eelecta & new products Home and Building Evolution Eelectron - Via Magenta 77/22, I-20017 Rho (MI), Italy Eric Ducros eric.ducros@eelectron.com +39 02.9316681 www.eelectron.com info@eelectron.com www.eelectron.com 1 Home and Building Evolution 24/05/12
Company profile Eelectron is an Italian company, focused since 1995 in design, development and production of electronic devices and software. Eelectron provides complete systems for : Hotel management, local and remote supervision: Synchronicity Residential and building automation: Eelecta General purpose: actuators, accessories, line complements, system components Home and Building Evolution www.eelectron.com 24/05/12 2
You, in an homy and environmental world Home and Building Evolution 24/05/12 www.eelectron.com 3
Eelecta Homepad - KNX push buttons DIMENSIONS www.eelectron.com Home and Building Evolution 24/05/12 4
Eelecta Homepad - KNX push buttons CODE DESCRIPTION BUTTONS INPUT TEMP. PROBE PB40BxxKNX 4 channels KNX switch 4 NO NO PB40CxxKNX 4 channels KNX switch 4 4 YES PB80AxxKNX 8 channels KNX switch 8 NO YES PB80BxxKNX 8 channels KNX switch 8 4 NO www.eelectron.com Home and Building Evolution 24/05/12 5
Eelecta Homepad - KNX push buttons Switch and led position 4 push-buttons 8 push-buttons www.eelectron.com Home and Building Evolution 24/05/12 6
Eelecta Homepad - KNX push buttons Input position for PB40CxxKNX and PB80BxxKNX Inputs: 1: Input N 4 2: Common 3: Input N 3 4: Common 5: Common 6: Input N 2 7: Common 8: Input N 1 Inputs: FOR DRY CONTACTS 10 m. MAX LENGHT www.eelectron.com Home and Building Evolution 24/05/12 7
Eelecta Homepad - KNX push buttons WALL MOUNTING IN 2 / 3 MODULE BOXES www.eelectron.com Home and Building Evolution 24/05/12 8
Eelecta Homepad - KNX push buttons WALL MOUNTING IN 2 / 3 MODULE BOXES www.eelectron.com Home and Building Evolution 24/05/12 9
Eelecta Homepad - KNX push buttons WALL MOUNTING IN 2 / 3 MODULE BOXES www.eelectron.com Home and Building Evolution 24/05/12 10
Eelecta Homepad - KNX push buttons MAIN FUNCTIONS PUSH BUTTONS INPUTS LEDS 1 bit commands 1 Byte commands Short and long press Sequence of commands (3 mixed 1 bit / 1 byte) Scene Dimmer management Shutter management 1 bit commands 1 Byte commands Short and long press Edge detection Cyclic sending Sequence of commands (3 mixed 1 bit / 1 byte) Scene Dimmer management Shutter management 5 LEDs All freely configurable ON / OFF / BLINK +PWM for LED 5 www.eelectron.com Home and Building Evolution 24/05/12 11
Eelecta Homepad - KNX push buttons from the bus MAIN FUNCTIONS THERMOSTAT to the bus 2 POINTS ON/OFF 2 POINTS ON/OFF (PWM) FAN COIL ON/OFF +1/2/3 SPEED FAN COIL % SPEED HEAT / COOL HVAC MODE COMFORT WINDOW CONTACT THERMOSTAT Control algorithm TEMPERATURE INFO SETPOINT INFO ON / OFF Heating ON / OFF Cooling Fan speed 1 HEATING / COOLING SETPOINT Fan speed 2 Fan speed control % DELTA SETPOINT Fan speed 3 www.eelectron.com Home and Building Evolution 24/05/12 12
Eelecta Homepad conventional push buttons CODE: PB40AxxCON NOT A KNX DEVICE NO POWER SUPPLY NEEDED NO LEDS 4 BUTTONS TERMINALS TO BE CONNECTED TO KNX INPUTS (DRY CONTACTS ONLY) MAX RATING 50 ma / 12 V dc www.eelectron.com Home and Building Evolution 24/05/12 13
EELECTA KNX TOUCH PANEL DIMENSIONS www.eelectron.com Home and Building Evolution 24/05/12 14
EELECTA KNX TOUCH PANEL MAIN HARDWARE CHARACTERISTICS 3,5" TFT COLOR DISPLAY ¼ VGA (256K colors) TOUCH SCREEN FRONTAL LED BUZZER 200MHz 32-Bit ARM Processor KNX / EIB AUX POWER SUPPLY : 9 32 V dc MINI USB PORT SUPERCAP FOR 1 DAY BACKUP TIME & DATE OS: LINUX www.eelectron.com Home and Building Evolution 24/05/12 15
