Liquid Handling Systems MICROPIPETTES NOW IN Excel Series BOROSIL GLASS WORKS LIMITED. an ISO 9001: 8 certified company Fixed Variable Variable Variable Single Channel Single Channel Multi Channel (8 Channel ) Multi Channel (12 Channel ) Fully Autoclavable Comfortable gripping Superior ergonomic design Extremely high accuracy and precision levels Guarantees repeatable results Individually calibrated with Calibration report and totally conforming to ISO 86 standards Enhanced spring mechanism for smoother plunger movement Improved digital display with much smaller increments for variable pipettes Deutsche Akkreditierungsstelle
MICROPIPETTES Excel - SINGLE CHANNEL FULLY AUTOCLAVABLE Borosil brand MICROPIPETTES are Constructed of high quality plastic, combined with stainless steel piston, to ensure many years of dependable service. Individually calibrated as per procedure laid down in ISO 86 standards - A calibration report is provided with each pipette. Provided with Accuracy and Precision values which are better than those laid down in ISO 86 standards. Manufactured under strict Quality Control and GMP Norms. Provided with free individual micropipette hanger and calibration tool. Provided with attractive Colour coding for easy identification. Plunger Easy Adjustment Constructed to ensure easy volume adjustment by turning the plunger even when wearing gloves plunger does not snag gloves. User Adjustment Constructed such that recalibration can be performed easily by the user. Superior Ergonomic Design New body design with comfortable gripping and improved ergonomy ensure comfortable operations with minimal fatigue. Digital Display READY POSITION FIRST STAGE SECOND STAGE Two step plunger operation This facilitates super blow out from the tip (last drop dispensing), resulting in very high accuracy and precision. This also permits reverse pipetting and repetitive pipetting. Improved Digital Display with second decimal place and smaller increments for variable pipettes ensure increased applications. The soft clicking sound at every increment results in perfect volume setting without any worry for any accidental change during pipetting. This also facilitates volume changes with a single handed operation. Tip Ejector Constructed such that the built in streamlined tip ejector facilitates easy tip ejection and access to narrow necked bottles and tubes.
MICROPIPETTES Excel - FIXED VOLUME SINGLE CHANNEL FULLY AUTOCLAVABLE Keeping pace with the rapid technological progress, BOROSIL proudly presents a new range of high end fully autoclavable micropipettes for sophisticated users in the field of Microbiology, lmmunology, Cell Culture, Analytical Chemistry, Biochemistry and other areas. SPECIFICATIONS Product Code Accuracy Coefficient of Variance (CV) <_% *Fits tips upto **Price and and and and Pipetting Preparations Use the tip specified by the manufacturer. Ensure that the micropipette and tip have been tested according to ISO 86 Standards and the tip is fitted correctly. Make sure that the micropipettes are correctly calibrated. Ensure that the micropipette, tip and liquid are all at the same temperature. When pipetting liquids with temperatures different to the ambient temperature kindly pre-rinse the tip and change the tip after each pipetting. Ensure that any fluid viscosity variations have been accounted for and the correct technique is employed, i.e. reverse pipetting. If handling infectious or radioactive agents make sure appropriate shielding and other precautions protect the operator.
MICROPIPETTES Excel - VARIABLE VOLUME SINGLE CHANNEL FULLY AUTOCLAVABLE BOROSIL presents an exclusive range of extremely high precision Variable fully autoclavable Micropipettes for today s discerning users in the field of Microbiology, lmmunology, Cell Culture, Analytical Chemistry, Biochemistry and other areas. SPECIFICATIONS Product Code range Increment Accuracy Coefficient of Variance (CV) <_% *Fits tips upto **Price 0.002 12.0 6.0 2. 1. 1. and * Micropipettes of capacities 0. to.0 are fitted with tip cones to accept tips. However for enhancing precision and accuracy, it is recommended to use tips of in which case it should be seperately specified so that the tip cone can be supplied accordingly. Pipetting Action Hold the micropipette in a vertical position. Tilting the micropipette at an angle causes a volume greater than set volume of liquid to enter the tip. Pre-rinsing of tip is always recommended. When aspirating fluid the micropipette tip should normally be immersed to a depth of 2-3 mm. It is recommended to pipette against the inside wall of the receiving vessel. Remove the tip by drawing it up against the inside wall. Ensure that the micropipette blowout action is fully activated, while dispensing only. Ensure that the volume is still set at the required position Avoid leaving the micropipette on its side with liquid in the tip, which might seep back into the mechanism. Rack the micropipette when not in use. Avoid dropping the micropipette or allowing contact with dirt or grease. Never strike the tip cone against the tip tray when mounting the tip, as this can damage the micropipette. Avoid exposing the unit to extreme temperature changes, humidity and dust (Operating temperatures are from1 C to 40 C). Clean the micropipette thoroughly before sending to service.
