Quick User Guide for DVR Camera System Before Setup Remote Access Make sure you have done: Hook cameras to the DVR using cables included in the package; power on your DVR and cameras; Connect your DVR to a monitor (please make sure it supports resolution: 1024*768). Use an Ethernet cable to connect your DVR to your router and high-speed Internet access; Refer to the connection diagram as below: Network Configuration 1. Right-click mouse on your monitor and click Main Menu > Network, you can see the picture as below:
2. Select to enable DHCP and click OK to save. Make sure your router has enabled the DHCP function. 3. Right click --> Logout --> Reboot to reboot device, then it will automatically assigns IP address for your DVR. 4. Please wait for 5 minutes after reboot, then right click mouse to go to Main Menu --> P2P QR Code to see whether successful or not: a) If showing connect status Success, it means the DVR has connected to internet already; if showing connect status Disconnected, it means the DVR does not connect to the internet, please check network cable connection. b) If showing connect status connecting, it means the DVR doesn t connect to the internet. (Please refer to the FAQ 1 in this quick guide for troubleshooting View on Mobile(iPhone/ Android) (1) Scan iphone or Android QR Code to download & install APP (Right click mouse on your DVR monitor and go to Main Menu --> P2P QR Code, then you will see the QR Code as below. 1
IPhone APP (2) Run App, you have two options to login in. Option-1: Create an account with one of your email to login. ANDROID APP Option-2: Just tap ID directly to login. (3) Click +. (4) Choose Manual 2
IPhone Android (5) Input the information required make sure you select GID as the picture below; IPhone Android (6) GID is the Serial Number of your DVR. Right click mouse on your DVR monitor and go to Main Menu --> P2P QR Code, then you will see the Serial Number of the DVR as below. 3
(7) Save, then you can see the CAM1. Tap on CAM1 to show channels. But you cannot view live video now, make sure tap number (1, 2, 3, 4, etc) to open each channel s live video. (7) Set multi-channel display: a) Tap, then tap to do setting. b) Video views -- you can choose 1/4/9/16 channel Live preference: Real time If you are using Wi-Fi network, and would like to view real 720P HD video, you can select Real time. Fluent/ Smooth If you want to save cellular data and get smooth video under poor network, you can select Fluent/ Smooth, the app will deliver CIF video, it is more smooth than real time, but the video is not that clear as 720P HD. 4
c) Interface of 9 display; d) Open multi-channels to watch video. IPhone Android View on PC via IE (Internet Explorer) When your PC is in the same LAN with the DVR (normally means they are connected to the same router) 1. Enter DVR IP address to 32-bite IE browser Bar 5
2. Click download to download & install ActiveX IVSWeb.exe for the first time. 3. After ActiveX installed, input the same name and password are the one you use to login in DVR. 4. Login, then click Main Stream to watch the video. When your PC is not in same LAN with the DVR (For example: view your home cameras from your office PC) 1. Open the website at http://www.yunyis.com with 32-bite IE browser 2. Click download to download & install ActiveX anycam.exe for the first time. 6
3. Choose Device Login,Device ID is the Serial Number. Right click mouse on your DVR monitor and go to Main Menu --> P2P QR Code, then you will see the serial number of the DVR as below. Use the same name and password are the one you use to login in DVR. 4. Login, click channel one by one to watch video. View on PC via CMS PC Client Software 1. Download the CMS software at link below; download it to your PC and install it. http://www.defeway.com/faqlist.asp 7
2. Please run CMS2000 PC client software 3. Click on system Setting (which is located in the right bottom of the CMS interface) to pop up other functions as below: 8
4. Click on Monitor Manager to pop up a window like below: When your PC is in the same LAN with the DVR (normally means they are connected to the same router) 1. Please click on Lan Device, then click on search to let CMS Client software to search your device automatically. 9
2. Please select DVR, then click Search. 10
3. If searched out device information, it will pop up a window like below. 4. Then click on the device information, all information like device name, ip address.etc will pop up automatically. 11
5. The password will be the default one -123456, if you have changed your password already, please enter it manually, then click Add to add device. 6. Double click on the Device Name in the upper left as picture below to connect to your cameras. 12
7. Right click on your device name and select Open All MainStream to view all connected cameras. When your PC is not in same LAN with the DVR (For example: view your home cameras from your office PC) 1. Please click on P2P, then click on Add to add your system information to the CMS Client software. 2. Please add information below to access your cameras; click Save when you finish all. 13
Device Name the device name you have set for your dvr system. User Name admin (default user name is admin, if you have never change it. Password the default password is 123456; If you have changed it, please type your new password. Total Channel You can set it according to the DVR channels.(4/8/16) UID UID is the serial number of your DVR. Right click mouse on your DVR monitor and go to Main Menu --> P2P QR Code, then you will see the serial number of the DVR as below. Device Type HC P2P 3. It will pop up a window states Add DeviceSuccess, then close the pop up window Monitor Manager 14
4. Close the window 5. Double click on the Device Name in the upper left as picture below to connect to your cameras. If connected, it will pop up a message states The device is connected. 6. Right click on your device name and select Open All Channel to view all connected cameras. 15
16