Vehicle-Specific Towing Electrical Kits TF2352GM

Similar documents
Vehicle-Specific Towing Electrical Kits TF2352VAG

W205-RVC NTV-KIT580. Overview

3950 NW 120 th Ave, Coral Springs, FL TEL FAX MFT F-CAM. Force Front Camera Module NTV-KIT831 BHM 07/31/18 NTV-DOC298

Jaguar F-TYPE CAM 16. Dual Camera interface for select 16+ Jaguar vehicles NTV-KIT746 BHM 05/31/16 NTV-DOC259

Instructions for our modular digital wireless systems

Instructions for our 12V/24V system

REC-AV XG NTV-KIT276

A3/GOLF 7-CAM NTV-KIT500

Jaguar F-TYPE CAM Dual Camera interface for select 14+ Jaguar vehicles NTV-KIT589

Navigation interface for Jeep GC 5 RA2 NTV-KIT581

CHRY UNI-CAM v2. Chrysler/Dodge/Jeep uconnect (RA4/RA3/RA2) Dual Camera/Control in Motion Interface NTV-KIT759

Parrot MULTICOMM For Mitsubishi steering wheel

INSTALLATION INSTRUCTIONS

December 2017 S-SHAPED SOFT TPU CASE FOR IPHONE 7/8 TRANSLUCENT TPU CASE FOR IPHONE 7/8 TPU CASE FOR IPHONE 7/8 WITH LEATHER CARD SLOT

UCTv2-W. 18 Wrangler uconnect 4.0 (CarPlay/Android Auto) Dual Camera Interface NTV-KIT851 BHM 01/19/18 NTV-DOC308

Target cell RTD-set. RTD label. Epics RTD notation. Red or Golden. CPC plug slot. Old notation from 1 to 15** RTD 4, B4, R2.

Parrot MULTICOMM For FORD steering wheel

intelligent monitoring solutions C A N t r a k C O N F I G U R A B L E I N P U T M O D U L E ( C C I M ) I N S T A L L A T I O N M A N U A L

GSV-1A4 M12/2 M12/2. Highlights

R. C. Tronics Incorporated

Gold Drum HV Gold Drum HV Cable Kit (EtherCAT and CAN)

MegaTrak MCU-9000 Harness Wiring

Connection Cables for Operating Devices

Industrial Power Supply Connectors

V-MUX CONNECTOR and ACCESSORY SPEC

INSTALLATION INSTRUCTIONS

PCM4-CAM NTV-KIT750. Overview

1. Mount the echo and tremolo control switches under the keyboard shelf, in a position convenient for the organist.

e-ask electronic Access Security Keyless-entry OEM / Dealer / Installer Cargo Lock / Unlock Version Installation & Instructions (UM04 ~ )

MEGA DIAL PANEL Instructions

Compatible with GM CUE, MyLink and IntelliLink Infotainment Systems with 8 and 10.2 screens. NAVGM-80R MODULE CAN BOX AND HARNESS GPS ANTENNA

AUDI DYNAMIC-A3 NTV-KIT702

Parrot MULTICAN for Mini cars (part 2)

Case AFS PRO 300, 600, 700 & INTELLIVIEW II, III, IV (Case & NH ISObus Ready) Display Kit Installation Manual 54VT-PRO-PT01

MouldFlo Wiring Manual

970 Serials Lights. Multi-Function Lights System FEATURES SPECIFICATION

Subject: 24 Volt Hand Dryer Replacement Option Conversion Kit Package v Hand Dryer to 115v / 230v Hand Dryer

Environmentally Sealed

Case AFS Pro 300, 600, 700 Display Kit (Self-Propelled) Installation Manual 54VT-PRO-SP01

HC900 Remote Termination Panel (RTP) For Relay Outputs

Orion Jr. Purchasing Guide Rev. 1.2

Volvo VIM NTV-KIT298

BMW / Mini. X SERIES Up X1 Sports Vehicle X5 Sports Activity Vehicle X6 Sports Activity Coupe

Installing Sentor. Hardware Installation

Connecting a Cisco Reader Module

Power connections 3) Power from 2024 to Control box (The valve harness connected) Ground (0V) +24 V. The voltage between pins 1 & 2 in JPT# 123

