CA NetMaster 12.1 1 CA RS 1406 Service List Description Type 12.1 RO67455 IST MESSAGES HAVE EXTRA BLANKS PTF RO67890 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF RO67995 NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38 PTF RO68205 IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING PTF RO69114 URCALL09 VFS FILE ERROR. ACTION=PUT PTF RO69117 RTP PIPE ARBMODE RED ALERT NOT CLEARED PTF RO69387 DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA PTF RO69440 TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE PTF RO69518 CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY PTF RO69535 COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE PTF RO69565 NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS PTF RO69768 $$SYSPRO PMON COMMAND IS MISSING REPORTS PTF RO69904 UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED PTF RO69983 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF RO69984 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF RO69985 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF RO70163 NO DATA SHOWN FOR RESOURCES IN RECOVERY PTF RO70450 OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY PTF The CA RS 1406 service count for this release is 18
CA NetMaster 12.0 2 CA RS 1406 Service List Description Type 12.0 RO70391 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF The CA RS 1406 service count for this release is 1
CA NetMaster 3 CA RS 1406 Service List for CC11C10 FMID Service Description Type CC11C10 RO68205 IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING PTF RO69117 RTP PIPE ARBMODE RED ALERT NOT CLEARED PTF RO69440 TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE PTF RO69518 CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY PTF RO69983 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF RO70450 OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY PTF The CA RS 1406 service count for this FMID is 6
CA NetMaster 4 CA RS 1406 Service List for CC17C10 FMID Service Description Type CC17C10 RO69984 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF The CA RS 1406 service count for this FMID is 1
CA NetMaster 5 CA RS 1406 Service List for CC18C10 FMID Service Description Type CC18C10 RO67455 IST MESSAGES HAVE EXTRA BLANKS PTF RO69565 NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS PTF RO70163 NO DATA SHOWN FOR RESOURCES IN RECOVERY PTF The CA RS 1406 service count for this FMID is 3
CA NetMaster 6 CA RS 1406 Service List for CC2D660 FMID Service Description Type CC2D660 RO70391 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF The CA RS 1406 service count for this FMID is 1
CA NetMaster 7 CA RS 1406 Service List for CC2D76R FMID Service Description Type CC2D76R RO69387 DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA PTF The CA RS 1406 service count for this FMID is 1
CA NetMaster 8 CA RS 1406 Service List for CC2D760 FMID Service Description Type CC2D760 RO67890 UPDATE ACCESS REQUESTED TO READ ONLY DATASETS PTF RO67995 NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38 PTF RO69114 URCALL09 VFS FILE ERROR. ACTION=PUT PTF RO69535 COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE PTF RO69768 $$SYSPRO PMON COMMAND IS MISSING REPORTS PTF RO69904 UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED PTF RO69985 IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 PTF The CA RS 1406 service count for this FMID is 7
