Cisco ASR 000 Series Router Specifications This appendix provides router specifications and cable assemblies and pinouts for the cables shipped with the Cisco ASR 000 Series Aggregation Services Routers. This appendix contains the following sections: Cisco ASR 00-HX and Cisco ASR 00-HX Router Specifications, page Cisco ASR 00X and Cisco ASR 009X Router Specifications, page Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router Specifications, page Cisco ASR 00 Router, Cisco ASR 00-F Router, and Cisco ASR 00-X Router Specifications, page Cisco ASR 0 Router Specifications, page Cisco ASR 00 Router Specifications, page Cisco ASR 00-HX and Cisco ASR 00-HX Router Specifications For information about specifications for Cisco ASR 00-HX and Cisco ASR 00-HX Router, see Cisco ASR 00-HX Router and Cisco ASR 00-HX Router Hardware Installation Guide. Cisco ASR 00X and Cisco ASR 009X Router Specifications For information about specifications for Cisco ASR 00X and Cisco ASR 009X Router, see Cisco ASR 009-X Router and Cisco ASR 00-X Hardware Installation Guide. Cisco ASR 00 Router Specifications This section lists the specifications for the Cisco ASR 00 Router. Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00 Router Memory and Storage Options Cisco ASR 000 Series Router Specifications Table : Cisco ASR 00 Router Specifications The following table lists the Cisco ASR 00 Router physical specifications. Midplane Dimensions (H x W x D) Weight Nominal operating temperature Specification Connects the Cisco ASR 000 Series RP, Cisco ASR 000 Series ESP, Cisco ASR 000 Series SPA Interface (SIP), SPAs, and power supplies together in the system Height = 0. in. (. cm) Width =. in.(. cm) Depth =.0 in. (. cm) Note Fully loaded chassis: 09. pounds (9. kg) Only chassis: pounds (.kg) Using the Cisco ASR000-ESP00 instead of the Cisco ASR000-ESP0 adds. lbs to the total weight of the router. to 0 F to 0 C Nominal operating humidity Storage temperature 0% to % to 0 F 0 to 0 C Power consumption Maximum DC: 00W Maximum AC: 00W Maximum (Out): W Cisco ASR 00 Router Memory and Storage Options The following table lists the hardware memory and storage options supported on the Cisco ASR 00 Router. Table : Memory and Storage Options for Cisco ASR 00 Router Memory Type RP Default GB DRAM Maximum System Support GBDRAM Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Ethernet RJ- Port outs Memory Type eusb Default GB (Partitioned: xmb for NVRAM and the remaining for mass storage Maximum System Support Hard disk drive 0 GB for code storage or solid-state drive GB support Cisco ASR 00 Router Ethernet RJ- Port outs The Cisco ASR 00 Router has an RJ- port for the 0/00/000 Ethernet connection. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. The following figure shows an RJ- port and connector. Figure : RJ- Port and Connector for Cisco ASR 00 Router RJ- connector Cisco ASR 00 Router MGMT Ethernet Port outs The following table lists the RJ- port pinout for the front panel Management Ethernet port. Table : RJ- Management Ethernet Port outs TX Data+ Out TX Data Out RX Data+ In, NC RX Data In Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00 Router BITS Port s and outs Cisco ASR 000 Series Router Specifications, NC Cisco ASR 00 Router BITS Port s and outs The following table lists the pinouts of the Building Integrated Timing Supply (BITS) RJ port on the Cisco ASR 00 Router. Table : BITS RJ- Receptacle outs for Cisco ASR000-RP RX Ring Receive Ring RX Receive (T/E), TX Ring Unused TX Unused, The following table lists the pinouts of the Building Integrated Timing Supply (BITS) and the DOCSIS Timing Interface (DTI) RJ port on the Cisco ASR000-RP front panel. Table : BITS RJ- Receptacle outs for Cisco ASR000-RP RX Ring /Bi (DTI) Receive Ring/Bidirectional DTI RX TIP /Bi (DTI) Receive TIP (T/E) Bidirectional DTI, TX Ring Transmit Ring/Bidirectional DTI TX Transmit TIP (T/E) Bidirectional DTI, Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Console Port s and outs Cisco ASR 00 Router Console Port s and outs The following table lists the pinouts of the dual RJ- ports for the front panel console port. Table : Console Port outs for Cisco ASR 00 Router RTS Out Request to Send (tied to pin, CTS) DTR Out Data Terminal Ready (always On) TXD Out Ring Indicator RXD In DSR In Data Terminal Ready CTS In Clear to Send (tied to