CHRY MULTI-CAM. Dodge/Jeep uconnect (RA4) Interface with 6 video inputs NTV-KIT764 BHM 09/25/17 NTV-DOC266

Ford 4 MULTI-CAM V1/V2 5-camera / AUX Video Interface for Ford 4 media screens NTV-KIT601/609

NNG-GM2 Navigation interface for GM vehicles equipped with LVDS MYLink/CUE NTV-KIT552

INSTALLATION INSTRUCTIONS

Installation Guide. Version: 6.1 (Digitax 4G) July 2018

Strain gauge Measuring Amplifier GSV-1A8. Instruction manual GSV-1A8, GSV-1A8USB, GSV-1A16USB

Parts and Accessories Installation Instructions

Older Compaq UPS Family - Identifying Serial Communication Cables

Local Set Point Module Operating Bulletin

PRODUCT USER MANUAL 12V. 5 Mirror + REVERSE camera IP67 PAGE 1 GX53HDM ABC-123. Mount INSTRUCTION MANUAL. Guide Lines

IB080QM65VA3 Part Number

Field Update Guide. for Raven Viper Pro

SMM501/501-H (Surveillance Mode Module) Ford Police Interceptors (Sedan and SUV)

Introduction. Chapter 2

Posi-Lok Plugs and Panels

GM-K PRG. Dual Camera interface for 15 Chevy Sonic/Spark/Trax NTV-KIT626 BHM 10/15/15 NTV-DOC235

UCIT BASIC-LIVE 2 CAMERA Vehicle Video Recorder Installation Manual

AUDI-09 EXT MMi NTV-KIT187

Holder, Speaker and Charger Functions (With Optional Cellular Phone Hands free capability) FEATURES...1

Installation And Testing Guide

AUDI DYNAMIC-EXT NTV-KIT701

AX-ADDCAM AX-ADDCAM. INTERFACE COMPONENTS AX-ADDCAM interface AX-ADDCAM harness

SERVICE PARTS MANUAL

MDK. Accelnet Module DevKit. Provides Mounting & Connections for Accelnet CANopen Servoamplifiers FEATURES

INTERCOM SYSTEM Model ICA900

IOB-RVC NTV-KIT798. Overview

IOB-RVC NTV-KIT798. Overview

EPGG001. Fieldbus Gateway RS-232 to PROFINET. Industrial Communication. Technical Data. Part Number

3.3: Setting momentary / latching switches Page Warning Regarding Operation Page 8

fischer connectors 4032 Series HIGH-PERFORMANCE IN A VERSATILE PACKAGE MEDICAL PORTABLE EQUIPMENT DATA ACQUISITION INSTRUMENTATION Edition 1.

IncroMAXX Transit. Installation Guide Lake Forrest Drive Suite 410 Atlanta, GA

Installation Instruction VCPRGBGM05 - rev1.5 RGB Interface Harness modification Navigation Radio

AUDI DYNAMIC-EXT NTV-KIT701

W DYNAMIC Kit NTV-KIT461

Multi-channel system install guide

Installation Guide. Version: 5.6 (Digitax) April 2016

mobridge XM Install Notes

CONSOLE CONNECTOR KIT 9501 INSTALLATION INSTRUCTIONS

C.O.D-F50. Ford OEM 360 Surround-View Camera Controller NTV-KIT899 BHM 02/01/19 NTV-DOC334

Panorama rudder indicator TRI-2 Analogue or CAN input Approved according to MED Three extra large scales Long-life LED illumination Built-in dimmer

Weighing News From Sartorius. Introducing the New Sartorius Combics 2 Indicator with IS High Resolution Platform.

