Installation Guide
OPYRIGHT SDL TRADOS 2007 SUITE INSTALLATION GUIDE opyright 2008, SDL plc. All rights reserved. No part of this documentation may be duplicated in whole or in part or reproduced or transmitted in any form or by any means without the express written permission of SDL plc. SDL Trados Synergy, SDL Trados 2007, SDL MultiTerm, SDL Passolo and SDL PerfectMatch are trademarks of SDL plc. All third-party trademarks are the property of their respective owners. The names of other companies and products mentioned herein may be the trademarks of their respective owners. Unless stated to the contrary, no association with any other company or product is intended or should be inferred. Although SDL takes all reasonable measures to provide accurate and comprehensive information about the product, this guide is provided as is without warranty, either express or implied. This guide ships with SDL Trados 2007 Suite. October 2008 SDL TRADOS 2007 INSTALLATION GUIDE
TABLE OF ONTENTS hapter 1 Installation Overview About this Guide.................................................. 1-2 Introducing SDL Trados 2007 Suite................................... 1-2 System Architecture....................................... 1-3 The lient Layer.......................................... 1-3 The Middleware Server Layer................................ 1-4 The Database Server Layer.................................. 1-4 Language Support........................................ 1-4 Overview of Installing SDL Trados Products............................ 1-5 Installation Media................................................. 1-6 Upgrade and ompatibility Information................................ 1-6 Upgrading from SDL Trados 2006 and SDL Trados 7.x........... 1-6 Translation Memory ompatibility........................... 1-6 Installing Different Versions of SDL Trados on the Same omputer 1-7 TRADOS Edition 2.x, 3.x, 5.x................................. 1-8 Migrating from a Dongle to a License File..................... 1-8 MultiTerm ompatibility................................... 1-8 Registering the Software................................... 1-8 hapter 2 Licensing SDL Trados 2007 Licensing SDL Trados 2007 Products.................................. 2-2 Product Activation ode The Default Licensing Method........ 2-2 Floating Softkey License File................................ 2-4 Node Locked Softkey License File............................ 2-4 Downloading SDL Trados 2007 License Files and Product Activation odes.. 2-5 About Activating SDL Trados 2007 Products............................ 2-9 The Product Activation Wizard.............................. 2-9 SDL License Manager...................................... 2-12 SDL TRADOS 2007 INSTALLATION GUIDE 1
Activating your Product using the SDL Product Activation Wizard........... 2-13 Activating your Product using SDL License Manager..................... 2-18 Activating your Product Online.............................. 2-18 Activating your Product using Floating Licenses................ 2-21 Activating your Product using a Personal Softkey License File..... 2-24 Managing Licenses for Products Activated Online....................... 2-26 Viewing Licenses......................................... 2-26 Returning a License or Licensing your Product on a Different omputer............................................... 2-28 Repairing a License....................................... 2-29 Managing Floating License Files...................................... 2-30 Borrowing a Floating License............................... 2-30 Returning a Borrowed License Early.......................... 2-32 hanging your Floating License Server........................ 2-33 Demo Mode...................................................... 2-36 hapter 3 Installing SDL Trados 2007 Suite Professional Overview......................................................... 3-2 System Requirements.............................................. 3-2 Hardware............................................... 3-2 Platforms............................................... 3-2 ompanion Software Required by SDL Trados 2007 Suite - Professional............................................. 3-3 Language Support........................................ 3-3 Upgrading from an Earlier Version of SDL Trados............... 3-3 About the SDL Trados 2007 Suite Professional Installer................... 3-4 SDL Trados 2007 Suite - Professional omponents............. 3-4 Other Software Installed with SDL Trados 2007 Suite............ 3-5 Installation Location....................................... 3-6 Installing SDL Trados 2007 Suite -Professional.......................... 3-7 Installing SDL Trados 2007 Suite - Professional................ 3-7 Licensing................................................ 3-26 Other Installation Options.......................................... 3-27 Administrative Installation.................................. 3-27 Logging an Installation.................................... 3-28 Silent Installation......................................... 3-28 2 SDL TRADOS 2007 INSTALLATION GUIDE
Maintaining your Installation........................................ 3-29 Modifying your Installation................................. 3-29 Repairing your Installation.................................. 3-31 Removing SDL Trados 2007 Applications...................... 3-31 Access Restrictions........................................ 3-32 Technical Support......................................... 3-33 What s Next?..................................................... 3-33 hapter 4 Installing SDL Trados 2007 Suite Freelance Overview......................................................... 4-2 Hardware............................................... 4-2 Platforms................................................ 4-2 ompanion Software Required by SDL Trados 2007 Suite - Freelance................................................ 4-2 Language Support........................................ 4-3 Upgrading from an Earlier Version of SDL Trados............... 4-3 SDL Trados 2007 Suite - Freelance Product Restrictions.......... 4-4 About the SDL Trados 2007 Suite - Freelance Installer.................... 4-5 SDL Trados 2007 Suite Suite - Freelance omponents........... 4-5 Other Software Installed with SDL Trados 2007 Suite............ 4-6 Installation Location....................................... 4-7 Installing SDL Trados 2007 Suite - Freelance............................ 4-8 Maintaining your SDL Trados 2007 Suite Freelance Installation............ 4-29 Modifying your Installation................................. 4-29 Repairing your Installation.................................. 4-31 Removing SDL Trados 2007 Freelance........................ 4-31 Access Restrictions........................................ 4-32 Technical Support......................................... 4-32 What s Next?..................................................... 4-32 SDL TRADOS 2007 INSTALLATION GUIDE 3
4 SDL TRADOS 2007 INSTALLATION GUIDE
INSTALLATION OVERVIEW This chapter gives you an overview of the SDL Trados 2007 Suite installation procedure and an overview of the SDL Trados 2007 Suite system. Sections include: About this Guide Introducing SDL Trados 2007 Suite Overview of Installing SDL Trados Products Installation Media Upgrade and ompatibility Information hapter 1
1 About this Guide ABOUT THIS GUIDE This guide describes how to install and license: SDL Trados 2007 Suite - Professional SDL Trados 2007 Suite - Freelance Using SDL Trados 2007 Suite tools is described in the product help and documentation. SDL Trados guides and tutorials are placed in the following location during product installation: :\Program Files\SDL International\SDL Trados 2007[_FL}\Documentation :\Program Files\SDL International\SDL Trados 2007[_FL}\Tutorials :\Program Files\SDL Passolo 2007\Manuals INTRODUING SDL TRADOS 2007 SUITE SDL Trados 2007 Suite is a suite of products that work together to enable translation teams to share translation tools, resources and project files. Resources such as translation memories and project tracking tools can be shared over an intranet or over the Internet. SDL Trados 2007 Suite contains the following two products: SDL Trados 2007 SDL Passolo Essential including all main functions needed for the localization of software This guide mainly contains information on SDL Trados 2007. For more information on SDL Passolo Essential and its restrictions compared to the Professional and Team Editions, refer to the SDL Passolo Getting Started Guide and SDL Passolo Handbook included with SDL Passolo Essential. You can access this documentation from the Start view in SDL Trados Synergy or through the Windows Start menu under All Programs > SDL Passolo > Manuals. SDL Trados 2007 Suite can also be a single-user tool where the SDL Trados 2007 Suite software and translation memories are located on your computer and there is no interaction with translation memories or projects over an intranet or the Internet. 1-2 SDL TRADOS 2007 INSTALLATION GUIDE
Introducing SDL Trados 2007 Suite 1 System Architecture In a multi-user setup SDL Trados 2007 Suite has a three layer architecture as this diagram shows. In a single-user setup all resources are located on the user s computer. The lient Layer lients include: Synergy, Translator s Workbench, TagEditor, SDL Passolo and Server Manager. Synergy, Translator s Workbench, TagEditor and SDL Passolo Essential are packaged together as SDL Trados 2007 Suite Professional and SDL Trados 2007 Suite Freelance. SDL Trados Server Manager is the client used by system administrators to manage serverbased-translation memories and user access rights to translation memories. Synergy is the SDL Trados 2007 Suite project management tool where projects are created and distributed and project team members open and translate project packages. Translator s Workbench is where translation memory administration is performed. TagEditor is where tagged files are translated. The special editing environment ensures that information in tags is not lost during translation. SDL TRADOS 2007 INSTALLATION GUIDE 1-3
1 Introducing SDL Trados 2007 Suite SDL Passolo Essential is a localization tool for text resource translation and software localization. Text resources are the text components of a software that are displayed on the screen. SDL Trados Server Manager is the administration client for server-side components of SDL Trados 2007 Suite. In a setup that includes server components, clients communicate with SDL Trados 2007 Suite Server components through the intranet (through a LAN or WAN) or through the Internet using TM Anywhere Server. lients communicate with database servers through middleware components. D NOTE SDL Trados Server Manager communicates with SDL Trados 2007 Suite Server through the intranet only. The Middleware Server Layer ontains the servers that enable SDL Trados 2007 Suite users to access server-based translation memories and project tracking on the project tracking server. This layer also handles all communication with the databases holding translation memories. The Database Server Layer The database server layer is the data storage layer for SDL Trados 2007 Suite. It contains the databases where translation memories and user credentials are stored. One or more database servers can be used. lients cannot access databases directly, all access is through servers in the Middleware layer. Language Support In general, language support in the SDL Trados translation memory suite corresponds to the language support installed on your system. For more information about specific support for bi-directional and double-byte character set (DBS) languages in Translator s Workbench, and TagEditor, see the relevant online help system and the product release notes. Additional information is available from the SDL online support center at http://support.sdl.com. 1-4 SDL TRADOS 2007 INSTALLATION GUIDE
