IBM 7206 External Tape Drive Model VX3 delivers increased storage capacity

Hardware Announcement April 11, 2006 IBM 7206 External Tape Drive Model VX3 delivers increased storage capacity Overview The IBM 7206 Model VX3 External Tape Drive is a stand-alone, SCSI, VXA-320 streaming tape drive that attaches externally to the IBM eserver pseries and iseries families of workstations and servers. Key features The IBM 7206 Model VX3 External Tape Drive writes data to tape using a Discrete Packet Format. The tape drive provides a media capacity of up to 160 GB (320 GB with 2:1 compression) of data storage per cartridge and a sustained data transfer rate of up to 12.0 MB per second (24.0 MB per second with 2:1 compression). Benefits The 7206 Model VX3 is downward read and write compatible with media used in VXA-2 tape drives installed internally on iseries and pseries servers as well as with the 7206 Model VX2 external tape drive. The increased capacity of the 7206 Model VX3 media can make it a cost-effective solution for your save, restore, and archiving functions. The 7206 Model VX3 provides: Media storage capacity of up to 160 GB (320 GB with compression), nearly two times the media capacity of the IBM 7206 Model VX2, reducing the number of tape cartridges needed A higher data rate than the 7206 Model VX2 Packet formatted data, variable speed operation, and scanning of data packets multiple times in one scan Reading and writing of VXA-2 and VXA-320 format on X media data cartridges Key prerequisites IBM pseries AIX V5.3.0, or later Linux -- SUSE Enterprise Server 9 for POWER, or later -- Red Hat Enterprise AS for POWER V3, or later IBM iseries OS/400 -- The 7206 Model VX3 requires a supported i5 or iseries system processor with IBM OS/400 V5R3, or later. -- Adapters, including the PCI Magnetic Media Controllers (features 2718 and 2768), the PCI Ultra Tape Controller (feature 5702), or the PCI-X Tape/DASD Controller (features 5705, 5712, and 5715) are offered on i5 and iseries servers. The configurator will determine the correct controller to be used for your specific host system. Linux -- SUSE Enterprise Server 9 for POWER, or later -- Red Hat Enterprise AS for POWER V3, or later Planned availability date May 12, 2006 At a glance The IBM 7206 External Tape Drive Model VX3 is a large-capacity tape drive that writes data to tape using a Discrete Packet Format. The 7206 Model VX3 is designed to provide: Increased tape capacity of up to two times that of the 7206 Model VX2 up to 160 GB physical data storage per cartridge (320 GB with 2:1 compression) A higher data transfer rate up to 12.0 MB per second Data formatted in packets with variable speed scan Multiple data packet scan in one single tape pass For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: YE001 This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com. IBM United States IBM is a registered trademark of International Business Machines Corporation. 106-254

Description The IBM 7206 Model VX3 External Tape Drive is an externally attached tape drive for pseries and iseries workstations and servers. The VXA-320 streaming tape drive writes data to tape cartridges using a Discrete Packet Format and features data compression that provides an effective physical data capacity of up to 320 GB (using 2:1 compression) as well as a data transfer rate of up to 12.0 MB per second. With up to two times the capacity and a higher data rate of the 7206 Model VX2, your productivity can be enhanced. The 7206 Model VX3 is designed to provide a more cost effective solution for save, restore, and archiving functions than previous models. Note: Although the 7206 Model VX3 can give you high tape performance, other components of the system may limit the actual performance achieved. In addition, the compression technology used in the tape drive can double the amount of data that can be stored on the media. However, the actual degree of compression achieved is highly sensitive to the characteristics of the data that is being compressed. Product positioning The higher capacity 7206 Model VX3 is a replacement for the older 7206 Model VX2 tape drive. With its higher capacity, it is also an excellent replacement for older IBM 1/4-inch drives (7207) and other competitive products where this capability is needed. If you have to back up larger amounts of data or need a higher performance tape drive, you might consider the following: IBM 7212 Model 312 VXA-2 Tape Autoloader IBM 7212 Model 102 with Half-High LTO-2 Tape Drive feature IBM 3580 LTO Ultrium Tape Drive IBM 3581 LTO