STUMP GRINDER SG30-30cc honda PARTS manual PN: 23 Rev 200 Companion to 23 SN Range: 06 - A03
Before You Begin DEAR ECHO BEAR CAT CUSTOMER Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear Cat line is designed, tested, and manufactured to give years of dependable performance. To keep your machine operating at peak efficiency, it is necessary to adjust it correctly and make regular inspections. The following pages will assist you in the operation and maintenance of your machine. Please read and understand this manual before operating your machine. If you have any questions or comments about this manual, please call us toll-free at -00-2-335. If you have any questions or problems with your machine, please call or write your local authorized ECHO Bear Cat Dealer. This document is based on information available at the time of its publication. ECHO Bear Cat is continually making improvements and developing new equipment. In doing so, we reserve the right to make changes or add improvements to our product without obligation for equipment previously sold. PLEASE SEND US YOUR WARRANTY CARD A warranty card is included in your owner's kit packaged with your machine. Please take the time to fill in the information requested on the card. When you send your completed card to us, we will register your machine and start your coverage under our limited warranty. FOR MACHINE SERVICE OR PARTS: For service assistance, contact your nearest authorized ECHO Bear Cat dealer or the factory. For parts, contact your authorized dealer. The parts manual for your machine is available at http://bearcatproducts.com/main/support/ index_html. Your dealer will need to know the serial number of your machine to provide the most efficient service. See below for information on how to identify and record the serial number for your machine. FOR ENGINE SERVICE OR PARTS: For engine service or parts, contact your nearest authorized engine dealer. ECHO Bear Cat does not handle any parts, repairs or warranties for engines. ORDERING PARTS Only genuine ECHO Bear Cat replacement parts should be used to repair the machine. Replacement parts manufactured by others could present safety hazards, even though they may fit on this machine. Replacement parts are available from your ECHO Bear Cat dealer. Provide the following when ordering parts: The SERIAL NUMBER of your machine. The PART NUMBER of the part. The PART DESCRIPTION. The QUANTITY needed. SERIAL NUMBER LOCATION Please record the serial number in the space provided and on the warranty and registration card. ManuFaCTuREd By CRaRy InduSTRIES WEST FaRgo, north dakota 50 u.s.a. SERIal number xxxxxx ManuFaCTuREd In u.s.a. SERIAL NUMBER How to contact ECHO Bear Cat address Phone e-mail hours 23 NW 2th Street P.O. Box West Fargo, ND 50 00-2-335 0-22-5520 Fax: 0-22-522 opesales@crary.com service@crary.com Monday - Friday, am to 5 pm Central Time 200, Crary industries, all rights reserved. produced and printed in the u.s.a.
