SPECIAL APPLICATION MICROMETERS

SPECIAL APPLICATION MICROMETERS RELIABLE, REPEATABLE, AND DURABLE COOLANT PROOF MICROMETERS Rated IP65, for use in harsh shop environments Ratchet stop SPC data output With standard bar (except 0-1 /0-25mm models) Range Order No. Resolution SALE CALIBRATION 0-25mm 293-234-30* 0.001mm $ 284.28 $39.00 0-1"/0-25.4mm 293-330-30 $ 262.20 293-332-30 $ 384.56 2-3"/ 0-50.8-76.2mm 3-4"/ 76.2-101.6mm 4-5"/ 101.6-127.0mm 5-6" 127.0-152.4mm Remarks *Ratchet thimble 293-333-30 293-234-30.00005 / 0.001mm $ 414.92 293-350-30.0001"/ 0.001mm $ 513.36 293-351-30 $ 531.76 Optional Accessories 05CZA662 SPC Cable 40 /1m $100.00 05CZA663 SPC Cable 80 /2m $147.80 UNI-MIKE WITH INTERCHANGEABLE ANVILS $64.00 Measures tube thickness, shoulder-edge distance, rivet head height, etc. Supplied with interchangeable flat and rod anvils V-anvil and special disk anvils are optional Range Order No. Grad. SALE CALIBRATION 0-1" 117-107.0001" $ 230.00 $39.00 OUTSIDE MICROMETERS - TAPERED Satin-chrome-finished frame Tapered (on the anvil side) for hard-to-reach places. Range Order No. Type Grad. SALE CALIBRATION 0-1" 101-113 Ratchet $ 141.68.0001" $39.00 0-1" 101-117 Friction $ 147.20 OUTSIDE MICROMETERS FALL FLYER Jul 1 -Sep 30, 2016 Ratchet stop Hammerton, baked-enamel finish Supplied with a standard bar (except 0-1 /0-25mm models) Range Order No. Graduation SALE CALIBRATION 0-25mm 103-129 0.001mm $ 130.64 0-1" 103-131.0001" $ 130.64 $39.00 1-2" 103-178 $ 110.20.001" 2-3" 103-179 $ 136.80 $64.00 SPHERICAL FACE MICROMETERS 115-153 S-F Designed to measure the wall thickness of various tubing Ratchet stop DISK MICROMETERS Diameter of measuring disk.787 /20mm Edge thickness.028 /0.7mm to enter narrow recesses Ratchet stop Range Order No. Grad. SALE CALIBRATION 0-1" 123-125.001" $ 269.56 $39.00 0-25mm 123-101 0.01mm $ 269.56 115-253 S-S Range Order No. Grad. SALE CALIBRATION 0-1" 115-153 S-F.0001" $ 148.12 0-25mm 115-115 S-F 0.01mm $ 148.12 $39.00 0-1" 115-253 S-S.0001" $ 161.00 S-F Remarks: Spherical anvil, flat spindle S-S Spherical anvil, spherical spindle 2

PRECISION IS OUR PROFESSION MITUTOYO OFFERS OVER 6,000 PRECISION MEASURING PRODUCTS FALL FLYER Oct 1 - Dec 20, 2016 SCREW THREAD MICROMETERS Interchangeable anvil-spindle tip type Optional 60 o or 55 o V-anvil and 126-137 conical spindle (interchangeable) Ratchet stop With standard bar (except 0-1 /0-25mm models) Range Order No. Grad. SALE CALIBRATION Micrometer without Anvil-Spindle tip set 0-1" 126-137 $ 494.96.001" $39.00 1-2" 126-138 $ 593.40 Micrometer with 126-800 Anvil-Spindle tip set 0-1" 126-901 $ 1,014.76 1-2" 126-902 $ 1,115.04 $39.00*.001" *Standard cannot be 3-4" 126-904 $ 1,291.68 calibrated 4-5" 126-905 $ 1,368.96 Features: 60 degree V-anvil and conical spindle (interchangeable) are optional (unless specified, which are made of high-grade special steel, hardened and precision ground. Storage box Included Applications Metric Screw, Unified screw (60 threads) Set Order No. 126-800 SALE $418.60 Threads Per Inch Pitch (mm) Tip Information Individual Order No. Individual Price 64-48 (M1) 0.4-0.5 126-801 $73.60 44-28 (M2) 0.6-0.9 126-802 $73.60 24-14 (M3) 1-1.75 126-803 $73.60 13-9 (M4) 2-3 126-804 $73.60 8-5 (M5) 3.5-5 126-805 $73.60 4.5-3.5 (M6) 5.5-7 126-806 $73.60 OUTSIDE MICROMETER - INTERCHANGEABLE ANVILS DEPTH MICROMETERS Ø4mm