pin, RTS) Cisco ASR 00 Router Auxiliary Port s and outs The following table lists the pinouts of the dual RJ- ports for the auxiliary port signals. Table : Auxiliary Port outs for Cisco ASR 00 Router RTS Out Request to Send DTR Out Data Terminal Ready (always On) TXD Out RI Ring Indicator Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00 Router DB- out Assignments for Relays Cisco ASR 000 Series Router Specifications RXD In DSR/DCD In Data Set Ready/Data Carrier Detect CTS In Clear to Send Cisco ASR 00 Router DB- out Assignments for Relays The alarm ports for the Cisco ASR 00 Router (Cisco ASR 00 Router and Cisco ASR 0 Router) power supplies reside on the DB- connector on the face of the power supply. The alarm ports are relay contact closures that the IOS environmental software controls. The environmental monitoring functions of the system can include voltage and temperature monitoring for the router installed components and failure sensing for power supply fan tray. Any alarms that light the front panel LEDs on the Cisco ASR000-RP causes a contact closure between the corresponding pins within the DB- alarm port of both power supplies. In the DB- connector, each alarm consists of a three-pin set containing a common pin, a normally open pin, and a normally closed pin. The connections that describe alarm activity are off (Common is connected to normally closed and normally open is disconnected) and on (Common is connected to normally open and normally closed is disconnected). The following table lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB- connector. Table : Cisco ASR 00 Router DB- Connector out Assignments Common (CM) Normally Open (NO) Normally Closed (NC) SPARE CRTAA Critical Audible MAJAA Major Audible MINAA Minor Audible CRTVA Critical Visual 9 MAJVA Major Visual 0 MINVA Minor Visual 9 Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Specifications Common (CM) Normally Open (NO) Normally Closed (NC) SPARE SPARE SPAREunused pin reserved for future use 0,,,,,, Cisco ASR 00 Router Specifications This section lists the specifications for the Cisco ASR 00 Router. The following table lists the Cisco ASR 00 Router physical specifications. Table 9: Cisco ASR 00 Router Specifications Midplane Dimensions (H x W x D) Weight Specification Connects the Cisco ASR 000 Series RP, ASR 000 Series ESP, Cisco ASR 000 Series SPA Interface (SIP), SPAs, and power supplies together in the system Height = in. (. cm) (RU rack-mount per EIA RS-0) Width =. in. (. cm) (9 inch rack-mount or optional Telco rack- mount) Depth =.0 in. (. cm) (including card handles, cable-management brackets and power supply handles) Fully loaded chassis: 0 pounds (.9 kg) Only chassis: pounds (. kg) Nominal operating temperature to 0 F to 0 C Nominal operating humidity Storage temperature 0% to % to 0 F 0 to 0 C Power consumption Maximum DC: 00W Maximum AC: 90W Maximum (Out): W Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00 Router Memory and Storage Options Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Memory and Storage Options The following table lists the hardware memory and storage options supported on the Cisco ASR 00 Router. Table 0: Memory and Storage Options for Cisco ASR 00 Router Memory Type RP eusb Default GB DRAM GB (Partitioned: xmb for NVRAM and the remaining for mass storage Maximum System Support GBDRAM For mass storage: hard disk drive 0 GB or solid-state drive Gb support Cisco ASR 00 Router Ethernet RJ- Port outs The Cisco ASR 00 Router has RJ- port for the 0/00/000 Ethernet connection. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. See xref Figure A- to see an RJ- port and connector. Cisco ASR 00 Router MGMT Ethernet Port s and outs The following table lists the RJ- port pinouts for the front panel Management Ethernet port. Table : RJ- Management Ethernet Port outs for the Cisco ASR 00 Router TX Data+ TX Data RX Data+, NC RX Data, NC Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Console Port s and outs Cisco ASR 00 Router Console Port s and outs The following table lists the pinouts of the dual RJ- ports for the front panel console port. Table : Console Port outs for Cisco ASR 00 Router RTS Request to Send (tied directly to CTS) DTR Data Terminal Ready (always On) TXD Ring Indicator RXD DSR Unused CTS Clear to Send (tied to RTS) Cisco ASR 00 Router Auxiliary Port s and outs The following table lists the pinouts of the dual RJ- ports for the auxiliary port signals. Table : Auxiliary Port outs for Cisco ASR 00 Router RTS Request to Send DTR Data Terminal Ready (always On) TXD RI Ring Indicator RXD Cisco ASR 000 Series Router Hardware Installation Guide 9
