This is to certify that CERTIFICATE Hardware Specialty Co., Inc. Quality Headquarters 430 Northboro Road Central, Marlborough, Massachusetts 01752 USA The above organization has been audited in accordance with the requirements of AS9104/1:2012. QMI-SAI Canada Limited (SAI Global) located in Toronto, Ontario, Canada is accredited under the Industry Controlled Other Party (ICOP) scheme. The certificate is issued at the accreditation location in Toronto, Canada. operates a Quality Management System ISO 9001:2008 + AS9120A for the following scope of certification International Distributor of Fasteners, Electronic Hardware and Electrical Components; Including Value Added Services and Managed Inventory Programs. Certificate No.: CERT-0087698 Original Certification Date: August 21, 2012 File No.: 003390 Certification Effective Date: August 20, 2015 Re-Issue Date: June 21, 2017 Certification Expiry Date: August 19, 2018 Nicole Grantham General Manager SAI Global Certification Services AS9120A QMI-SAI Canada Limited (SAI Global), 20 Carlson Court, Suite 200, Toronto, Ontario M9W 7K6 Canada. This registration is subject to the SAI Global Terms and Conditions for Certification. While all due care and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for proven negligence. This certificate remains the property of SAI Global and must be returned to them upon request.
.>>>>>>>>>>> CERTIFICATE This is to certify that Hardware Specialty Co., Inc. Quality Headquarters 430 Northboro Road Central Marlborough, Massachusetts 01752-1896 USA Refer to Attachment to Certificate of Registration dated December 23, 2015 for additional certified sites operates a Quality Management System ISO 9001:2008 for the following scope of registration International distributor of Fasteners, Electronic Hardware, Electrical Components including Value Added Services and Managed Inventory Programs. Certificate No.: CERT-0085579 Original Certification Date: March 27, 1995 File No.: 003390 Current Certification Date: Issue Date: December 23, 2015 Certificate Expiry Date: May 12, 2018 Heather Mahon Acting Head of Head of Policy, Risk and Certification ISO 9001 SAI Global Certification Services Pty Ltd, 680 George St, Level 37-38, Sydney, NSW, 2000, Australia with QMI-SAI Canada Limited, 20 Carlson Court, Suite 200, Toronto, Ontario M9W 7K6 Canada (SAI GLOBAL). This registration is subject to the SAI Global Terms and Conditions for Certification. While all due care and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for proven negligence. This certificate remains the property of SAI Global and must be returned to them upon request.
ATTACHMENT TO CERTIFICATE These sites are registered under Certificate No: CERT-0085579 issued on December 23, 2015 File No. 004151 Hardware Specialty Co., Inc. Corporate Headquarters 48-75 36th St Long Is City, New York 11101-1994 USA 004612 Hardware Specialty Co., Inc. 1701 Oakbrook Drive Norcross, Georgia 30093-1897 USA 014338 Hardware Specialty Co., Inc. 3700 Havana St. Suite 202 Denver, Colorado 80239-3242 USA 1054165 Hardware Specialty Co., Inc. 59-2 Central Avenue Farmingdale, New York 11735 USA 1054168 Hardware Specialty Co., Inc. 11800 Rojas Drive, Suite C-17 El Paso, Texas 79936 USA 1054170 Hardware Specialty Co., Inc. 7259 Bryan Dairy Road Largo, Florida 33777 USA 1054172 Hardware Specialty Co., Inc. 1951 Plaza Real Oceanside, California 92056 USA 1054173 Hardware Specialty Co., Inc. 5062 W. Ashland Way Franklin, Wisconsin 53132 USA 1054174 Hardware Specialty Co., Inc. 23 Corporate Circle E Syracuse, New York 13057 USA 1054175 Hardware Specialty Co., Inc. 4740 E Interstate Dr. Cincinnati, Ohio 45246 USA 1054176 Hardware Specialty Co., Inc. 1001 Lower Landing Road Suite 511 Blackwood, New Jersey 08012 USA 1645402 Hardware Specialty Co., Inc. Effective Date 4545 Enterprise St. Fremont, California 94538 USA. These registrations are dependent on Hardware Specialty Co., Inc. Quality Headquarters (File No. 003390) maintaining their scope of registration to ISO 9001:2008
ATTACHMENT TO CERTIFICATE These sites are registered under Certificate No: CERT-0085579 issued on December 23, 2015 1672314 Hardware Specialty Co., Inc. December 21, 2015 2615 West Casino Road Unit A5 Everett, Washington 98204 USA. These registrations are dependent on Hardware Specialty Co., Inc. Quality Headquarters (File No. 003390) maintaining their scope of registration to ISO 9001:2008
CERTIFICATE This is to certify that Hardware Specialty Co., Ltd Unit 2301-2303, 23F, Nanyang Plaza, 57 Hung To Rd. Kwun Tong Kowloon, Hong Kong Hong Kong operates a Quality Management System ISO 9001:2008 for the following scope of registration Distribution of fasteners, electronic hardware and electrical components. Certificate No.: CERT-0095662 Original Certification Date: June 3, 2013 File No.: 1630291 Current Certification Date: June 2, 2016 Issue Date: April 11, 2016 Certificate Expiry Date: September 14, 2018 Heather Mahon Acting Head of Policy, Risk and Certification ISO 9001 SAI Global Certification Services Pty Ltd, 680 George St, Level 37-38, Sydney, NSW, 2000, Australia with QMI-SAI Canada Limited, 20 Carlson Court, Suite 200, Toronto, Ontario M9W 7K6 Canada (SAI GLOBAL). This registration is subject to the SAI Global Terms and Conditions for Certification. While all due care and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for proven negligence. This certificate remains the property of SAI Global and must be returned to them upon request.
CERTIFICATE This is to certify that Hardware Specialty Co., Inc. 1001 Lower Landing Road, Suite 511 Blackwood, New Jersey 08012 USA operates an Environmental Management System ISO 14001:2004 for the following scope of certification The Environmental Management System as it applies to the International distribution of Fasteners, Electronic Hardware and Electrical Components including Value Added Services and Managed Inventory Programs. Certificate No.: CERT-0101322 Original Certification Date: June 2, 2008 File No.: 1054176 Certification Effective Date: May 30, 2017 Issue Date: March 28, 2017 Certificate Expiry Date: September 14, 2018 Nicole Grantham General Manager SAI Global Certification Services ISO 14001 QMI-SAI Canada Limited (SAI Global), 20 Carlson Court, Suite 200, Toronto, Ontario M9W 7K6 Canada. This registration is subject to the SAI Global Terms and Conditions for Certification. While all due care and skill was exercised in carrying out this assessment, SAI Global accepts responsibility only for proven negligence. This certificate remains the property of SAI Global and must be returned to them upon request.