*000IPODIG* ipod Installation Guide. Tools Needed: (depending upon vehicle) 000IPODIG IMPORTANT

Infrared Light Module SM-IR-16-2 V1.00

OPERATING INSTRUCTIONS 7 SERIES STATIC GENERATORS

RVCGM-80C Rear View Integration Interface for Select GM Vehicles with CUE, Intellilink and MyLink Systems

HAWK MV-4000 Smart Camera

Universal Expander Module INSTALLATION MANUAL. Overview. Electrical Specifications

Digital Keypad Introduction

Parrot Reference : - If you are interested, contact our sales department :

Dolphin CT50 Mobile Computer Dolphin CT60 Mobile Computer Accessories Guide

Vehicle Video Recorder Installation Manual

BATTERY CONNECTORS VOLTAGE COLOUR COMBINATIONS DIMENSIONS OF THE BATTERY CONNECTORS BATTERY CONNECTOR: SB / S 50 BATTERY CONNECTOR: SB120 SB-SERIES

INSTRUCTION MANUAL FN-8118 SCAN HERE

Bench Harness Wiring Pinouts

Transcription:

Vehicle-Specific Towing Electrical Kits TF2352GM Opel/Vauxhall Insignia SD, HB, ST 2008>207 Opel/Vauxhall Signum C 2005>2008 Opel/Vauxhall Vectra C Hatchback, Saloon, Estate 2005>2008 Opel/Vauxhall Movano 200> Caravan Auxiliary (2S) function is built in Installation is simple and quick - no need to take the vehicle apart. High-quality connections throughout are easy and uncomplicated Contents Page Page 2-3 Page 4 Page 5 Page 6 Page 7 Page 8 Contents Cable routing, CAN & power connections Detail of power and caravan auxiliary connections Kit components CANbus connections Socket assemblies Testing and coding Fully compatible with vehicle management systems to activate all vehicle safety features Type approved and built to OEM standards Instructions are easy to follow Ryder Towing Quality Service Innovation Spimin House, Beacon Road, Poulton-le Fylde, Lancs, FY6 8JE 0253 88008 www.rydertowing.co.uk mail@rydertowing.co.uk Page

Cable routing, CAN & power connections Vauxhall/Opel Insignia SD, HB, ST 2008>207 CAN HI/CAN LO H Green CANBUS PIN 28 Green CAN L Brown Fuse box power access point ALT CAN HI/CAN LO Earth point Entry point Page 2

Cable routing, CAN & power connections Vauxhall/Opel Signum C, Vectra C Hatchback, Saloon, Estate 2005>2008 Alt CAN HI/CAN LO on REC unit Only CAN Hi should be found behind this Connector (green). CAN Lo to be connected to earth if using this connection point. Fuse box power access point ALT CAN HI/CAN LO Found on OBDII connector pin and 4. Here next to cigarette lighter. H CAN Green L Brown Earth point Entry point Page 3

Cable routing, CAN & power connections Vauxhall/Opel Movano 200> CAN HI/CAN LO Found on OBDII Connector With fusebox Pin (CAN Hi Green) and Pin 4 (CAN Lo Brown) H Green CAN L Brown Fuse box power access point Entry point Earth point Page 4

Power and Caravan Auxiliary Detailed Connections Module loom detail LH FLASHER YELLOW Socket yellow 2 CHASSIS WHITE Ring terminal to chassis 3 4 C2 PINK Buzzer 5 CAN LO BLACK Twisted pair 6 CAN HI RED to CAN 7 RH FLASHER GREEN Socket green 4 8 RH TAIL BROWN Socket brown 5 9 STOPS RED Socket red 6 0 LH TAIL BLACK Socket black 7 REVERSE YELLOW/WHITE 3-pin 8 or 2S 2 FOG BLUE Socket Blue 2 LH FLASHER 2 CHASSIS 3 4 C2 5 CAN LO 6 CAN HI 7 RH FLASHER 8 RG TAIL 9 STOPS 0 LH TAIL REVERSE 2 FOG 2 0 9 8 7 6 5 4 3 2 e 03 5722 TF2302 Ryder 230GM SmartCAN Towing Module with 2S Combi function 2N 2V input 2 2S 2V input 3 2S 2V input 4 2S Switched output 5 2S Switched output 2 3 4 5 2N 2V input The fused input for the road lights (5 amps) 2 2S 2V input One of two connected inputs for the caravan auxiliary function 3 2S 2V input Second of two connected inputs for the caravan auxiliary function. Use this for the unswitched caravan output 4 2S Switched 0utput Two switched outputs for the caravan fridge. 5 2S Switched output Having two outputs reduces voltage drop The caravan auxiliary supply is controlled by the CAN system, using the engine revs. This means its function is not impaired if the vehicle has "Smart" charging. USE ONE OR TWO POWER TAPS TO TAKE POWER FROM THE FUSEBOX USE ONE POWER TAP FOR A (2N) INSTALLATION (OR 3-PIN) USE TWO FOR A DOUBLE (2N+2S) INSTALLATION (TWIN 7 OR 3-PIN) FUSE THE 2N CONNECTION 5 AMPS AND THE 2S CONNECTION 20 AMPS How Posi-Taps connect. Use Posi-Taps to make the connections to CAN HI and CAN LO PosiTap connectors Signal cable from SmartCAN module Twisted pair or shielded signal cable Page 5