CA NetMaster 12.1 9 CA RS 1406 - PTF RO67455 12.1 RO67455 RO67455 M.C.S. ENTRIES = ++PTF (RO67455) IST MESSAGES HAVE EXTRA BLANKS IST messages processed by PPOPROC that have multiple blanks in the message text are not correctly processed by AOM. TGPU and ADJCP resources are not updated to reflect the current status when VTAM messages are issued to indicate the status has changed. Network resources do not show the correct status. Issue a check against the resource to refresh the status. CA NetMaster Network Automation r12.1 NMAUTO 269 Copyright (C) 2014 CA. All rights reserved. R00234-NMS076-SP1 DESC(IST MESSAGES HAVE EXTRA BLANKS). FMID (CC18C10) SUP ( TR67455 )
CA NetMaster 12.1 10 CA RS 1406 - PTF RO67890 12.1 RO67890 RO67890 M.C.S. ENTRIES = ++PTF (RO67890) UPDATE ACCESS REQUESTED TO READ ONLY DATASETS When modifying any of the FILES category of Parameter Groups, UPDATE access is required for all datasets, including those that are designated as read only. When updating any of the FILES Parameter Groups, messages similar to the below are displayed on the Operating System log. ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.MODSDIS,N/A ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.PANLDIS,N/A ICH70004I USER(NETM) GROUP(NETMASTR) NAME(NETMASTR) ATTEMPTED 'UPDATE' ACCESS OF ENTITY 'hlq.modsdis' IN CLASS 'FACILITY' AT hh:mm:ss ON month day, year Users are unable to update FILES parameter groups without generating security violations. Modify the security profile of the NetMaster userid to have UPDATE authority for the affected datasets. CA NetMaster Network Management for SNA r12.1 CA NetMaster File Transfer Management r12.1 CA NetMaster Network Automation r12.1 CA NetMaster Network Management for TCP/IP r12.0 CA NetMaster Network Management for SNA r12.0 CA NetMaster File Transfer Management r12.0 CA NetMaster Network Automation r12.0 CA SOLVE:Operations Automation r11.9 CA SOLVE:Operations Automation for CICS r11.9 CA SOLVE:Access Session Management r5.0 NMS 1859 Copyright (C) 2014 CA. All rights reserved. R00243-NMS076-SP1 DESC(UPDATE ACCESS REQUESTED TO READ ONLY DATASETS). FMID (CC2D760) SUP ( RO51429 RO54519 TR51429 TR54519 TR67890 )
CA NetMaster 12.1 11 CA RS 1406 - PTF RO67995 12.1 RO67995 RO67995 M.C.S. ENTRIES = ++PTF (RO67995) NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38 WebCenter HTTP processing terminates when another product such as a port scanner detects a TCP/IP listener port and opens a connection. When using a port scanner against the WebCenter port that is configured to utilize SSL the following messages are seen in the Activity Log: NM3040 NCLID nnnnnn: $W3SV11H 744 ERROR 38 NM3042 ERROR INFORMATION... NM3050 ERROR-CODE: 38 NM3051 MESSAGE: NM4011 VARIABLE NAME IS INVALID: CONTAINS INVALID NM3052 COND-NAME: VARIABLE_ERROR NM3053 ERROR-LOC: $W3SV11H 744/10 NM3054 PROCEDURE: $W3SV11H NM3055 SOURCE: IF &&TEMP ^= '' THEN NM3060 SUBNAME: GLBL$W3REDIRHTTP: QUALYS_NULL_ OML Procedure terminates. None NMS 1866 Copyright (C) 2014 CA. All rights reserved. R00245-NMS076-SP1 DESC(NM3040 NCLID NNNNNN: $W3SV11H 744 ERROR 38). FMID (CC2D760) PRE ( RO55387 RO56669 RO64219 ) SUP ( TR67995 )
CA NetMaster 12.1 12 CA RS 1406 - PTF RO68205 12.1 RO68205 RO68205 M.C.S. ENTRIES = ++PTF (RO68205) IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING When the IPLOG is resized as part of the automatic delete and reorg process, a new IPLOG fails to be created if the file size exceeds the 4GB VSAM file limit. IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING RETURN CODE 140 REASON CODE 110 This message is generated and logged in the NetMaster activity log. IPLOG functions terminate and no logging of connections are performed to the IPLOG. None. CA NetMaster File Transfer Management r12.1 CA NetMaster Network Management for TCP/IP r12.0 CA NetMaster File Transfer Management r12.0 CA NetMaster Network Management for TCP/IP r11.7 CA NetMaster File Transfer Management r11.7 NMTIP 5108 Copyright (C) 2014 CA. All rights reserved. R00249-NMS076-SP1 DESC(IPLOG IGD306I UNEXPECTED ERROR DURING IGG0CLEV PROCESSING). FMID (CC11C10) SUP ( TR68205 )
