How to Configure Your E-mail Client for HughesNet Solution The following instructions will assist you in configuring your e-mail software to work with the new HughesNet E-mail addresses. If you are using something@hughes.net for e-mail, you will need to know your HughesNet e-mail address, username and password before you begin. If you are using a web-based e-mail service, such as Yahoo or MSN, etc. you will not need to configure an e-mail client. If you are using an e-mail service other than HughesNet, you will only need to change the Outgoing Server to which will allow you to send e-mail over you HughesNet (formerly DirecWay) system. Configuring E-mail in Microsoft Outlook XP 1. Launch Outlook. 2. From the Tools menu, select E-mail Accounts. 3. The E-mail Accounts window appears. Select Add a new E-mail account. 4. Click Next. The next screen prompts to select the server type: 5. Select either POP3 or IMAP. 6. Click Next. The next screen prompts to enter e-mail settings: 7. Enter e-mail account information: 8. Name E-mail Address Incoming Mail Server Outgoing Mail Server User Name Password your full name When configuring your POP3 logon, be sure to use the complete email address (). In order to send SMTP authentication then enter your email account () and your password. Passwords are case 9. Click More Settings. 10. Select the Outgoing Mail Server tab. 11. Select My outgoing server (SMTP) requires authentication. 12. Click OK to return to the main configuration screen. 13. Click Next. 14. Click Finish.
Configuring E-mail in Microsoft Outlook 2000 1. From the Tools menu, select Accounts...The Internet Accounts window appears. 2. Click the Add button and select Mail... The Internet Connection Wizard appears. 3. Enter the name in the Display name field. This name will appear in the From field of the e-mail messages that are sent. 4. Click Next. 5. Enter the e-mail address: 6. Click Next. 7. Select the e-mail protocol that they want to use. 8. In the Incoming mail server field, enter the name of the mail server, like this: 9. In the Outgoing mail server field, enter the name of the SMTP server, like this: When configuring your POP3 logon, be sure to use the complete email address (). In order to send SMTP authentication then enter your email account () and your password. Passwords are case 10. Click Next. 11. In the Account name field, enter the complete e-mail address: (DO NOT USE ANY ALIAS) 12. Enter the e-mail password in the Password field. 13. Click Next. 14. Select the Internet connection method. 15. Click Next.. If you are using a modem to connect to a dial-up service provider, select Connect using my phone line. a. If you have a fast Internet connection, select Connect using my local area network (LAN). b. If you want to configure your Internet connection separately, select I will establish my Internet connection manually. 16. Click Finish. The new e-mail account appears in the Internet Accounts window: 17. Select your new e-mail account in the account list. 18. Click Properties. The Properties window appears. 19. Click the Servers tab. 20. Select My server requires authentication. 21. Click OK to return to the Internet Accounts window. 22. Click Close.
Configuring E-mail in Microsoft Outlook Express Note: If you would like to view an online tutorial of the Outlook Express E-mail Configuration process, click here, then select the Outlook Express menu choice. 1. Start Outlook Express. 2. Select the Tools menu. 3. Select the Accounts... menu item. 4. Select the Mail tab. 5. The Internet Accounts dialog opens. 6. Click the Properties button. 7. Select the text box to enter your name choice for the mail server. 8. Change DIRECWAY User to Hughesnet User. 9. Select the E-mail address text box. 10. Change the e-mail address to: where user is your e-mail name. 11. Select the Servers tab. 12. Select the Incoming mail (POP3) text box. 13. Change the address to: 14. Select the Outgoing mail (SMTP) text box. 15. Enter 16. Select the Account name text box. 17. Enter your account name as: where user is your e-mail name. 18. Enter your 19. Select the Password text box. 20. Enter password. 21. Select the My server requires authentication check box. 22. Click the Apply button. 23. Click the OK button. 24. Click the Close button. Your settings are complete!
Configuring E-mail in Eudora 1. Launch Eudora. 2. From the Tools menu, select Personalities. The Personalities pane appears. 3. Right-click inside the Personalities pane to display the pop-up menu. 4. Select New... The New Account Wizard appears. 5. Select Create a brand new account. 6. Click Next. 7. In the Personality Name field, enter an arbitrary name for this account. This is a name that the user will use to distinguish this account from any others they might have. 8. Click Next. 9. Enter the name in the Your Name field. This name will appear in the From field of the e-mail messages that are sent. 10. Click Next. 11. In the E-mail Address field, enter the e-mail address: 12. Click Next. 13. In the Login Name field, enter the complete e-mail address: 14. Click Next. 15. In the Incoming Server field, enter the name of the mail server, like this: 16. Select the e-mail protocol you want to use. 17. Click Next. 18. In the Outgoing Server field, enter the name of your SMTP server: When configuring your POP3 logon, be sure to use the complete email address (). In order to send SMTP authentication then enter your email account () and your password. Passwords are case 19. Make sure that Allow Authentication is selected. 20. Click Next. 21. Click Finish.
