NTT Communications Cloudⁿ Object Storage Operation Manual Ver.. Do not redistribute (distribute, reproduce or provide) the content listed in this document.
Versio n Edited date Ver..0 February 0, 03 Ver.. March 3, 0 Description of modification A new version (separated from the Cloudⁿ Storage User Guide) Cooperation with Cloudⁿ portal was added.
Contents. Introduction P4 - ) Overview of service ) Preparation in advance Operate the Storage Console P6- ) Start using the Storage service ) Start the Storage console 3) Terminate the Storage console 3 Manage the Bucket Object P3- ) Create the bucket ) Delete the bucket 3) Upload the object (file) 4) Delete the object 5) Publish the bucket and object 4 Manage the Account P- ) Set the account profile ) Confirm API key 5 Manage the User P4- ) Search a user 6 Confirm the Report P5- ) Display the usage report 3
Object Storage is the service to work with other Cloud n services to make the available storage object-oriented and enable control from API or control panel. This service allows you to introduce the inexpensive storage service with fewer limitations for Cloudⁿ account. Japan Data Center -) Overview of service Cloud n Virtual Server Service (Japan DC) Object Storage Storage location of object in Japan DC Storage location of object in USA DC Cloud n Virtual Server Service (USA DC) Cloud(N) control panel (Japan Data Center) Cloud(N) control panel (USA Data Center) Customer (Domestic site) Customer (Overseas site) Features of Object Storage are shown below. Excellent cost performance to store a large volume of data High robustness of 99.999999999% (-nine) You can use it without concerning upper limit of capacity. In addition to the control panel, it can be operated from API (compatible with S3 REST API)
"Guide for Cloudⁿ" -) Preparation in advance Prepare the followings before using Object Storage. Prepare the "Guide for Cloudⁿ " sent when you submitted a new application of Cloudⁿ. This section describes the client PC used at this Object Storage setup. Service to connect to Internet Prepare the service to connect to Internet. Example: Constant connection services such as OCN dial access service, OCN ADSL connection service and Super OCN. You can use other company Internet connection service. If you are using a proxy server in your company, confirm that "https (port No. 443)" is open. Software to browse the control panel (browser software) Firefox8.0. or later is recommended. Note that a part may be not shown in other browser. 5
-) Start using the Storage service In order to start using the Storage service, start using it from the Cloud n portal or control panel (only in West Japan/USA). Login method Start using from Cloudⁿ portal Log in the Cloudⁿ portal, and click [Start using] displayed by mouseover to [Sign Up Now ] icon in the region used. A pop-up screen showing the service is starting appears. Then the Object Storage console screen appears. 6
Login method Start using from control panel (only in West Japan/USA) -) Start using the Storage service the [Manage Users] tab in the control panel. Select the user who uses Object Storage and click " ". 7
3 -) Start using the Storage service [Submit] in order to make Object Storage available. 4 The screen of adding Storage account completed pops up. the [Close] button. 5 After the Storage account is added, log in the control panel with the appropriate user to show the [Storage console] tab, where you can move to the Storage console screen. 8
In order to start the Storage console, start it from the Cloud n portal or control panel (only in West Japan/USA). Login method Start from Cloudⁿ portal -) Start the Storage console Log in the Cloudⁿ portal, and click [Console] displayed by mouseover to [Object Storage] icon which you start using in the region used. The Storage console starts on a new window. 9
-) Start the Storage console Login method Start from control panel (only in West Japan/USA) the [Object Storage] button in the control panel. The Storage console starts on a new window. 0
-) Start the Storage console The following operations are available on the Storage console. [Management] tab (*) The following functions are available under this tab. - Manage the user. Enables to manage the user who uses Object Storage. [Explorer] tab The following functions are available under this tab. - Create and delete the bucket. Enables to create and delete the bucket on Object Storage, and set the access right. [Account] tab - Create and delete the object. Enables to create and delete the object for each bucket, and set the access right. The following functions are available under this tab. - Account profile Enables to set the profile of account. - Security certificate Enables to browse, disable and delete the access key and private key (secret key) required when using API, and create new keys. [Usage amount] tab (*) The following functions are available under this tab. - Usage amount report Enables to make the list, CSV and graph of current usage amount of Object Storage (capacity, transfer amount, number of requests, etc.) and browse the report. A user with the Domain User privilege created in West Japan and USA Data Centers cannot display the [Management] and [Usage fee] tabs.
Close the Storage console. -3) Terminate the Storage console [Log out] on the upper right portion of the Storage console. After logout, [Logout] is shown on the window and the screen is not closed automatically. Close the screen manually.