Overview of Installing SDL Trados Products 1 OVERVIEW OF INSTALLING SDL TRADOS PRODUTS The installation programs for both SDL Trados Freelance and Professional follow the same pattern: Step 1 Step 2 Step 3 Step 4 Step 5 On the machine where SDL Trados is being installed, the installer program checks for the presence of prerequisite software. This is software that must be in place for SDL Trados to function correctly. For example, SDL Trados requires the.net Framework 2 to be present. If pre-requisite software is not found on your machine, it is installed with SDL Trados. You are presented with a list of the items that will be installed. The list may include missing software prerequisites as well as SDL Trados software. At this point it is possible to remove items from the list. However, this is not recommended as SDL Trados will not function correctly if you do this. The listed software items are installed. Prerequisite software is installed before SDL Trados. Each item of prerequisite software may have its own installation screens and licensing agreement which are displayed in the SDL Trados 2007 Suite installer. You can choose to perform a default or custom installation of the SDL Trados 2007 Suite software. In a custom installation you can choose not to install all SDL Trados 2007 Suite components, or to install SDL Trados 2007 Suite to a non-default location. SDL Trados components are installed. At the end of the installation process you have the opportunity to activate the SDL Trados 2007 Suite product by licensing the software for the machine where it has been installed. See About Activating SDL Trados 2007 Products on page 2-9 for more information. If you are using the software in trial mode, you have thirty days in which you can use it without purchasing a valid license. After 30 days, if you have not purchased a valid license the software will either cease to function or will function in a severely limited form known as demo mode. For more information about product licensing, see hapter 2 Licensing SDL Trados 2007. SDL TRADOS 2007 INSTALLATION GUIDE 1-5
1 Installation Media INSTALLATION MEDIA When you purchase SDL software you can either order a product D or download the software from the Internet. If you purchased a D, install SDL Trados 2007 Suite directly from the product D. If you are installing the software from a network resource, ask your system administrator for the network location of the SDL Trados 2007 Suite installer setup program. If you downloaded the software, go to the location where you stored the downloaded files and run the installer from there. UPGRADE AND OMPATIBILITY INFORMATION This section contains important information if you are upgrading from an earlier version of the software. It also discusses how different versions can co-exist during the transition period of upgrading. We strongly recommend that you finish translating files that were initially processed in earlier versions before upgrading to SDL Trados 2007 Suite. Upgrading from SDL Trados 2006 and SDL Trados 7.x SDL Trados 2007 Suite supports side-by-side installation with SDL Trados 2006 and 7.x. However, SDLX 2007 cannot be installed side-by-side with SDLX 2006. Running the SDL Trados 2007 installer upgrades SDLX 2006 to SDLX 2007. Translation Memory ompatibility Translation memories created in SDL Trados 2007 Suite have the database version number 7.x. Translation memories created in TRADOS 7.x and earlier can be opened by and used in version 8.x of Translator's Workbench. However, in order to benefit from the Unicode-related enhancements, it is necessary to export the 6.5 or earlier translation memories in version 6.x or earlier and then import them into newly created translation memories. 1-6 SDL TRADOS 2007 INSTALLATION GUIDE
Upgrade and ompatibility Information 1 Translation memories created in versions 7.x/8.x of Translator s Workbench cannot be opened in earlier versions of Translator's Workbench (version 6.5 and earlier). This is due to the support for new languages and the ability to store Unicode content in any language in translation memory metadata fields, such as text and attribute fields. However, translation memories can be exchanged between version 7.x and 8.x of Translator s Workbench without any problems, as translation memories in these versions share the same database format. This applies to both file and serverbased translation memories. Importing 7.x/8.x-produced export files into a 6.x installation may result in corrupt TM data (fields, as well as segments), if Unicode characters are present in the 7.x/8.x TM that is exported into 6.x format. By default, export files of Translator s Workbench translation memories are now encoded in Unicode (UTF-8) in order to support the new languages and other Unicode content in translation memories. These export files can only be imported into version 7.x/8.x translation memories and cannot be exchanged with users of older versions. A backward-compatible export format is still available for use with older versions; however this file format does not support any of the new Unicode-related enhancements. Installing Different Versions of SDL Trados on the Same omputer During the upgrade period, you may want to have different versions of the SDL Trados translation solution co-exist on your computer. In this situation, we recommend the following: In general, you can install SDL Trados 2007 Suite on the same computer as the previous versions (version 7.5 or earlier), provided that each version is installed to a separate folder. The default installation location for each version of the software is different. Do not use different versions of the software at the same time. For example, close Translator's Workbench 7.x before registering and opening Translator's Workbench 8.x. Do not run different versions of the same component at the same time. If you are using several tools at once, do not work with mixed versions of the software. For example, if you are translating files in TagEditor, use TagEditor 8.x with Translator's Workbench 8.x. Do not use TagEditor 8.x with Translator's Workbench 7.5 and vice versa. We recommend that you use the same version of the software to translate files from start to finish. Migrating files from an earlier to a later version of the software when the project has already started may result in data inconsistencies. When alternating between two different versions, you must register the software you are about to use by executing a special self-registration batch file. The batch file for each version is accessed from the Start menu on your computer. SDL TRADOS 2007 INSTALLATION GUIDE 1-7
1 Upgrade and ompatibility Information TRADOS Edition 2.x, 3.x, 5.x Limited compatibility may apply between SDL Trados 2007 Suite and editions 2.x/3.x/5.x of the TRADOS translation solution. Limited compatibility between translation memories created in Edition 2.x/3.x and Translator s Workbench 5.x and 6.x may also apply. ontact SDL before migrating Edition 2.x/3.x/5.x memories to Translator s Workbench 7.x/8.x. Migrating from a Dongle to a License File If you are upgrading from an earlier version of Trados software which used a dongle you cannot use your old dongle with the later version of the software. Please contact customer support for additional information on upgrading your license. MultiTerm ompatibility SDL Trados 2007 Suite is compatible with the following SDL MultiTerm versions: MultiTerm 2007 (version 7.5) and previous 7.x releases, MultiTerm ix (version 6.x) and MultiTerm 5.5. SDLX 2007 is compatible with SDL MultiTerm 2007 and 7.x only. To avail of the new terminology features such as active terminology recognition across several terminology databases and quick term entry from Translator's Workbench and TagEditor, you must use MultiTerm 2007 or 7.x Desktop. For optimum performance, we recommend using MultiTerm 2007 (version 7.5) in conjunction with SDL Trados 2007 Suite. Registering the Software When alternating between two different versions, you must register the software you are about to use by executing a special self-registration batch file. The batch file for each version is accessed from the Start menu on your computer after installation. To register version 8.x of the software, go to the Start menu on your computer and point to the program folder for SDL Trados 2007 Suite. In the program folder, select Register SDL Trados 2007 to execute the batch file for the version 8.x software. Once the you have run the batch file successfully, the software is ready for use. D NOTE If you install SDL Trados 2007 Suite on Windows Vista with an Administrator Account but UA (User Account ontrol) activated, the SelfRegister.bat does not work by default due to increased security on Windows Vista. To run the registration bat files, you must Right-click the batch file and select Run as administrator. You will be asked for your permission to run the script with elevated permissions. 1-8 SDL TRADOS 2007 INSTALLATION GUIDE
LIENSING SDL TRADOS 2007 This chapter describes how SDL Trados 2007 licenses are managed. Topics include: Licensing SDL Trados 2007 Products Downloading SDL Trados 2007 License Files and Product Activation odes About Activating SDL Trados 2007 Products Managing Licenses for Products Activated Online Managing Floating License Files Demo Mode hapter 2
2 Licensing SDL Trados 2007 Products LIENSING SDL TRADOS 2007 PRODUTS When you purchase and download your SDL Trados 2007 software from the Internet, you download your product license at the same time. SDL Trados 2007 products use the following license types: Product Activation ode Softkey license file - Floating Softkey license file - Node Locked. Each type is described in detail below. Product Activation ode The Default Licensing Method This type of license is used for SDL Trados 2007 Freelance and SDL Trados 2007 Professional. The license takes the form of an activation code downloaded from the SDL licensing website when you purchase the software. Once the software is installed on your computer you must activate the product by licensing the product on that computer. You do this by connecting to the SDL licensing website from the computer and activating the product using the code. This is referred to as online activation. You connect to the SDL licensing website using the SDL Product Activation wizard. The wizard is displayed automatically at the end of product installation. Until you have activated the product online, the wizard will also appear every time you start the software. Once you have activated the product online, the license is valid for the machine from which you performed the activation and no further action is required. If you have to move the software to a different computer you must return the license and then activate the product online from the new computer, using the same activation code. Licenses are returned using SDL License Manager. D NOTE Floating licenses can also be used with SDL Trados 2007 Professional. SDL Trados Freelance users can use the same activation code to activate the same product on two computers as long as the computers are not on the same network. 2-2 SDL TRADOS 2007 INSTALLATION GUIDE
Licensing SDL Trados 2007 Products 2 SDL License Manager SDL License Manager is installed on your computer as part of SDL Trados 2007. You use the SDL License Manager to: D View your current licenses. Return a license (because you are moving the software to a different machine). onnect to the SDL licensing website and activate a product online. NOTE If you cannot return a license because the machine where you activated the product has crashed and cannot be restarted, you must contact product support. 30 Day Trial Users By special arrangement you can download the software without purchasing a license and use the software free of charge for 30 days. After 30 days, if you have not purchased a valid license and activated the product online, the software will either cease to function or it will switch to demo mode. To find out more about demo mode restrictions, go to page 2-36. Each time you open the product the SDL Product Activation wizard is displayed. When you decide to purchase a license, you can do it from here. Group Activation ode for SDL Trados 2007 Professional Users Your organization may have a single online activation code to be used by all users. Each user who installs the software activates the product online using the same activation code. The number of times the code can be used is limited to the number of licenses that were purchased. D NOTE Shared activation codes behave in exactly the same way as individual codes. For example, the code may be returned from one computer and then activated on a different computer. SDL TRADOS 2007 INSTALLATION GUIDE 2-3
