ABS Digimatic Indicator ID-C

Transcription

1 Small Tool Instruments and Data Management Standard Digital Indicator ABS Digimatic Indicator ID-C Catalog No. E40-54 Digital indicators offer dramatically improved readability, usability and functionality

2 Digital indicators that offer dramatically improved ease of ABS Digimatic Indicator ID-C The Nakatsugawa plant is in the central industrial park of leafy Nakatsugawa city, in the Gifu prefecture. This plant specializes in manufacturing sensor products and handles the complete development-to-production cycle for measuring instruments such as dial gages, test indicators, Digimatic indicators, and bore gages. It was opened in 997 as the th Mitutoyo plant in Japan. Using its state-of-the-art production techniques and facilities, this plant continues to provide Mitutoyo products that are praised around the world and used with confidence. Actual size Actual size Actual size 54-90B B B ABS Digimatic indicator ID-C is a standard digital indicator. A large LCD incorporating mm characters (existing products: 8.5mm) is used to improve visibility, and three large, easy-to-press buttons are used in the design to make operations easier to perform. In addition, this affordable product has various measurement functions, including the ability to perform scaling calculations, judge tolerance, hold data, and perform general comparison measurements. Examples of use

3 ) reading measurement values, usability and functionality. The large LCD incorporates mm characters giving.5 times the character area of existing products (which display 8.5mm characters) making measurement values much easier to read.. Large LCD Three large buttons Actual size mm The popular three-large-button design, which is used in products such as the ABS coolant proof Digimatic indicator ID-N/ID-B, makes buttons easier to press and operations easier to perform. 4. Functions that support measurement The ID-C has various functions, including the ability to hold data, output data, switch the measuring direction, judge tolerance, change the scale factor, and a lock to prevent misoperation. (For details, see page 5.) rotary display The display can be rotated 0, allowing use at a position where you can easily read the measurement value. Measurement value and tolerance judgment Enlarged display of the tolerance judgment result 0 Parameter setting mode Count direction switching, tolerance judgment setting, resolution switching, scale factor setting, and function lock setting ABS measurement mode Preset using a reference gage to measure the absolute value from a measurement reference Power switch Data output (when connected to an external device) Data hold (when no external device is connected) Switches between the ABS (preset) and INC (zeroset) measurement modes INC measurement mode Zeroset using a reference gage to perform a comparison measurement of the difference between the reference gage and measured workpiece. Application products for one-touch quick measurement Various application products are available that enable you to perform one-touch quick measurement of the thickness of small parts, papers, felt, lenses, and pipes, as well as the depth of narrow grooves on cylindrical workpieces, groove depth, and steps. (For details, see pages and 7.) ABS Digimatic upright gage Measured workpiece mm reference gage Operation in ABS (preset) measurement mode Switches the measurement mode between ABS and INC. Press and hold the SET button (for at least two seconds) to switch the mode. 50 mm reference gage 4.7 Measured workpiece 54.7 Operation in INC (zeroset) measurement mode The lifting function that moves the spindle up and down has been expanded to improve work efficiency when using the ID-C mounted on a stand. For models that have a.7mm measuring range, a lifting lever (special accessory) can be mounted on the left or right side, improving work efficiency and smoothness of movement. A lifting cable (special accessory) provides a maximum of approximately 5.4mm of spindle movement (twice that of existing models). So for models that have a.7mm or 5.4mm measuring range, the spindle can be moved through the entire measuring range. (Applied to models that have a 50.8mm measuring range, the spindle can be retracted by approximately 5.4mm from the extended position.) Lifting knob (special accessory) By using a lifting knob (special accessory) fitted to the the top of the spindle, you can perform fullstroke operation without directly touching the spindle. Lifting lever (finger hook) Standard accessory (only for models that have a measuring range of 5.4mm or 50.8mm) If dust or coolant gets into the gap between the spindle and main unit while using the lifting knob, the spindle travel may become rough or the indicator may fail altogether. Therefore avoid using the ID-C in environments containing dust or coolant mist. ABS Digimatic thickness gage ABS Digimatic depth gage. Expanded lifting capability The ABS (ABSOLUTE) sensor 7. The original Mitutoyo ABS (ABSOLUTE) sensor, which is capable of relocating the origin even after turning the power off, enables you to quickly start multi measurement. Also, the ABS measurement mode can be restored even after measurement in the INC mode, where zerosetting is possible at any position, improving work efficiency. 8. Inspection certificate provided as standard Mitutoyo provides an inspection certificate that includes inspection data as standard to guarantee that every product shipped is of high quality and safe to use. Upon request, we can also calibrate purchased measuring instruments and issue a calibration certificate that proves traceability to national (or international) standards for a fee. To minimize calibration uncertainty as much as possible, both the inspection certificate and calibration certificate are issued after measurement using dedicated testers developed with advanced Mitutoyo measurement technologies. Note that the inspection certificate cannot be used to obtain a calibration certificate because the former does not indicate the date of purchase. CERTIFICATE OF INSPECTION Certificate No Product name : Digimatic Indicator Code No. : Model : ID-CX Serial No. : 0845 Graduation : 0.00mm Measuring span :.7mm Temperature : 0(Standard Temperature) Inspection standard : Mitutoyo standard ) QC Manager : T.Kosuda Errors [µm] MPE of indication /Overall /Hysteresis /Repeatability Method of inspection:mitutoyo (No sign) unit: µm error passed Based on : ASME B89..0M-00 Traceable to : NMIJ/AIST by JCSS No.000. NIST via No.8/774-08/M : UP : DOWN Mitutoyo Corporation A S M E Maximum Permissible error (MPE) of indication Overall (*) Hysteresis Repeatability unit: µm (*) Overall magnification and linearity Judgement (: Passed () ) The quantizing error ( count) is excluded from the specification value Position(mm) error + passed.7