TABLE OF CONTENTS DESCRIPTION PAGE SPINDLE ASSEMBLY... 2 Serial Number Range: 060 - A03 SPINDLE ASSEMBLY... Serial Number Range: 06-063 HANDLE & WHEEL ASSY... 6 THROTTLE CABLE ASSY... ENGINE ASSEMBLY... 0 DECALS... SERVICE PARTS & OPTIONS... 2 Page
SPINDLE ASSEMBLY Serial Number Range: 060 - A03 2/0 3 5 2 6 22 0 23 5 20 25 2 3 2 26 2 2 2 30 6 33 2 3 32 Page 2
2/0 Serial Number Range: 060 - A03 SPINDLE ASSEMBLY SPINDLE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 2363 SHEAVE, 3V. 5X2-SH 2 2 230 BEARING, BALL 2 3 500 BOLT, 3/ NC X 3 HEX HD 503 WASHER, 3/ FLAT 3 5 50 NUT, 3/ CENTERLOCK 6 52 BOLT, 5/6 X 3-/2 HEX 53 BOLT, /2 X 3/ NF 5250 WASHER, 5/6 FLAT 32 5356 NUT, 5/6 NYLOCK 26 0 5365 KEY, / X SQ 2 53 NUT, 3/ NYLOCK 2 53 BOLT, 5/6 X -/ CRG 3 503 BOLT, 5/6 X -3/ HEX 63 PULLEY, 3-/ FLAT IDLER 5 65 BUSHING,.0 SH 2 6 66 TOOTH, STRAIGHT STUMPGRINDER 66 TOOTH, CURVED STUMPGRINDER 62 SPRING, 3/ OD EXTENSION 6253 TUBE, 3/ IDLER 20 623 SPACER, IDLER PIVOT 2 02 IDLER ARM WELDMENT 22 035 TUBE, PIVOT 23 05 SPACER,.5 X. 2 62-2 PLATE, COVER STUMPGRINDER HEAD 25 2-35 STUMPGRINDER FRAME WELDMENT 26 625-2 SPINDLE HUB WELDMENT 2 6253-00 SPINDLE, SG 2 BLADE 2 625-00 TUB, SPACER -3/ X.520 2 2 SPACER, -3/ X /2 30 625-2 plate, disk stumpgrinder head 3 505 BOLT, 3/ X -3/ CRG 6 32 562-00 WASHER, /2 GR SAE FLAT 33 6250-2 PLATE, SPACER STUMPGRINDER HEAD Page 3
SPINDLE ASSEMBLY Serial Number Range: 06-063 2/0 6 3 5 2 22 23 0 5 20 2 2 26 3 25 2 2 6 2 2 2 Page
2/0 Serial Number Range: 06-063 SPINDLE ASSEMBLY SPINDLE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 2363 SHEAVE, 3V. 5X2-SH 2 2 230 BEARING, BALL 2 3 500 BOLT, 3/ NC X 3 HEX HD 503 WASHER, 3/ FLAT 3 5 50 NUT, 3/ CENTERLOCK 6 52 BOLT, 5/6 X 3-/2 HEX 5 BOLT, 3/ NC X -3/ HEX HD 5250 WASHER, 5/6 FLAT 32 5356 NUT, 5/6 NYLOCK 26 0 5365 KEY, / X SQ 2 53 NUT, 3/ NYLOCK 2 53 BOLT, 5/6 X -/ CRG 3 503 BOLT, 5/6 X -3/ HEX 63 PULLEY, 3-/ FLAT IDLER 5 65 BUSHING,.0 SH 2 6 66 TOOTH, STRAIGHT STUMPGRINDER 2 66 TOOTH, CURVED STUMPGRINDER 2 62 SPRING, 3/ OD EXTENSION 6253 TUBE, 3/ IDLER 20 623 SPACER, IDLER PIVOT 2 02 IDLER ARM WELDMENT 22 035 TUBE, PIVOT 23 05 SPACER,.5 X. 2 BOTTOM DISK, STUMPGRINDER 25 2-35 STUMPGRINDER FRAME WELDMENT 26 20-2 SPINDLE HUB WELDMENT 2 2-2 STUMPGRINDER SPINDLE WELDMENT 2 2 SPACER, -3/ X.52 2 2 SPACER, -3/ X /2 Page 5
HANDLE & WHEEL ASSY. 2/0 5 2 0 5 3 6 20 2 6 3 Page 6
2/0 HANDLE & WHEEL ASSY. HANDLE AND WHEEL ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 5003 BOLT, 5/6 X 3/ HEX HD 2 500 WASHER, 5/6 FENDER 3 50 WASHER, /2 SAE FLAT 52 WASHER, 5/ SAE FLAT 2 5 5 BOLT, / X 2-/ HEX HD 6 52 BOLT, 5/6 X HEX HD 5250 WASHER, 5/6 FLAT 32 530 BOLT, 5/6 X CRG 532 KNOB, 5/6 SPOUT 2 0 5356 NUT, 5/6 NYLOCK 2 536 CLIP, HAIRPIN 3 2 2533 DECAL, STUMPGRINDER INFO 3 66 TIRE AND WHEEL 2 520 SPRING,.555 OD X 2.5 LG 5 20 HANDLE BAR, UPPER 6 20 FLAP, STUMPGRINDER 2 62 HANDLE BAR, LOWER 26-2 BRACE, HANDLEBAR 22-2 WHEEL BRAKE WELDMENT 20 223-2 STRIP, HANDLEBAR SUPPORT Page