2 Licensing SDL Trados 2007 Products Floating Softkey License File In this scenario the number of licenses purchased is smaller than the number of users who have installed the software. When a user opens the software, they are automatically allocated one of the available licenses. When they close the software, the license they were using is immediately made available to other users. Floating licenses are managed by FLEXlm License Server. It automatically allocates the correct license to a user when they open the SDL Trados 2007 software and takes the license back again when the user closes the application. Users connect to the License Server through the local network. Floating licenses are issued as a single (*.lic) license file which is stored on the server computer where FLEXlm License Server is installed. Users have to set up their personal computer to access the server where the floating licenses are being managed. They do this using SDL License Manager. See Managing Floating License Files on page 30. for more information. SDL Trados 2007 server tools use floating licenses. D NOTE If you open an application and no floating license is available, the application will operate in demo mode. To find out more about demo mode restrictions, go to page 2-36. Node Locked Softkey License File A node locked softkey license takes the form of a license (*.lic) file and licenses the use of one SDL Trados 2007 application on one computer. In special circumstances, by prior agreement with SDL, a node locked softkey license may also be given to a user instead of an online activation code. For server applications, node locked softkey license files are downloaded from the SDL licensing website and placed on the server computer where FLEXlm License Server is to be installed (or is already installed). Server application licenses are managed by FLEXlm License Server. FLEXlm License Server is managed and maintained by your administrator. 2-4 SDL TRADOS 2007 INSTALLATION GUIDE
Downloading SDL Trados 2007 License Files and Product Activation odes 2 DOWNLOADING SDL TRADOS 2007 LIENSE FILES AND PRODUT ATIVATION ODES SDL Trados 2007 product activation codes and license files are generated in and downloaded from the My Licenses page at the following address: http://oos.sdl.com/myaccount. This is the web address of SDL s ustomer enter. D Product activation codes are copied to the clipboard of your computer and then used to activate your product. Personal license files (*.lic) are downloaded to your computer where they are managed using SDL License Manager. License files for server tools and floating licenses are downloaded to the computer where FLEXlm License Server is to be installed. We recommend that you download the license before installing FLEXlm as you will be asked for the license file location during the FLEXlm installation process. NOTE If you do not have the license file when you install FLEXlm License Server, you can install FLEXlm and add the license location later. However, this is a more involved process that requires you to stop and restart the FLEXlm License Server service. When you purchase SDL Trados 2007 software, you are sent an email listing the items that you have purchased. This email also contains the URL for the SDL product licensing website. Your login details for the licensing website are sent to you in a separate email when your account is created on the licensing website. When you later purchase additional licenses or an upgrade, the email confirming your purchase will not contain the URL. SDL TRADOS 2007 INSTALLATION GUIDE 2-5
2 Downloading SDL Trados 2007 License Files and Product Activation odes Downloading an SDL Trados 2007 License File 1 lick the URL in the email you received from SDL, or enter the licensing website URL http://oos.sdl.com/myaccount into your browser. The website opens on the Login page. 2 Enter your user name and password and click Login. If you have more than one account the Account Selection page is displayed. lick a Use this account button to display the Account Summary page for the selected account. If you have a single account, the Account Summary page is displayed. lick to go to the My Licenses page 2-6 SDL TRADOS 2007 INSTALLATION GUIDE
Downloading SDL Trados 2007 License Files and Product Activation odes 2 3 lick the My License link to display the My Licenses page. These are product activation codes. Select (highglight) the code you require and right-click and opt to copy it to the clipboard of your computer. You can paste it directly from the clipboard into the SDL Product Activation wizard. This license is available to be generated and downloaded This license has been generated and downloaded. The Download license file link remains active in case you need to download the license to the same machine again. To download the license to a different machine you would have to return the license, regenerate the license for the new machine and then download the regenerated license. 4 Locate the product for which you want to generate the license. 5 lick the Generate License File link to display the Generate License File page. This is where you generate the license file and download it to your computer or to the server where FLEXlm will be installed. Make a note of where you place the license file. SDL TRADOS 2007 INSTALLATION GUIDE 2-7
2 Downloading SDL Trados 2007 License Files and Product Activation odes 6 Repeat step 3 for any other licenses that are ready for downloading. D NOTE Directions on how to generate and download license files are available on the licensing website. Once you have successfully generated and saved your license file, you can activate your product. See About Activating SDL Trados 2007 Products on page 9.. Downloading a Product Activation ode 1 lick the URL in the email you received from SDL, or enter the licensing website URL http://oos.sdl.com/myaccount into your browser. The website opens on the Login page. 2 Enter your user name and password and click Login. If you have more than one account the Account Selection page is displayed. lick a Use this account button to display the Account Summary page for the selected account 3 lick the My License link to display the My Licenses page. 4 Under the section headed, My Product Activation odes, locate the code to be downloaded. 5 Select the code and right-click. 6 Select opy. The selected code is copied to your computer s clipboard. 2-8 SDL TRADOS 2007 INSTALLATION GUIDE
About Activating SDL Trados 2007 Products 2 ABOUT ATIVATING SDL TRADOS 2007 PRODUTS When you install an SDL Trados 2007 product, the product is not valid for use until it has been activated. Activation means that the product has been licensed for use on the machine where it is installed. The type of activation you perform is determined by the type of license you purchased: If you have an activation code, you perform online activation. If you are using floating licenses, you activate your product by setting up your computer to connect to the server computer where floating licenses are stored. If you have a personal node locked softkey license, you activate your product by linking the software to the downloaded license file. Both the SDL Product Activation wizard and the SDL License Manager can be used to perform all three types of activation. The Product Activation Wizard The SDL Product Activation wizard is displayed automatically when you are installing the SDL Trados 2007 product. It is also displayed automatically whenever you open a product that has not been activated. This is the opening page of the SDL Product Activation wizard: SDL TRADOS 2007 INSTALLATION GUIDE 2-9
2 About Activating SDL Trados 2007 Products The SDL Product Activation wizard contains options to perform the following actions: Activate the product online. Activate the product by setting up access to the server where floating licenses are being managed. Activate the product by linking it to a (*.lic) file located on your personal computer. onnect to the SDL website and purchase a valid license or to continue using the software in trial mode. This option is for users who have been using the software in trial mode. hoose the required option and click Next to continue. There are two other versions of this opening page. They are specific to users working in trial mode. This version of the opening page is displayed when the 30 day trial period has expired and the product is running in demo mode: To continue running the product in demo mode, select ontinue in demo mode. To find out more about demo mode restrictions, go to page 2-36. 2-10 SDL TRADOS 2007 INSTALLATION GUIDE
About Activating SDL Trados 2007 Products 2 This version of the opening page is displayed when the 30 day trial has expired and there is no demo mode available for the product: SDL TRADOS 2007 INSTALLATION GUIDE 2-11
2 About Activating SDL Trados 2007 Products SDL License Manager SDL License Manager is installed with SDL Trados 2007 and is always available. These tools are used to access floating licenses stored on a server computer or to manage license files on your personal computer These tools are used for online activation and management of licenses activated online SDL License Manager contains options for: Activating licenses online. Viewing licenses that were activated online. Returning licenses that were activated online. Setting up your software to use floating licenses. Setting up your software to use a node locked softkey license file. To display SDL License Manager, go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License Manager. 2-12 SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using the SDL Product Activation Wizard 2 ATIVATING YOUR PRODUT USING THE SDL PRODUT ATIVATION WIZARD Depending on the type of activation you are about to perform, you will need: the product activation code, or the name and port number of the server where floating licenses are managed, or the location of your node locked softkey license file. To activate your product using the SDL Product Activation Wizard: The SDL Product Activation wizard is displayed: Automatically at the end of installing the software. Automatically every time you start software that has not yet been activated. 1 The wizard opens at the Product Activation page. D NOTE If you are using SDL Trados 2007 software on a 30 day trial, the opening page may have different options. However, all versions have the Show me how to activate the product option. SDL TRADOS 2007 INSTALLATION GUIDE 2-13
2 Activating your Product using the SDL Product Activation Wizard 2 Select I have purchased a license. Show me how to activate the product. and click Next. The Select Activation Method page is displayed. 3 hoose an activation method: If you will be using floating licenses, select onnect to a local license server, click Next and go to step 4. If you have a personal node locked softkey (*.lic) license file, select Use a local license file, click Next and go to step 5. If you have a product activation code, select Activate your product online, click Next and go to step 6. 2-14 SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using the SDL Product Activation Wizard 2 4 This version of the Product Activation page is displayed if you selected onnect to a local license server: Overtype the entry in the Select license server box with the name and port number of the server used to manage floating licenses. The entry should take the form: port_number@server_name with no spaces. lick Next. The server details are authenticated. If the server details are correct, activation is complete. lick Finish to exit the wizard. If activation fails, click Back to return to the previous page. heck that the server name and port number are correct and that you have entered them in the correct format. lick Next. 5 This version of the Product Activation page is displayed if you selected Use a local license file: SDL TRADOS 2007 INSTALLATION GUIDE 2-15
2 Activating your Product using the SDL Product Activation Wizard lick Browse and navigate to the folder containing the (*.lic) license file. When you have selected the folder, check that the correct details appear in the Select license file box and then click Next. If the product was activated successfully, click Finish to exit the wizard. If product activation failed, click Back to return to a previous page. orrect the folder details you specified and then click Next to continue. 6 This version of the Product Activation page is displayed if you selected Activate your product online. Enter your activation code in the boxes provided. If you have copied the activation code to the clipboard you can press [trl+v] to insert the code in the boxes or you can right-click and select Paste from the shortcut menu. If you use a proxy server to access the Internet, click Advanced. The Advanced Settings dialog box is displayed. Enter the proxy server details and your username and password for the server, then click OK to close the dialog box. 2-16 SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using the SDL Product Activation Wizard 2 D NOTE Your system administrator will tell you if you need to use a proxy server and will give you the server details. 7 lick Next. The wizard connects to the SDL website to validate the code. If the product was activated successfully, click Finish to exit the wizard. If product activation failed because you entered the wrong code, click Back to return to a previous page. Update the activation code and click Next. D NOTE If activation failed for some other reason, speak to your administrator. SDL TRADOS 2007 INSTALLATION GUIDE 2-17
