A modular system that may be customized for orthognathic procedures Original Instruments and Implants of the Association for the Study of Internal Fixation AO ASIF
Orthognathic Modular Fixation System Create a custom system Orthognathic Graphic Case 2 Module [690.010] 4 Module [690.603] The Graphic Cases will accommodate either the Standard Screwdriver Instrument Tray or the Ratcheting Screwdriver Instrument Tray and two or four modules (ordered separately). Instrument Trays Choice of Standard Screwdriver or Ratcheting Screwdriver Instrument Tray provides additional system flexibility. Standard Screwdriver Instrument Tray [690.011] Ratcheting Screwdriver Instrument Tray [690.015] Non-specific instrument tray areas (without part numbers) allow flexibility in instrument selection.
Orthognathic Plate Module [304.711] Orthognathic Plate Module is designed with generic compartments to accommodate a large variety of plates. Autoclavable adhesive labels provide compartment identification. Orthognathic Screw Module [304.710] Orthognathic Pre-ent Plate Module [304.712] Orthognathic Screw Module houses screws from 1.3 mm to 2.4 mm in diameter Orthognathic Pre-ent Plate Module has etched compartments for the pre-bent plates and generic compartments to accommodate a variety of other plates White screw length marker denotes self-drilling screws lack screw length marker denotes self-tapping screws 1
Graphic Case and Instrument Trays The Orthognathic Instrument Trays are designed to hold a variety of Synthes instruments. The sample instrument selections* are based on a 1.5 mm/2.0 mm system with 2.4 mm position screws. Standard Screwdriver Instrument Tray [690.011] Orthognathic Graphic Case 2 Module [690.010] 4 Module [690.603] The Graphic Cases will accommodate either the Standard Screwdriver Instrument Tray or the Ratcheting Screwdriver Instrument Tray and two or four modules (ordered separately). Ratcheting Screwdriver Instrument Tray [690.015] The Standard Screwdriver and Ratcheting Screwdriver Instrument Trays are each designed to accommodate: 2 Trocar Systems choose one Trocar System: Universal Trocar System 397.211 Universal Trocar Handle 397.232 Malleable C-Retractor 2.4 mm Accessories OR 397.212 Cannula and Obturator 397.262 1.8 mm Drill Guide 397.23 Cheek Retractor Ring 397.22 Cheek Retractor lade Plate Holding Trocar System 397.310 Trocar Handle 397.312 2.0 mm Plate Holder 397.313 Cheek Retractor lade 397.317 Removable Metal Point 397.325 1.5 mm Drill Guide Drill its, Stryker J-latch (tray will hold two of each, or other comparably sized drill bits)** 310.512 1.8 mm, 100 mm* 317.335 1.1 mm, 110 mm* 317.835 1.5 mm, 110 mm* 2.0 mm Accessories 397.213 Cannula and Obturator 397.216 1.5 mm Drill Guide 397.43 Cheek Retractor Ring 397.42 Cheek Retractor lade * Shown in sample set configuration photos ** Additional instruments available, see SYNTHES Maxillofacial catalog. Trocar Drill its, quick coupling (tray will hold two of each) 317.875 1.5 mm, with 6 mm stop, 100 mm* 317.876 1.5 mm, 100 mm, 8 18 mm calibration* 317.877 1.8 mm, with 6 mm stop, 100 mm* 317.878 1.8 mm, 100 mm, 8 18 mm calibration* Depth Gauge 319.007 Depth Gauge for 2.0 mm and 2.4 mm screws, long* Plate Holding Forceps (tray will hold three) 347.98 For 1.0 mm 2.4 mm plates* 348.98 Locking, for 1.0 mm and 1.3 mm plates* 399.001 Locking, for 1.5 mm and 2.0 mm plates* Double Drill Sleeves (tray will hold two) 312.14.96 1.5 mm/1.1 mm* 312.18 2.4 mm/1.8 mm* 319.134 1.3 mm/1.0 mm enders and Cutters (tray will hold three)** 347.964 Combination ending Pliers, for 1.0 mm 2.0 mm plates* 391.965 Combination ending/cutting Pliers, for 1.0 mm 2.0 mm plates* 329.14 Universal ending Pliers, for 1.0 mm 2.0 mm plates (two required) 391.98 Plate Cutter, for 1.0 mm 2.0 mm plates*