Cisco ASR 00 Router BITS Port s and outs Cisco ASR 000 Series Router Specifications DSR/DCD Data Set Ready/Data Carrier Detect CTS Clear to Send Cisco ASR 00 Router BITS Port s and outs The following table lists the pinouts of the front panel Building Integrated Timing Supply (BITS) RJ port. Table : BITS RJ- Receptacle outs for Cisco ASR 00 Router RX Ring Receive Ring RX TIP Receive TIP (T/E), TX Ring Unused TX TIP Unused, Cisco ASR 00 Router DB- out Assignments for Relays The following table lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB- connector. For more information about the DB- alarm connector, see Cisco ASR 00 Router DB- out Assignments for Relays, on page. Table : Cisco ASR 00 Router DB- Connector out Assignments Common (CM) Normally Open (NO) Normally Closed (NC) SPARE CRTAA Critical Audible MAJAA Major Audible 0 Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router, Cisco ASR 00-F Router, and Cisco ASR 00-X Router Specifications Common (CM) Normally Open (NO) Normally Closed (NC) SPARE MINAA Minor Audible CRTVA Critical Visual 9 MAJVA Major Visual 0 MINVA Minor Visual 9 SPARE SPAREunused pin reserved for future use 0,,,,,, Cisco ASR 00 Router, Cisco ASR 00-F Router, and Cisco ASR 00-X Router Specifications This section lists the specifications for the Cisco ASR 00 Router, Cisco ASR 00-F Router, and Cisco ASR 00-X Router. Note Unless stated otherwise, the specifications for the Cisco ASR 00-F Router are the same as those for the Cisco ASR 00 Router except where limited by constrained throughput of.g on the Cisco ASR 00-F Router.Similarly, most of the specifications for the Cisco ASR 00-X Router are the same as the specifications for the Cisco ASR 00 Router. The differences in specifications have been called out at the relevant places in this section. Some of the Cisco ASR 00-X Router specifications that are covered in this section are for ports that are specific to that router. The following table lists the Cisco ASR 00 Router physical specifications. Table : Cisco ASR 00 Router Specifications Midplane Specification Connects the Cisco integrated ASR000-RP, the ASR 000 ESP or ESP0, SPAs, and power supplies together in the system Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00 Router Mgmt Ethernet RJ- Port outs Cisco ASR 000 Series Router Specifications Dimensions (H x W x D) Weight Specification Height:. in. (.9 cm) Width:. in. (9-inch rack-mount or optional Telco adaptor brackets) Depth:.0 in. (including card handles, cable-management brackets, and power supply handles) for mounting in a 00mm-enclosed cabinet 0 lbs (. kg) for a fully loaded Cisco ASR 00 Router or Cisco ASR 00-F Router. lbs (9. kg) for a fully loaded Cisco ASR 00-X Router Nominal operating temperature to 0 F to 0 C Nominal operating humidity Storage temperature 0% to % to 0 F 0 to 0 C Power consumption Maximum DC: 90W Maximum AC: 0W Maximum (Out): 0W Cisco ASR 00 Router Mgmt Ethernet RJ- Port outs Note Unless stated otherwise, the specifications for the Cisco ASR 00-X Router are the same as the Cisco ASR 00 Router specifications listed in this section. The Cisco ASR 00 Router has RJ- port for the 0/00/000 Ethernet connections. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. The following table lists the RJ- port pinout for the front panel Management Ethernet port. Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Console Port s and outs Table : Management Ethernet 0/00/000 RJ- Port outs for Cisco ASR 00 Router TX Data+ TX Data RX Data+, NC RX Data, NC Cisco ASR 00 Router Console Port s and outs Note Unless stated otherwise, the specifications for the Cisco ASR 00-X Router are the same as the Cisco ASR 00 Router specifications listed in this section. The following table lists the pinout of the dual RJ- ports for the front panel console port. Table : Console Port outs for Cisco ASR 00 Router RTS Request to Send (tied to CTS) DTR Data Terminal Ready (always On) TXD Ring Indicator RXD DSR unused CTS Clear to Send (tied to RTS) Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00 Router