interchangeable rods provide a wide measuring range. Ratchet stop. Rod length can be adjusted in 1 increments Range Order No. Base Rod Qty. SALE CALIBRATION 0-4" 129-131 4 x.63" 4 $ 225.40 $114.00 0-12" 129-149 2.5 x.63" 12 $ 409.40 $266.00 COMBINATION SQUARE SET Wide measuring range with 6 interchangeable anvils Supplied with 6 zero-setting standard bars Ratchet stop Range Order No. Grad. SALE CALIBRATION 6-12" 104-138.001" $ 694.60 $114.00 RATCHET THIMBLE MICROMETER Smooth action ratchet function works from both the thimble and speeder allowing easy one-handed operation Audible ratchet Thimble sleeve Speeder sleeve Square and centre heads are attached to the steel rule blade for versatile measurements Range Order No. Graduation SALE CALIBRATION 0-1" 102-717.0001" $ 170.20 $39.00 Range Order No. Remarks SALE CALIBRATION 12"/ 4R 180-903B 8, 16,32, 64ths $ 185.84 $114.00 H H Allow 4-6 weeks for Calibration 3

FOLLOW US DEPTH GAUGES LIKE US FALL FLYER Oct 1 - Dec 20, 2016 INSIST ON MITUTOYO PREMIUM QUALITY BUILT INTO EVERY GAUGE Range Order No. Remarks Base and measuring faces for all models below are hardened and micro-lapped Optional wider extension base are available (up to 450mm models) Dial depth gauge with fine adjustment 0-6" 527-311-50 Fast, easy readings Resolution/ Graduation SALE CALIBRATION.001" $ 271.40 $51.00 0-6" 0-150mm 571-211-30 ABSOLUTE sensor technology keeps track of the origin point once set for the entire life of the battery SPC data output $ 438.84 $51.00 0-8" 0-200mm 0-12" 0-300mm Optional Accessories SPC cable 959149 (1m) $61.50 SPC cable 959150 (2m) $69.00 571-262-10 IP67 Coolant Proof models ABSOLUTE sensor technology keeps track of the 571-263-10 origin point once set for the entire life of the battery SPC data output.0005"/0.01mm $ 604.44 $64.00 Optional Accessories SPC cable 05CZA624 (1m) $108.00 SPC cable 05CZA625 (2m) $115.00 0-300mm 527-413 End of main scale is hook shaped to allow depth and thickness measurement of a projected portion or lip in a hole, in addition to standard depth measurement With fine adjustment $ 631.12 $114.00 0.02mm $ 471.04 $114.00 0-40" 527-115 Vernier depth gauge with fine adjustment.001" $ 1,016.60 $90.00 H 4 H Allow 4-6 weeks for Calibration

FALL FLYER Oct 1 - Dec 20, 2016 QUALITY PRODUCTS FROM A BRAND YOU CAN TRUST MITUTOYO PRECISION MEASURING INSTRUMENTS ARE TRUSTED WORLDWIDE DIGIMATIC HEIGHT GAUGE ABSOLUTE encoder eliminates the need to set the reference point at every power on No overspeed errors Carbide tipped scriber Large, smooth slider feed wheel SPC data output Order No. 570-313 0-18 /0-450mm Resolution:.0005 /0.01mm SALE $975.20 CALIBRATION $140.00 Optional Accessories 905338 SPC Cable 40 /1m $46.30 905409 SPC Cable 80 /2m $51.00 ABSOLUTE DIGIMATIC CALIPER - NIB JAWS Rounded faces of the jaws are ideal fo raccurate ID measurement With SPC output VERNIER CALIPERS Range 0-150mm/ 0-6 0-300mm 0-12 0-150mm/ 0-6 0-200mm/ 0-8 530 Series 531 Series Order No. 530-104 530-119 1 Measures OD, ID, depth, steps Dual reading scale Lock screw for holding the sliding jaw position The slider moves only when the spring loaded thumb clamp is depressed Measures OD, ID, depth, steps Graduation Lower/Upper SALE CALIBRATION 0.05mm/ 1/128 $ 83.72 $39.00 $ 256.68 $51.00 0.02mm/ 531-128 1,2 $ 106.72 $39.00.001 531-129 1,2 $ 126.04 $51.00 Remarks: 1 High