4 ABS Digimatic Indicator ID-C SPECIFICATIONS Metric ISO/JIS Type Order No. Measuring range Accuracy* [ Hysteresis* Repeatability* Measuring force Mass Remarks Resolution 0.00mm/0.0mm B.7mm 0.00mm 0.00mm 0.00mm.5N or less 70g B.7mm 0.00mm 0.00mm 0.00mm 0.7, 0., 0.4N or less 70g Low measuring force B 5.4mm 0.00mm 0.00mm 0.00mm.8N or less 90g B 50.8mm 0.005mm 0.00mm 0.00mm.N or less 0g Resolution 0.0mm B.7mm 0.0mm 0.0mm 0.0mm 0.9N or less 70g B.7mm 0.0mm 0.0mm 0.0mm 0.5, 0.4, 0., 0.N or less 70g Low measuring force B 5.4mm 0.0mm 0.0mm 0.0mm.8N or less 90g B 50.8mm 0.04mm 0.0mm 0.0mm.N or less 0g Inch/Metric ISO/JIS Type and ANSI/AGD Type Order No. Measuring range Accuracy* [ Hysteresis* Repeatability* Measuring force Mass Remarks Resolution.00005"/.000"/.0005"/0.00mm/0.0mm B.5" ±.0000"/0.00mm.0000"/0.00mm.0000"/0.00mm.5N or less 70g B.5" ±.0000"/0.00mm.0000"/0.00mm.0000"/0.00mm.5N or less 70g B.5" ±.0000"/0.00mm.0000"/0.00mm.0000"/0.00mm 0.7, 0., 0.4N or less 70g Low measuring force B.5" ±.0000"/0.00mm.0000"/0.00mm.0000"/0.00mm 0.7, 0., 0.4N or less 70g Low measuring force 54-47B " ±.0000"/0.00mm.0000"/0.00mm.0000"/0.00mm.8N or less 90g 54-47B " ±.0000"/0.00mm.0000"/0.00mm.0000"/0.00mm.8N or less 90g 54-49B " ±.0000"/0.005mm.0000"/0.00mm.0000"/0.00mm.N or less 0g 54-49B " ±.0000"/0.005mm.0000"/0.00mm.0000"/0.00mm.N or less 0g Resolution.0005"/0.0mm B.5" ±.000"/0.0mm.000"/0.0mm.0005"/0.0mm 0.9N or less 70g B.5" ±.000"/0.0mm.000"/0.0mm.0005"/0.0mm 0.9N or less 70g B.5" ±.000"/0.0mm.000"/0.0mm.0005"/0.0mm 0.5, 0.4, 0., 0.N or less 70g Low measuring force B.5" ±.000"/0.0mm.000"/0.0mm.0005"/0.0mm 0.5, 0.4, 0., 0.N or less 70g Low measuring force B " ±.000"/0.0mm.000"/0.0mm.0005"/0.0mm.8N or less 90g 54-47B " ±.000"/0.0mm.000"/0.0mm.0005"/0.0mm.8N or less 90g B " ±.005"/0.04mm.000"/0.0mm.0005"/0.0mm.N or less 0g 54-49B " ±.005"/0.04mm.000"/0.0mm.0005"/0.0mm.N or less 0g : ANS/AGD Type Note) Products with an Order No. suffixed B have a flat back, and other models have a back with a lug. * Overall hysteresis and repeatability specifications are valid for normal measurement at 0 C, and the quantizing error of ± count is excluded. COMMON SPECIFICATIONS Display: -digit LCD, sign Contact : Spherical tip SR =.5mm (carbide tipped), part No. 90 (for ISO/JIS Type) part No. BZB005 (for ANSI/AGD Type) Spindle orientation for measurement: - Standard model that has a.7mm measuring range: No restrictions - Standard model that has a 5.4mm or 50.8mm measuring range: Normally at any position between the spindle ing vertically downward to the spindle horizontal. To perform measurement with the spindle ing above the horizontal requires a reverse-position coil spring (special accessory). - Low measuring force models: See 'Setting measuring force on low measuring force models' on page 4. Position detection method: Capacitance type absolute linear encoder Battery: SR44 (silver oxide button cell), part No Battery life: Approximately 7,000 hours of continuous use Maximum response speed: Not restricted (except for scanning measurement) Service temperature range: 0 to 40 C Storage temperature range: 0 to 0 C 4