CA NetMaster 12.1 13 CA RS 1406 - PTF RO69114 12.1 RO69114 RO69114 M.C.S. ENTRIES = ++PTF (RO69114) URCALL09 VFS FILE ERROR. ACTION=PUT TCP/IP Management Data is not sent to ReportCenter because the Parameter group $WR REPORTDATA fails to complete successfully. The Parameter group $WR REPORTDATA has a status of Failed during initialization and the following message is seen in the activity log: URCALL09 VFS file error. Action=PUT-$URDRC$JAVATASK1 FileRC=8/14 MSG= The ReportCenter server is not started and no new data is collected. Manually action the $WR REPORTDATA parameter group. NMS 1874 Copyright (C) 2014 CA. All rights reserved. R00258-NMS076-SP1 DESC(URCALL09 VFS FILE ERROR. ACTION=PUT). FMID (CC2D760) SUP ( TR69114 )
CA NetMaster 12.1 14 CA RS 1406 - PTF RO69117 12.1 RO69117 RO69117 M.C.S. ENTRIES = ++PTF (RO69117) RTP PIPE ARBMODE RED ALERT NOT CLEARED Alerts from Event Detector RTPRED5M for RTP ARBMODE RED are not cleared when the ARBMODE RED condition has cleared. The PROCESSRTPCLEAR routine in monitor task $IPPM53Z does not determine the CPNAME and thus uses the last value set which can be incorrect. Alerts for "RTP Pipe ARBmode RED >5m" are not cleared when the ARBMODE is no longer red. Alerts give an incorrect indication of ARBMODE RED condition. None CA NetMaster Network Management for TCP/IP r12.0 CA NetMaster Network Management for TCP/IP r11.7 CA NetMaster Network Management for TCP/IP r11.6 NMTIP 5060 Copyright (C) 2014 CA. All rights reserved. R00259-NMS076-SP1 DESC(RTP PIPE ARBMODE RED ALERT NOT CLEARED). FMID (CC11C10) PRE ( RO51529 RO62460 ) SUP ( RO51114 TR51114 TR69117 )
CA NetMaster 12.1 15 CA RS 1406 - PTF RO69387 12.1 RO69387 RO69387 M.C.S. ENTRIES = ++PTF (RO69387) DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA The Netmaster ReportCenter Data Warehouse Resource Status Report fails when DB2 is run with DECIMAL=COMMA. When generating the Data Warehouse Resource Status Report the following error occurs when processing section 8, subsection 1 of the report: com.ibm.db2.jcc.am.sqlsyntaxerrorexception: Ýjcc Ý50053 Ý12311 Ý3.65.96 T2zOS exception: Ýjcc ÝT2zos T2zosStatement.readPrepareDescribeOutput_:nativePrepareInto: 1582: DB2 engine SQL error, SQLCODE = -104, SQLSTATE = 42601, error tokens =,3;AT MICROSECONDS MICROSECOND SECONDS SECOND MINUTES MINUTE HOURS ERRORCODE=-104, SQLSTATE=42601 SQL code: -104, SQL state: 42601 Ýjcc Ý50053 Ý12311 Ý3.65.96 T2zOS exception: Ýjcc ÝT2zos T2zosStatement.readOpenQueryInternal:nativeOpen:8542: DB2 engine SQL error, SQLCODE = -514, SQLSTATE = 26501, error tokens = SQL_CURLH100C3 ERRORCODE=-514, SQLSTATE=26501 Query text: select distinct rlevel0, rlevel1, ridentifier, rrelated1, rsubelement, raddress, paname, NETM.resource.resource from NETM.resource, NETM.performanceagent where NETM.resource.rclass = 'IPOSAM' and NETM.resource.rperformanceagent = NETM.performanceagent.performanceagent order by 1,2,3,4,5,6,7,8 The Data Warehouse Resource Status Report is not available. None. CA NetMaster File Transfer Management r12.1 CA NetMaster Network Automation r12.1 NMS 1879 Copyright (C) 2014 CA. All rights reserved. R00263-NMS076-SP1 DESC(DATA WAREHOUSE RESOURCE STATUS REPORT FAILS IF DECIMAL=COMMA). FMID (CC2D76R) SUP ( TR69387 ) TEXT LINK('../nm/reporter/wr76/reports/definitions/DWSR esstat.xml') PARM(PATHMODE(0,6,6,4)).