2 Activating your Product using SDL License Manager ATIVATING YOUR PRODUT USING SDL LIENSE MANAGER You can use SDL License Manager to activate your product online, to connect to a floating license server orto connect to a local softkey license file. Activating your Product Online You will need the activation code that you downloaded earlier. D NOTE You must be connected to the Internet to activate a product online. 1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. These tools are used to manage license files These tools are used for online activation and management of licenses activated online D NOTE SDL License Manager can also be displayed by selecting the License Manager option on the product Help menu. 2-18 SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using SDL License Manager 2 2 lick Activate Online to display the Enter Activation ode page. 3 omplete the Enter Activation ode page. Enter your activation code in the boxes provided. If you have copied the code to the clipboard you can press [trl+v] to insert the code in the boxes or you can right-click and select Paste from the shortcut menu. If you use a proxy server to access the Internet, click Advanced. The Advanced Settings dialog box is displayed. Enter the server details and your username and password for the server then click OK to close the dialog box. 4 lick Next. The wizard connects to the Internet to validate the code. SDL TRADOS 2007 INSTALLATION GUIDE 2-19
2 Activating your Product using SDL License Manager If the Activation Failed page is displayed, check the reason for the failure. You can either click Back to go back to an earlier stage and correct the error or click Finish to exit the wizard. If the activation code is valid the Activation Successful page is displayed: 5 lick Finish to exit the wizard. 2-20 SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using SDL License Manager 2 Activating your Product using Floating Licenses You will need the name of the license server and the number of the port used to access the server. Your system administrator will give you this information. To activate your product using floating licenses: 1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager wizard is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 2-21
2 Activating your Product using SDL License Manager 2 lick License Locations. The hange License Locations and Test Files page is displayed. 3 lick Add. The Specify FLEXlm License Location page is displayed. 4 Select the first option: Enter the port and name of the computer where SDL License Server is installed. The box below the option opens ready for editing. 2-22 SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using SDL License Manager 2 5 In the box, enter the name and port of the server where the floating licenses are stored. The format for this information is port number@server name. For example, if your server is server01 and the number of the port to be used is 27000, the entry would look like this: 27000@server01. 6 lick OK. The server is added to the list under License file locations in the hange License Locations and Test Files page. 7 lick OK to close the hange License Locations and Test Files page. The licenses available to borrow now appear in the License Status box. 8 lick lose to close SDL License Manager. SDL TRADOS 2007 INSTALLATION GUIDE 2-23
2 Activating your Product using SDL License Manager Activating your Product using a Personal Softkey License File 1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. 2 lick License Locations. The hange License Locations and Test Files page is displayed. 2-24 SDL TRADOS 2007 INSTALLATION GUIDE
Activating your Product using SDL License Manager 2 3 lick Add. The Specify FLEXlm License Location page is displayed. 4 Select the second option: Enter the path to the license file. The box below the option opens ready for editing. 5 lick Browse and browse to the folder where your license file is stored. 6 Select the file and click OK to close the Specify FLEXlm License Location page. 7 lick OK. The license is added to the list under License file locations in the hange License Locations and Test Files page. 8 lick OK to close the hange License Locations and Test Files page. 9 lick lose to close SDL License Manager. You may have to stop and restart your software in order for the software to start using the license file. SDL TRADOS 2007 INSTALLATION GUIDE 2-25
2 Managing Licenses for Products Activated Online MANAGING LIENSES FOR PRODUTS ATIVATED ONLINE The tools available for managing products activated online enable you to: View your licenses. Return a license so that it can be used on another computer. Repair a license. Viewing Licenses The Installed Licenses dialog box lists the licenses that you currently have installed. The list includes both trials and activated products.each license is shown as a Fulfillment. To view your installed licenses: 1 Go to Start > Program Files > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. 2 lick View Licenses. The Installed Licenses dialog box is displayed. 2-26 SDL TRADOS 2007 INSTALLATION GUIDE
Managing Licenses for Products Activated Online 2 3 To view a license in detail, double-click the license entry in the Fulfillment ID column. The License Details dialog box is displayed. 4 lick lose to close the License Details dialog box. 5 lick lose to close the Installed Licenses dialog box. SDL TRADOS 2007 INSTALLATION GUIDE 2-27
2 Managing Licenses for Products Activated Online Returning a License or Licensing your Product on a Different omputer To license your product on a different computer you simply return the license to the SDL licensing website and then use the same activation code to activate the product on the other computer. 1 Go to Start > Program Files > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. 2 lick View Licenses. The Installed Licenses dialog box is displayed. 3 Select the license to be returned and click Return License. The license is returned to the online product activation centre. You can now install the product on another machine and then activate the product online using the same product activation key. F WARNING If you do not return your license, you will not be able to activate the product on another machine. 2-28 SDL TRADOS 2007 INSTALLATION GUIDE
Managing Licenses for Products Activated Online 2 Repairing a License If your license is damaged, this procedure describes how to get it repaired. A license may become damaged if it has been restored from a backup and needs to be verified or if the system clock on your computer has changed. D NOTE You cannot repair a damaged 30 day trial license. 1 Go to Start > Program Files > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. 2 lick View Licenses. The Installed Licenses dialog box is displayed. 3 Select the license to be repaired and click Repair License. The repair request is sent to the online product activation centre. If the repair is successful a dialog box confirms that the repair has been made and the status of the license changes to OK in the Status column of the Installed License dialog box. Go to step 7. If the license could not be repaired the Damaged License Removed dialog box is displayed and the license is deleted from the list in the Installed Licenses dialog box. lick lose to close the Damaged License Removed dialog box. 4 lick lose to close the Installed Licenses dialog box. SDL TRADOS 2007 INSTALLATION GUIDE 2-29
2 Managing Floating License Files If your license cannot be repaired and has been removed from the Installed Licenses dialog box: Log on to the SDL customer website and return your license. When you have successfully returned the license, activate the product online using the original activation code. If you are not able to return the license, contact SDL support. MANAGING FLOATING LIENSE FILES This section describes how to: Borrow a floating license so that you can work with the SDL Trados 2007 product when you are not connected to the network. Return a borrowed floating license early. Switch to a different floating license server. Borrowing a Floating License If you need to use an SDL Trados product when not connected to the network you can borrow a floating license. For example, you may want to use an SDL Trados product on a laptop computer when visiting a customer site. When you borrow a license you specify how long you will need the license and it remains valid on your computer until the period you specified expires. When this period of time expires you do not have to return the license: it simply ceases to be valid for your copy of the software. At the time the licence ceases to be valid for you, it automatically becomes available for other users to borrow. If you finish working with the SDL Trados software before the end of the loan period, you can choose to return the license early. 2-30 SDL TRADOS 2007 INSTALLATION GUIDE
Managing Floating License Files 2 To borrow a floating license: 1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. 2 lick Borrow or Return. The Borrow a License dialog box is displayed. 3 From the list displayed under hoose the applications, select the application(s) for which you want to borrow a license. 4 omplete the Borrow license until boxes by selecting the date and time when you will be ready to return the license. 5 lick Borrow. The following dialog box is displayed: 6 lick OK to close the dialog box. 7 lick lose to close the Borrow a License dialog box. 8 lick lose to close the SDL License Manager dialog box. You can see the current status of your license by selecting Help > About from the menu bar of the SDL Trados application for which the license was borrowed. SDL TRADOS 2007 INSTALLATION GUIDE 2-31
2 Managing Floating License Files Returning a Borrowed License Early If you no longer need a borrowed license and the loan period has not yet expired, you can return the license early. D NOTE If you do not return the license early, it will be returned automatically at the date and time you specified as the end of the loan period. To return a borrowed license early: 1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. 2 lick Borrow or Return. The Borrow a License dialog box is displayed. 3 Select the application for which you are returning the license and click Return Early. The following dialog box is displayed: 4 lick OK to close the dialog box. 5 lick lose to close the Borrow a License dialog box. 6 lick lose to close the SDL License Manager dialog box. 2-32 SDL TRADOS 2007 INSTALLATION GUIDE
Managing Floating License Files 2 hanging your Floating License Server If your organization moves its floating licenses to a different server, you will have to update SDL License Manager with details of the new server. To update SDL License Manager with new license server details: 1 Go to Start > Programs > SDL International > SDL Trados 2007 > License Manager > License Manager. The SDL License Manager dialog box is displayed. 2 lick License Locations. The hange License Locations and Test Files dialog box is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 2-33
2 Managing Floating License Files 3 lick Edit. The Specify SDL FLEXlm License Location dialog box is displayed. 4 hange the server and port details currently displayed under Enter the port and name of the computer where SDL License Server is installed and click OK. The updated server details appear under License file locations in the hange License Locations and Test Files dialog box. 2-34 SDL TRADOS 2007 INSTALLATION GUIDE
Managing Floating License Files 2 5 lick OK to close the hange License Locations and Test Files dialog box. The licenses available to borrow now appear in the License Status box of the SDL License Manager dialog box. 6 lick lose to close SDL License Manager. SDL TRADOS 2007 INSTALLATION GUIDE 2-35
