ONSITE TRAINING CLIENT GUIDELINES

Transcription

1 ONSITE TRAINING LIENT GUIDELINES

2 ONSITE SETUP REQUIREMENTS Thank you for purchasing SDL Training! This document has been created to offer you the requirements and setup in advance of onsite training. Training Logistics Training Times: All onsite training sessions begin at 09:30am and end at 7:30pm. If the start and end time of the training session is not acceptable, please contact the training department at to organize a more suitable time. The trainer will arrive at 09:00am to setup in advance of the start time. Assigned Breaks: A 0 minutes coffee break is offered in the morning and afternoon. Lunch is hour in duration. The lunch break will be offered in the early afternoon. Feedback: Participant should complete the training evaluation survey at the end of the training session. The training evaluation surveys, which are hosted by Survey Monkey, can be found via the following url: Training Machine Setup The training machines must have the latest version of the software installed. The latest version of the SDL Trados technology is SDL Trados Studio The product package contains the following builds: SDL Trados Studio 2009, version SDL Trados 2007, build 863 SDL Trados Synergy, version SDLX, build 7044 The latest version of the SDL MultiTerm technology is SDL MultiTerm 2009, version System requirements for SDL Trados Studio 2009 Hardware GHz Pentium IV or higher compatible processor and GB RAM. SDL recommends a recent Pentium using ore Duo technology and 2 GB RAM. A mouse or similar pointing device is required. A minimum of.5 GB of hard disk space should be available. -2 ONSITE TRAINING GUIDELINES

3 Platforms SDL Trados Studio 2009 runs under Windows 7, Windows Vista 32/64-bit (all editions) and Windows XP (Home and Professional). Earlier operating system generations such as Windows NT, Windows 2000 and Windows 98 are not supported. Your display settings should be set to at least 256 colors and 024 x 768 pixels. This can be defined in Start > Settings > ontrol Panel > Display > Settings. Language Support In general, language support in SDL Trados Studio 2009 corresponds to the language support installed on your system. For more information about specific support for bi-directional, Asian/DBS (Double Byte haracter Set) and complex script languages in SDL Trados Studio 2009, see the relevant online help. If you use the Freelance version of SDL Trados Studio 2009, be sure to select at least one Western language (such as English, French or German) as one of the five languages you want to work with to ensure correct operation of SDL Trados Studio 2009 after installation. Software SDL Trados Studio 2009 supports the Microsoft Office 2007 formats DOX (Microsoft Word 2007), PPTX (Microsoft PowerPoint 2007) and XLSX (Microsoft Excel 2007). Microsoft Office 2003, XP (2002) and Microsoft Word 2000 continue to be supported. SDL Trados Studio 2009 supports Adobe FrameMaker 8/9 (MIF) and Adobe InDesign S2/S3/S4 (INX and IDML). QuarkXPress 7 is supported through the third-party plug-in opyflow by Napsys. Note that currently the following formats need to be pre-processed in SDL Trados 2007 as TTX before they can be translated in SDL Trados Studio 2009: SGML, PageMaker, Interleaf/QuickSilver Microsoft Internet Explorer 6 or higher is required to use the HTML-based help systems that ship with SDL Trados Studio If you do not already have Internet Explorer 6 (or higher), you can download it from the Microsoft website. ONSITE TRAINING GUIDELINES -3

4 System Requirements for SDL MultiTerm 2009 Hardware The minimum specification to run any of the MultiTerm components is a P with a 500 Mhz Pentium or higher compatible processor. GB RAM is required in addition to the RAM required by the operating system. For optimum performance of the client components, SDL recommends a recent Pentium using ore Duo technology and 2 GB RAM. A mouse or similar pointing device is required. 300 MB of disk space is required for the software and additional space is required for storing termbase data. Platforms SDL MultiTerm 2009 components runs under Windows 7 / Windows Vista 32/64-bit (all editions) and Windows XP (Home and Professional). Earlier operating system generations such as Windows 2000, Windows NT and Windows 98 are not supported. SDL recommends that you remove support for any non-western languages you do not work with from the Microsoft Office Language Settings and that you only use the languages that you translate into and from in Microsoft Word. For more information, please see the Microsoft Word online Help system. Your display settings should be set to at least 256 colors and 024 x 768 pixels This can be defined in Start > Settings > ontrol Panel > Display > Settings. Language Support In general, language support in SDL MultiTerm 2009 corresponds to the language support installed on your system. For more information about specific support for bi-directional, Asian/DBS (Double Byte haracter Set) and complex script languages in SDL MultiTerm 2009, please see the relevant online Help. -4 ONSITE TRAINING GUIDELINES

