView server must be restarted after any adjustment to the Time or the Time Zone. This includes daylight savings (summer) time. NOTE All regional settings for the WebView server must be set to English/U.S. 8 PathTrak WebView Installation Guide Rev. 000
Section 3: Upgrade PathTrak WebView From Version 2.0 or Higher Section 3: Upgrade PathTrak WebView From Version 2.0 or Higher 1 Place the JDSU PathTrak WebView CD in the PathTrak WebView Server's CD-ROM drive or navigate to the location of the downloaded setup file. 2 Launch the WebView Installer executable file. 3 Exit all running programs and click the "Next" button. Figure 7 PathTrak WebView Installation Guide Rev. 000 9
Section 3: Upgrade PathTrak WebView From Version 2.0 or Higher 4 Accept the license agreement and click the "Next" button. Figure 8 10 PathTrak WebView Installation Guide Rev. 000
Section 3: Upgrade PathTrak WebView From Version 2.0 or Higher 5 Confirm the folder to install the JDSU PathTrak WebView upgrade. Figure 9 PathTrak WebView Installation Guide Rev. 000 11
Section 3: Upgrade PathTrak WebView From Version 2.0 or Higher 6 Next, follow the screen prompts to install the UCD Import Tool program and icons. Figure 10 12 PathTrak WebView Installation Guide Rev. 000
Section 3: Upgrade PathTrak WebView From Version 2.0 or Higher Figure 11 PathTrak WebView Installation Guide Rev. 000 13
Section 3: Upgrade PathTrak WebView From Version 2.0 or Higher 7 Once the installation is complete, click the "Done" button. 8 When InstallAnywhere is finished, close all Path- Trak WebView windows. Figure 12 14 PathTrak WebView Installation Guide Rev. 000
Test and Measurement Regional Sales North America Toll Free: 1 800 638 2049 Tel: +1 240 404 2999 Fax:+1 240 404 2195 Latin America Tel: 954-688-5660 Fax:954-846-8856 Asia Pacific Tel: +852 2892 0990 Fax:+852 2892 0770 EMEA Tel: +49 7121 86 2222 Fax:+49 7121 86 1222 www.jdsu.com Doc. 21XXXXXX-001 Rev. 000 August- 2010 English