2 Demo Mode DEMO MODE When copy protected SDL Trados 2007 software is running in demo mode, the following restrictions apply: Application Restriction Translator's Workbench Translation memories may contain a maximum of 100 translation units Export Frequent Segments, Export Unknown Segments, Use TM from Previous Analysis and reate Project TM options in the Analyse dialog box are not available WinAlign Projects may contain a maximum of 20 files (10 source and 10 target files) You cannot save alignment result files and you cannot export alignment results S-Tagger for FrameMaker Maximum file sizes handled: MIF files: 300 KB RTF files: 50 KB TXT files: 25 KB IASII files: 30 KB S-Tagger for Interleaf Maximum file sizes handled: RTF files: 50 KB TXT files: 25 KB Font Mapper for FrameMaker Font Mapper for Interleaf Only processes MIF files of up to 300 KB in size Only processes IASII files of up to 300 KB in size 2-36 SDL TRADOS 2007 INSTALLATION GUIDE
INSTALLING SDL TRADOS 2007 SUITE PROFESSIONAL This chapter contains all the information you need to install SDL Trados 2007 Suite Professional. It describes the hardware and software requirements for running SDL Trados 2007 Suite Professional and provides a step by step guide to installing SDL Trados 2007 Suite. Sections include: System Requirements About the SDL Trados 2007 Suite Professional Installer Installing SDL Trados 2007 Suite -Professional Maintaining your Installation What s Next? hapter 3
3 Overview OVERVIEW This chapter explains the system requirements for installing and running SDL Trados 2007 Suite and how to install SDL Trados 2007 Suite - Professional. SYSTEM REQUIREMENTS This section outlines the system requirements for installing and running SDL Trados 2007 Suite - Professional. Hardware The minimum specification for using SDL Trados 2007 Suite - Professional is a P with a 1 GHz Pentium IV or higher compatible processor and at least 512 MB RAM. We recommend 1024 MB. 300 MB of available disk space is required. A mouse or similar pointing device is required. Platforms SDL Trados 2007 Suite - Professional runs on Windows 2000, Windows XP and Windows Vista. On all Windows versions, we recommend that you remove support for any non-western languages you do not work with from both the Windows Regional Options and the Microsoft Office Language Settings. We highly recommend only using the languages that you are translating into and from in both Windows and Word. For more information on how to achieve this, see the Windows and Word online help systems. Your display settings should be set to at least 256 colours (in Start > Settings > ontrol Panel > Display > Settings). 3-2 SDL TRADOS 2007 INSTALLATION GUIDE
System Requirements 3 ompanion Software Required by SDL Trados 2007 Suite - Professional This is the non-sdl software that you need to have installed on your machine in order for SDL Trados 2007 Suite - Professional to function fully. Microsoft Word 2000 or later. Translator's Workbench requires this for processing Word or RTF-based files. Microsoft Excel 2000 or later. This is required for processing Excel files. Microsoft PowerPoint 2000 or later. This is required for processing PowerPoint files. Microsoft Internet Explorer 6 or higher is required to use the HTML-based help systems that ship with SDL Trados 2007 Suite. If you do not already have Internet Explorer 6, you will need to download it from the Microsoft website. Language Support In general, language support in SDL Trados 2007 Professional corresponds to the language support that is installed on your system. For more information about specific support for bidirectional and double-byte character set (DBS) languages in Translator s Workbench, see the online help. We recommend using a localized version of Windows 2000, Windows XP or Windows Vista for translating to and from non-western, bi-directional and DBS languages. If you are working with Hindi or other Indic languages, we highly recommend that you use the Arial Unicode MS font. This font ships with Microsoft Office. For more information on this font, refer to the Microsoft website and knowledge base. Upgrading from an Earlier Version of SDL Trados It is not necessary to uninstall earlier versions of SDL Trados before installing SDL Trados 2007 Suite. You can install SDL Trados 2007 Suite on the same machine where earlier versions are installed and continue to use the old versions with the new one. However, you cannot use different SDL Trados versions at the same time. SDL TRADOS 2007 INSTALLATION GUIDE 3-3
3 About the SDL Trados 2007 Suite Professional Installer ABOUT THE SDL TRADOS 2007 SUITE PROFESSIONAL INSTALLER This section describes the software components that are included in the SDL Trados 2007 Suite - Professional installation program. SDL Trados 2007 Suite - Professional omponents This is a complete list of SDL Trados 2007 Suite - Professional components. In a default installation they are all installed. SDL Trados 2007 Synergy SDLX *Translator s Workbench *TagEditor *WinAlign *S-Taggers *Font Mappers *Story ollectors Provides translation and translation project management tools. Provides project creation and management tools for SDL Trados. Project management can quickly create and distribute projects and track project progress in real-time. Project team members work with project files using SDL Trados translation tools and share project resources such as translation memories online. Enables SDL Trados 2007 to handle files created in SDLX and SDL TMS. The SDL Trados 2007 translation memory tool. A special tool for editing tagged files. Enables you to create translation memories from previously translated files. onverts FrameMaker MIF or Interleaf files to a tagged format so that tags are preserved correctly during translation. Maps fonts into Asian fonts when translating FrameMaker and Interleaf files. Extracts translatable text from PageMaker and QuarkXPress files. 3-4 SDL TRADOS 2007 INSTALLATION GUIDE
About the SDL Trados 2007 Suite Professional Installer 3 SDL Passolo Essential *Activation Utility for SDL Trados 2007 A localization tool for text resource translation and software localization. Text resources are the text components of a software that are displayed on screen. SDL Passolo Essential includes all main functions needed for the localization of software, however there are some restrictions compared to the Professional and Team Editons of the software. For more information, refer to the SDL Passolo Getting Started Guide and SDL Passolo Handbook included with SDL Passolo Essential. You can access this documentation from the Start view in SDL Trados Synergy or through the Windows Start menu under All Programs > SDL Passolo > Manuals. You will need this to activate your SDL Trados 2007 product on line. D NOTE It is possible to choose not to install the components marked with an asterisk (*). This would be a ustom installation. The latest Word template file is automatically installed with Translator s Workbench. The templates are: TRADOS8.dot for Word 2000-2003 and TRADOS8.dotm for Word 2007. This template is necessary to enable the SDL Trados - Word editing interface. There is a further SDL Trados component, SDL Trados Desktop SDK. This component is not included in a default installation as it is a software developer tool not a translation tool. Other Software Installed with SDL Trados 2007 Suite In addition to SDL Trados 2007 Suite components, other software is included in the installation program. This additional software is required either by the installation program itself or by SDL Trados 2007 Suite - Professional. You will probably have some of these additional software components on your computer already as they are used by many software applications: Install Script Engine 10.5 Windows Installer 3.1 Microsoft.NET Framework version 2.0. Java Runtime Engine (such as version JRE1.5.0_10) is required to translate R, OpenOffice, Java Properties and InDesign S2 (INX) files. If Java Runtime Engine is not installed on your machine, the SDL Trados 2007 Suite installer program will install it for you. SDL TRADOS 2007 INSTALLATION GUIDE 3-5
3 About the SDL Trados 2007 Suite Professional Installer Installation Location The default installation location for SDL Trados 2007 Suite - Professional components is: :\Program Files\SDL International\T2007. The default installation for SDL Passolo Essential is: :\Program Files\SDL Passolo 2007. During installation, you have the option of choosing a different installation location. This choice applies to the root folder for SDL Trados 2007 Suite Professional software, the T2007 folder. You can also choose a different installation location for SDL Passolo Essential. All components of SDL Trados 2007 Suite Professional, apart from SDL Passolo Essential, install to their respective subfolders below the SDL Trados 2007 folder at the specified location. It is not possible to install components to different instances of the SDL Trados 2007 folder on the same computer. The installer guarantees that all SDL Trados 2007 Suite Professional components are located in the same SDL Trados 2007 folder. D NOTE Access restrictions to certain SDL Trados 2007 Suite Professional files and folders may apply to some users on Windows Vista, Windows 2000 or Windows XP systems. For more information, see Access Restrictions on page 2-32. 3-6 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 INSTALLING SDL TRADOS 2007 SUITE - PROFESSIONAL The installation routine for SDL Trados 2007 Suite - Professional is based on an installation wizard which guides you through the setup process. To install SDL Trados 2007 Suite - Professional on a Windows Vista, Windows 2000 or Windows XP operating system, you must have local administrator rights. The installer also supports administrative and silent installation. For information about an administrative installation, See Other Installation Options on page 3-27. For more information about a silent installation, See Silent Installation on page 3-28. Installing SDL Trados 2007 Suite - Professional Before you start: Locate either the downloaded product files or the product D. Ensure that you have Internet Explorer 6 installed. If you want to log the installation, read the instructions on page 3-28. To install SDL Trados 2007 Suite Professional: 1 If you downloaded the product from a website, double-click the downloaded file. The SDL Trados 2007 Suite - Professional wizard is displayed. This wizard prepares the product installation files and places them in the correct location. Move through the wizard by clicking Next and accepting the default values offered until the Welcome to SDL Trados 2007 Suite - Professional page is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 3-7
3 Installing SDL Trados 2007 Suite -Professional If you have a product D, run the D. The Welcome to SDL Trados 2007 Suite - Professional page is the first page to be displayed. 2 On the Welcome to SDL Trados 2007 Suite - Professional page, click the Installation Software link. The Installation Software page is displayed. 3-8 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 3 lick Install SDL Trados 2007 Suite. The opening screen of the SDL Trados 2007 Suite Installer is displayed. It lists the software that will be installed. To install all components, go to step 4. To remove an item from the list, click Advanced. The omponents List dialog box is displayed. lear the selection from the item not to be installed and click OK. Remember that all of the components are necessary for SDL Trados 2007 Suite to run. 4 lick Install. If you do not currently have the.net Framework 2.0 installed, it is installed now. Installation will take a few minutes. SDL TRADOS 2007 INSTALLATION GUIDE 3-9
3 Installing SDL Trados 2007 Suite -Professional If you do not currently have the Windows Installer 3.1 or the Install Script Engine installed, these will be installed first. To install these components accept the license conditions for use and keep clicking Next. 5 If you do not currently have the Microsoft Visual ++ 2005 Redistributable installed, this dialog box is displayed next. lick Yes. This dialog box is displayed. It indicates that the Microsoft Visual ++ 2005 Redistributable software is being installed. 6 If you do not currently have the Java 2 Runtime Environment installed this dialog box is displayed next. 3-10 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 The License Agreement dialog box is displayed when the Java 2 Runtime Environment installation is ready to proceed. lick Accept. The Java 2 Runtime Environment is now installed. SDL TRADOS 2007 INSTALLATION GUIDE 3-11