5 Software SDL MultiTerm 2009 requires the Microsoft.Net Framework version 3.5 SP. This is included in the installation file for your convenience. SDL MultiTerm 2009 requires the Java runtime engine (JRE) version This is included in the installation file for your convenience. SDL MultiTerm onvert requires Microsoft Excel 2002 (XP) or 2003 for direct conversion of XLS files to MultiTerm XML. SDL MultiTerm 2009 supports direct integration with Microsoft Word through the multiterm8.dot and the multiterm8.dotm files. This feature requires Microsoft Word 2003 (SP2) or 2007 to be installed on the computer. SDL MultiTerm Extract requires Microsoft PowerPoint 2000 or higher, Microsoft Excel 2002 or higher for the direct extraction of terms from Microsoft PowerPoint and Microsoft Excel files. SDL MultiTerm Extract requires Microsoft Word 2000 or higher for optimal processing of Word or RTF-based files. Software Installation The installers for SDL Trados 2007, SDL Trados Studio 2009 and SDL MultiTerm 2009 can be downloaded from the SDL ustomer enter at: When you purchase SDL Trados Studio 2009 software, you will receive an listing the items that you have purchased. This also contains the URL for the SDL product licensing website. Your login details for the website are sent to you in a separate when your account is created. ONSITE TRAINING GUIDELINES -5

6 Download the Software Installer. lick the URL in the you received from SDL, or enter the licensing website URL into your browser. 2. The ustomer enter opens on the Login page. 3. Enter your user name and password. 4. lick Login. 5. If you have more than one account the Account Selection page is displayed. 6. lick a Use this account button to display the Account Summary page for the selected account. 7. The Account Summary page will be displayed. -6 ONSITE TRAINING GUIDELINES

7 ONSITE TRAINING GUIDELINES -7

8 8. This page contains links to the different areas of the ustomer enter: My Orders: displays your order history and invoices. My Licenses: contains your active license files or activation codes. My Downloads: contains your software installation downloads. My Quotes: displays your quote history. My Support: displays your support contract information. 9. lick the My Downloads link. 0. The My Downloads page will appear and display the software installation files that are available in your account.. lick the Latest Updates link to view the latest version of the software installation files. 2. The installation files will appear with a Download button available to begin the download process. -8 ONSITE TRAINING GUIDELINES

9 3. lick the Download button. 4. hoose the location of the file and begin the download process. 5. When the download is complete, the installation file may be used to install the software. Install the software. Double click the installation file to start the installation of the software. 2. The installation wizard will bring you through each step of the installation process. 3. Follow the instructions to install the software on each training machine. If you have not purchased the software or you do not have an installer available in your account, please contact the SDL Training Department at ONSITE TRAINING GUIDELINES -9

10 Training Licenses The software must be fully licensed for use during the training session. If you have licenses available, you can use them to license the software that has been installed on the training machines. If you do not have licenses available, you can contact the SDL Training Department, who will send training licenses to you. If the training machine has online access, you may request an activation code. If the training machine does not have online access, you may request a node locked softkey license. License using an Activation ode The SDL Product Activation wizard is displayed automatically when you are installing the software. It is also displayed automatically whenever you open a product that has not been activated. This is the opening page of the SDL Product Activation wizard:. lick to activate the option I have purchased a license. Show me how to activate the product. 2. lick Next to continue. 3. The Select Activation Method page is displayed. 4. lick to select the option Activate your product online. 5. lick Next to continue. 6. The Enter Activation ode page is displayed. -0 ONSITE TRAINING GUIDELINES