5 Setting measuring force on low measuring force models /404B/405/405B/40/40B Spindle orientation Spring Weight (approximately 0. N) Maximum measuring force Yes Yes 0.5N Pointing vertically downward Yes No 0.4N No Yes 0.N No No 0.N Horizontal Yes No 0.N Note) Operation using configurations other than shown above is not guaranteed /94B/95/95B/9/9B Spindle orientation Spring Weight Maximum (approximately 0. N) measuring force Yes Yes 0.8N ( =0.8) Yes No 0.N Pointing vertically downward No Yes 0.4N No No Not guaranteed Horizontal Not guaranteed Note) Operation using configurations other than shown above is not guaranteed. DIMENSIONS ISO/JIS Type M.5X mm range models M.5X mm range models M.5X mm range models ANSI/AGD Type "." 9 /4" 9..7".5.4".4" 9..7".5.4".4" ".5 /4" " 50.8 " " 59." " 85..5" 0.79".5 /4" 54." " Contact No.4-48 thread.7mm range models 7..".5 /4" " 7.7.7".0" 7..8" 4.5.".5 /4" 59." * is the symbol denoting American Gage Design (AGD). It shows conformance to certain dimensions for Dial Indicators, as specified in ASME / AGD, intended to promote interchangeability. Only applicable to models with an "E" suffix " Contact No.4-48 thread 5.4mm range models " 95.74" 7..8" " 59." 5.05".5.".5 /4" Contact No.4-48 thread 50.8mm range models 5

6 Functions Zero-setting function (INC measurement mode) Preset function (ABS scale origin setting) The preset value can be changed easily by using the SET (digit movement) and MODE (value change) buttons. 0 rotary display 0 0 Resolution switching (For 0.00mm or.00005" resolution models) Models with 0.00mm resolution are capable of displaying in 0.0mm resolution. Models with.00005" resolution are capable of displaying in.000" and.0005" resolution. Select the resolution according to the application. Data output (when connected to an external device) From the output terminal, measurement data can be output to a PC via a compact printer, Digimatic mini processor DP-VR, or input tool by pressing the button below the display. Wireless transmission of measurement data to a PC can also be performed using the measurement data wireless communication system U-WAVE. Switching the direction The measuring direction can be reversed. Judging the tolerance Performs judgment (OK, +NG, -NG) according to the set upper and lower limit values and displays the result as a symbol. Enlarged display of the OK and NG symbols is possible. Display value holding (when no external device is connected) Calculation: f(x) = Ax Mounting the ID-C on a measuring jig and setting the calculation factor (to any value) allows direct measurement without using a conversion table and improves measurement efficiency. Connecting cables for data output (special accessory) m: No.9058 m: No No DP-VR (special accessory) Input tool No IT-0U (special accessory) Function locking Ensures reliability of measurement by locking the settings to prevent preset function settings from being changed by mistake. Measurement value and tolerance judgment Enlarged display of the tolerance judgment result Low battery voltage alarm Error alarm Standard accessories Operation manual Inspection certificate Lifting lever (finger hook) (Only for models that have a 5.4mm or 50.8mm measuring range) Silver oxide button cell for the monitor: SR44 Part No Weight (only for low measuring force models) Special accessories 4 Lifting lever Part No. EZA98 (for models that have a.7mm measuring range ISO/JIS Type) Part No. EZA99 (for models that have a.7mm measuring range ANSI/ADG Type) Lifting cable, part No Lifting knob Part No. EZA05 (for models that have a.7mm measuring range ISO/JIS Type) Part No. EZA50 (for models that have a.7mm measuring range ANSI/ADG Type) Part No. EZA97 (for models that have a 5.4mm measuring range) Part No. EZA00 (for models that have a 50.8mm measuring range) Interchangeable contact s for Mitutoyo dial gages Shell Flat Needle Various types of contact s are available. Various backs for standard Mitutoyo ( series) dial gages Reverse-position coil spring Part No. 0ACA57 (for models that have a 5.4mm measuring range) Part No. 0ACA77 (for models that have a 50.8mm measuring range) Connecting cable (m), part No Connecting cable (m), part No U-WAVE (measurement data wireless communication system) Digimatic mini processor DP-VR No Multiplexer MUX-0F, No Display unit EC-0D, No Input tool (USB keyboard signal conversion type) IT-0U, No No.7007 Recommended stands 5 Dial gage stand, No Granite comparator stand BSG-0, No Comparator stand BSC-0, No Comparator stand BSG-0, No