Configuring E-mail in Netscape Messenger 1. Launch Netscape Messenger. Alternatively, launch the Netscape browser, then open the Window menu and select Mail & Newsgroups. 2. From the Edit menu, select Mail & Newsgroups Account Settings...The Mail & Newsgroups Account Settings window appears. 3. Click Add Account...The Account Wizard appears. 4. Select E-mail account. 5. Click Next. 6. Enter the name in the Your Name field. This name will appear in the From field of the e-mail messages that are sent. 7. Enter the e-mail address in the E-mail Address field: 8. Click Next. 9. Select the e-mail protocol you want to use. 10. Enter the hostname of the e-mail server in the Incoming Server field: 11. Click Next. 12. In the User Name field, enter the complete e-mail address: 13. Click Next. 14. Click Finish. The new account now appears in the Mail & Newsgroups Account Settings list. 15. Click Outgoing Server (SMTP). 16. In the Server Name field, enter the hostname of the SMTP server: When configuring your POP3 logon, be sure to use the complete email address (). In order to send SMTP authentication then enter your email account () and your password. Passwords are case 17. Select User name and password. 18. In the User Name field, enter the full e-mail address. 19. Click OK.
Configuring E-mail in Mozilla 1. Launch Mozilla. 2. From the Window menu, select Mail & Newsgroups. The Mail & Newsgroups window appears. 3. From the Edit menu, select Mail & Newsgroups Account Settings...The Mail & Newsgroups Account Settings window appears. 4. Click Add Account...The Account Wizard appears. 5. Select E-mail account. 6. Click Next. 7. Enter the username in the Your Name field. This is the name that will appear in the From field of the messages that are sent from this account. 8. Enter the e-mail address in the E-mail Address field: 9. Click Next. 10. Select the e-mail protocol you want to use. 11. Enter the hostname of your e-mail server in the Incoming Server field: 12. Click Next. 13. In the User Name field, enter the complete e-mail address: 14. Click Next. 15. In the Account Name field, enter an arbitrary name for this account. Use this name to distinguish this account from any others that the user might have. 16. Click Next. The Account Wizard displays the settings that are entered. If any of the settings are incorrect, click Back to return to the previous steps. 17. Click Finish. The new account now appears in the Mail & Newsgroups Account Settings window. 18. In the account list, select Outgoing Server (SMTP). The Outgoing Server (SMTP) Settings screen appears: 19. In the Server Name field, enter the hostname of the SMTP server: When configuring your POP3 logon, be sure to use the complete email address (). In order to send SMTP authentication then enter your email account () and your password. Passwords are case 20. Select User name and password. 21. In the User Name field, enter the complete e-mail address: 22. Click OK.
Configuring E-mail in Incredimail Note: If you would like to view an online tutorial of the Incredimail Configuration process, click here, then select the Incredimail menu choice. 1. Start Incredimail. 2. Select the Tools menu. 3. Select the Accounts... menu item. 4. Select account. 5. Click the Properties button. 6. The pop3.direcway.com Properties dialog opens. 7. Select the Account Name text box. 8. Change the Account Name to HughesNet User. 9. Select the Display Name text box. 10. Change the Display Name to HughesNet User. 11. Select the Email Address text box. 12. Change user@direcway.com to: where user is your email name. 13. Select the Servers tab. 14. Select the Incoming mail server text box. 15. Change pop3.direcway.com to: 16. Select the Outgoing mail server text box. 17. Change smtp.direcway.com to: 18. Select the Username text box. 19. Change the username to: where user is your email name. 20. Select the Password text box. 21. Enter password. 22. Select the My server requires authentication check box. 23. Click the OK button. 24. Click the Close button. Your settings are complete! If you have any questions, feel free to contact us: Montana Satellite & Wireless 825 Helena Flats Road #205 Kalispell, Montana 59901 www.montanasatellite.com Phone/Fax: 888-608-2299