Ultrium Tape Autoloader IBM 3584 UltraScalable LTO Tape Library IBM Magstar MP 3575 Tape Library Dataserver IBM Magstar 3590 Tape Subsystem IBM 3490 Enhanced Capability Magnetic Tape Subsystem Magstar 3494 Tape Library Business Partner information If you are a Direct Reseller - System Reseller acquiring products from IBM, you may link directly to Business Partner information for this announcement. A PartnerWorld ID and password are required (use IBM ID). BP Attachment for Announcement Letter 106-254 https://www.ibm.com/partnerworld/ mem/sla.jsp?num=106-254 Trademarks iseries and POWER are trademarks of International Business Machines Corporation in the United States or other countries or both. eserver, the e-business logo, pseries, AIX, OS/400, and Magstar are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Linux is a trademark of Linus Torvalds in the United States, other countries or both. Other company, product, and service names may be trademarks or service marks of others. 106-254 -2-

IBM United States Announcement Supplemental Information April 11, 2006 Publications The following publications are shipped with the product. Additional copies are available. To order, contact your IBM representative. Title IBM 7206 Model VX3 External Tape Drive Setup & Operator s Guide IBM 7206 Model VX3 External Tape Drive Service Guide External Device Safety Manual Order Number SA41-0065 SY44-0095 SA26-2004 The publications listed on the notification can be ordered by calling the Pubs Support Group in Raleigh at 800-879-2755, option 1. The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. A large number of publications are available online in various file formats, which can currently be downloaded free of charge. Services IBM Integrated Technology Services IBM services include business consulting, outsourcing, hosting services, applications, and other technology management. These services help you learn about, plan, install, manage, or optimize your IT infrastructure to be an On Demand Business. They can help you integrate your high-speed networks, storage systems, application servers, wireless protocols, and an array of platforms, middleware, and communications software for IBM and many non-ibm offerings. IBM is your one-stop shop for IT support needs. For details on available services, contact your IBM representative or visit http://www.ibm.com/services/ For details on available IBM Business Continuity and Recovery Services, contact your IBM representative or visit http://www.ibm.com/services/continuity For details on education offerings related to specific products, visit http://www.ibm.com/services/learning/index.html Select your country, and then select the product as the category. Technical information Specified operating environment Physical specifications Width: 250 mm ( 9.8 in) Depth: 275 mm (10.8 in) Height: 55 mm ( 2.2 in) Weight: 3.4 kg ( 7.5 lbs) To assure installability and serviceability in non-ibm industry standard racks, review the installation planning information for any product specific installation requirements. Operating environment Temperature: 16 to 32 C (60 to 90 F) Relative humidity: 20% to 80% (non-condensing) Wet bulb: 26.0 C (79 F) Electrical power: 0.03 kva at 120 V ac (typical) Power factor: 0.8 to 0.9 Power supply: 100 to 125 V ac or 200 to 240 V ac at 50 to 60 Hz Btu average: 42 Btu/hr (20 watts at 240 V ac) Maximum altitude: 2,135 m (7,000 ft) Noise level LwAd: 5.4 bels (42 dba) operating 5.4 bels (42 dba) idle Hardware requirements p5 and pseries support of the 7206 Model VX3 The 7206 Model VX3 can be attached to p5 or pseries servers as listed below. The appropriate small computer system interface (SCSI) cables must be selected. For cabling information, refer to the Cable orders section. The 7206 Model VX3 External VXA-320 Tape Drive is supported for attachment to the PCI Dual Channel Ultra3 SCSI Adapter (#6203), when used on the following p5 and pseries server models: pseries 630 (7028-6C4, 6E4) pseries 690 (7040-681) through the (7040-61D) I/O drawer pseries 9114-275 p5 9117-570 p5 9119-590 p5 9119-595 PCI Single-Ended Ultra SCSI Adapter (#6206), used on the following pseries models: pseries 630 (7028-6C4), pseries 630 (7028-6E4) pseries 690 (7040-681) through the (7040-61D) I/O drawer This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com. IBM United States IBM is a registered trademark of International Business Machines Corporation. 106-254