7 Application Products ABS Digimatic Thickness Gage For one-touch quick measurement of the thickness of small parts, papers, and felt Rust-free ceramic contact and anvil (except No ) Metric ISO/JIS Type Order No. Resolution Measuring range Throat depth Contact and anvil Parallelism of contact and anvil mm 0~0mm 0mm 0mm flat 0µm or less ±0µm.5N or less mm 0~0mm 0mm 0mm flat 0µm or less ±0µm.5N or less mm 0~mm mm.mm flat (carbide tipped) µm or less ± µm.5n or less Inch/Metric ANSI/AGD Type Order No. Resolution Measuring range Throat depth Contact and anvil Parallelism of contact and anvil S.0005"/0.0mm 0~.4"/0~0mm 0mm 0mm flat.0005" or less ±.00".5N or less 547-0S.0005"/0.0mm 0~.4"/0~0mm 0mm 0mm flat.0005" or less ±.00".5N or less S.00005"/0.00mm 0~.47"/0~mm mm.mm flat (carbide tipped).000" or less ±.000".5N or less Note). Changing the contact requires total adjustment, including the main display unit. Contact Mitutoyo for advice.. The accuracy specification does not include the quantizing error of ± count.. Left-handed models can be supplied to special order. ABS Digimatic Lens Meter Designed for measuring the thickness of concavo-convex lenses and flat objects The thickness of flat objects can be measured by replacing the anvil. Includes a spherical contact. Metric ISO/JIS Type SR Concave lens Spherical contact SR Convex lens Flat contact Moon lens Flat contact 9. Contact 9. S4 spherical contact Standard accessory adjustment: mm SR (Throat depth) 85 Order No. Resolution Measuring range Throat depth adjustment mm 0~0mm 0mm mm ±0µm or less.5n or less Inch/Metric ANSI/AGD Type Order No. Resolution Measuring range Throat depth adjustment 547-S.0005"/0.0mm 0~.4"/0~0mm 0mm mm ±.00" or less.5n or less Note) The accuracy specification does not include the quantizing error of ± count. Left-handed models can be supplied to special order. 7

8 ABS Digimatic Pipe Gage Designed for measuring the thickness of pipes and curved boards Best suited for measuring the depth of narrow grooves on cylindrical workpieces The contact and measuring face of the anvil are mm thick blade blades. Contact Tip:.5 Effective throat depth 0 Metric ISO/JIS Type Order No. Resolution Measuring range Throat depth Minimum inside diameter of pipe mm 0~0mm 0mm.5mm ±0µm or less.5n or less Inch/Metric ANSI/AGD Type Order No. Resolution Measuring range Throat depth Minimum inside diameter of pipe 547-S.0005"/0.0mm 0~.4"/0~0mm 0mm.5mm ±.00" or less.5n or less Note). Changing the contact requires total adjustment, including the main display unit. Contact Mitutoyo for advice.. The accuracy specification does not include the quantizing error of ± count.. Left-handed models can be supplied to special order. ABS Digimatic Groove Gage Contact (Throat depth) 85 Metric ISO/JIS Type Order No. Resolution Measuring range Throat depth Contact and anvil dimensions (W D) mm 0~0mm 0mm.5mm x mm ±0µm or less.5n or less Inch/Metric ANSI/AGD Type Order No. Resolution Measuring range Throat depth Contact and anvil dimensions (W D) 547-S.0005"/0.0mm 0~4"/0~0mm 0mm.5mm x mm ±.00" or less.5n or less Note). Changing the contact requires total adjustment, including the main display unit. Contact Mitutoyo for advice.. The accuracy specification does not include the quantizing error of ± count.. Left-handed models can be supplied to special order. ABS Digimatic Depth Gage 59 Suitable for measuring the depth of holes, narrow grooves, and steps. The lifting lever can be used either on the left or right sides. (05) (7) (5) () Metric ISO/JIS Type Order No. Resolution Measuring Measuring Base range Stroke Accuracy force Length Width Flatness mm 0.0mm ±0µm.5N or less 5µm or less mm 0~00mm mm mm mm 0.00mm ±5µm.5N or less µm or less mm Inch/Metric ANSI/AGD Type (0) 7 5 A SR.5 Contact : Carbldetipped ball JAA4 Extension rods 5 pcs. (0, 0, 0, 0, 00mm) Order No. Resolution Measuring Measuring Base Contact : Carbldetipped ball range Stroke Accuracy force Extension rods Length Width Flatness 547-7S.0005"/0.0mm 0~8".5" ±.00" or less.5n or less.5".".000" or less 4 pcs. (.5",",",4") 547-8S.0005"/0.0mm 0~8".5" ±.00" or less.5n or less 4".".000" or less 4 pcs. (.5",",",4") JAZA S.00005"/0.00mm 0~8".5" ±.000" or less.5n or less.5".".00008" or less 4 pcs. (.5",",",4") S.00005"/0.00mm 0~8".5" ±.000" or less.5n or less 4".".00008" or less 4 pcs. (.5",",",4") Note) The accuracy specification does not include the quantizing error of ± count. 8