THROTTLE CABLE ASSY. 2/0 6 3 0 5 2 6 2 3 5 Page
2/0 throttle cable assy. THROTTLE CABLE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 20 SWITCH, ENGINE KILL 2-00 WIRE ASSY, ENGINE KILL 3 5003 BOLT, 5/6 X 3/ HEX HD 50 NUT, 5/6 CENTERLOCK 2 5 5 NUT, 5/6 CENTERLOCK 6 5 BOLT, / X 2-/ HEX HD 522 BOLT, 5/6 X -/2 HEX 5356 NUT, 5/6 NYLOCK 26 56 WASHER, 5/6 SAE FLAT 2 0 623 CONTROL, THROTTLE 66 CABLE, STUMPGRINDER 2 320 STRAP, NYLON TIE 3 02 WELDMENT, TOP BALE 2 3 SCREEN, DEBRIS 5 3 CLAMP, SCREEN 3 6 0 GUARD, / WIRE 220-2 STRIP, SWITCH MOUNT 22-2 BOTTOM BALE WELDMENT 52-00 WASHER, 5/6 EXT TOOTH ZP 5 Page
ENGINE ASSEMBLY 2/0 2 3 3 6 2 5 0 ENGINE ASSEMBLY ITEM PART NUMBER DESCRIPTION qty 2363 SHEAVE, 3V. 5X2-SH 2 2 236 ENGINE, HP HONDA 3 2365 BELT, 3V X 530 DOUBLE BANDED 5003 BOLT, 5/6 X 3/ HEX HD 5 50 BOLT, 5/6 X 2 HEX HD 2 6 553 NUT, 5/6 HEX 2 5250 WASHER, 5/6 FLAT 32 5356 NUT, 5/6 NYLOCK 26 5365 KEY, / X SQ 2 0 56 BOLT, 5/6 X -/ NF HEX 2 55 SCREW, 5/6 X 3 SQ HD SET 2 65 BUSHING,.0 SH 2 3 202-35 PLATE, ENGINE MOUNT 203-35 COVER, TOP STUMP GRINDER Page 0
2/0 DECALS 5 6 2 0 3 5 DECALS ITEM PART NUMBER DESCRIPTION QTY 20 DECAL, SG CONTROL 2 250 DECAL, MODEL 3 (SUPERCEDED BY - 00) -00 DECAL, MODEL SG30 3 2533 DECAL, STUMPGRINDER INFO 623 DECAL, THROTTLE CONTROL 5 225 DECAL, GRINDER DANGER 2 6 22 DECAL, PROTECTION 3 DECAL, SMALL BEARCAT 666-00 DECAL, SMALL BEARCAT (EURO MODELS) 2-00 DECAL, MULTILIGUAL MANUAL 0-00 DECAL, DB 0 653 DECAL, CE Page
SERVICE PARTS & OPTIONS 2/0 BLADE TOOTH REPLACEMENT KIT (5) PART NUMBER DESCRIPTION QTY 66 STUMP CUTTER TEETH, STRAIGHT 2 66 STUMP CUTTER TEETH, RH 2 5 BOLT, 3/ X -3/ GR5 HCS ZP 50 NUT, 3/ CENTERLOCK ZP 665 INSTRUCTIONS, CUTTER SHARPENING 2 BLADE TOOTH REPLACEMENT KIT (622-00) PART NUMBER DESCRIPTION QTY 66 STUMP CUTTER TEETH, STRAIGHT 66 STUMP CUTTER TEETH, RH 505 BOLT, 3/ X -3/ GR5 CARR BLT ZP 2 53 NUT, 3/ NE NYLOCK ZP 2 562-00 WASHER, /2 HI-STRENGTH SAE ZP 53 BOLT, /2-20 X 3/ GR5 HHCS NF ZP 2 BLADE RETRO FIT KIT (603-00) (SUPERSEDES RETRO FIT KIT 6256-00) PART NUMBER DESCRIPTION QTY 60-00 ASSY., RETROFIT SG 2 BLADE CUT 605-00 INSTRUCTIONS, SG 2 TOOTH CUTTER KIT 2 BLADE CUTTER UPGRADE KIT (606-00) PART NUMBER DESCRIPTION QTY 505 BOLT, 3/ X 3/" CRG 2 53 NUT, 3/" NYLOCK 2 6-2 PLATE, COVER STUMP GRINDER HEAD 6-00 PLATE, SPACER STUMP GRINDER HEAD 2 600-2 PLATE, DISK STUMP GRINDER HEAD 60-00 INSTRUCTIONS, SG30 CUTTER UPGRADE Page 2
ECHO Bear Cat 23 NW 2th Street, West Fargo, ND 50-0 Phone: 0.22.5520 Toll Free: 00.2.335 Fax: 0.22.522 E-mail: service@crary.com opesales@crary.com www.bearcatproducts.com