3-) Create the bucket Create a new bucket. the [Data Explorer] tab from the Object Storage control panel. Enter the name of bucket which you want to create and then click [Create]. You must set the bucket name so that it is unique through system. If you create the bucket with the name used by other user, an error is displayed. 3 Confirm that the bucket created is shown in [Object and folder]. 3
Delete the bucket. 3-) Delete the bucket the [Explorer] tab from the Object Storage control panel. Select the bucket which you want to delete from [Select a bucket] and click [Delete] to delete it. You cannot delete the bucket if it has an object. First delete the object in bucket and then delete the bucket. When you click [Delete], it is immediately deleted. Confirm carefully and then delete it. 4
Upload the object (file) to the bucket. 3-3) Upload the object (file) the [Explorer] tab from the Object Storage control panel. Select the bucket for which you want to create an object. When you want to create the object in folder, click the folder targeted in [Name]. In order to register the object, one or more buckets are necessary. 5
3 3-3) Upload the object (file) Select the file targeted from "Reference" and click [Upload the file]. The file size to upload the file from the Storage console is up to G due to limitation of recommended browser FireFox. If you desire to upload the file of more than G, use Object Storage API. In order to register the folder, enter the folder name and click [Create the folder]. 3 When uploading the HTML file, it can work as a static contents server. Confirm that the object registered in [Name] is shown. 6
Delete the object. 3-4) Delete the object the [Explorer] tab from the Object Storage control panel. Check the checkbox of object which you want to delete in [Select the bucket] and then click [Delete]. 3 The confirmation screen appears. [OK] to complete deletion. 7
Perform the public setting of bucket and object. The setting method is common to bucket and object. 3-5) Publish the bucket and object the [Explorer] tab from the Object Storage control panel. When you want to publish the bucket, select the target bucket in [Select the bucket] and click [Access right]. When you want to publish the object, check the checkbox of target object and click [Access right]. 3 When you add the user and group which can access to bucket or object, click [Add]. "Public" and "Storage_User" listed in the first line mean below: - Public Published on Internet. - Storage_User: Published to all customers who use Object Storage. 8
3 3-5) Publish the bucket and object When deleting the already existing user/group, check the checkbox of user/group which you want to delete and then click [Delete]. 4 When you click [Delete], it is immediately deleted. Confirm carefully and then delete it. When editing the public setting of user/group, edit the public setting by using the checkbox of target user or group respectively. By default, all public settings are allowed. -Readable: Allows to read the bucket or object. -Writable (only for bucket): Allows to write in the bucket. -ACP readable: Allows to read the access policy of bucket or object. -ACP writable: Allows to write in the access policy of bucket or object. If the public setting of bucket is different from object one, object one is preferred. The published object is accessible at URL below: http://[bucket name].str.cloudn-service.com/[(folder name/)object name] 9
5 3-5) Publish the bucket and object When setting the public URL for object, click [Public URL access]. You cannot set the public URL for bucket. 6 Set [Allow reading], [Issue the secure URL (https)], [Maximum number of downloading] and [Expiration date]. Set only [Allow reading], or both [Allow reading] and [Issue the secure URL (https)], and click [Save] to generate the URL. -Allow reading: Allows the access from external to the object. -Issue the secure URL (https): Allows the secure access from external to the object. -Maximum number of downloading: Sets the maximum number of downloading. -Expiration date: Sets the expiration date for access from external. 0
7 3-5) Publish the bucket and object After editing all public settings, click [Save] to terminate.
Set the account profile. This setting is not mandatory. 4-) Set the account profile the [Account] tab from the Object Storage control panel. Enter the account profile information and click [Save]. Account Profile was modified successfully" appears on top of screen. The setting of account profile is completed.
Confirm the access key and private key (secret key) required when using API. 4-) Confirm the API key the [Account] tab from the Object Storage control panel. the [Security Credentials] tab to display the access key ID. If you want to display the private key (Secret Key), click [View Secret Key] in the [Actions]. xxxxxxxxx 3 The private key (Secret Key) is displayed. xxxxxxxxx 3
5-) Search a user Search a user. the [Admin] tab from the Object Storage control panel. Enter and select the conditions to search the user and click [Search]. 3 The result is shown in [User List]. [View User Data] to display the bucket and object of user. 4
Display the usage amount of Object Storage as a report. 6-) Display the usage report the [Usage] tab from the Object Storage control panel. Enter in [Operation], [Time Period] and [Report Granularity] of report displayed, [Group ID] setting and [User]. -Operation: Select the type of report to be displayed from downstream data transfer (Data Transfer-In-Bytes), upstream data transfer (Data Transfer-In-Bytes), total capacity (Storage-Bytes), number of object (Storage-Objects), number of all requests (All Requests), number of requests received (Get Requests), number of requests sent (Put Requests) and number of requests deleted (Delete Requests). -Time Period: Select the period to be displayed from (Last week), (Last Month) and (Custom Period). When selecting "Custom Period", set the period. -Report Granularity: Select the unit of report to be displayed from (Hours), (Days), (Months) and actual data (Raw). -Group ID: Select the group ID in order to browse the report. -User: In order to browse a specific user, enter the user name. Do not use (Current Billing Period) and (Previous Billing Period) in [Time Period]. 5
6-) Display the usage report 3 [List] to display the result in the list format. You can download the same result in CSV format by clicking [Download CSV]. 4 [Graph] to display the result in the graph format. 6