CA IMS Tools CA RS 1308 Service List

CA IMS Tools 15.0 1 CA RS 1308 Service List Description Hiper 15.0 RO56983 DBOLOAD DD IS IGNORED RO56984 DBO API - NO MSG WHEN MISSING DFSURWF1 FROM JCL RO57259 S222 OR S522 IICOPY WAIT FOR DATABASE RO60225 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND RO60226 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND RO60282 DBO8304E LOGICAL CHILD RO60433 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT RO60434 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT RO60435 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT RO60552 REORG NUMBER NOT INCREMENTED FOR EMPTY PARTITION RO60640 IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS RO60814 FREE SPACE PCT FACTOR FOR PHDAM NOT HONORED FOR NON-PRIM DSG RO61229 IDI1200I VSAM STATUS - SEQ GET REQUEST REJECTED RO61231 INCORRECT DSID USED BY PHIDAM RECOVERY **HIPER** The CA RS 1308 service count for this release is 14

CA IMS Tools 14.0 2 CA RS 1308 Service List Description Hiper 14.0 RO59986 S222 OR S522 IICOPY WAIT FOR DATABASE RO60691 IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS The CA RS 1308 service count for this release is 2

CA IMS Tools 3 CA RS 1308 Service List for CIDAF00 FMID Service Description Hiper CIDAF00 RO60433 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT The CA RS 1308 service count for this FMID is 1

CA IMS Tools 4 CA RS 1308 Service List for CIDOE00 FMID Service Description Hiper CIDOE00 RO59986 S222 OR S522 IICOPY WAIT FOR DATABASE RO60691 IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS The CA RS 1308 service count for this FMID is 2

CA IMS Tools 5 CA RS 1308 Service List for CIDOF00 FMID Service Description Hiper CIDOF00 RO56983 DBOLOAD DD IS IGNORED RO56984 DBO API - NO MSG WHEN MISSING DFSURWF1 FROM JCL RO57259 S222 OR S522 IICOPY WAIT FOR DATABASE RO60225 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND RO60282 DBO8304E LOGICAL CHILD RO60434 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT RO60552 REORG NUMBER NOT INCREMENTED FOR EMPTY PARTITION RO60640 IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS RO60814 FREE SPACE PCT FACTOR FOR PHDAM NOT HONORED FOR NON-PRIM DSG RO61229 IDI1200I VSAM STATUS - SEQ GET REQUEST REJECTED RO61231 INCORRECT DSID USED BY PHIDAM RECOVERY **HIPER** The CA RS 1308 service count for this FMID is 11

CA IMS Tools 6 CA RS 1308 Service List for CITKF00 FMID Service Description Hiper CITKF00 RO60226 RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND RO60435 INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT The CA RS 1308 service count for this FMID is 2

CA IMS Tools 15.0 7 CA RS 1308 - PTF RO56983 15.0 RO56983 RO56983 M.C.S. ENTRIES = ++PTF (RO56983) DBOLOAD DD IS IGNORED CA Secondary Index Builder for IMS for z/os PROBLEM DESCRIPTION: CA Secondary Index Builder For FUNCTION=INDEXBUILD, FUNCTION=INDEXEXTRACT or FUNCTION=INDEXCREATE does not use the DBOLOAD DD when attempting to load the member defined in the DBD as the secondary index sparsing exit via the EXTRTN keyword. It only loads from STEPLIB or JOBLIB DD. The functions ends with RC=12 and message: DBO8310E UNABLE TO LOAD SPARSING EXIT MODULE "xxxxxxxx". CA Secondary Index Builder step will not complete successfully. The FUNCTION step completes with a RC=0012. The step will complete if the User Exit is moved to a STEPLIB or JOBLIB Library. PRODUCT(S) AFFECTED: CA Secondary Index Builder Release 14.0 CA Secondary Index Builder Release 15.0 CA Secondary Index Builder Release 16.0 SIB 118 (C)2013 CA. All Rights Reserved.R00721-I15-SP1 DESC(DBOLOAD DD IS IGNORED). FMID (CIDOF00) PRE ( RO38844 RO41847 RO51027 RO51153 RO56532 ) SUP ( RO38325 ZIBJ027 )