Standard Screwdriver Instrument Tray [690.011] INSTRUMENT TRAYS Note: Contents not included, must be ordered separately. The Standard Screwdriver Instrument Tray will also accommodate: Handles 311.43 Handle with quick coupling* 311.01.98 Handle with mini quick coupling, large (holds two)* Cruciform Screwdrivers (tray will hold two) 313.925 2.4 mm, self retaining* 313.94 2.4 mm, with Holding Sleeve* 313.95 1.5 mm/2.0 mm 313.96 2.4 mm Cruciform Screwdriver lades, with holding sleeve, mini quick coupling 314.411 1.3 mm, (holds two)* 314.67 1.5 mm/2.0 mm, short (holds two in auxiliary bin) 314.68 1.5 mm/2.0 mm, long (holds two in auxiliary bin) Cruciform Screwdriver lades, self-retaining, wedge, mini quick coupling (tray will hold two each of two different blades) 313.916 1.3 mm 313.922 1.5 mm/2.0 mm, short* 313.923 1.5 mm/2.0 mm, long* StarDrive Screwdriver lades, self-retaining, mini quick coupling (tray will hold two each of two different blades) 313.822 1.3 mm, short 313.821 1.3 mm, medium 313.832 1.5 mm, short* 313.851 1.5 mm, medium 313.833 1.5 mm, long* 313.842 2.0 mm, short* 313.854 2.0 mm, medium 313.843 2.0 mm, long* Taps, mini quick coupling 311.120 For 1.3 mm Cortex Screws 311.15 For 1.5 mm Cortex Screws 311.19 For 2.0 mm Cortex Screws* 311.206 For 2.0 mm Coarse Pitch Screws 311.21.98 For 2.0 mm Cortex Screws, long Taps, quick coupling 311.23 For 2.4 mm Cortex Screws* 311.24 For 2.4 mm Cortex Screws, long Countersinks, with centering pins, quick coupling 310.80 For 2.4 mm Cortex Screws* 310.81 For 1.5 mm, 2.0 mm, and 2.7 mm screws* * Shown in sample set configuration photos 3
Ratcheting Screwdriver Instrument Tray [690.015] Note: Contents not included, must be ordered separately. The Ratcheting Screwdriver Instrument Tray will also accommodate: 311.014 Ratcheting Screwdriver ody (requires 311.016 or 311.017, holds two)* Handles 311.016 Small, for Ratcheting Screwdriver ody* 311.017 Large, for Ratcheting Screwdriver ody* Cruciform Screwdriver lades, self-retaining, hex coupling (tray will hold three each of three different blades) 313.917 1.3 mm 313.935 1.5 mm/2.0 mm, short 313.936 1.5 mm/2.0 mm, long 313.928 2.0 mm/2.4 mm* Cruciform Screwdriver lade, hex coupling 313.939 2.4 mm/3.0 mm* 313.97 Holding Sleeve for 313.939* StarDrive Screwdriver lades, self-retaining, hex coupling (tray will hold two each of four different blades) 313.827 1.3 mm, short 313.825 1.3 mm, medium 313.837 1.5 mm, short* 313.852 1.5 mm, medium 313.838 1.5 mm, long* 313.847 2.0 mm, short* 313.855 2.0 mm, medium 313.848 2.0 mm, long* Taps, hex coupling 311.209 For 2.0 mm Coarse Pitch screws 311.211 For 2.0 mm Cortex screws* 311.241 For 2.4 mm Cortex screws* 310.883 Countersink for 2.0 mm and 2.4 mm screws, hex coupling* * Shown in sample set configuration photos 4