CA NetMaster 12.1 16 CA RS 1406 - PTF RO69440 12.1 RO69440 RO69440 M.C.S. ENTRIES = ++PTF (RO69440) TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE When a local and remote system stack have the same name, a TRS command issued against the remote stack obtains the interface results from the local stack. A TRS command issued against a remote stack displays the local stack interface data. No remote stack interface data can be viewed. None. NMTIP 5217 Copyright (C) 2014 CA. All rights reserved. R00265-NMS076-SP1 DESC(TRS CMD ON STACK SHOWS INCORRECT REMOTE INTERFACE). FMID (CC11C10) PRE ( RO51922 RO55386 RO56668 RO57250 RO67473 ) SUP ( TR69440 )
CA NetMaster 12.1 17 CA RS 1406 - PTF RO69518 12.1 RO69518 RO69518 M.C.S. ENTRIES = ++PTF (RO69518) CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY Chorus Software Manager (CSM) Software Configuration Service fails during NetMaster NM for TCP/IP implementation. The runtime EXEC library does not have sufficient directory blocks allocated to cater for the copy step, and the failure information is overwritten by concurrently running steps. The copy to runtime EXEC library step has a status of FAILED. NetMaster NM for TCP/IP cannot be implemented using the Software Configuration Service. Execute the creation of the runtime EXEC library using the SET MANUAL option and then create the library with the required size outside of Chorus Software Manager. CA NetMaster Network Mgmt For TCP/IP Release 12.1 NMTIP 5219 Copyright (C) 2014 CA. All rights reserved. R00266-NMS076-SP1 DESC(CSM CONFIGURATION FAILS BUILDING RUNTIME EXEC LIBRARY). FMID (CC11C10) PRE ( RO52308 RO53359 RO53440 RO54290 ) SUP ( TR69518 )
CA NetMaster 12.1 18 CA RS 1406 - PTF RO69535 12.1 RO69535 RO69535 M.C.S. ENTRIES = ++PTF (RO69535) COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE When a resource is copied from one system image to another system image, replacing a resource of the same name, and resource fields have been modified, the resource on the target system image does not contain the updated fields. A newly copied resource does not contain all of the updated fields. Resources are not monitored properly as the resource fields are incorrect. The resource must be manually updated before taking effect. CA NetMaster File Transfer Management r12.1 CA NetMaster Network Automation r12.1 NMS 1881 Copyright (C) 2014 CA. All rights reserved. R00267-NMS076-SP1 DESC(COPIED RESOURCE DOES NOT REPLACE ALL FIELDS IN OTHER IMAGE). FMID (CC2D760) SUP ( TR69535 )
CA NetMaster 12.1 19 CA RS 1406 - PTF RO69565 12.1 RO69565 RO69565 M.C.S. ENTRIES = ++PTF (RO69565) NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS When a message triggers Dynamic Discovery the Discovery routine in $RSDBMS (Network Database Manager) may run at the same time as other processing for the same resource. The RES-UPDATE routine can be driven twice for the same state change resulting in a duplicated adjustment of resource counters. The Network Summary display (/SNASUM) has negative or incorrect counts. Network Summary counts are not reliable. None. CA NetMaster Network Automation r12.1 NMAUTO 272 Copyright (C) 2014 CA. All rights reserved. R00268-NMS076-SP1 DESC(NETWORK SUMMARY DISPLAY HAS NEGATIVE RESOURCE COUNTS). FMID (CC18C10) PRE ( RO68874 ) SUP ( TR67727 TR68059 TR68285 TR68301 TR68656 TR68661 TR68854 TR69565 )
