DESIGNED AND MADE IN THE USA USING DOMESTIC AND IMPORTED COMPONENTS In 1946, Paul W Klipsch, genius & maverick, hand-built his first loudspeaker in a tin shed with the intention of bringing live music into his living room. Remember great sound? We do, too. Today, Klipsch s KI series speaker enclosures are made in the USA, by proud craftsmen in Hope, Arkansas. Just like PWK intended. PRODUCT OVERVIEW Designed for high output and long-term reliability, the Klipsch KI-115-SMA-II low frequency enclosure utilizes a single K-48-ST cast frame 15 woofer. This 14-ounce magnet, 3 voice coil powerhouse delivers high sensitivity with superior power handling. Klipsch s specially designed speaker motor assembly ensures that high transient cone excursions won t damage the voice coil former under extreme output applications. Perfect for music reinforcement and reproduction, the KI-115 finds ready application in clubs, theaters, auditoriums, churches and performance environments. The rugged, tuned port, 3/4 furniture grade plywood enclosure utilizes CNC fabrication techniques for uniform tolerances, contributing to advanced reliability and ruggedness. Dado locktab and rabbet joint construction contribute to freedom from resonance and cabinet-induced coloration. FEATURES High power 15 low frequency speaker system Compatible with Klipsch KI-SMA-II, KI-172-SMA-II, KI-262-SMA-II, and KI-272-SMA-II speaker models Specially designed motor assembly assure high transient cone excursions do not harm the voice coil under extreme out application APPLICATIONS Four suspension points on the back of cabinet (face down orientation only) 124 SPL maxmium output Available in Black, White or Raw Birch finish SPECIFICATIONS RESPONSE 1 (+/- 3 ) POWER HANDLING 2 MAXIMUM SPL 3 SENSITIVITY 4 NOMINAL IMPEDANCE COMPONENTS INPUT CONNECTION MOUNTING OPTIONS ENCLOSURE MATERIAL HEIGHT WIDTH DEPTH WEIGHT FINISHES 1 3M, Half-spaced anechoic 2 AES standard, continuous pink noise, 6 peaks 3 Calculated at 1M half-spaced at power handling power input 4 SPL at 1M, half-spaced anechoic with 2.83V input 49 Hz - 2 khz (-1 @ 35 Hz) 4 watts (44.7V) 16 watts peak 124 Continuous 13 Peak 11 8 ohms, minimum 5 ohms @ 39 Hz One K-48-ST 15 woofers Two point barrier strip Four 3/8-16 flypoints 3/4" 7-ply birch plywood cabinet 18.5 (46.99cm) 24.6 (62.48cm) 19.2 (48.77cm) 62 lbs. (28.18kg) Black, White and Raw Birch finish Performing Spaces Auditoriums and Houses of Worship Small/medium Sports Facilities Theme Parks and Leisure Venues Bars and Music Clubs SPEC SHEETS, EASE DATA, DOWNLOADS, AWESOME: -DOWNLOADS All specifications are subject to change without notice. 216 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. 1 OF 7 KI-115-SMA-II DATA SHEET V4 4.1.17
RESPONSE 12 115 11 15 1 95 9 85 8 2 5 1 2 5 1k 2k 5k 1k 2k IMPEDANCE 1 5 2 1 OHMS 5 2 2 5 1 2 5 1k 2k 5k 1k 1 2k SPEC SHEETS, EASE DATA, DOWNLOADS, AWESOME: -DOWNLOADS All specifications are subject to change without notice. 216 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. 2 OF 7 KI-115-SMA-II DATA SHEET V4 4.1.17
HORIZONTAL OFF AXIS TRANSFER FUNCTION 12 HORIZONTAL COVERAGE () 36 6 315 27-1 -2-3 -4-3 225 18 135 9 45 COVERAGE ANGLE 2 5 8 22 58 86 128 2 512 8 1292 248 2 5 8 22 58 86 128 2 512 8 1292 248 VERTICAL OFF AXIS TRANSFER FUNCTION 12 VERTICAL COVERAGE () 36 6 315 27 1 2 3 4-3 225 18 135 9 45 COVERAGE ANGLE 2 5 8 22 58 86 128 2 512 8 1292 248 2 5 8 22 58 86 128 2 512 8 1292 248 DIRECTIVITY INDEX 2 18 16 14 12 1 8 6 4 2 2 5 8 22 58 86 128 2 512 8 1292 248 SPEC SHEETS, EASE DATA, DOWNLOADS, AWESOME: -DOWNLOADS All specifications are subject to change without notice. 216 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. 3 OF 7 KI-115-SMA-II DATA SHEET V4 4.1.17