Orthognathic Screw Module [304.710] The Orthognathic Screw Module is designed to hold a variety of Synthes Maxillofacial screws. Module 304.710 Orthognathic Screw Module Includes: 304.710S1 Label Sheet for Orthognathic Screw Module (two each) Optional Contents Screw Length Marker Kits see SYNTHES Maxillofacial catalog for complete line of Screw Length Marker Kits 1.3 mm Titanium Cortex Screws, self-drilling, 400.124 400.126 4 mm 6 mm (1 mm increments) 1.3 mm 2.0 /2.4 mm SCREW MODULE 1.3 mm Titanium Cortex Screws, self-tapping, 400.333 400.342 3 mm 12 mm (1 mm increments) 400.344 400.348 14 mm 18 mm (2 mm increments) 1.3 mm Titanium Cortex Screws, self-tapping, 400.623 400.632 3 mm 12 mm (1 mm increments) 400.634 400.638 14 mm 18 mm (2 mm increments) 1.7 mm Emergency Screws, 400.143 400.152 3 mm 12 mm (1 mm increments) 400.154 400.158 14 mm 18 mm (2 mm increments) 1.7 mm Titanium Emergency Screws, 400.653 400.662 3 mm 12 mm (1 mm increments) 400.664 400.668 14 mm 18 mm (2 mm increments) 1.5 mm Titanium Cortex Screws, self-drilling, 400.754 400.758 4 mm 8 mm (1 mm increments) 1.5 mm Titanium Cortex Screws, self-tapping 400.354 400.362 4 mm 12 mm (1 mm increments) 400.364 400.368 14 mm 18 mm (2 mm increments) 1.5 mm Titanium Cortex Screws, self-tapping, 400.734 400.742 4 mm 12 mm (1 mm increments) 400.744 400.748 14 mm 18 mm (2 mm increments) 2.0 mm Titanium Emergency Screws, 400.254 400.262 4 mm 12 mm (1 mm increments) 400.264 400.268 14 mm 16 mm (2 mm increments) 2.0 mm Titanium Emergency Screws, 400.784 400.792 4 mm 12 mm (1 mm increments) 400.794 400.798 14 mm 18 mm (2 mm increments) 2.0 mm Titanium Cortex Screws, self-drilling, 401.134 401.138 4 mm 8 mm (1 mm increments) 2.0 mm Titanium Cortex Screws, self-tapping, 401.354 401.362 4 mm 12 mm (1 mm increments) 401.364 401.368 14 mm 18 mm (2 mm increments) 1.5 mm 2.0 mm Note: Contents not included, must be ordered separately. 2.0 mm Titanium Cortex Screws, self-tapping, 401.154 401.162 4 mm 12 mm (1 mm increments) 401.164 401.168 14 mm 18 mm (2 mm increments) 2.4 mm Titanium Emergency Screws, 401.386 401.392 6 mm 12 mm (1 mm increments) 401.394 401.398 14 mm 18 mm (2 mm increments) 2.4 mm Titanium Emergency Screws, 401.306 401.312 6 mm 12 mm (1 mm increments) 401.314 401.318 14 18 mm (2 mm increments) 2.4 mm Titanium Cortex Screws, self-tapping, 401.506 401.518 6 mm 18 mm (2 mm increments) 2.7 mm Titanium Emergency Screws, 401.558 401.568 8 mm 18 mm (2 mm increments) 2.0 mm Titanium Cortex Screws, coarse pitch, self-tapping, 401.934 401.942 4 mm 12 mm (1 mm increments) 401.944 401.948 14 mm 18 mm (2 mm increments) 1.0 mm Drill it, Stryker J-latch, with stop* 316.446 316.448 4 mm 8 mm (2 mm increments) 1.1 mm Drill it, Stryker J-latch, with stop* 317.14 317.18 4 mm 8 mm (2 mm increments) 317.22 12 mm 1.5 mm Drill it, Stryker J-latch, with stop* 317.64 317.68 4 mm 8 mm (2 mm increments) 317.72 12 mm * Additional instruments available, see SYNTHES Maxillofacial catalog. 5
Orthognathic Plate Module [304.711] The Orthognathic Plate Module is designed with compartments to hold a variety of Synthes Maxillofacial plates. The sample plate configurations are based on a 1.5 mm/2.0 mm system with 2.4 mm position screws. Module 304.711 Orthognathic Plate Module Includes: 304.711S1 Label Sheet for Orthognathic Plate Module (2 each) Optional Contents Plate Selection Compartment Options** Titanium Oblique L-Plates 421.050 1.3 mm, 3 x 3 holes, left A,, C, F 421.051 1.3 mm, 3 x 3 holes, right A,, C, F 421.052 1.3 mm, 3 x 4 holes, left A,, C, F 421.053 1.3 mm, 3 x 4 holes, right A,, C, F 446.50 1.5 mm, 2 x 3 holes, left * A,, C, F 446.51 1.5 mm, 2 x 3 holes, right* A,, C, F 446.52 1.5 mm, 3 x 4 holes, left*, C, F 446.53 1.5 mm, 3 x 4 holes, right*, C, F 446.792 1.5 mm, 