CA NetMaster 12.1 20 CA RS 1406 - PTF RO69768 12.1 RO69768 RO69768 M.C.S. ENTRIES = ++PTF (RO69768) $$SYSPRO PMON COMMAND IS MISSING REPORTS $$SYSPRO PMON diagnostic command does not wait for the monitor to finish causing errors on the generated reports. $$SYSPRO PMON output contains following error messages: Performance Monitor Information N14K30 ##PMON REPORT LAST FAILED - NO REPORTS FOUND. PMON REPORT TASK=NCL N14K30 ##PMON REPORT LAST FAILED - NO REPORTS FOUND. PMON REPORT TASK=NCL LEVEL=STMT N14K30 ##PMON REPORT LAST FAILED - NO REPORTS FOUND. PMON REPORT LEVEL=CSECT N14K30 ##PMON REPORT LAST FAILED - NO REPORTS FOUND. PMON REPORT LEVEL=USER LIMIT=30 N14K30 ##PMON REPORT LAST FAILED - NO REPORTS FOUND. Diagnosis of PMON related problems cannot be achieved via the $$SYSPRO PMON command. Issue ##PMON START command, wait a specified timeframe as provided by L1 or L2 support, and then issue ##PMON STOP command. CA NetMaster File Transfer Management r12.1 CA NetMaster Network Management for SNA r12.1 CA NetMaster Network Automation r12.1 NMS 1882 Copyright (C) 2014 CA. All rights reserved. R00270-NMS076-SP1 DESC($$SYSPRO PMON COMMAND IS MISSING REPORTS). FMID (CC2D760) PRE ( RO52149 RO60268 RO64219 ) SUP ( RO66980 TR66980 TR69768 )
CA NetMaster 12.1 21 CA RS 1406 - PTF RO69904 12.1 RO69904 RO69904 M.C.S. ENTRIES = ++PTF (RO69904) UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED The WebCenter Interface PORT cannot be set to NONE to disable the use of WebCenter unless PROD=RSS is specified in the RUNSYSIN. When updating the $NM WEBCENTER parameter group with the Interface Port set to NONE a validation error panel is displayed. The validation panel contains the following information: Field Description Error Message Enable RSS Feeds BAIPWI40 Enable RSS Feeds require WebCenter There is no available option to disable RSS Feeds to avoid this validation error. WebCenter access cannot be disabled by an Administrator. Specify PROD=RSS in the RUNSYSIN member. CA NetMaster File Transfer Management r12.1 NMS 1875 Copyright (C) 2014 CA. All rights reserved. R00271-NMS076-SP1 DESC(UNABLE TO SET IPORT=NONE IF PROD=RSS IS NOT SPECIFIED). FMID (CC2D760) PRE ( RO61458 RO64219 ) SUP ( RO53960 RO65860 TR53960 TR65860 TR69904 )
CA NetMaster 12.1 22 CA RS 1406 - PTF RO69983 12.1 RO69983 RO69983 M.C.S. ENTRIES = ++PTF (RO69983) IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 Abends occur because insufficient storage is available for the Initialization Log. Several parameter groups record all activity, such as daily cleanups and archives, to the Initialization Log. After many months the Initialization Log can become so large that not enough storage is available. The NetMaster region ABENDs: IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 NETMSTR NETMSTR 00 The NetMaster region ABENDs. None. CA NetMaster File Transfer Management r12.1 CA NetMaster Network Management for SNA r12.1 CA NetMaster Network Automation r12.1 NMS 1883 Copyright (C) 2014 CA. All rights reserved. R00272-NMS076-SP1 DESC(IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10). FMID (CC11C10) SUP ( RO68205 TR68205 TR69983 ) ++IF FMID(CC17C10) REQ( RO69984). ++IF FMID(CC2D760) REQ( RO69985).
