omponents 736 Marilla Street Chatsworth!"# $%!"# N522 THRU N5267 Features Wide Voltage Range Available Glass Package High Temp Soldering: 260 C for Seconds At Terminals Marking : Cathode band and type number Lead Free Finish/Rohs Compliant (Note) ("P"Suffix designates Compliant. See ordering information) Moisture Sensitivity: Level Maximum Ratings Operating Temperature: -55 C to +50 C Storage Temperature: -55 C to +50 C 500 mwatt DC Power Dissipation Power Derating: 4.0mW/ C above 50 C Forward Voltage @ 0:. Volts 500 mw Zener Diode 2.4 to 75 Volts DO-35 Figure - Typical Capacitance 0 D pf At zero volts A B Cathode Mark At 2 Volts V R D 0 0 0 Typical Capacitance (pf) versus Zener voltage (V Z ) Figure 2 - Derating Curve V Z C 400 mw 0 DIMENSIONS INCHES MM DIM MIN MAX MIN MAX NOTE A ---.66 --- 4.2 B ---.079 --- 2.00 C ---.0 ---.52 D.000 --- 25.40 --- 0 50 0 50 Temperature C Power Dissipation (mw) - Versus - Temperature C Note:. Lead in Glass Exemption Applied, see EU Directive Annex 5. Revision: A /0/0 of 5
N522 thru N5267 ELECTRICAL CHARACTERISTICS @25 C M C C MCC PART NUMBER NOMINAL ZENER VOLTAGE V Z @ I ZT TEST CURRENT I ZT MAXIMUM ZENER IMPEDANCE B SUFFIX ONLY MAXIMUM REVERSE LEAKAGE CURRENT Z ZT @ I ZT Z ZK @I ZK = 0.25 I R @ V R OHMS OHMS µa % / C MAX. ZENER VOLTAGE TEMP COEFFICIENT B SUFFIX ONLY N522 2.4 30 0 0.0-0.085 N5222 2.5 30 250 0.0-0.085 N5223 2.7 30 300 75.0-0.080 N5224 2.8 30 400 75.0-0.080 N5225 3.0 29 600 50.0-0.075 N5226 3.3 28 600 25.0-0.070 N5227 3.6 24 700 5.0-0.065 N5228 3.9 23 900.0-0.060 N5229 4.3 22 00 5.0.0 ±0.055 N5230 4.7 9 900 5.0 2.0 ±0.030 N523 5. 7 600 5.0 2.0 ±0.030 N5232 5.6 600 5.0 3.0 +0.038 N5233 6.0 7.0 600 5.0 3.5 +0.038 N5234 6.2 7.0 00 5.0 4.0 +0.045 N5235 6.8 5.0 750 3.0 5.0 +0.050 N5236 7.5 6.0 500 3.0 6.0 +0.058 N5237 8.2 8.0 500 3.0 6.5 +0.062 N5238 8.7 8.0 600 3.0 6.5 +0.065 N5239 9. 600 3.0 7.0 +0.068 N5240 7 600 3.0 8.0 +0.075 N524 22 600 2.0 8.4 +0.076 N5242 2 30 600.0 9. +0.077 N5243 3 9.5 3 600 0.5 9.9 +0.079 N5244 4 9.0 5 600 0. +0.082 N5245 5 8.5 6 600 0. +0.082 N5246 6 7.8 7 600 0. 2 +0.083 N5247 7 7.4 9 600 0. 3 +0.084 N5248 8 7.0 2 600 0. 4 +0.085 N5249 9 6.6 23 600 0. 4 +0.086 N5250 6.2 25 600 0. 5 +0.086 N525 22 5.6 29 600 0. 7 +0.087 N5252 24 5.2 33 600 0. 8 +0.088 N5253 25 5.0 35 600 0. 9 +0.089 N5254 27 4.6 4 600 0. 2 +0.090 N5255 28 4.5 44 600 0. 2 +0.09 N5256 30 4.2 49 600 0. 23 +0.09 N5257 33 3.8 58 700 0. 25 +0.092 N5258 36 3.4 70 700 0. 27 +0.093 N5259 39 3.2 80 800 0. 30 +0.094 N5260 43 3.0 93 900 0. 33 +0.095 N526 47 2.7 5 00 0. 36 +0.095 N5262 5 2.5 25 0 0. 39 +0.096 N5263 56 2.2 50 300 0. 43 +0.096 N5264 60 2. 70 400 0. 46 +0.097 N5265 62 2.0 85 400 0. 47 +0.097 N5266 68.8 230 600 0. 52 +0.097 N5267 75.7 270 700 0. 56 +0.098 NOTE: Table as shown lists type numbers, which indicate a tolerance of ±% with guaranteed limits on only Vz, I R, and V F. Devices with guaranteed limits on all six parameters are indicated by suffix A for ±%, B for ±5%, C for ±2% tolerance NOTE2: The electrical characteristics are measured after allowing the device to stabilize for seconds. NOTE3: Temperature coefficient (á VZ). Test conditions for temperature coefficient are as follows: a. I ZT = 7.5, T I = 25 o C T 2 = 25 o C (N522 thru N5242) b. I ZT = Rated I ZT, T I = 25 o C, T 2 = 25 o C (N5243 thru N5267) Device to be temperature stabilized with current applied prior to reading breakdown voltage at the specified ambient temperature. Revision: A /0/0 2 of 5
N522 thru N5267 Figure Zener Voltage versus Zener Current V z = thru 6 Volts M C C T A =25 0. 0.0 2 3 4 5 6 7 8 9 2 3 4 5 6 I Z, ZENER CURRENT - Figure 2 Zener Voltage versus Zener Current V z =5 thru 30 Volts T A =25 0. 0.0 5 6 7 8 9 2 22 23 24 25 26 27 28 29 30 I Z, ZEBER CURRENT - Revision: A /0/0 3 of 5
N522 thru N5267 Figure 3 Zener Voltage versus Zener Current V z =30 thru 75 Volts TA=25 0. 0.0 30 35 40 45 50 55 60 65 70 75 80 85 90 95 0 5 I Z, ZENER CURRENT - Figure4 Thermal resistance from junction to ambient as a function of pulse duration 3 R th j-a (K/W) 2 = 0.75 0.50 0.33 0. 0. 0.05 0.02 0.0 0.00-2 3 4 5 t p (ms) Revision: A /0/0 4 of 5
Ordering Information : Device Part Number-TP Part Number-AP Part Number-BP Packing Tape&Reel: Kpcs/Reel Ammo Packing: 5Kpcs/Ammo Box Bulk: 0Kpcs/Carton ***IMPORTANT NOTICE*** Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications, enhancements, improvements, or other changes. Corp. does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights,nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Corp. and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. 5 of 5 Revision: A /0/0 3