9 ABS Digimatic Bench Gage The support plate allows easy reading by tilting the anvil. Carbide measuring faces (for the contact and anvil) The lifting lever can be used either on the left or right sides Effective throat depth Metric Support plate Order No. Indicator stroke Resolution Workpiece height Effective throat depth adjustment mm 0.0mm 0mm 5mm mm ±0µm or less.5n or less Inch/Metric ISO/JIS Type ANSI/AGD Type Order No. Indicator stroke Resolution Remarks (contact ) Effective throat depth Workpiece height 547-0S.5".0005"/0.0mm.48" DIA flat type.59" " ±.00" or less.5n or less Note) The accuracy specification does not include the quantizing error of ± count. 0 Flat anvil ABS Digimatic Upright Gage Best suited for inspection of small parts at a site Carbide ball contact The lifting lever that is a standard accessory for No , S can be used either on the left or right sides. Lifting cable (hardened steel) Effective measuring range 5 40 SR.5 5 Metric Center of anvil Measuring depth Center of contact Order No. Resolution Measuring range Workpiece height mm.7mm 40mm (steel type) ±0µm or less mm.7mm 50mm (ceramic type) 0mm ± µm or less.5n or less mm.7mm 40mm (steel type) ± µm or less Inch/Metric ISO/JIS Type ANSI/AGD Type Order No. Resolution Measuring range Workpiece height S.0005"/0.0mm.5".57" DIA steel type." ±.00" or less 547-0S.00005"/0.00mm.5".97" DIA ceramic type." ±.000" or less.5n or less S.00005"/0.00mm.5".57" DIA steel type." ±.000" or less Note). The lifting lever (part No. EZA98) is a standard accessory for The lifting lever (part No. EZA99) is a standard accessory for S.. The lifting cable (part No ) is a standard accessory for , 547-0S, S. 4. The accuracy specification does not include the quantizing error of ± count. The ABS (ABSOLUTE) scale used in these products is a capacitance type absolute encoder. Its patent has been registered in Japan, the U.S., the U.K., Germany, and China. 0 9

10 Various Digimatic Indicators ID-C: Standard Digital Indicator ID-N/B: waterproof, 5mm slim body with various functions ID-H: infrared remote controller, high accuracy, and various functions ID-S: cost-effective type that has basic functions ID-U05: general-purpose type that has a 5.4mm measuring range ID-CRB: has a built-in calculation function ID-CA: has a peak hold function ID-CGB: internal diameter measuring instrument dedicated to cylinder gages Export permission by the Japanese government may be required for exporting our products according to the Foreign Exchange and Foreign Trade Law. Please consult our sales office near you before you export our products or you offer technical information to a nonresident C (CH) NE, Printed in Japan Mitutoyo Corporation 0-, Sakado -chome, Takatsu-ku, Kawasaki-shi, Kanagawa -85, Japan T +8 (0) F +8 (0) Note: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance data contained in this pamphlet, as well as other technical data are to be regarded as approximate average values. We therefore reserve the right to make changes to the corresponding designs, dimensions and weights. The stated standards, similar technical regulations, descriptions and illustrations of the products were valid at the time of printing. Only quotations submitted by ourselves may be regarded as definitive.