accuracy model 2 Thumb clamp type Range Order No. Resolution SALE CALIBRATION Optional Accessories 0 (.5) - 24 / 0 (20-600mm) 550-225-10.0005 / 0.01mm $ 1,181.28 $114.00 959149 SPC cable (1m) $61.50 959150 SPC cable (2m) $69.00 ABSOLUTE DIGIMATIC CALIPER DIAL CALIPER WITH CARBIDE-TIPPED JAWS (1) ABSOLUTE Digimatic Caliper with exclusive AOS sensor technology (2) ABSOLUTE Digimatic Caliper with electrostatic capacitance linear encoder Range Order No. Graduation SALE CALIBRATION 0-4 / 0-100mm 500-195-30*(1).0005 / $ 165.30 $39.00 0-12 / 0.01mm 500-193 (2) 0-300mm $ 485.45 $64.00 Remarks: *.075 rod depth bar Ultra-smooth sliding and high shock protection Lock screw for dial bezel and for holding the sliding jaw position Carbide-tipped jaws for OD & ID measurement.1 per one revolution Range Order No. Graduation SALE CALIBRATION 0-6 505-738.001 $ 230.00 $39.00 5

FALL FLYER Oct 1 - Dec 20, 2016 CHOOSE MITUTOYO FOR PRODUCT EXCELLENCE UNPRECEDENTED SUPPORT AND SERVICE SERIES 1 and 2 DIAL INDICATORS - ANSI/AGD TYPE Hard coated crystal for durability and scratch resistance Many optional contact points and back accessories available Lug back ANSI/AGD type, stem 3/8 dia. 1410S-10 Face: 40mm dia. Range Range/ Rev Order No. Graduation Dial SALE CALIBRATION.25.1 1410S-10 1.001 0-100 $ 124.20.5.1 2415S.001 0-50-0 $ 122.36 1.1 2416SB 2.001 0-100 $ 125.12 $39.00 1.1 2417S.001 0-50-0 $ 131.56 2 1 2424S-19 1,3.001 0-100 $ 241.30 Remarks: 1 Jeweled bearings 2 Flat back 3 Shockproof SERIES 2 DIAL INDICATOR - ISO/JIS TYPE Hard coated crystal for durability and scratch resistance Many optional contact points and back accessories available Lug back ISO/JIS type, 8mm dia.stem Shockproof, with jeweled bearings Range Range/ Rev 2416SB Face: 57mm dia. Order No. Graduation Dial SALE CALIBRATION SOLAR DIGIMATIC ID-S INDICATOR ABSOLUTE encoder eliminates the need to set the reference point at every power on which is especially useful in mulitpoint measurement Solar power source - ready for use from 40 lux illumination Simple 3 button design SPC data output As compact as Series 2 dial indicators 3/8 stem dia. (ANSI/AGD) Flat back Order No. 543-507B Range:.5 /12.7mm Resolution:.0005 /0.01mm SALE $215.28 CALIBRATION $39.00 Optional Accessories 905338 SPC Cable 40 /1m $46.30 905409 SPC Cable 80 /2m $51.00 1mm 0.2mm 2109S-10 0.001mm 0-100-0 $ 193.20 $39.00 3-PC BORE GAUGE SET Durable carbide-tipped contact points Range:.7-6 With 2923SB-10 dial Indicator (graduation:.0001 ) Gauge stem 3/8 dia. 26 anvils (2 sub-anvil) included 10 spacers included Order No. 511-932 SALE $1,137.12 CALIBRATION $89.00 MAGNETIC INDICATOR STAND With fine adjustment. ON-OFF switch offers instant mounting and dismounting. Applicable holding stem dia. Ø4mm, 8 Ømm, Ø9.53mm (3/8 ) Order No. 7011S-10 SALE $110.40 6

PRECISION IS OUR PROFESSION MITUTOYO OFFERS OVER 6,000 PRECISION MEASURING PRODUCTS POCKET TYPE DIAL TEST INDICATOR Jeweled bearings assure higher sensitivity and accuracy Reversible measuring direction with fully adjustable bezel/dial face Contact point is adjustable within 220 o Bezel is sealed with O-ring to keep out water/oil Range Order No. Graduation Dial Remarks SALE 0.5mm 513-514T 1 0.01mm 0-25-0 Full set $ 205.16 0.14mm 513-501 0.001mm 0-70-0 Basic set $ 197.80.04 513-518.001 0-20-0 Basic set $ 147.25.02 513-512 1.0005 0-10-0 Basic set $ 