EELECTA KNX TOUCH PANEL MAIN SOFTWARE CHARACTERISTICS 1 ETS-programmable (no external SW required) 5 display pages, each with up to 8 control elements 6 th page (8 control elements) for alarms For each control element up to 4 KNX objects used Wide range of Control elements: pushbuttons / switches slider controller, increment / decrement push button for value settings ( set points etc. ) Dimming, RGB lighting shutter/blinds management HVAC mode control timer, etc. Each page or control element can be protected by Pw Font, backlights, Navigation layout are customizable www.eelectron.com Home and Building Evolution 24/05/12 16
EELECTA KNX TOUCH PANEL MAIN SOFTWARE CHARACTERISTICS SYSTEM KNX / EIB OBJECTS System Time & Date (send and/or receive) Standby with KNX / EIB Object www.eelectron.com Home and Building Evolution 24/05/12 17
EELECTA KNX TOUCH PANEL MAIN SOFTWARE CHARACTERISTICS 3 SPECIAL FUNCTIONS: TIMERS Each control element can be a timer (up to 40) with: Direct control of commands Enable / Disable local and by CO Weekly programming with 6 event per day up to 7 days www.eelectron.com Home and Building Evolution 24/05/12 18
EELECTA KNX TOUCH PANEL MAIN SOFTWARE CHARACTERISTICS 4 SPECIAL FUNCTIONS: CUSTOMIZED LOGIC 31 objects reserved for logic function: 10 1-bit objects 8 1-byte objects 8 2-byte objects 5 4-byte objects Logic is implemented through a file in a pseudo-programming language Many files can be pre-loaded in the SW, only one a time can be recalled (by ETS) Actually implemented: LOAD CONTROL www.eelectron.com Home and Building Evolution 24/05/12 19
EELECTA KNX TOUCH PANEL Logic example: LOAD CONTROL Wiring diagram www.eelectron.com Home and Building Evolution 20
EELECTA KNX TOUCH PANEL MAIN SOFTWARE CHARACTERISTICS SPECIAL FUNCTIONS: THERMOSTAT Different operation mode Different Algorithms www.eelectron.com Home and Building Evolution 24/05/12 21
EELECTA KNX TOUCH PANEL MAIN SOFTWARE CHARACTERISTICS UPCOMING FUNCTIONS: Data logging + graphics Data storage in a micro SD Card Line charts based on logged data Zoom and multiple lines fonction www.eelectron.com Home and Building Evolution 24/05/12 22
IO88E01KNX DIN RAIL MODULE 8 IN / 8 OUT DIN rail mounting (4 modules) 8 inputs (for free potential contacts) ON / OFF / Toggle functions Short or long press operation Dimming function Roller shutter and blind management Scene 8 outputs (8 NO 16 A) configurable for: ----------------------- SWITCHING (8 loads) NO / NC behaviour setting ON / OFF function delay on activation / deactivation / timing / pump / flashing Lock function Logic function for each output (AND / OR / XOR) Scene function Feedback status object Home and Building Evolution www.eelectron.com 24/05/12 23
IO88E01KNX DIN RAIL MODULE 8 IN / 8 OUT ----------------------- SHUTTER Roller shutter and blind management Direct positioning (%) Lock function Wind / rain alarm function Scene function Feedback status object and percentage ----------------------- ELECTRIC VALVES ON / OFF or Continuous control with selectable PWM time Lock function ----------------------- MOTOR REDUCTION DRIVER ON / OFF or Continuous control Lock function Direct positioning (%) Feedback status object and percentage ----------------------- FAN COIL ACTUATOR Heating/Cooling control with relay 1 2 (logic interlocking) 3 speed control with relay 3 5 (with logic interlocking) Home and Building Evolution www.eelectron.com 24/05/12 24
Other infos: Ets Applications, Manuals, software demo, catalogues: www.eelectron.com www.eelectron.com Home and Building Evolution 24/05/12 25