CA NetMaster 12.1 23 CA RS 1406 - PTF RO69984 12.1 RO69984 RO69984 M.C.S. ENTRIES = ++PTF (RO69984) IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 Abends occur because insufficient storage is available for the Initialization Log. Several parameter groups record all activity, such as daily cleanups and archives, to the Initialization Log. After many months the Initialization Log can become so large that not enough storage is available. The NetMaster region ABENDs: IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 NETMSTR NETMSTR 00 The NetMaster region ABENDs. None. CA NetMaster File Transfer Management r12.1 CA NetMaster Network Management for SNA r12.1 CA NetMaster Network Automation r12.1 NMS 1883 Copyright (C) 2014 CA. All rights reserved. R00272-NMS076-SP1 DESC(IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10). FMID (CC17C10) SUP ( TR69984 ) ++IF FMID(CC2D760) REQ( RO69985). ++IF FMID(CC11C10) REQ( RO69983).
CA NetMaster 12.1 24 CA RS 1406 - PTF RO69985 12.1 RO69985 RO69985 M.C.S. ENTRIES = ++PTF (RO69985) IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 Abends occur because insufficient storage is available for the Initialization Log. Several parameter groups record all activity, such as daily cleanups and archives, to the Initialization Log. After many months the Initialization Log can become so large that not enough storage is available. The NetMaster region ABENDs: IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10 NETMSTR NETMSTR 00 The NetMaster region ABENDs. None. CA NetMaster File Transfer Management r12.1 CA NetMaster Network Management for SNA r12.1 CA NetMaster Network Automation r12.1 NMS 1883 Copyright (C) 2014 CA. All rights reserved. R00272-NMS076-SP1 DESC(IEA705I ERROR DURING GETMAIN SYS CODE = 80A-10). FMID (CC2D760) PRE ( RO68039 ) SUP ( TR69985 ) ++IF FMID(CC17C10) REQ( RO69984). ++IF FMID(CC11C10) REQ( RO69983).
CA NetMaster 12.1 25 CA RS 1406 - PTF RO70163 12.1 RO70163 RO70163 M.C.S. ENTRIES = ++PTF (RO70163) NO DATA SHOWN FOR RESOURCES IN RECOVERY On the "Network Summary" display, when the number of "Resources in Recovery" is greater than zero, selecting that field and pressing Enter does not present a list of the resources. Placing the cursor in the "Resources in Recovery" field and pressing Enter always returns the message "No Data to Display" regardless of the number of resources in the "Resources in Recovery" field. It is difficult to determine the names and types of resources currently being recovered. While in the "Network Summary" display press "F5=Filter" or enter the Primary Command "Filter" and specify the following criteria to get a list of the resources currently in recovery: "(" Field Opr Value INREC EQ YES CA NetMaster Network Automation r12.1 NMAUTO 271 Copyright (C) 2014 CA. All rights reserved. R00276-NMS076-SP1 DESC(NO DATA SHOWN FOR RESOURCES IN RECOVERY). FMID (CC18C10) SUP ( TR69354 TR70147 TR70163 )
CA NetMaster 12.1 26 CA RS 1406 - PTF RO70450 12.1 RO70450 RO70450 M.C.S. ENTRIES = ++PTF (RO70450) OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY When OSA devices are defined to a stack as Interfaces rather than Devices, they are listed as Links on the Device Links List panel. No commands are available to Activate or Inactivate Links, so these commands must be entered for the Device Name field. An invalid name for the Interface is used in the command. The wrong name is used when Activating or Inactivating Stack OSA Interfaces from the Device Name field which results in