192.28.01 513-504T.0001 0-5-0 Full set $ 195.04 CALIBRATION $39.00 Remarks: 1 Long contact point DIAL TEST INDICATORS ABSOLUTE DIGIMATIC ID-S INDICATOR Unlimited response speed SPC Data output ANSI/AGD type, 3/8 stem dia. Flat back Range Order No. Graduation SALE.0001"/.5 /12.7mm 543-793B $ 313.50 0.001mm CALIBRATION $39.00 Optional Accessories 905338 SPC Cable 40 /1m $46.30 905409 SPC Cable 80 /2m $51.00 FALL FLYER Oct 1 - Dec 20, 2016 Choose from horizontal or vertical styles Jeweled bearings, anti-magnetic, Style Range Order No. Graduation Dial Remarks SALE.06 513-442T 1.0005 0-15-0 Full set $ 219.88 Horizontal.06 513-446T 1,2.0005 0-15-0 Full set $ 292.56 20 o tilted face.06 513-446-06 1,2,3.0005 0-15-0 Basic set $ 259.44.016 513-443T 1.0001 0-4-0 Full set $ 277.84 Vertical.03 513-452T.0005 0-15-0 Full set $ 205.16 CALIBRATION $39.00 Remarks: 1 Revolution counter 2 3 Long contact point Black dial face Vertical type Horizontal type 513-442T Full set DIAL TEST INDICATORS - HORIZONTAL TYPE Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access Jeweled bearings, anti-magnetic MINI MAGNETIC STAND FOR TEST INDICATORS Range Order No. Graduation Dial Remarks SALE 0.5mm 513-414E 1,2 0.01mm 0-25-0 $ 178.48 1mm 513-415E 2 0.01mm 0-50-0 $ 154.56.03 513-472*.0005 0-15-0 Basic set $ 160.08.03 513-462 3.0005 0-15-0 $ 205.16.03 / 513-406.0005 / 0-15-0 $ 168.36 0.7mm 513-406T 0.01mm 0-35-0 Full set $ 187.68.008 513-403.0001 0-4-0 Basic set $ 154.85 CALIBRATION $39.00 Remarks: 1 Double scale spacing 2 Long contact point 3 Compact type *provided with Ø2mm ruby contact point instead of carbide 513-472 513-414E 150N magnetic force No ON/OFF switch Applicable holding stem dia. 8 Ømm, Ø6mm Order No. 7014-10 SALE $93.84 7

OUR PRECISION GAUGES ARE ALWAYS ON THE LEADING EDGE PRECISION IS OUR PROFESSION FALL FLYER Oct 1 - Dec 20, 2016 THICKNESS GAUGES Each leaf is marked with its thickness and detachable if necessary Straight blade, 13mm width THICKNESS GAUGE Quick and efficient inspection with convenient grip handle, thumb trigger and spring-loaded spindle Flat anvil type Ceramic spindle/anvil Graduation.001 Range Order No. Blade Length Leaves SALE 0.03-0.5mm 184-302S 150mm 13 $ 52.44 0.05-1mm 184-305S 100mm 13 $ 57.96 0.05-1mm 184-313S 100mm 28 $ 75.05 Range Order No. SALE CALIBRATION 0 -.5" 7300S $ 147.20 $51.00 8 SPRING CALIPER Contact ends are fully rounded to give accurate dimensions Range: 6 /150mm Order No. 950-222 SALE $42.75 STEEL RULES Clear graduations on satin chrome finish Stainless tempered DIAL CALIPER GAUGES Spring loaded and makes point contact at constant pressure. Use with a setting ring or micrometer. Graduation:.001 Order No. 209-116 Range:.4-1.4 SALE $353.28 Order No. 209-117 Range: 1.2-2.2 SALE $402.04 182-125 SCRIBERS Tungsten-carbide-tipped Order No.985-101 Length: 6.75 SALE $30.36 Order No.985-102 Length: 6.12 SALE $20.24 182-206 Order No. 950-300 SALE $11.40 Range Order No. Graduations Width SALE CALIBRATION 12 x 300mm 182-125 Wide Rigid Rule - Thickness 3/64 1/32, 1/64, 1mm, 0.5mm 1 $ 11.40 $101.00 6" (4R) 182-201 1/8, 1/16, 1/32, 1/64 $ 16.15 6" (5R) 182-203 1/32, 1/64, 1/10, 1/100 $ 16.15 1/2 6 x 150mm 182-206 Full-Flexible Rule - Thickness 1/64 1/50, 1/100, 1mm, 0.5mm $ 16.15 $51.00 6 x 150mm 182-208 1/10, 1/50, 1mm. 0.5mm $ 23.75 150mm 182-211 1mm, 0.5mm, 1mm, 0.5mm 12mm $ 24.70 985-101 985-102 POCKET STEEL RULE Engraved on front side only Backside: Inch/metric equivalents Size: 6 x 150mm Graduation 1mm, 1/64ths Width: 1/2