Integrated Ultra3 SCSI Adapter (LVD with VHDCI connector), when used on the following pseries models: pseries 630 (7028-6C4, 6E4) pseries p615 (7029-6C3, 6E3) PCI-X Dual Channel ULTRA320 SCSI Adapters (#5703 and 5712), when used on the following pseries models: pseries 630 (7028-6C4, 6E4) through the 7311-D20 I/O Drawer pseries 615 (7029-6C3,6E3) p5 9110-510 p5 9111-520 p5 9113-550 pseries 9114-275 p5 9115-505 p5 9117-570 p5 9124-720 PCI-X Dual Channel ULTRA320 SCSI Adapters (#5710 and #5711), when used on the following p5 and pseries models: pseries 630 (7028-6C4, 6E4) through the 7311-D10 I/O Drawer pseries 690 (7040-681) through the 7040-61D I/O Drawer p5 9118-575 p5 9119-590 p5 9119-595 PCI-X Dual Channel ULTRA320 SCSI Adaptors (#1912 and #1974), when used on the following p5 Server models: p5 9111-520 p5 9115-505 p5 9123-705 p5 9123-710 Software requirements pseries AIX V5.3.0, or later Linux -- SUSE Enterprise Server 9 for POWER, or later -- Red Hat Enterprise AS for POWER V3, or later iseries OS/400 -- The 7206 Model VX3 requires a supported i5 or iseries system processor with IBM OS/400 V5R3, or later. -- Adapters, including the PCI Magnetic Media Controllers (features 2718 and 2768), the PCI Ultra Tape Controller (feature 5702), or the PCI-X Tape/DASD Controller (features 5705, 5712, and 5715) are offered on i5 and iseries servers. The configurator will determine the correct controller to be used for your specific host system. Linux -- SUSE Enterprise Server 9 for POWER, or later -- Red Hat Enterprise AS for POWER V3, or later compatible with 4mm tape cartridges written by prior 7206 Models 001, 005, 110, or 220. Limitations: The IBM 7206 Model VX3 is designed to operate in the horizontal position. For Low Voltage Differential (LVD) operation, all devices on the SCSI bus must be LVD. Planning information Customer responsibilities: The 7206 Model VX3 is designated as customer setup. Customer setup, operation, and service publications are available. Cable orders: One SCSI cable must be specified on the initial plant order. The following table shows the various SCSI cable feature numbers that can be ordered depending on the host system adapter to which the 7206-VX3 will be attached. SCSI cable pseries SCSI Cable Feature adapter feature length plant both Integrated ULTRA, 0.5 m 9733 5303 6206 0.7 m 9751 5301 1.5 m 9750 5300 2.5 m 9752 5302 Integrated ULTRA2, 0.5 m 9765 5600 Integrated ULTRA3, 1.5 m 9761 5601 6203 2.5 m 9762 5602 4.5 m 9764 5604 10.0 m 9760 5610 iseries SCSI Cable Feature adapter feature length plant both 2718, 2768 1.5 m 9750 5300 0.7 m 9751 5301 2.5 m 9752 5302 0.5 m 9733 5303 5.0 m 9755 5305 10.0 m 9756 5310 5702, 5705 0.5 m 9765 5600 5712 1.5 m 9761 5601 2.5 m 9762 5602 4.5 m* 9764 5604 10.0 m* 9760 5610 * 4.5 m and 10.0 m cable can be used only if the 7206-VX3 is the only device on the bus. Refer to the Specify Features section of the Sales Manual for a detailed description of the above features. Packaging Number of Product Ship group boxes 7206 Model VX3 Tape drive, Setup and Operator Guide, 1 Service Guide, warranty and safety information, power cable, one data cartridge, one cleaning cartridge, one test cartridge, SCSI terminator, and specified SCSI cable. Supplies The part numbers for additional VXA X cartridges are: Compatibility: The 7206 Model VX3 writes data using a Discrete Packet Format on tape cartridges that are not 106-254 -2-

IBM part number Supply item ------- ---------------------------- 24R2134 VXA X6 40 GB Data Cartridge 24R2135 VXA X Test Cartridge 24R2136 VXA X10 80 GB Data Cartridge 24R2137 VXA X23 160 GB Data Cartridge 24R2138 VXA X Cleaning Cartridge For additional tape data or cleaning cartridges, refer to http://www.storage.ibm.com/media For additional media supplies, refer to http://www.storage.ibm.com/media To purchase IBM-branded media and media supplies, call 888-IBM-MEDIA (426-6334) in the U.S. and Canada, or go to http://www.storage.ibm.com/media Security, auditability, and control This product uses the security and auditability features of the host hardware, software, and application software. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Terms and conditions Volume orders: Contact your IBM representative. IBM Global Financing: Yes Warranty period: One year; media warranted separately. Warranty service If required, IBM provides repair or exchange service depending on the types of warranty service specified for the machine. IBM will attempt to resolve your problem over the telephone, or electronically via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. If applicable to your product, parts considered Customer Replaceable Units (CRUs) will be provided as part of the machine s standard warranty service. Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM s normal service area. Contact your local IBM representative or your reseller for country and location specific information. This product is covered by the following types of service. On-site service IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. 24 hours per day, 7 days a week, same-day response If your problem can be resolved with a CRU (for example, tape drive feature), IBM may ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM at any time on your request. Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies in the materials shipped with a replacement CRU whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container are shipped with the replacement CRU, and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement. Warranty service upgrades and Maintenance Service options Warranty service upgrades During the warranty period, warranty service upgrades provide an enhanced level of on-site service for an additional charge. A warranty service upgrade must be purchased during the warranty period and is for a fixed term (duration). It is not refundable or transferable and may not be prorated. If required, IBM will provide the warranty service upgrade enhanced level of on-site service acquired by the customer. Service levels are response time objectives and are not guaranteed. IBM will attempt to resolve your problem over the telephone or electronically by access to an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. On-site service IBM will repair the failing machine at your location and verify its operation. You must provide a suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. The following service selections are available as warranty upgrades for your machine type. Option 1: IOR, 3 year, 24 hours a day, 7 days a week, 4-hour response Option 2: IOR, 24 hours a day, 7 days a week, 2-hour response CRUs may be provided as part of the Machine s standard warranty CRU Service except that you may install a CRU yourself or request IBM installation, at no additional charge, under one of the on-site service levels specified above. For additional information on the CRU service, see warranty information. Maintenance services If required, IBM provides repair or exchange service depending on the types of maintenance service specified for the Machine. IBM will attempt to resolve your problem over the telephone or electronically, via an IBM Web site. You must follow the problem determination and resolution procedures that IBM specifies. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of maintenance service may not be available in all worldwide locations. Additional charges may apply outside IBM s normal service area. Contact your local IBM representative or your reseller for country and location specific information. The following service -3-106-254

selections are available as maintenance options for your machine type. Prices On-site service IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. IOR, 9 hours per day, Monday through Friday, excluding holidays, next-business-day response IOR, 9 hours per day, Monday through Friday, excluding holidays, 4-hour average response IOR, 24 hours per day, 7 days a week, 4-hour average response IOR, 24 hours per day, 7 days a week, 2-hour average response CRUs If your problem can be resolved with a CRU (for example, tape drive feature), and depending upon the maintenance service offerings in your geography, IBM will ship the CRU to you for you to install. CRU information and replacement instructions are shipped with your machine and are available from IBM upon your request. Based upon availability, CRUs will be shipped for next business day delivery. IBM specifies, in the materials shipped with a replacement CRU, whether a defective CRU must be returned to IBM. When return is required, (1) return instructions and a container is shipped with the replacement CRU and (2) you may be charged for the replacement CRU if IBM does not receive the defective CRU within 30 days of your receipt of the replacement. CRUs may be provided as part of the machine s standard maintenance service except that you may install a CRU yourself or request IBM installation, at no additional charge, under any of the on-site service levels specified above. Usage plan machine: No IBM hourly service rate classification: Two When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order. Field-installable features: Yes Model conversions: No Machine installation Customer setup: Customers are