MICROPIPETTES Excel - VARIABLE VOLUME MULTICHANNEL FULLY AUTOCLAVABLE Highly recommended for Elisa, Molecular screening, Kinetic studies, DNA amplifications and other applications. Borosil brand MULTICHANNEL MICROPIPETTES offer 8-Channel 12-Channel High accuracy and performance conforming to ISO 86 standards individually calibrated with individual calibration report Comfortable gripping Superior Ergonomic Design Improved digital display upto second decimal place The soft clicking sound at every increment results in perfect volume setting without any worry for accidental changes during pipetting. This system also facilitates volume changes with a single handed operation. Easy User recalibration Optimum piston - spring balance for smooth plunger movement 360 rotational lower assembly provides flexibility during operation. Easy sequential tip ejection. Free tray specifically designed for minimal use of reagents / chemicals during filling Available in all standard volume ranges. SPECIFICATIONS 8-Channel Fully Autoclavable Product Code Range Inc. Vol. Acc. CV Fits tips upto **Price LH007111 Lh007112 Lh007119 Lh007113016 Lh0071130 Lh007113022 0. - 2 - -0-0 - 40-1 2 2 0 0 0 0 40 10 2.0 2.0 0.2 0.2
SPECIFICATIONS 12-Channel Fully Autoclavable Product Code Range Inc. Vol. Acc. CV Fits tips upto Price Lh007114001 0. - 1 2.0 2.0 Lh007114002 2-2 Lh007114009-0 2 0 Lh007114016-0 0 0 Lh0071140-0 Lh007114022 40-40 0.2 10 0.2 ** ALL PRICES MENTIONED ARE EXCLUSIVE OF TAXES BOROSIL GLASS WORKS LIMITED. an ISO 9001: 8 certified company Corporate Office: 11, Crescenzo, G- Block, Opp. MCA Club, Bandra Kurla Complex, Bandra (E), Mumbai 400 01, India. Phone : 022-6740 6 Fax : 022-6740 614 Email : borosil@borosil.com Website : www.borosil.com Sales Offices: MUMBAI : th Block No.403/404, 4 Floor, Kaliandas Udyog Bhavan Near Century Bazar, Prabhadevi, Mumbai - 400 02 Phone : 022-6740 6400 Fax : 022-6740 6444 Email : mumbaisales@borosil.com CHENNAI : st New No. (Old No. 9), 1 Floor, Bragadammal Road, Nungambakkam, Chennai - 600 034 Phone : 044-2822 6012 / 2822 6013 Fax : 044-2822 6014 Email : chennai@borosil.com KOLKATA : th Dabriwala House, 4 Floor, C Middleton Row, Kolkata - 700 071. Phone : 033-2229 9166 / 2249 74 Fax : 033-2226 4 Email : calcutta@borosil.com AHMEDABAD : 306, Sarkar V, Behind Natraj Cinema, Off Ashram Road, Ahmedabad - 380 009 Phone : 079-6661 317 Email : mumbaisales@borosil.com DELHI : 19/90, P Block, Connaught Circus New Delhi - 1 001. Phone : 011-2334 3897 / 2374 2136 Fax : 011-2374 6689 Email : delhi@borosil.com LHS Excel Series / 01 / 7000 Nos / Jan 13