3 Installing SDL Trados 2007 Suite -Professional 7 After a few minutes, when the installation is complete, the Next button is activated. lick Next, the Welcome page of the SDL Trados 2007 Suite installation wizard is displayed. 8 lick Next. The License Agreement page for SDL Trados 2007 Suite is displayed. 3-12 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 9 Accept the license terms and click Next. The ustomer Information page is displayed. 10 Enter your details and click Next. The Setup Type page is displayed.a Default installation is selected by default. 11 If you want to perform a default installation, click Next. The Ready to Install page is displayed. Go to step 12. SDL TRADOS 2007 INSTALLATION GUIDE 3-13
3 Installing SDL Trados 2007 Suite -Professional 12 If you do not want to install all of the default components, select ustom and click Next. The ustom Setup page is displayed. Items with a red beside them will not be installed. To see what sub-features are included in a component, click the plus (+) sign preceding the component. To exclude a component from the installation, click the down arrow beside the component and select This feature will not be available. To include a currently excluded component, click the down arrow beside the component and select This feature and all subfeatures will be installed on local hard drive. To change the default installation location, click hange and complete the hange urrent Installation Folder dialog box. When you have selected the required location, click OK. To view the space requirements for the software, click Space to display the Disk Space Requirements dialog box. lick OK when you have finished. 3-14 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 13 lick Next. The Ready to Install Program page is displayed. 14 lick Install to begin installing SDL Trados 2007 Suite. A status bar indicates installation progress. 15 When SDL Trados 2007 Suite has been installed the End-User License Agreement page for SDL Trados Synergy is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 3-15
3 Installing SDL Trados 2007 Suite -Professional 16 Accept the license terms and click Next. The Destination Folder page is displayed. If you want to install SDL Trados Synergy to a different location, click Browse. The hange Destination Folder dialog box is displayed. Navigate to the required folder and click OK to return to the Destination Folder page. 17 lick Next. The Ready to install SDL Trados Synergy 2007 page is displayed. 3-16 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 18 lick Install. The Installing SDL Trados Synergy 2007 page is displayed. The Status bar shows installation progress. 19 When SDL Trados Synergy has been installed the ompleted the SDL Trados Synergy 2007 Setup Wizard page is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 3-17
3 Installing SDL Trados 2007 Suite -Professional 20 lick Finish. The SDLX installer is launched. 21 lick Next the SDLX 2007 License Agreement page is displayed. 3-18 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 22 Accept the terms of the license and click Next. The hoose Destination Location page is displayed. It shows where SDLX 2007 will be installed. To install SDLX to a different location click Browse and use the hoose Location dialog box to select the location. 23 lick Next. The Ready to Install Program page is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 3-19
3 Installing SDL Trados 2007 Suite -Professional 24 lick Install to begin the SDLX 2007 installation. When SDLX has been installed the SDLX Installation Wizard ompleted page is displayed 25 lick Finish. The SDL Passolo Essential installer is launched. 3-20 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 26 lick Next. The Destination Location page is displayed. If you want to install SDL Passolo Essential to a different location, click Browse. The Select Destination Location dialog box is displayed. Navigate to the required folder and click OK to return to the Destination Location page. 27 lick Next. The Select omponents page is displayed. It lists the different items that will be installed. To install all items, go to step 28. SDL TRADOS 2007 INSTALLATION GUIDE 3-21
3 Installing SDL Trados 2007 Suite -Professional To remove an item from the list, clear the check box next to the item. To install SDL Passolo, ensure that the check box next to Program Files is selected. 28 lick Next. The Important Note page is displayed. 29 If you have a previous install of SDL Passolo Essential running on your machine, close the application and then click Next. The Start Installation page is displayed. 3-22 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 30 lick Install to begin installing SDL Passolo Essential. The Installing page is displayed. The All Files section shows installation progress. Microsoft Primary Interperability Assemblies 2005 is installed. Your system configuration is updated with the SDL Passolo Essential install. SDL TRADOS 2007 INSTALLATION GUIDE 3-23
3 Installing SDL Trados 2007 Suite -Professional 31 When SDL Passolo Essential has been installed, the following page is displayed. 32 lick Finish. The product Activation Utility for SDL Trados 2007 Suite prepares to install. 3-24 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite -Professional 3 33 When the activation utility has been installed the SDL Product Activation wizard is displayed. 34 hoose an option and click Next. The options available are: Go to the SDL website and purchase a software license for SDL Trados 2007 Suite. Activate a license you have already purchased. Work with the software free of charge for 30 days in trial mode. D NOTE For more information about the Product Activation Wizard, See Activating your Product using the SDL Product Activation Wizard on page 2-13. 35 If you chose either of the first two options you are taken to the appropriate screen and guided through the rest of the selected process. 36 If you chose to continue with the free trial, the installation is now complete. SDL Trados 2007 Suite is now added to the Start menu on your desktop. Use the Start menu to launch each component as a stand-alone application. SDL TRADOS 2007 INSTALLATION GUIDE 3-25
3 Installing SDL Trados 2007 Suite -Professional Licensing You can now use SDL Trados 2007 Suite for 30 days before you need to purchase a valid license and activate the product. If after 30 days you have not yet purchased a license, SDL Trados 2007 Suite and SDL Trados Synergy 2007 will cease to function or will function in demo mode only. For more information about licensing, see hapter 2 Licensing SDL Trados 2007. For more information about demo mode, see Demo Mode on page 2-36. 3-26 SDL TRADOS 2007 INSTALLATION GUIDE
Other Installation Options 3 OTHER INSTALLATION OPTIONS Administrators may wish to use these alternative methods for distributing and installing SDL Trados 2007 Suite. Administrative Installation In an administrative installation, the system administrator copies the installer files to a location that is always available, typically a network drive. This means that the setup files are permanently accessible to anyone who wants to install SDL Trados 2007 Suite or modify or repair their SDL Trados 2007 Suite installation. To perform an administrative installation of SDL Trados 2007 Suite: 1 From the Start menu, choose Run. In the Run dialog box, use the following syntax to specify the location of the SDL Trados 2007 Suite setup files if you downloaded the installer: Msiexec /a "c:\path to msi\sdl Trados 2007.msi". If you are using a product D, insert the SDL Trados 2007 Suite product D into the computer s D-ROM drive and use the following syntax in the Run dialog box to specify the location of the SDL Trados 2007 Suite setup files: Msiexec /a "d:\path to msi\sdl Trados 2007.msi". Msiexec is the Windows installer service. /a denotes an administrative installation. c:\ is the hard drive, d:\ is the D-ROM drive. 2 lick OK to start the installation wizard. 3 On the Network Location screen, specify the target location for the copy you make of the setup files. 4 lick Install to create the copy in the specified location. 5 When the process is complete, click Finish to close the installation wizard. D NOTE This procedure only copies the SDL Trados 2007 Suite setup files to the specified location; it does not constitute an actual installation. Use the setup files to run the installation wizard and install, modify or repair the software in the usual way. SDL TRADOS 2007 INSTALLATION GUIDE 3-27
3 Other Installation Options Logging an Installation It is possible to log an installation to a TXT or LOG file. This log file provides the installation results and is useful for troubleshooting any installation problems. To log an installation: 1 From the Start menu on your computer, choose Run. In the Run dialog box, use the following syntax to specify the location and file name of your setup files and the installation log file: Msiexec /I "c:\path to msi\myinstall.msi" /l*v "c:\path to logfile\mylog.txt" Msiexec is the Windows installer service. /i denotes the installation request. /l*v denotes a verbose log file. To customize the installation log file, substitute /l*v with the alternatives below: /le denotes a log file containing errors only. /lw denotes a log file containing warnings only. /lp+ denotes a log file containing properties only. 2 lick OK to start the installation and create the installation log file. D NOTE When you run Setup.exe it automatically creates a log file. Silent Installation To perform a silent installation: 1 Select Run from the Start menu. 2 Enter the command: msiexec.exe /i "<ompletepathto 'SDL Trados 2007.msi'>" /qn This runs the default installation. The installation location is the same as for a standard installation. See Installation Location on page 3-6. For more information about silent installation, see the online support center at support.sdl.com. 3-28 SDL TRADOS 2007 INSTALLATION GUIDE
Maintaining your Installation 3 MAINTAINING YOUR INSTALLATION You can modify, repair or remove your SDL Trados 2007 Suite installation at any time using the program maintenance features available with the installer. These features are available on the Program Maintenance screen of the installation wizard: Modify use this option to add or remove components to and from your installation. Repair use this option to repair or restore missing files, shortcuts or registry entries in your installation. Remove use this option to remove the SDL Trados 2007 Suite software set completely from your computer. You can access the installation wizard and program maintenance features through the Add or Remove Programs Properties dialog box in the ontrol Panel of your computer. Alternatively, if you still have access to the installer setup files, you can start the wizard by double-clicking the SDL Trados 2007.msi file. D NOTE To repair or modify your SDL Trados 2007 Suite installation, you must have access to the installer setup files in their original location. Modifying your Installation You can add or remove components from your current installation. You can modify SDL Trados 2007 Suite, SDL Trados Synergy and SDLX. To modify your installation: 1 From the Start menu on your computer, choose Settings > ontrol Panel. 2 In the ontrol Panel, select Add or Remove Programs to open the Add or Remove Programs dialog box. 3 Select SDL Trados 2007 Suite from the list of programs and click hange. This starts the SDL Trados 2007 Suite installation wizard. SDL TRADOS 2007 INSTALLATION GUIDE 3-29
3 Maintaining your Installation 4 In the installation wizard, click Next to continue to the Program Maintenance screen: 5 In the Program Maintenance screen, select Modify and then Next to continue. 6 The ustom Setup screen is displayed. It lists all SDL Trados 2007 Suite components and indicates which components are currently included in your installation. lick on the plus (+) signs in the component tree to display all subfeatures. Select the components to add to your installation. Note that subfeatures cannot be installed independently of their parent features. 3-30 SDL TRADOS 2007 INSTALLATION GUIDE
Maintaining your Installation 3 Mark the components to remove from your installation with an X. Removing a parent feature also removes its subfeatures. 7 lick Next to continue and proceed with the installation as outlined in the previous section. Repairing your Installation Use the repair feature to repair or restore missing files or registry entries in your installation. You can repair SDL Trados 2007 Suite, SDL Trados Synergy and SDLX. To repair your installation: 1 From the Start menu on your computer, choose Settings > ontrol Panel. 2 In the ontrol Panel, select Add or Remove Programs. 3 Select SDL Trados 2007 Suite from the list of programs and click hange. This starts the SDL Trados 2007 Suite installation wizard. 4 In the installation wizard, click Next to go to the Program Maintenance screen. 5 In the Program Maintenance screen, select Repair and then Next to continue. 6 On the Ready to Repair Program screen, click Install. The installation wizard automatically runs the repair feature. When it is complete, click Finish. Removing SDL Trados 2007 Applications Use the Remove feature in the installer to remove SDL Trados 2007 Suite, SDL Trados Synergy and SDLX files, folders and registry entries from your computer. The Remove option is available on the Program Maintenance screen of the SDL Trados 2007 Suite installation wizard. For more information on how to access this wizard, See Repairing your Installation on page 3-31. SDL TRADOS 2007 INSTALLATION GUIDE 3-31