Auxiliary Port s and outs Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Auxiliary Port s and outs Note Unless stated otherwise, the specifications for the Cisco ASR 00-X Router are the same as the Cisco ASR 00 Router specifications listed in this section. The following table lists the pinout of the dual RJ- ports for the auxiliary port signals. Table 9: Auxiliary Port outs for Cisco ASR 00 Router RTS Request to Send DTR Data Terminal Ready (always On) TXD RI Ring Indicator RXD DSR/DCD Data Set Ready/Data Carrier Detect CTS Clear to Send Cisco ASR 00 Router BITS Port s and outs The following table lists the pinout of the front panel Building Integrated Timing Supply (BITS) RJ port. Table 0: BITS RJ- Interface outs for Cisco ASR 00 Router RX Ring Receive Ring RX TIP Receive TIP (T/E), Not used TX Ring Not used TX TIP Not used Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00-X Router BITS Port s and outs, Cisco ASR 00-X Router BITS Port s and outs The following table lists the pinout of the front panel Building Integrated Timing Supply (BITS) RJ port on the Cisco ASR 00-X Router. Table : BITS RJ- Interface outs for Cisco ASR 00-X Router RX Ring Receive Ring RX TIP Receive TIP (T/E), Not used TX Ring Transmit Ring TX TIP Transmit TIP (T/E), Cisco ASR 00-X Router BNC GPS Ports The following table describes the BNC GPS ports on the Cisco ASR 00-X. Table : GPS Port out Attribute Waveform Amplitude Impedance Pulse Width 0 Mhz (input and output) Sine wave Square wave >. volt p-p(+ to +0 dbm) >. volts TTL compatible 0 ohms 0% duty cycle PPS (input and output) Pulse shape Pulse shape >. volts TTL compatible >. volts TTL compatible 0 ohms microseconds Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00-X Router Time of Day Port out Cisco ASR 000 Series Router Specifications Attribute Rise Time 0 Mhz (input and output) AC coupled nanoseconds PPS (input and output) 0 nanoseconds Cisco ASR 00-X Router Time of Day Port out The following table summarizes the pinout of the ToD/PPS port pinout on the Cisco ASR 00-X. Table : RJ PPS/ToD Port out Name PPS_P or PPS RS signal PPS_N or PPS RS signal RESERVED Do not use this pin. Time of Day character RESERVED Do not use this pin. TOD_P or Time of Day character TOD_N or Time of Day character Cisco ASR 0 Router Specifications Table : Cisco ASR 0 Router Specifications This section lists the specifications for the Cisco ASR 0 Router. The following table lists the Cisco ASR 0 Router physical specifications. Midplane Specification Connects Cisco ASR000-RP, Cisco ASR 000-ESP0 or Cisco ASR 000-ESP00, Cisco ASR000-SIP0 and Cisco ASR000-SIP0, and power supplies together in the system Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 0 Router Specifications Dimensions (H x W x D) Specification Height:. in. (9. cm) Width:. in. (. cm) Depth: in (. cm) with cable-management bracket and power supply handles included Weight.0 lb (. kg) (with redundant AC power supply, SPA and route processor and SIP blank covers, two embedded services processors, two route processors, six SIPs, and no SPAs) 90.0 pounds (loaded with DC power supplies) (. kg) Total with estimated superslot weights with: AC power supplies0 pounds (9. kg) DC power supplies 0.0 (9. kg) Nominal operating temperature Nominal operating humidity Storage temperature Note Using the Cisco ASR000-ESP00 instead of the Cisco ASR000-ESP0 adds. lbs to the total weight of the router. to 0 C 0% to % to 0 F 0 to 0 C Power consumption (x Zones) Maximum input (DC):,00W Maximum input (AC High Line):,000 W Maximum output (DC and AC High Line):,90 W Per Power Supply Power Consumption Maximum input (DC): 00W Maximum input (AC High Line):,000WMaximum input (AC Low Line):,0W Maximum output (DC and AC High Line):,9W Maximum output (AC Low Line):,W Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 0 Router Memory and Storage Options Cisco ASR 000 Series Router Specifications Cisco ASR 0 Router Memory and Storage Options The following table lists the hardware memory and storage options supported on the Cisco ASR 0 Router. Table : Memory and Storage Options for Cisco ASR 0 Router Memory Type R DRAM FECP DRAM eusb Internal Flash + NVRAM Default GB GB for ASR000-ESP- GB for ASR000-ESP0 GB on the integrated RP on the Cisco ASR 00 Router (partitioned: GB for bootflash; GB for mass storage) Maximum System Support GB GB GB Not