CA IMS Tools 15.0 8 CA RS 1308 - PTF RO56984 15.0 RO56984 RO56984 M.C.S. ENTRIES = ++PTF (RO56984) DBO API - NO MSG WHEN MISSING DFSURWF1 FROM JCL CA Database Organizer of IMS for Z/OS Problem Description: CA Database Organizer of IMS for Z/OS (DBO) does not issue an error message if the JCL is missing a DFSURWF1 DD for an API mode load of a database with logical relationships. The missing error message is DBO2923E THE DFSURWF1 FILE IS NEEDED BUT IS NOT ALLOCATED. Job step should end with RC=08. Symptoms: The DFSURWF1 DD is not in the JCL, but required to be. If omitted, the jobstep ends with RC=0. Impact: If the database requires a DFSURWF1 file for an API load and one is ommitted from the JCL, the completed job step may result in a broken database. Circumvention: None. Products Affected: CA Database Organizer 15.0 CA Database Organizer 14.0 PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 DBO 947 DBO UNLOAD S0C4 WITH LPCKRETRIEVE=YES CA Database Organizer of IMS for Z/OS Problem Description: CA Database Organizer of IMS for Z/OS (DBO) can intermittently end S0C4 when performing an UNLOAD with LPCKRETRIEVE=YES specified. This occurs if the segment data being written to is at the end of a block and the next page was not allocated. Symptoms: DBO1315E AN ABEND HAS BEEN INTERCEPTED - CLEANUP WILL BE ATTEMPTED. IDI1300E A S0C4 ABEND OCCURRED (MODULE DBOUDBR, SUFFIX(J), HEX OFFSET 1CAA, PSW-R02 ). NO EYECATCHER Impact: An UNLOAD job step with LPCKRETRIEVE=YES may end S0C4. Circumvention: None. Products Affected: CA Database Organizer 15.0 CA Database Organizer 14.0 PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 DBO 948 (C)2013 CA. All Rights Reserved.R00722-I15-SP1 DESC(DBO API - NO MSG WHEN MISSING DFSURWF1 FROM JCL). FMID (CIDOF00) PRE ( RO36813 RO37975 RO38430 RO38844 RO47140 RO48985 RO49005 RO49766 RO50242 RO50323 RO51027 RO52455 RO53255 ) SUP ( RO43389 RO47545 RO51901 ZIDJ142 ZIDJ143 )

CA IMS Tools 15.0 9 CA RS 1308 - PTF RO57259 15.0 RO57259 RO57259 M.C.S. ENTRIES = ++PTF (RO57259) S222 OR S522 IICOPY WAIT FOR DATABASE CA Database Copier for IMS for z/os PROBLEM DESCRIPTION: The CA Database Copier for IMS for z/os (DBCOPY) function Incremental Image Copy (IICOPY) will be cancelled by the operator (S222) or time out with a S522 abend while waiting to allocate one of the database datasets defined by the DBD. The function should not be allocating the database dataset because it is not required for IICOPY. The IICOPY step will wait for the database dataset until it is cancelled (S222) or times out with a S522 abend. The following messages will be found in the JESMSGS dataset: IKJ56225I DATA SET database_dataset_name ALREADY IN USE, TRY LATER+ &MIM1038I job_name1 CONTENTION WITH job_name2 OWNS EXCL ON lpar_name IKJ56225I DATA SET IS ALLOCATED TO ANOTHER JOB OR USER The DBOMSGS dataset will have the following message: DBON325E DYNAMIC ALLOCATION FAILED FOR "xxxxxxxx", S99ERROR=0210, S99INFO=0000 The IICOPY step fails. An IMS region has the database dataset allocated with DISP=OLD. The step will execute if the database is DBR'ed. PRODUCT(S) AFFECTED: Database Copier Release 14.0 Database Copier Release 15.0 DBCOPY 203 (C)2013 CA. All Rights Reserved.R00723-I15-SP1 DESC(S222 OR S522 IICOPY WAIT FOR DATABASE). FMID (CIDOF00) PRE ( RO36813 RO37975 RO38430 RO38844 RO42218 RO48985 RO49005 RO49413 RO51027 ) SUP ( RO37966 ZIKJ060 )

CA IMS Tools 15.0 10 CA RS 1308 - PTF RO60225 15.0 RO60225 RO60225 M.C.S. ENTRIES = ++PTF (RO60225) RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND CA Database Organizer for IMS for z/os. Problem Description: CA Database Organizer for IMS for Z/OS (DBO) abnormally ends when CKUPDATE=YES,STOP4094 is used in a reload where the database datasets are overridden. Symptoms: DBO Reload abnormally ends with: USER COMPLETION CODE=4094 TIME=15.03.34 SEQ=28686 CPU=0000 ASID=0447 PSW AT TIME OF ERROR 078D2000 B3A9D8C2 ILC 2 INTC 0D ACTIVE LOAD MODULE ADDRESS=33A00180 OFFSET=0009D742 NAME=IDIDBOJ DATA AT PSW 33A9D8BC - BF2A181F 0A0D4110 82584570 Impact: The database is not reloaded. Circumvention: Set CKUPDATE=NO to prevent checking the RECONs for allocation records for the overidden database datasets. Products Affected: CA Database Organizer 16.0 CA Database Organizer 15.0 DBO 960 (C)2013 CA. All Rights Reserved.R00750-I15-SP1 DESC(RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND). FMID (CIDOF00) PRE ( RO36813 RO37975 RO38430 RO38844 RO47140 RO48985 RO49005 RO50323 RO51027 RO56984 ) SUP ( RO51901 ZIDJ149 ) ++IF FMID(CITKF00) REQ(RO60226).