3 Maintaining your Installation Access Restrictions Access restrictions to certain SDL Trados 2007 Suite files and folders may apply to some users on Windows Vista, Windows 2000 or Windows XP systems. The files that are most likely to be subject to access restrictions are sample files. Sample The default installation location for SDL Trados 2007 sample files is: :\Documents and Settings\All Users\Shared Documents\SDL Trados\Samples This folder is accessible from the Start menu. Select Programs > SDL International > SDL Trados 2007 > Trados > Samples. To use the sample files a user must have read/write access to the Samples subfolder. Alternatively, the sample files can be copied to a location where the user does have read/write access. The default installation location for SDL Passolo Essential sample files is: :\Documents and Settings\All Users\Documents\Passolo 2007\Samples This folder is accessible from the Start menu. Select Programs > SDL Passolo 2007 > Samples. Sharing a omputer In SDL Trados 2007, all tag (.ini) and filter settings files (.xml) are stored in the folder \Documents and Settings\All Users\Application Data\SDL International\Filters on Windows 2000 and Windows XP operating systems and in the \ProgramData\SDL International\Filters folder on Windows Vista. You must have read/write access to the appropriate folder in order to create filters and work with XML/HTML/SGML files. The owner of a computer is automatically granted read/write access to these folders, however, any other user sharing the machine is not. To avoid Access Denied messages appearing in TagEditor on closing XML/HTML/SGML files or on saving filter settings, it is necessary to give all users using a machine read/write access to the Filters folder. D NOTE On localized operating systems the folder structure partly uses names matching the language of the operating system. For example, on a German Windows XP system the folder is called \Dokumente und Einstellungen\All Users\Anwendungsdaten\SDL International\Filters. 3-32 SDL TRADOS 2007 INSTALLATION GUIDE
What s Next? 3 Technical Support For more information on technical support, please consult the online support center at http://support.sdl.com. WHAT S NEXT? The instructions in the SDL Trados 2007 Suite product user guides help you to quickly get started with SDL Trados Synergy and SDL Trados 2007 Suite components. You can also view the product tutorials for more information on using SDL Trados 2007 Suite. SDL Trados 2007 Suite documentation can be found here: Start > Programs > SDL Trados 2007 > Documentation. The tutorials can be found here: Start > Programs > SDL Trados 2007 > Tutorials. SDL TRADOS 2007 INSTALLATION GUIDE 3-33
3 What s Next? 3-34 SDL TRADOS 2007 INSTALLATION GUIDE
INSTALLING SDL TRADOS 2007 SUITE FREELANE This chapter outlines how to install SDL Trados 2007 Suite Freelance. It outlines system requirements for SDL Trados 2007 Suite Freelance and explains how to install the software. Sections include: Overview About the SDL Trados 2007 Suite - Freelance Installer Installing SDL Trados 2007 Suite - Freelance Maintaining your SDL Trados 2007 Suite Freelance Installation What s Next? hapter 4
4 Overview OVERVIEW This chapter explains the system requirements for installing and running SDL Trados 2007 Suite - Freelance. Hardware The minimum specification for using SDL Trados 2007 Suite - Freelance is a P with a 1 GHz Pentium IV or higher compatible processor and at least 512 MB RAM. We recommend 1024 MB. 300 MB of available disk space is required. A mouse or similar pointing device is required. Platforms SDL Trados 2007 Suite - Freelance runs on Windows Vista, Windows 2000 and Windows XP. On all Windows versions, we recommend that you remove support for any non-western languages you do not work with from both the Windows Regional Options and the Microsoft Office Language Settings. We highly recommend only using the languages that you are translating into and from in both Windows and Word. For more information on how to achieve this, see the Windows and Word online help systems. Your display settings should be set to at least 256 colours (in Start > Settings > ontrol Panel > Display > Settings). ompanion Software Required by SDL Trados 2007 Suite - Freelance This is the non-sdl software that you need to have installed on your machine in order for SDL Trados 2007 Suite Freelance to function fully. Microsoft Word 2000 or later. Translator's Workbench requires this for processing Word or RTF-based files. Microsoft Excel 2000 or later. SDL Trados requires this for processing Excel files. Microsoft PowerPoint 2000 or later. SDL Trados requires this for processing PowerPoint files. Microsoft Excel 2000 or later. This is required for processing Excel files. 4-2 SDL TRADOS 2007 INSTALLATION GUIDE
Overview 4 Microsoft PowerPoint 2000 or later. This is required for processing PowerPoint files. Microsoft Internet Explorer 6 or higher is required to use the HTML-based help systems that ship with SDL Trados 2007 Suite If you do not already have Internet Explorer 6, you will need to download it from the Microsoft website. Language Support In general, language support in SDL Trados 2007 Freelance corresponds to the language support that is installed on your system. For more information about specific support for bidirectional and double-byte character set (DBS) languages in Translator s Workbench, see the online help. We recommend using a localized version of Windows Vista, Windows 2000 or Windows XP for translating to and from non-western, bi-directional and DBS languages. If you are working with Hindi or other Indic languages, we highly recommend that you use the Arial Unicode MS font. This font ships with Microsoft Office. For more information on this font, refer to the Microsoft website and knowledge base. Upgrading from an Earlier Version of SDL Trados It is possible to have SDL Trados 2007 Suite and earlier versions of SDL Trados installed on the same machine. However, you cannot use different application versions at the same time. SDL TRADOS 2007 INSTALLATION GUIDE 4-3
4 Overview SDL Trados 2007 Suite - Freelance Product Restrictions These restrictions apply to the SDL Trados 2007 Suite - Freelance product: Synergy You can create Synergy projects for personal use but you cannot create Synergy project packages for distribution. You can open and work with project packages received from other SDL Trados users. You cannot forward packages received from other users. You can access both file-based and server-based translation memories from Synergy project packages. However, access to server-based translation memories is restricted to access through the Internet (no LAN access). You can connect to project tracking servers. MultiTerm You can access server-based SDL MultiTerm termbases. You can create local, file-based termbases. You cannot open termbases in shared mode. Languages You can only work with five languages. This limit applies to both Synergy projects and SDL Trados translation tools. Translation Memories You can create local, file-based translation memories. You can access server-based translation memories through the Internet. You cannot access translation memories in shared mode. 4-4 SDL TRADOS 2007 INSTALLATION GUIDE
About the SDL Trados 2007 Suite - Freelance Installer 4 ABOUT THE SDL TRADOS 2007 SUITE - FREELANE INSTALLER This section describes the software components that are included in the SDL Trados 2007 Suite Freelance installation program. SDL Trados 2007 Suite Suite - Freelance omponents This is a complete list of SDL Trados 2007 Suite - Freelance components. In a default installation they are all installed. SDL Trados 2007 Synergy SDLX *Translator s Workbench *TagEditor *WinAlign *S-Taggers *Font Mappers *Story ollectors Provides translation and translation project management tools. Provides project creation and management tools for SDL Trados. Project management can quickly create and distribute projects and track project progress in real-time. Project team members work with project files using SDL Trados translation tools and easily share project resources such as translation memories on line. Enables SDL Trados 2007 to handle files created in SDLX and SDL TMS. The SDL Trados 2007 translation memory tool. A special tool for editing tagged files. Enables you to create translation memories from previously translated files. onverts FrameMaker MIF or Interleaf files to a tagged format so that tags are preserved correctly during translation. Maps fonts into Asian fonts when translating FrameMaker and Interleaf files. Extracts translatable text from PageMaker and QuarkXPress files. SDL TRADOS 2007 INSTALLATION GUIDE 4-5
4 About the SDL Trados 2007 Suite - Freelance Installer SDL Passolo Essential *Activation Utility for SDL Trados 2007 A localization tool for text resource translation and software localization. Text resources are the text components of a software that are displayed on screen. SDL Passolo Essential includes all main functions needed for the localization of software, however there are some restrictions compared to the Professional and Team Editons of the software. For more information, refer to the SDL Passolo Getting Started Guide and SDL Passolo Handbook included with SDL Passolo Essential. You can access this documentation from the Start view in SDL Trados Synergy or through the Windows Start menu under All Programs > SDL Passolo > Manuals. You will need this to activate your SDL Trados 2007 product on line. D NOTE It is possible to choose not to install the components marked with an asterisk (*). This would be a ustom installation. The latest Word template file is automatically installed with Translator s Workbench. The templates are: TRADOS8.dot for Word 2000-2003 and TRADOS8.dotm for Word 2007. This template is necessary to enable the SDL Trados - Word editing interface. Other Software Installed with SDL Trados 2007 Suite In addition to SDL Trados 2007 Suite components, other software is included in the installation program. This additional software is required either by the installation program itself or by SDL Trados 2007 Suite Freelance. You will probably have some of these additional software components on your computer already as they are used by many software applications: Install Script Engine 10.5 Windows Installer 3.1 Microsoft.NET Framework version 2.0. Java Runtime Engine (such as version JRE1.5.0_10) is required to translate R, OpenOffice, Java Properties and InDesign S2 (INX) files. If Java Runtime Engine is not installed on your machine, the SDL Trados 2007 Suite installer program will install it for you. 4-6 SDL TRADOS 2007 INSTALLATION GUIDE
About the SDL Trados 2007 Suite - Freelance Installer 4 Installation Location The default installation location for SDL Trados 2007 Suite - Freelance components is: :\Program Files\SDL International\T2007_FL. The default installation for SDL Passolo Essential is: :\Program Files\SDL Passolo 2007. During installation, you have the option of choosing a different installation location. This choice applies to the root folder for SDL Trados 2007 Suite Freelance software, the T2007_FL folder. You can also choose a different installation location for SDL Passolo Essential. All components of SDL Trados 2007 Suite - Freelance, apart from SDL Passolo Essential install to their respective subfolders below the SDL Trados 2007 folder at the specified location. It is not possible to install components to different instances of the SDL Trados 2007 folder on the same computer. The installer guarantees that all SDL Trados 2007 Suite Freelance components are located in the same SDL Trados 2007 folder. D NOTE Access restrictions to certain SDL Trados 2007 Suite - Freelance files and folders may apply to some users on Windows Vista, Windows 2000 or Windows XP systems. See Access Restrictions on page 4-32. SDL TRADOS 2007 INSTALLATION GUIDE 4-7