HIGH PERFORMANCE LINEAR HEIGHT GAUGES BEST IN CLASS ACCURACY LH-600E LINEAR HEIGHT QM-HEIGHT FALL FLYER Oct 1 - Dec 20, 2016 Sophisticated accuracy (1.1 + 0.6 L/600) µm Measuring range (stroke): 0-38 (24 ) / 0-972mm(600mm) Selectable resolution Pneumatic full/semi floating system allows adjustment of air cushion height Order No.518-352A-21 SPECIAL $10,114. 20 Reg. $11,238.00 Best-in-class accuracy ±(2.4+2.1L/600)μm New built-in air assist mechanism enables smooth movement along the surface plate Selectable resolution ABSOLUTE linear encoder for position detection Easy-to-view, simple control panel allows performance of main measurements with a single key View a video demonstration for LH-600 Full range CALIBRATION $380.00 of probe options available View a video demonstration for QM-Height Mitutoyo M3 Styli Kit for Linear Height gauges Order no. K650986 $625.00 Includes steel styli: (Ø x L (mm)) : 12.7 x 33; 4 x 31; 3 x 21; 2 x 21; 1 x 21; S-receiver, pin spanner, 10mm and 20mm steel extensions SPECIAL OFFER! Upgrade to Pneumatic Float model (includes free adaptor) for the same price as a standard unit. Order No. Model Type List Now only Calibration 518-231 14" $4,988.00 $4,988.00 $140.00 Standard 518-233 24" $5,613.00 $5,613.00 $216.00 64PKA129A* 14" Pneumatic $5,613.00 $4,988.00 $140.00 64PKA130A* 24" Float $6,238.00 $5,613.00 $216.00 *includes Adaptor No. 06AEG180JA at no charge ($68.00 list price) BLACK GRANITE SURFACE PLATES (100 lbs. load/sq. ft. No ledge) Size H Acc. Order No. Wt. (lbs.) Grade 9 x 12 3 100 517-801 40 SALE Includes Freight $165.75 12 x 18 4 100 517-803 100 $260.95 A 18 x 28 4 130 517-805 200 (Inspection) $509.15 24 x 36 5 170 517-808 500 $969.00 24x36 6 85 517-708 600 $1,222.30 AA (Inspection) 36x48 8 150 517-714 1500 $2,494.75 Remarks: Accuracies shown in microinches (µin) STEEL STANDS Size Order No. Wt. (lbs.) PRICE 1 18 x 24 517-952 50 $675.00 24 x 36 517-956-1* 77 $1,031.00 36 x 48 517-964 105 $964.00 Remarks: *with casters 1 Freight charges included when shipped with granite plate 9

FALL FLYER Oct 1 - Dec 20, 2016 BUILD YOUR OWN DIGITAL READOUT PACKAGE SAVE 5% ON COUNTER & SCALES (WITH MINIMUM PURCHASE) BUILD YOUR OWN DRO PACKAGE: MINIMUM PURCHASE: One AT715 Linear Scale (see list below) KA-200 Counter (2 or 3 axis) Code Description WITHOUT MIN. PURCHASE WITH MIN. PURCHASE 174-183A KA-200 Counter (2-axis) $734.00 $697.30 174-185A KA-200 Counter (3-axis) $1,080.00 $1,026.00 Your choice 1 pc. Linear Scale (see table below) See table for pricing with minimum purchase AT715 ABSOLUTE, Coolant-Proof Linear Scales Order WITHOUT MIN. WITH MIN. Effective range No. PURCHASE PURCHASE 539-801 4"/ 100mm $ 370.00 $ 351.50 539-802 6"/ 150mm $ 370.00 $ 351.50 539-803 8"/ 200mm $ 374.00 $ 355.30 539-804 10"/ 250mm $ 374.00 $ 355.30 539-805 12"/ 300mm $ 374.00 $ 355.30 539-806 14"/ 350mm $ 378.00 $ 359.10 539-807 16"/ 400mm $ 383.00 $ 363.85 539-808 18"/ 450mm $ 390.00 $ 370.50 539-809 20"/ 500mm $ 394.00 $ 374.30 539-811 24"/ 600mm $ 401.00 $ 380.95 539-813 28 / 700mm $ 409.00 $ 388.55 539-814 30"/ 750mm $ 415.00 $ 394.25 539-815 32"/ 800mm $ 418.00 $ 397.10 539-816 36"/ 900mm $ 456.00 $ 433.20 539-817 40"/ 1000mm $ 474.00 $ 450.30 539-818 44 /1100mm $ 538.00 $ 511.10 539-819 48"/ 1200mm $ 603.00 $ 572.85 539-820 52 /1300mm $ 669.00 $ 635.55 539-821 56"/ 1400mm $ 731.00 $ 694.45 539-822 60"/ 1500mm $ 811.00 $ 770.45 539-823 64 /1600mm $ 909.00 $ 863.55 539-824 68 /1700mm $ 1,004.00 $ 953.80 539-825 72"/ 1800mm $ 1,100.00 $ 1,045.00 539-860 80"/ 2000mm $ 1,675.00 $ 1,591.25 539-861 88 /2200mm $ 1,788.00 $ 1,698.60 539-862 96 /2400mm $ 2,150.00 $ 2,042.50 539-863 100 /2500mm $ 2,200.00 $ 2,090.00 539-864 104"/ 2600mm $ 2,250.00 $ 2,137.50 539-865 112"/ 2800mm $ 2,400.00 $ 2,280.00 539-866 120"/ 3000mm $ 2,675.00 $ 2,541.25 The updated KA-200 Counter has many new features making it an excellent addition to manual machine retrofit packages. Many high end functions packed into this standard counter Large LED display is sharp and bright. Easy to see at a distance The positive touch front panel keys are solid and easy to push with fast response The sub display lets you know what function you are currently using AT715 ABSOLUTE COOLANT PROOF SCALES ABSOLUTE encoder eliminates the need for origin restoration, and drastically reduces power consumption IP67 coolant-proof protection 5 Year Warranty! BRACKETS: Type Code Description Price 64AAB196 Universal bracket kit (12 ) $267.00 Milling Systems 64AAB197 Universal bracket kit (14-16 ) $275.00 64AAB199 Screw kit $58.00 Lathes 64AAB191 Bracket Kit $324.00 Grinders 64AAB194 Scale Y Axis $451.00 All Systems 64AAB200 Machine Arm Kit (KA Counter) $226.00 We re so confident in the exceptional performance of our AT-715 Series Coolant Proof Linear Scales that we offer a full 5 Year Warranty! 10

NOW ON SALE AT YOUR PARTICIPATING MITUTOYO DISTRIBUTOR Contact your particpating distributor for pricing and product details. Mitutoyo HR-Series Hardness Testers Rockwell and Rockwell Superficial testers Automatic test force control Choose from several digital types with data output, test force selection by knob selector, Auto-start and Auto-brake functions View a video demonstration for HR Hardness Testers Mitutoyo PH-3515F Profile Projector packages with KA-200 Counter or QM Data Processor Surface illumination included Heavy-duty, bench-top model with horizontal optical system and erect image on daybright screen, 14 dia. protractor screen with crosshair line for easy alignment 10 x 6 floating type workstage incorporates linear scales for fast, accurate measurement, 100lb. maximum load PH-A14 FALL FLYER Oct 1 - Dec 20, 2016 PH-A14 Projector packages also available PH-3515F 8 x 4 floating type Bench-top model with horizontal optical system and inverted image CV-2100M4 RA-120 Cross-travel table No. 218-001 (included with CV-2100M4 Package) Table top: 11 x 7 (280 x 180mm) XY travel: 3.94 x 1.97 (100 x 50mm) Max. load 110 lbs (50kg) RA-1600M RA-120P High-precision ARC scale This scale directly tracks the arc trajectory of the stylus tip so that the most accurate compensation can be applied to the scale output, which leads to higher accuracy and resolution. CONTOUR MEASURING SOLUTIONS Main features and benefits of CV-2100M4: Newly designed high-precision digital ARC scale provides Z-axis accuracy and resolution of laboratory grade machines at shop-floor prices. Quick-release grip handle on column Z-axis for CV-2100M4 model offers rapid part set-ups by multiple users. Centralized key operation buttons on front of X-axis