2 x 2 holes, short, right* A,, C, F 446.793 1.5 mm, 2 x 2 holes, short, left* A,, C, F 446.794 1.5 mm, 2 x 2 holes, long, right* A,, C, F 446.795 1.5 mm, 2 x 2 holes, long, left* A,, C, F 447.50 2.0 mm, 2 x 3 holes, left*, C, F 447.51 2.0 mm, 2 x 3 holes, right*, C, F 447.52 2.0 mm, 3 x 4 holes, left* C, F 447.53 2.0 mm, 3 x 4 holes, right* C, F 447.54 2.0 mm, 4 x 6 holes, left L 447.55 2.0 mm, 4 x 6 holes, right L 447.556 2.0 mm, 2 x 2 holes, short, right* A,, C, F 447.557 2.0 mm, 2 x 2 holes, short, left* A,, C, F 447.558 2.0 mm, 2 x 2 holes, long, right* A,, C, F 447.559 2.0 mm, 2 x 2 holes, long, left* A,, C, F Titanium Oblique L-Plates, malleable 446.515 1.5 mm, 2 x 3 holes, right* A,, C, F 446.516 1.5 mm, 2 x 3 holes, left* A,, C, F 446.527 1.5 mm, 3 x 4 holes, left, C, F 446.537 1.5 mm, 3 x 4 holes, right, C, F 446.782 1.5 mm, 2 x 2 holes, short, right A,, C, F 446.783 1.5 mm, 2 x 2 holes, short, left A,, C, F 446.784 1.5 mm, 2 x 2 holes, long, right* A,, C, F 446.785 1.5 mm, 2 x 2 holes, long, left* A,, C, F 447.515 2.0 mm, 2 x 3 holes, right*, C, F 447.516 2.0 mm, 2 x 3 holes, left*, C, F 447.527 2.0 mm, 3 x 4 holes, left C, F 447.537 2.0 mm, 3 x 4 holes, right C, F 447.546 2.0 mm, 2 x 2 holes, short, right A,, C, F 447.547 2.0 mm, 2 x 2 holes, short, left A,, C, F 447.548 2.0 mm, 2 x 2 holes, long, right* A,, C, F 447.549 2.0 mm, 2 x 2 holes, long, left* A,, C, F Note: Contents not included, must be ordered separately. Plate Selection Titanium Maxillary L-Plates Compartment Options** 446.504 1.5 mm, 3 x 3 holes, 22 mm, right A,, C, F 446.505 1.5 mm, 3 x 3 holes, 22 mm, left A,, C, F 446.506 1.5 mm, 3 x 3 holes, 24 mm, right, C, F 446.507 1.5 mm, 3 x 3 holes, 24 mm, left, C, F 446.508 1.5 mm, 3 x 3 holes, 26 mm, right, C, F 446.509 1.5 mm, 3 x 3 holes, 26 mm, left, C, F 447.040 2.0 mm, 3 x 3 holes, 25 mm, right, C, F 447.041 2.0 mm, 3 x 3 holes, 25 mm, left, C, F 447.042 2.0 mm, 3 x 3 holes, 27 mm, right, C, F 447.043 2.0 mm, 3 x 3 holes, 27 mm, left, C, F 447.044 2.0 mm, 3 x 3 holes, 29 mm, right C, F 447.045 2.0 mm, 3 x 3 holes, 29 mm, left C, F 6 * Shown in sample set configuration photos ** Colored text indicates compartment location of featured product
Orthognathic Plate Module [304.711] (continued) E E E E G G K F F F F L H I PLATE MODULE F F F F J J J J A C C A D D D D A C C A D D D D Optional Contents (continued) Plate Selection Compartment Options** Plate Selection Compartment Options** 2.0 mm Titanium Chin Plates 447.070 Straight, 4 holes, 3 mm offset E, F 447.071 Straight, 4 holes, 5 mm offset E, F 447.072 Straight, 4 holes, 8 mm offset E, F 447.073 Double end, 5 holes, 4 mm offset* E, F 447.074 Double end, 5 holes, 6 mm offset* E, F 447.075 Double end, 5 holes, 8 mm offset* E, F 447.076 Double end, 5 holes, 10 mm offset* E, F 447.077 Single end, 5 holes, 3 mm 5 mm offset E, F 447.078 Single end, 5 holes, 6 mm 8 mm offset E, F 447.079 Single end, 5 holes, 9 mm 11 mm offset E, F 447.146 Double end, 4 holes, 6 mm offset, right E, F 447.147 Double end, 4 holes, 6 mm offset, left E, F 447.148 Double end, 4 holes, 8 mm offset, right E, F 447.149 Double end, 4 holes, 8 mm offset, left E, F 447.150 Double end, 4 holes, 10 mm offset, right E, F 447.151 Double end, 4 holes, 10 mm offset, left E, F 2.0 mm Titanium Sagittal Split Plates 447.030 Curved, 6 holes, 14 mm bar G, H 447.033 Curved, low profile, 6 holes, 4 mm bar* G, H, I, J 447.034 Curved, low profile, 6 holes, 8 mm