the command failing. OSA Interfaces cannot be Activated from the Device Links display. None. NMTIP 5218 Copyright (C) 2014 CA. All rights reserved. R00278-NMS076-SP1 DESC(OSA INTERFACES CANNOT BE ACTIVATED FROM DEVICE DISPLAY). FMID (CC11C10) PRE ( RO51529 RO52148 RO53296 RO55386 RO56668 RO57250 RO58457 RO60432 RO64218 RO64657 RO69389 ) SUP ( RO50817 RO63768 RO63995 TR50817 TR60269 TR63768 TR63995 TR69332 TR70450 ) ++HOLD (RO70450) SYSTEM FMID(CC11C10) REASON (ACTION ) DATE (14148) COMMENT ( +----------------------------------------------------------------------+ CA NetMaster Network Mgmt For TCP/IP Release 12.1 +----------+-----------------------------------------------------------+ SEQUENCE After Apply. +----------+-----------------------------------------------------------+ PURPOSE Copy the updated MOD@$IP from the SMP/E target dataset into the product run-time MODSDIS VSAM dataset. +----------+-----------------------------------------------------------+ USERS All users. AFFECTED +----------+-----------------------------------------------------------+ KNOWLEDGE JCL customization. REQUIRED +----------+-----------------------------------------------------------+ ACCESS 1. Target libraries. REQUIRED 2. Product region MODSDIS VSAM dataset. +----------+-----------------------------------------------------------+ ************************** * STEPS TO PERFORM * ************************** 1. Copy the sample JCL below to a dataset. 2. Modify the sample JCL to meet your site's requirements. 3. In the scheduled maintenance window, stop all product regions that reference the MODSDIS VSAM dataset. 4. Submit the modified JCL to update the product region MODSDIS VSAM dataset. 5. Start the product regions that were stopped. //MYUSERV JOB ACCT,CLASS=A,MSGCLASS=X,NOTIFY=&SYSUID //NMVIP EXEC PGM=NMVIP //STEPLIB DD DISP=SHR,DSN=&TGTPREF.CC2DLOAD //MODSIN DD DISP=SHR,DSN=&TGTPREF.CC11VSMI(MOD@$IP)
CA NetMaster 12.1 27 CA RS 1406 - PTF RO70450 //MODSOUT DD DISP=SHR,DSN=&DSNPREF.MODSDIS //SYSPRINT DD SYSOUT=* //SYSIN DD * COPY MODS INDD=MODSIN OUTDD=MODSOUT OPT=INSTALL //* ).
CA NetMaster 12.0 28 CA RS 1406 - PTF RO70391 12.0 RO70391 RO70391 M.C.S. ENTRIES = ++PTF (RO70391) DESC (UPDATE ACCESS REQUESTED TO READ ONLY DATASETS) /* When modifying any of the FILES category of Parameter Groups, UPDATE access is required for all datasets, including those that are designated as read only. When updating any of the FILES Parameter Groups, messages similar to the below are displayed on the Operating System log. ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.MODSDIS,N/A ACF99913 ACF2 VIOLATION-04,09,NETM,,hlq.PANLDIS,N/A ICH70004I USER(NETM) GROUP(NETMASTR) NAME(NETMASTR) ATTEMPTED 'UPDATE' ACCESS OF ENTITY 'hlq.modsdis' IN CLASS 'FACILITY' AT hh:mm:ss ON month day, year Users are unable to update FILES parameter groups without generating security violations. Modify the security profile of the NetMaster userid to have UPDATE authority for the affected datasets. CA NetMaster Network Management for SNA r12.1 CA NetMaster File Transfer Management r12.1 CA NetMaster Network Automation r12.1 CA NetMaster Network Management for TCP/IP r12.0 CA NetMaster Network Management for SNA r12.0 CA NetMaster File Transfer Management r12.0 CA NetMaster Network Automation r12.0 CA SOLVE:Operations Automation r11.9 CA SOLVE:Operations Automation for CICS r11.9 CA SOLVE:Access Session Management r5.0 */. ++VER(Z038) FMID(CC2D660) PRE(RO33420 RO55497) SUP(TZ58293). ++IF FMID(CC2D660) THEN REQ(RO25810).