Contents. 1 installation guide. 1 camera, 1 power adapter. Mounting accessories

Transcription

1 Contents 1 installation guide 1 camera, 1 power adapter Mounting accessories Red (Status LED) Blue : (WiFi LED) OFF: The device is not powered LAMBENT: The device is powering SLOW: No network connection STEADY: Connect Wi-Fi successfully QUICK: Start to upgrade/reset successfully OFF: The device is powered 5 minutes but not connect Wi-Fi yet SLOW: Not connect Wi-Fi QUICK: The device is connecting Wi-Fi now STEADY: The device has connected Wi-Fi already

2 Easy Set Up Step 1 Download Go to the App Store or Google Play to search and download ismartviewpro APP to your supported device. Or scan the QR code below to get the app. Step 2 Power on camera Power for the camera with the included power supply and place it near your router Step 3 Connect to network Add camera onto the App

3 Verify your smart device(ios or Android) is connected with a 2.4G WiFi network Launch the ismartviewpro app, Click Guide to access Add Camera page and select Add cameras via WiFi Configuration When the camera's blue light is flashing slowly, then choose Blue light is flashing slowly and Scan the QR code on the bottom of the camera, and name the camera (any name is OK). Then Next ( keep "admin" as login name and "123456" as the default password)

4 Input correct WiFi password,choose Connect to WiFi and Next, then the camera will try to connect, if connected, Add success appears, and it will go back to the Camera page, and shows online. If it fails to connect, please tap try again if the blue light is still flashing. * Wi-Fi name and Password should not contain special characters 'and &. The whole process should be finished within 5 minutes of powering on. Otherwise, the camera should be unplugged and powered back.

5 Note: When the camera shows "online", you can move it to other place that has a good wifi receiption. Step 4 View Live video and Edit Camera Once your camera is online, you can view live video and enter to the Edit Camera page to do more settings according to the below picture.

6 Always remember to change your password, tap the > and then access to Edit Camera Page, get into Advanced Setting then User Settings, change password and click Done to save. Live Vedio Interface

7 FAQ: 1. If the night vision stops working, please turn on the IR light as below: 2. If you forgot the password, hold the Reset button around 15 seconds, then the camera will be back to factory default. Default User/password: admin/ Remember to configure WiFi to the camera again after the Reset. 3. How to connect the camera to the second phone? ittiot camera supports 4 devices to view the same camera at the same time. After you use one phone to get your camera connected to your WiFi and you can view the live video from your first phone, if you would like to add your camera to the second phone, please follow the below steps: 1. Download the ismartviewpro App to the second phone 2. Launch the ismartviewpro app, and tap and select "Add already connected network camera".

8 User can use the below ways to add the camera: 1) Lan Search If the mobile device and the camera are in the same WiFi network, user can use Lan Search to search the connected camera. 2) Scan QR code If camera is on your hand, you can tap to scan the Camera s QR code to get the camera information. 3) Manually input camera information Camera s DID can be found from the camera s sticker or ismartviewpro app, default Username/Password is admin/123456; Name can be any information. Attention: Please remember to give your camera a name, and input your Password. Click on go back to home to start to view & control. 4. Change password and add another user When the camera is online, click on > to access Advanced Settings, Under the User Setting/Management, user can change the default username(admin) and password (123456), or create another user account with certain access rights, such as an Operator or Viewer account for other person to view the camera.

9 1) Change Username and password Tap User Setting, and choose Administrator>Admin, user can change the username and password, then tap Done. 2) Add another user account On User Setting, tap to add user, manually add the username and password, then choose the Role(Operator or Viewer). Administrator: Full access rights Operator: Can operate on the camera live video screen, but not access to other settings like Alarm setting, Advanced Setting etc. Viewer: only can view camera, no more operations on the camera video screen. Note: Password shall be no longer than 20 characters.

10 5.How to set it to record constantly to the memory card? Please insert the Micro memory card as what shows below. Max storage 128GB When the camera shows online, tap > to enter Edit Camera page. Please format your memory card on the app before using. 1. Click on Advanced Settings 2. Click on Memory Card Setting 3. Enable Memory Card Setting 4. Set Record Time (15 minutes (Max)) 5. Click Done

11 6. How to view the recorded video on memory card? When the camera is online, click on > to access to Edit Camera page. 1. Click on [Records] 2. Select Recording Type [Schedule/Alarm/All] 3. Select Date with blue dot 4. Click on [Done] 5. Click the file to playback the recorded video Tips: The video with NRC is for schedule recording, ARC is for alarm recording

12 7. If you have several cameras, please follow the below steps to use Multi-view Function by tapping the icon, and then choose the cameras you want to view on the multi-view screen at the same time.

13 8. How to record 24/7 constantly on PC software Download Wansview PC software from: After you install the software, follow the below steps to add the camera (DID can be checked from camera's sticker). Before recording to your local computer, please make sure you set up the Record Path on the Local Setting.

14 Then go to schedule recording and follow the below steps to set up the recording: 1:Click Create to create a Record name, it will give you a name automatically(combination of date and time), user can edit the name. 2:Select time: User can select all if want to record 24/7, and clear it to choose a specific time by dragging or single-click the time interval. 3:Save: Save the record name and time interval you set up. 4:Double-click the Record name to choose it as the record plan. 5:Apply: Click Apply, a symbol * will appear in front of the Record plan, it means the scheduled recording is working. The icon will be shown on live video screen, it means the camera is recording automatically:

15 User can playback the recorded videos (Local or SD card) from Playback Note: To record constantly, please make sure the Wansview software is running. Software will stop recording if you exit the PC software. When you launch the software next time, software will continue recording. LET US KNOW WHAT YOU THINK Thank you so much for your order and trust to ittiot. Please feel free to contact us if you have any questions about the product application. As a young and growing company, it would mean the world to us if you could leave an honest review about our product and services. Service Support service@ittiot.com Facebook: The instruction is for reference only. Slight differences may be found in the user interface. All the designs and software here are subject to change without prior written notice. For latest instructions, please go to to download.