responsible for installation according to the instructions IBM provides with the Machine. Graduated Program License charges apply: No. This product does not contain Licensed Internal Code or Licensed Machine Code. Educational allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance. Machine Feature Purchase Description type/model number price MMC ------------------------- ---------- ------- -------- ------ VX3 External Tape Drive 7206-VX3 $2,695 $ 40 VXA X Test Cartridge 2508 47 NC VXA X Cleaning Cartridge 2519 36 NC VXA X23 160 GB Data Cartridge 2531 85 NC VXA X10 80 GB Data Cartridge 2532 69 NC VXA X6 40 GB Data Cartridge 2533 42 NC Rack Power Cord, Single 5060 29 NC Rack Power Cord, Bifurcated 5061 59 NC Terminator, LVD/SE 5097 75 NC Cable, 1.5 m-hd68/hd68 5300 155 NC Cable, 0.7 m-hd68/hd68 5301 149 NC Cable, 2.5 m-hd68/hd68 5302 174 NC Cable, 0.5 m-hd68/hd68 5303 130 NC Cable, 5 m-hd68/hd68 5305 199 NC Cable, 10 m-hd68/hd68 5310 249 NC Cable, 0.5 m-vhdci/hd68 5600 145 NC Cable, 1.5 m-vhdci/hd68 5601 155 NC Cable, 2.5 m-vhdci/hd68 5602 165 NC Cable, 4.5 m-vhdci/hd68 5604 195 NC Cable, 10 m-vhdci/hd68 5610 250 NC Rack Mount Kit 8723 120 NC English Publication Group 9300 NC NC French Publication Group 9703 NC NC German Publication Group 9704 NC NC Spanish Publication Group 9708 NC NC Japanese Publication Group 9714 NC NC Chinese Publication Group 9722 NC NC Cable, 0.5 m-hd68/hd68 9733 NC NC Cable, 1.5 m-hd68/hd68 9750 NC NC Cable, 0.7 m-hd68/hd68 9751 NC NC Cable,2.5 m-hd68/hd68 9752 NC NC Cable, 5 m-hd68/hd68 9755 NC NC Cable, 10 m-hd68/hd68 9756 NC NC Cable, 10 m-vhdci/hd68 9760 NC NC Cable, 1.5 m-vhdci/hd68 9761 NC NC Cable, 2.5 m-vhdci/hd68 9762 NC NC Cable, 4.5 m-vhdci/hd68 9764 NC NC Cable, 0.5 m-vhdci/hd68 9765 NC NC 2.7 m (9 ft) Line cords: 125V, 15A, U.S./Canada 9800 NC NC 250V, 16A (AC), France 9820 NC NC 250V, 11A, Denmark 9821 NC NC 250V, 13A, United Kingdom 9825 NC NC 250V, 6-16A, Israel 9827 NC NC 250V, 10A, Switzerland 9828 NC NC 250V, 16A, South Africa 9829 NC NC 250V, 10 and 16A, Italy 9830 NC NC 250V, 10A, Australia 9831 NC NC 250V, 15A, U.S./Canada 9833 NC NC 250V, 10A, Uruguay 9834 NC NC 250V, 6A, China (PRC) 9840 NC NC 125V, 10A, Taiwan 9841 NC NC Rack Power Cord, Single 9860 NC NC Rack Power Cord, Bifurcated 9861 NC NC 1.8 m (6 ft) Line cord: 9986 NC NC 125V, 15A, Chicago/Canada NC - No Charge MMC - Monthly Maintenance Charge There are no field MES removals. Annual minimum maintenance charges: For ServiceElect (ESA) Maintenance Service Charges, contact IBM Global Services at 888-IBM-4343 (426-4343). IBM Global Financing: IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Our offerings include financing for IT acquisition, including hardware, software, and services, both from IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit the Web at 106-254 -4-

http://www.ibm.com/financing IBM Global Financing offerings are provided through IBM Credit LLC in the United States and other IBM subsidiaries and divisions worldwide to qualified commercial and government customers. Rates are based on a customer s credit rating, financing terms, offering type, equipment type, and options, and may vary by country. Other restrictions may apply. Rates and offerings are subject to change, extension, or withdrawal without notice. Financing solutions from IBM Global Financing can help you stretch your budget and affordably acquire the new product. But beyond the initial acquisition, our end-to-end approach to IT management can also help keep your technologies current, reduce costs, minimize risk, and preserve your ability to make flexible equipment decisions throughout the entire technology life cycle. For more financing information, please visit http://www.ibm.com/financing Order now To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968). Phone: 800-IBM-CALL (426-2255) Fax: 800-2IBM-FAX (242-6329) Internet: callserv@ca.ibm.com Mail: IBM Americas Call Centers Dept. Teleweb Customer Support, 9th floor 105 Moatfield Drive North York, Ontario Canada M3B 3R1 Reference: YE001 The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products. Note: Shipments will begin after the planned availability date. Trademarks POWER and iseries are trademarks of International Business Machines Corporation in the United States or other countries or both. pseries, AIX, and OS/400 are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Linux is a trademark of Linus Torvalds in the United States, other countries or both. Other company, product, and service names may be trademarks or service marks of others. -5-106-254