4 Installing SDL Trados 2007 Suite - Freelance INSTALLING SDL TRADOS 2007 SUITE - FREELANE The installation routine for SDL Trados 2007 Suite - Freelance is based on an installation wizard which guides you through the setup process. To install SDL Trados 2007 Suite Freelance on a Windows Vista, Windows 2000 or Windows XP operating system, you must have local administrator rights. Before you start: Locate the downloaded SDL Trados 2007 Suite - Freelance product files. Ensure that you have Internet Explorer 6 installed. To install SDL Trados 2007 Suite - Freelance: 1 If you downloaded the product from a website, double-click the downloaded file. The SDL Trados 2007 Suite- Freelance wizard is displayed. The wizard prepares the product installation files and places them in the correct location. Move through the wizard by clicking Next and accepting the default values offered until the Welcome to SDL Trados 2007 Suite Freelance page is displayed. If you have a product D, run the D. The Welcome to SDL Trados 2007 Suite - Freelance page is the first page to be displayed. 4-8 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 2 On the Welcome to SDL Trados 2007 Suite - Freelance page, click the Installation Software link. The Installation Software page is displayed. 3 lick Install SDL Trados 2007 Suite - Freelance. The opening screen of the SDL Trados 2007 Suite Installer is displayed. It lists the software that will be installed. SDL TRADOS 2007 INSTALLATION GUIDE 4-9
4 Installing SDL Trados 2007 Suite - Freelance To remove an item from the list, click Advanced. The omponents List dialog box is displayed. lear the selection from the item not to be installed and click OK. Remember that all of the components listed in the omponents List are necessary for Trados 2007 to run. 4 lick Install. If you do not currently have the.net Framework 2.0 installed, it is installed now. Installation will take a few minutes. If you do not currently have the Windows Installer 3.1 or the Install Script Engine installed, these will be installed first. To install these components accept the license conditions for use and keep clicking Next. 4-10 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 5 If you do not currently have the Microsoft Visual ++ 2005 Redistributable installed, this dialog box is displayed next. lick Yes. This dialog box is displayed. It indicates that the Microsoft Visual ++ 2005 Redistributable software is being installed. 6 If you do not currently have the Java 2 Runtime Environment installed this dialog box is displayed next. SDL TRADOS 2007 INSTALLATION GUIDE 4-11
4 Installing SDL Trados 2007 Suite - Freelance The License Agreement dialog box is displayed when the Java 2 Runtime Environment installation is ready to proceed. lick Accept. The Java 2 Runtime Environment is now installed. 4-12 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 7 After a few minutes, when the other components have been installed, the Welcome page of the SDL Trados 2007 Suite Freelance installation wizard is displayed. 8 lick Next to display the License Agreement page. SDL TRADOS 2007 INSTALLATION GUIDE 4-13
4 Installing SDL Trados 2007 Suite - Freelance 9 Read through the contents of the license agreement, select I accept the terms in the license agreement and click Next. The ustomer Information page is displayed. 10 Enter your details and select one of the options under Install this application for to indicate whether other users can use this copy of SDL Trados Freelance. 11 lick Next. The Language Selection page is displayed. 4-14 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 This page lists all languages supported by SDL Trados 2007 Suite Freelance. Select the languages you want to work with. You must select a minimum of two languages and a maximum of five. To select a language, select it in the Available Languages box and then click the right arrow to add it to the Selected Languages box. The selected languages, and their sublanguages will be available in the language lists of Translator s Workbench, WinAlign and Synergy. D NOTE It is important to select your languages carefully as revising your selections later requires a modification to your installation. 12 lick Next. The Setup Type page is displayed. 13 hoose a setup option: hoose Default to install all SDL Trados 2007 Suite Freelance components to the default location. This is the recommended option. Go to step 13. Select ustom, only if you want to perform a component-based installation or you want to change the location of your installation. SDL TRADOS 2007 INSTALLATION GUIDE 4-15
4 Installing SDL Trados 2007 Suite - Freelance 14 lick Next, the ustom Setup page is displayed. By default, all features/components are selected for installation. To see what sub-features are included in a component, click the plus (+) sign preceding the component. You cannot select sub-features and exclude them from the installation. To exclude a component from the installation, click the down arrow beside the component and select This feature will not be available. A red is displayed on the icon to indicate that it will not be installed. To include a currently excluded component, click the down arrow beside the component and select This feature and all subfeatures will be installed on local hard drive. To change the default installation location, click hange and complete the hange urrent Installation Folder dialog box. When you have selected the required location, click OK. To view the space requirements for the software, click Space to display the Disk Space Requirements dialog box. lick OK when you have finished. 4-16 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 15 lick Next. The Ready to Install the Program page is displayed. 16 lick Install to begin the SDL Trados 2007 Suite Freelance installation. If you want to check or change your previous selections, click Back. 17 When SDL Trados 2007 Suite Freelance has been installed the InstallShield Wizard omplete page is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 4-17
4 Installing SDL Trados 2007 Suite - Freelance 18 lick Finish. The SDL Trados 2007 Suite Synergy Setup wizard now begins. The Welcome page is displayed. 19 When the Next button becomes available, click it to display the End-User License Agreement page. 4-18 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 20 Read the terms of the agreement, select the I accept the terms... box and click Next. The Destination Folder page is displayed. 21 lick Next to install SDL Trados Synergy to the default location. The Ready to Install page is displayed. To select a different installation location, click the Browse button and navigate to the required location. SDL TRADOS 2007 INSTALLATION GUIDE 4-19
4 Installing SDL Trados 2007 Suite - Freelance 22 lick Install to begin the installation. The Installing SDL Trados Synergy page is displayed. A status bar indicates installation progress. 23 When Synergy has been installed the ompleted the SDL Trados Synergy 2007 Setup Wizard page is displayed. 4-20 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 24 lick Finish. The SDLX installer begins. 25 lick Next. The SDLX 2007 License Agreement page is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 4-21
4 Installing SDL Trados 2007 Suite - Freelance 26 Accept the terms of the license and click Next. The hoose Destination Location page is displayed. It shows where SDLX 2007 will be installed. To install SDLX to a different location click Browse and use the hoose Location dialog box to select the location. 27 lick Next. The Ready to Install Program page is displayed. 4-22 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 28 lick Install to begin the SDLX 2007 installation. When SDLX has been installed the SDLX Installation Wizard ompleted page is displayed 29 lick Finish. The SDL Passolo Essential installer is launched. SDL TRADOS 2007 INSTALLATION GUIDE 4-23
4 Installing SDL Trados 2007 Suite - Freelance 30 lick Next. The Destination Location page is displayed. If you want to install SDL Passolo Essential to a different location, click Browse. The Select Destination Location dialog box is displayed. Navigate to the required folder and click OK to return to the Destination Location page. 31 lick Next. The Select omponents page is displayed. It lists the different items that will be installed. To install all items, go to step 32. 4-24 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 To remove an item from the list, clear the check box next to the item. To install SDL Passolo, ensure that the check box next to Program Files is selected. 32 lick Next. The Important Note page is displayed. 33 If you have a previous install of SDL Passolo Essential running on your machine, close the application and then click Next. The Start Installation page is displayed. SDL TRADOS 2007 INSTALLATION GUIDE 4-25
4 Installing SDL Trados 2007 Suite - Freelance 34 lick Install to begin installing SDL Passolo Essential. The Installing page is displayed. The All Files section shows installation progress. Microsoft Primary Interperability Assemblies 2005 is installed. Your system configuration is updated with the SDL Passolo Essential install. 4-26 SDL TRADOS 2007 INSTALLATION GUIDE
Installing SDL Trados 2007 Suite - Freelance 4 35 When SDL Passolo Essential has been installed, the following page is displayed. 36 lick Finish. The product Activation Utility for SDL Trados 2007 Suite prepares to install. SDL TRADOS 2007 INSTALLATION GUIDE 4-27
4 Installing SDL Trados 2007 Suite - Freelance 37 When the activation utility has been installed the SDL Product Activation wizard is displayed. 38 hoose an option and click Next. The options available are: Go to the SDL website and purchase a software license for SDL Trados 2007 Suite. Activate a license you have already purchased. Work with the software free of charge for 30 days in trial mode. D NOTE For more information about the Product Activation Wizard, See Activating your Product using the SDL Product Activation Wizard on page 2-13. 39 If you chose either of the first two options you are taken to the appropriate screen and guided through the rest of the selected process. 40 If you chose to continue with the free trial, the installation is now complete. SDL Trados 2007 Suite Freelance and Synergy are now added to the Start menu on your desktop. Use the Start menu to launch each component as a stand-alone application. 4-28 SDL TRADOS 2007 INSTALLATION GUIDE
Maintaining your SDL Trados 2007 Suite Freelance Installation 4 MAINTAINING YOUR SDL TRADOS 2007 SUITE FREELANE INSTALLATION You can modify, repair or remove your SDL Trados 2007 Suite Freelance installation at any time using the program maintenance features available with the SDL Trados 2007 Suite Freelance installer. These features are available on the Program Maintenance page of the installation wizard as follows: Modify use this option to add or remove components to and from your installation. Repair use this option to repair or restore missing files, shortcuts or registry entries in your installation. Remove use this option to remove SDL Trados 2007 Suite Freelance software completely from your computer. You can access the SDL Trados 2007 Suite Freelance installation wizard and program maintenance features through the Add or Remove Programs dialog box in the ontrol Panel of your computer. D NOTE To repair or modify your SDL Trados 2007 Suite Freelance installation, you must have access to the installer setup files in their original location. Modifying your Installation Use the modify feature in the SDL Trados 2007 Suite Freelance installer to add or remove components from your current installation. 1 From the Start menu on your computer, choose Settings > ontrol Panel. 2 In the ontrol Panel, select Add or Remove Programs to open the Add or Remove Programs dialog box. 3 In the urrently installed programs list, select SDL Trados 2007 Suite Freelance and click hange. This starts the SDL Trados 2007 Suite Freelance installation wizard. SDL TRADOS 2007 INSTALLATION GUIDE 4-29
4 Maintaining your SDL Trados 2007 Suite Freelance Installation 4 In the installation wizard, click Next to continue to the Program Maintenance page: 5 On the Program Maintenance page, select Modify and then Next to continue. 6 The ustom Setup page lists all the SDL Trados 2007 Suite Freelance components and indicates which components are currently included in your installation. lick the plus (+) signs in the component tree to display all subfeatures. Select the components to add to your installation. Note that subfeatures cannot be installed independently of their parent features. 4-30 SDL TRADOS 2007 INSTALLATION GUIDE