33 3 3 6 HORIZONTAL 1/3 OCTAVE POLARS 27 3 24 33 21-3 18 58 64 86 116 3 15 27 24 6 9 12 21-3 18 128 1613 2 256 15 9 12 3 27 24 33 21-3 18 22 254 43 3 15 6 12 9 SPEC SHEETS, EASE DATA, DOWNLOADS, AWESOME: -DOWNLOADS All specifications are subject to change without notice. 216 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. 4 OF 7 KI-115-SMA-II DATA SHEET V4 4.1.17
33 3 3 6 VERTICAL 1/3 OCTAVE POLARS 27 3 24 33 21-3 18 58 64 86 116 3 15 27 24 6 9 12 21-3 18 128 1613 2 256 15 9 12 3 27 24 33 21-3 18 22 254 43 3 15 6 12 9 SPEC SHEETS, EASE DATA, DOWNLOADS, AWESOME: -DOWNLOADS All specifications are subject to change without notice. 216 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. 5 OF 7 KI-115-SMA-II DATA SHEET V4 4.1.17
ARCHITECTURAL SPECIFICATIONS The KI-115-SMA-II professional subwoofer shall include a 15 (381mm) K-45-ST low-frequency transducer utilizing 3 (76.2mm) voice coil, and 14-ounce (2.95kg) motor magnet assembly. The enclosure tuning shall be of a vented design. Frequency response shall be 49Hz to 2Hz, +/- 3, with the -1 point at 35Hz, measured at three meters, half-space anechoic. Sensitivity shall be 11 SPL, measured at one meter, half space anechoic, with a 2.83v input. Power handling shall be 4 watts (44.7volts), to AES standards, continuous pink noise, 4Hz to 4Hz, 6db peaks. Calculated maximum continuous output at one meter shall be 124 SPL. Nominal impedance shall be 8 ohms, with 5 ohms minimum at 39Hz. 8.4 (21.34cm) 12.3 (31.24cm) 19.2 (48.77cm) Signal connections shall be made via a two-point barrier strip. The enclosure panels shall be CNC-fabricated, 3/4 7-ply birch plywood, assembled using rabbet and dado joinery. Dimensions for the enclosure shall be 18.5 (46.99 cm) high by 19.2 (48.77cm) deep by 24.6 (62.48cm) wide, in a rectangular shape. Net weight shall be 62lbs. (28.18kg). The enclosure will have a metal perforated grille for structural integrity and protection of the transducers from impact and tampering. Enclosure flying capability shall be provided via four, on back panel, internal 3/8 16-thread mounting points. TOP/BOTTOM 24.6 (62.48cm) The enclosure shall be coated with lacquer-based primer and lacquer-based texture, with a black or white finish. The enclosure shall also be available unfinished in raw birch. The system shall be a Klipsch KI-115-SMA-II loudspeaker. 18.5 (46.99cm) 9.25 (23.5cm) 19.2 (48.77cm) 8.4 (21.34cm) 12.3 (31.24cm) SIDE FRONT 3/8-16 threaded hole 4 PLCS use for single speaker suspending 1.8 (4.57cm) 12.1 (3.73cm) 9.5 (24.14cm) 14.9 (37.85cm) NEED HELP WITH YOUR PRO SYSTEM DESIGN? You need to make the best impression, from the initital job quote through the completed installation. We can help choose the best Klipsch speakers for the application and help design a system that unleashes your venue s full potential. 12.3 (31.24cm) BACK Send us your plans or questions to us at: PROSYSTEMDESIGN@KLIPSCH.COM CENTER OF GRAVITY SPEC SHEETS, EASE DATA, DOWNLOADS, AWESOME: -DOWNLOADS All specifications are subject to change without notice. 216 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. 6 OF 7 KI-115-SMA-II DATA SHEET V4 4.1.17
ORDERING INFORMATION KI-115-SMA-II PART NUMBER MODEL NAME FINISH PACKED QUANTITY DESCRIPTION UPC 16211 KI-115-B-SMA-II Black 1 Standard 8 ohm speaker 74387827952 16212 KI-115-W-SMA-II White 1 Standard 8 ohm speaker 74387829178 16213 KI-115-R-SMA-II Raw Birch 1 Standard 8 ohm speaker 74387829161 KI-115-SMA-II CARTON DIMENSIONS HEIGHT 22 (55.9cm) WIDTH 26.8 (68.1cm) DEPTH 2.9 (53.1cm) SPEC SHEETS, EASE DATA, DOWNLOADS, AWESOME: -DOWNLOADS All specifications are subject to change without notice. 216 Klipsch Group, Inc. Klipsch and Tractrix are registered trademarks of Klipsch Group, Inc. A wholly-owned subsidiary of Voxx International Corporation. 7 OF 7 KI-115-SMA-II DATA SHEET V4 4.1.17