11 7. Type to enter the activation code that you received from the SDL Training Department. 8. If you use a proxy server to access the Internet, click Advanced. 9. The Advanced Settings dialog box is displayed. 0. Enter the proxy server details and your username and password for the server.. lick OK to close the dialog box. 2. lick Next. 3. The wizard connects to the SDL website to validate the code: F If the product was activated successfully, click Finish to exit the wizard. If product activation failed because you entered the wrong code, click Back to return to a previous page. Update the activation code and click Next. WARNING If the activation fails for some other reason, contact the SDL Training Department for support. ONSITE TRAINING GUIDELINES -

12 License using a License File To generate the evaluation license file, you must send the Host ID of each training machine to the SDL Training Department. The Host ID can be generated using the Host ID Generator. Download the Host ID Generator. Browse to the SDL ustomer enter at: into your browser. 2. The ustomer enter opens on the Login page. 3. Enter your user name and password. 4. lick Login. 5. If you have more than one account the Account Selection page is displayed. 6. lick a Use this account button to display the Account Summary page for the selected account. 7. The Account Summary page will be displayed. 8. lick the My Licenses link. 9. The My Licenses page will appear and display the software licenses that are available in your account. 0. lick the required product, then select Softkey Licenses, and finally click the Generate License File link.. The Generate License File page will be displayed. 2. lick the download the Host ID generator link. 3. hoose the location of the file and begin the download process. 4. When the download is complete, the installation file may be used to install the software. -2 ONSITE TRAINING GUIDELINES

13 Generate the Host ID. Unzip the files from the zip file HostIDGen.zip. 2. Double click the file HostIdGenerator.exe. 3. The Trados FLEXlm Host ID Generator dialog box will appear. 4. lick Generate. 5. The Host ID will appear in the Host ID text field. 6. lick opy to lipboard to copy the detail to the clipboard. 7. Paste the ID into an or a file. ONSITE TRAINING GUIDELINES -3

14 8. Repeat this process for each training machine. E TIP To facilitate the process, we recommend that you type the name of the training machine beside the Host ID. The training license that is generated will have the name of the machine in the name to associate each file with the machine it will license. 9. the Host ID information to the SDL Training Department. 0. The SDL Training Department will generate the evaluation license files and send these to you via .. The license files can be used during the installation process to license the software. Activate the License File During installation, the SDL Product Activation wizard will appear.. lick to activate the option I have purchased a license. Show me how to activate the product. 2. lick Next to continue. 3. The Select Activation Method page is displayed. 4. lick to select the option Use a local license file. 5. lick Next to continue. -4 ONSITE TRAINING GUIDELINES

15 6. The Select License File page is displayed. 7. lick Browse and navigate to the folder containing the (*.lic) license file that you received from the SDL Training Department. 8. When you have selected the folder, check that the correct details appear in the Select license file box and then click Next. ONSITE TRAINING GUIDELINES -5

16 9. If the product was activated successfully, click Finish to exit the wizard. 0. If product activation failed, click Back to return to a previous page. orrect the folder details you specified and then click Next to continue. F WARNING If the license file fails for some other reason, contact the SDL Training Department for support. ompanion Software If the training outline includes training for any of the following applications or file formats, the client is responsible for installing the software on the training machines: Microsoft Office Adobe FrameMaker QuickSilver Interleaf Adobe InDesign Adobe PageMaker QuarkXPress Training Material In advance of the training session, the following will be avaiable in your My Account area: The training manual in PDF format. The training sample files. A copy of the sample files should be placed on the desktop of each of the training machines. Please ensure that the files are copied in the same folder structure as they are delivered. Parallel Installation of SDL Trados Studio 2009 and SDL Trados 2007 SDL Trados Studio 2009 can run while SDL Trados 2007 is installed on the same P. It is even recommended that you have both versions running on the same computer. Parallel Installation of SDL MultiTerm 2009 and Previous Versions It is recommended that you uninstall any previous SDL MultiTerm versions. You may leave SDL MultiTerm 2007 Desktop installed. This is only recommended when are required to work with SDL MultiTerm 2007 Server or SDL MultiTerm 2007 Team. The uninstall procedure creates a backup of your termbases. -6 ONSITE TRAINING GUIDELINES