TF230GM SmartCAN module SmartCAN loom with CANbus Plug LH FLASHER 2 CHASSIS 3 4 C2 5 CAN LO 6 CAN HI 7 RH FLASHER 8 RG TAIL 9 STOPS 0 LH TAIL REVERSE 2 FOG 2 0 9 8 7 6 5 4 3 2 e 03 5722 TF2302 Ryder 230GM SmartCAN Towing 2N 2V input 2 2S 2V input 3 2S 2V input 4 2S output Switched 5 2S Switched output 2 3 4 5 TF2352GM Kit Components 3-pin kit x 3-pin socket assembly, 2 metres x Mini buzzer x 5 amp mini fuse x Twin 35s Aux power cable, 5m 2 x PowerTap Mini x 20 amp mini fuse 3 x ring terminals 7-pin kit x 7-pin socket assembly, 2 metres x Mini buzzer x Black single 35s Aux power cable 5m x PowerTap Mini x 5 amp mini fuse ring terminal Butt-terminated cables 50mm 5m twisted pair with red Posi-Taps Power and CAN Cables 2N 2S 5 metres mm 2 single cable 5 metres 2.5mm 2 twin cable CAN cable 5 metres shielded signal Page 6

CANbus Connections TF230 CANbus module Butt crimp connectors 2-pin plug and loom Module loom detail LH FLASHER YELLOW Socket yellow 2 CHASSIS WHITE Ring terminal to chassis 3 4 C2 PINK Buzzer 5 CAN LO BLACK Twisted pair 6 CAN HI RED to CAN 7 RH FLASHER GREEN Socket green 4 8 RH TAIL BROWN Socket brown 5 9 STOPS RED Socket red 6 0 LH TAIL BLACK Socket black 7 REVERSE YELLOW/WHITE 3-pin 8 or 2S 2 FOG BLUE Socket Blue 2 Twisted pair, CAN HI/CAN LO Butt crimp connectors Connections to CAN HI and CAN LO PosiTap connectors CAN HI: Green CAN LO: Brown. Or At OBDll, Pin (HI) and Pin 4 (LO) (Dependent on model). Page 7

Socket assemblies 3-pin socket 7-pin socket The orange wire from Pin 9 connects to terminal 3 of the module - unswitched 2S (Interior lights/battery charging) The grey wire from Pin 0 connects to terminals 4 and 5 of the module - switched 2S (Fridge) Overall length of the socket cable is determined by the installation requirements Wires from socket terminals and 2 and 4 to 8 connect to the module plug via the red butt crimp connectors Wires from socket terminals and 2 and 4 to 7 connect to the module plug via the red butt crimp connectors Overall length of the socket cable is determined by the installation requirements Entry grommet White to Chassis 3-pin socket Wires from pins 3, and 3 connect to the chassis (earth) 7-pin socket Page 8

Testing and Coding With the engine both running and at rest, test all functions Recoding adds C2 on dash; PDC; FCO or use pink wire from module and a buzzer for C2 (Coding is only required if CAN based C2, Bulb failure monitoring and Trailer present functions are needed.) (TF230GM SmartCAN unit will provide basic trailer light output, and switched power output without coding) Ryder Towing Quality Service Innovation Spimin House, Beacon Road, Poulton-le-Fylde, Lancs, FY6 8JE 0253 88008 www.rydertowing.co.uk mail@rydertowing.co.uk Page 9