bar* G, H, I, J 447.035 Curved, 6 holes, 4 mm bar G, H, I, J 447.036 Curved, 6 holes, 12 mm bar G, H, I, J 447.037 Curved, low profile, 6 holes, 12 mm bar* G, H, I, J 447.038 Curved, 6 holes, 8 mm bar G, H, I, J 447.039 Curved, 6 holes, 16 mm bar G, H 447.082 Strut, 8 holes* G, H, I, J 447.083 Curved, 10 holes, 38 mm G, H 447.084 Straight, 4 holes, 30 mm* G, H, I, J 447.114 With adjustable slider, 33 mm* G, H, I, J 447.116 With adjustable slider, 40 mm* G, H * Shown in sample set configuration photos ** Colored text indicates compartment location of featured product 7
Orthognathic Plate Module [304.711] (continued) Optional Contents (continued) Plate Selection Compartment Options** Titanium Adaption Plates 421.010 1.3 mm, 24 holes, 95 mm K 446.10 1.5 mm, 20 holes, 90 mm* K 446.101 1.5 mm, 20 holes, 90 mm, low profile K 447.10 2.0 mm, 20 holes, 100 mm K Titanium Adaption Plates, malleable 450.101 1.5 mm, 20 holes, 90 mm K 451.101 2.0 mm, 20 holes, 100 mm K Titanium T-Plates 421.071 1.3 mm, 3 x 4 holes F 446.090 1.5 mm, 4 x 7 holes* G 446.091 1.5 mm, 4 x 7 holes, malleable G Titanium Y-Plates 421.061 1.3 mm, 1 x 3 holes F 446.61 1.5 mm, 1 x 3 holes F 446.611 1.5 mm, 1 x 3 holes, low profile F 447.61 2.0 mm, 1 x 3 holes F 447.62 2.0 mm, 2 x 4 holes F Plate Selection Titanium Z-Plates Compartment Options** 446.796 1.5 mm, short, right* D, F 446.797 1.5 mm, short, left* D, F 446.798 1.5 mm, long, right* D, F 446.799 1.5 mm, long, left* D, F 447.562 2.0 mm, short, right* D, F 447.563 2.0 mm, short, left* D, F 447.564 2.0 mm, long, right* D, F 447.565 2.0 mm, long, left* D, F Titanium Z-Plates, malleable 446.786 1.5 mm, short, right D, F 446.787 1.5 mm, short, left D, F 446.788 1.5 mm, long, right D, F 446.789 1.5 mm, long, left D, F 447.572 2.0 mm, short, right D, F 447.573 2.0 mm, short, left D, F 447.574 2.0 mm, long, right D, F 447.575 2.0 mm, long, left D, F Titanium Y-Plates Plates, malleable 450.611 1.5 mm, 1 x 3 holes, F 451.611 2.0 mm, 1 x 3 holes, F Orthognathic Pre-ent Plate Module [304.712] 1.5 mm Titanium Pre-ent Maxillary Plates (can be stored in the Orthognathic Plate Module for Titanium Pre-ent Plates [304.712] or in the Auxiliary in of the Orthognathic Plate Module [304.711] 446.042 3 mm advancement, right L 446.043 3 mm advancement, left L 446.044 5 mm advancement, right L 446.045 5 mm advancement, left L 446.046 7 mm advancement, right L 446.047 7 mm advancement, left L 446.048 9 mm advancement, right L 446.049 9 mm advancement, left L 446.060 11 mm advancement, right L 446.061 11 mm advancement, left L Orthognathic Pre-ent Plate Module has etched compartments for the pre-bent plates and generic compartments to accommodate a variety of other plates 8 * Shown in sample set configuration photos ** Colored text indicates compartment location of featured product
Sample Configuration Standard Screwdriver Instrument Tray [690.011] GRAPHIC CASE AND MODULES Orthognathic Graphic Case [690.010] Orthognathic Screw Module [304.710] Orthognathic Plate Module [304.711] 9
SYNTHES Maxillofacial 1690 Russell Road Paoli, PA 19301-1262 Telephone: (610) 647-9700 Fax: (610) 251-9056 To order: (800) 523-0322 SYNTHES (CANADA) LTD. 2566 Meadowpine oulevard Mississauga, Ontario L5N 6P9 Telephone: (905) 567-0440 Fax: (905) 567-3185 To order: (800) 668-1119 SYNTHES Maxillofacial 2000 SYNTHES and ASIF are registered trademarks of SYNTHES (USA) and SYNTHES AG Chur. Printed in U.S.A. GP1431-E 10/03 J2962-E