drive unit provide quick/easy operations resulting in higher measurement efficiency. New motorized auto stylus up/down function means high-volume repetitive and multi-point measurements are now achieved using part programs. New Z-axis detector design increases measuring range to 50mm for more versatility in part size capacity. ROUNDNESS MEASURING SOLUTIONS Roundtest RA-120 / 120P are compact, affordable and simple-touse devices for measuring part geometry on the shop floor. They also provide superb data analysis capabilities as required with laboratory roundness measuring instruments and have a ±1000µm wide range detector and precision turntable with excellent rotation accuracy. RA-1600M is a PC-based roundness and cylindrical form measuring system with numerous analysis features allowing inspection of a variety of manufactured parts. The system has top-end precision and high-rotational of (0.03+6H/10000)µm commonly found on higherend model machines. UP TO Model List Promo CV-2100M4 $32,117 USD $26,800 USD Model List Promo RA-120 $13,400 USD $11,900 USD RA-120P* $20,700 USD $14,900 USD RA-1600M* $31,600 USD $28,900 USD * PC-based models 11

This state-of-the-art centre, located in Mississauga, provides a large scope of calibration services on a comprehensive range of measuring equipment. The Mitutoyo Calibration Laboratory is certified by the Standards Council of Canada as part of the Canadian Laboratory Assessment Services (CLAS) program in accordance with ISO/IEC 17025. Certificate Number 2003-05, Accredited Laboratory No. 503. Visit the following link for more information. http://www.mitutoyo.ca/metrology-services.html SPECIAL PROMOTIONS CANADIAN EDITION View our IMTS Special Promotions flyer Canadian Edtion Prices effective until December 16, 2016. IMTS PROMOTION SAVE UP TO Manual CMM Packages 15% CNC CMM Packages (with Manual, Motorized or Scanning Head) QV-Active CNC Vision Measuring Package (with or without Touch Probe option) 13% 14% Quick Image 2-D Vision Measuring System 14% Roundness Measuring Systems 28% Contour Measuring Systems 17% Mitutoyo offers complete turn-key system packages for Manual / CNC CMMs and Vision Systems with low cost of ownership through included agreements. PROGRAMME DE PRODUCTIVITÉ EN ÉDITION LIMITÉE Mitutoyo Canada Inc. Mississauga (905) 821-1261 Montréal (514) 337-5994 info@mitutoyo.ca www.mitutoyo.ca Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this printed matter as well as other technical data are to be regarded as approximate average values. We reserve the right to make changes to the corresponding designs. The stated standards, technical regulations, descriptions and illustrations of the products were valid at the time of printing. In addition, the products are subject to Canadian Export Administration Regulations. Re-export or relocation of Mitutoyo products may require prior approval by an appropriate governing authority. We have tried to be as accurate as possible, however, there may be some errors in text, specifications or price. Please confirm with your customer service rep. Some items may not be exactly as shown. Prices are in Canadian dollars, unless otherwise specified. Applicable taxes and shipping charges are extra. 2015 Mitutoyo Canada Inc., Mississauga ON Canada We reserve the right to change specifications and prices without notice.