Field Upgradeable Cisco ASR 0 Router Ethernet RJ- Port outs The Cisco ASR 0 Router has RJ- port for the 0/00/000 Ethernet connections. The RJ- port supports IEEE 0.ab (Gigabit Ethernet) and IEEE 0.u (Fast Ethernet) interfaces compliant with 0BASET, 00BASETX, and 000BASET specifications. The RJ- port supports standard straight-through and crossover Category UTP cables with RJ- connectors. Cisco does not supply Category UTP cables; these cables are available commercially. Cisco ASR 0 Router MGMT Ethernet Port s and outs The following table lists the RJ- port pinout for the front panel Management Ethernet port. Table : Management Ethernet 0/00/000 RJ- Port outs for Cisco ASR 0 Router TX Data+ TX Data RX Data+, NC RX Data, NC Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 0 Router Console Port s and outs Cisco ASR 0 Router Console Port s and outs The following table lists the pinouts of the dual RJ- ports for the front panel console port. Table : Console Port outs for Cisco ASR 0 Router RTS Request to Send (tied to CTS) DTR Data Terminal Ready (always On) TXD Ring Indicator RXD DSR unused CTS Clear to Send (tied to RTS) Cisco ASR 0 Router Auxiliary Port s and outs The following table lists the pinouts of the dual RJ- ports for the auxiliary port signals. Table : Auxiliary Port outs for Cisco ASR 0 Router RTS Request to Send DTR Data Terminal Ready (always On) TXD RI Ring Indicator RXD Cisco ASR 000 Series Router Hardware Installation Guide 9
Cisco ASR 0 Router BITS Port s and outs Cisco ASR 000 Series Router Specifications DSR/DCD Data Set Ready/Data Carrier Detect CTS Clear to Send Cisco ASR 0 Router BITS Port s and outs The following table lists the pinouts of the front panel Building Integrated Timing Supply (BITS) RJ port. Table 9: BITS RJ- Interface outs for Cisco ASR 0 Router RX Ring Receive Ring RX TIP Receive TIP (T/E), TX Ring Unused TX TIP Unused, Cisco ASR 0 Router DB- out Assignments for Relays The following table lists the common, normally open, and normally closed relay contacts accessible to an external alarm monitoring facility by means of the DB- connector. For more information about the DB- alarm connector, see xref c_cisco_asr_00_router_db-_out_assignments_for Relays_0.xml. Table 0: Cisco ASR 0 Router DB- Connector out Assignments Common (CM) Normally Open (NO) Normally Closed (NC) SPARE CRTAA Critical Audible MAJAA Major Audible 0 Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 000 Series Router Specifications Cisco ASR 00 Router Specifications Common (CM) Normally Open (NO) Normally Closed (NC) SPARE MINAA Minor Audible CRTVA Critical Visual 9 MAJVA Major Visual 0 MINVA Minor Visual 9 SPARE SPAREunused pin reserved for future use 0,,,,,, Cisco ASR 00 Router Specifications This section lists the specifications for the Cisco ASR 00 Router. The following table lists the Cisco ASR 00 Router physical specifications. Note The Cisco ASR 00 Router has the route processor, embedded services processor, and SIP integrated in the chassis. Table : Cisco ASR 00 Router Specifications Dimensions (H x W x D) Weight Specification Height:. in. (. mm) Width:. in. (9. mm) Depth:.0 in. (. mm) including card handles, cable-management brackets, and power supply handles).0 lb (0. kg) (with dual AC power and integrated daughter card).0 lb (0. kg) (with dual DC power and integrated daughter card) lb fully loaded Cisco ASR 000 Series Router Hardware Installation Guide
Cisco ASR 00 Router Memory and Storage Options Cisco ASR 000 Series Router Specifications Operating temperature Nominal operating humidity Storage temperature Specification Nominal to 0 C 0% to 90% non-condensing to 0 F 0 to 0 C Power consumption Maximum (DC): 00 W Maximum (AC): W Maximum (Out): 00 W Cisco ASR 00 Router Memory and Storage Options The following table lists the hardware memory and storage options supported on the Cisco ASR 00 Router. Table : Memory and Storage Options for Cisco ASR 00 Router Memory Type ESP Route Processor External USB flash memory Default GB DRAM default Cisco ASR 00 Route Processor comes with GB DRAM (default) Cisco ASR 00 offers GB Embedded USB memory (EUSB) support (partitioned: two -MB for nonvolatile RAM [NVRAM] and the rest for mass storage) GB USB flash memory support Maximum System Support GB DRAM maximum GB DRAM maximum Cisco ASR 000 Series Router Hardware Installation Guide