CA IMS Tools 15.0 11 CA RS 1308 - PTF RO60226 15.0 RO60226 RO60226 M.C.S. ENTRIES = ++PTF (RO60226) RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND CA Database Organizer for IMS for z/os. Problem Description: CA Database Organizer for IMS for Z/OS (DBO) abnormally ends when CKUPDATE=YES,STOP4094 is used in a reload where the database datasets are overridden. Symptoms: DBO Reload abnormally ends with: USER COMPLETION CODE=4094 TIME=15.03.34 SEQ=28686 CPU=0000 ASID=0447 PSW AT TIME OF ERROR 078D2000 B3A9D8C2 ILC 2 INTC 0D ACTIVE LOAD MODULE ADDRESS=33A00180 OFFSET=0009D742 NAME=IDIDBOJ DATA AT PSW 33A9D8BC - BF2A181F 0A0D4110 82584570 Impact: The database is not reloaded. Circumvention: Set CKUPDATE=NO to prevent checking the RECONs for allocation records for the overidden database datasets. Products Affected: CA Database Organizer 16.0 CA Database Organizer 15.0 DBO 960 (C)2013 CA. All Rights Reserved.R00750-I15-SP1 DESC(RELOAD CKUPDATE ON UNREG DB DS - U4094 ABEND). FMID (CITKF00) PRE ( RO36815 RO37977 RO38039 RO38432 RO41337 RO42479 RO43004 RO45879 RO47212 RO48008 RO48987 RO49007 RO51029 ) SUP ( RO53074 RO56016 ZIDJ149 ) ++IF FMID(CIDOF00) REQ(RO60225).

CA IMS Tools 15.0 12 CA RS 1308 - PTF RO60282 15.0 RO60282 RO60282 M.C.S. ENTRIES = ++PTF (RO60282) DBO8304E LOGICAL CHILD CA Secondary Index Builder for IMS for z/os PROBLEM DESCRIPTION: When invoking CA Secondary Index Builder for IMS for z/os (SIB) to build PSINDEXes and/or Primary Indexes for segments that are *also* logically-related (unidirectionally and/or bidirectionally) WITH ONE OR MORE EXTERNAL LR'D HALDBS, AND/OR RECURSIVELY PAIRED with one or more other segments within the same HALDB for which the PSINDEXes and/or Primary Indexes are being built, SIB can MISINTERPRET THE LR'D HALDBS AS BEING PSINDEXES. IN SUCH CASES, SIB will fail with error messages and will not build the PSINDEXes and/or Primary Indexes it was invoked to build. MESSAGE 'DBO8304E THE LOGICAL CHILD IN INDEX DBD "<LR'D HALDB NAME>" IS NOT FOR AN INDEX SOURCE SEGMENT.' IS ISSUED, FOLLOWED BY MESSAGE 'SIBH019E GENERAL INITIALIZATION ROUTINE FAILED.' (Other error messages can also be issued, instead of the above.) The SIB jobstep then terminates immediately with CC=12. The PSINDEXes and/or Primary Indexes are not built for the HALDB. There is no circumvention for rebuilding PSINDEXes when the indexed segments are also LR-paired with external HALDBs and/or recursively (internally) paired with other segments in the same HALDB. Primary Indexes and/or ILDSes will be rebuilt correctly as part of A DBO RELOAD (E.G. WHEN REORG'ING A HALDB). ALTERNATIVELY, THE IMS native PGM=DFSPREC0 utility can be executed to rebuild the Primary Indexes and/or ILDSes of a HALDB. PRODUCT(S) AFFECTED: Secondary Index Builder Release 14.0 Secondary Index Builder Release 15.0 SIB 119 (C)2013 CA. All Rights Reserved.R00753-I15-SP1 DESC(DBO8304E LOGICAL CHILD). FMID (CIDOF00) PRE ( RO37666 RO38844 RO38848 RO41280 RO41847 RO42221 RO43002 RO47303 RO48006 RO51027 RO51153 RO51532 RO56532 ) SUP ( RO38325 RO41039 RO56983 ZIBJ028 ) ++HOLD (RO60282) SYSTEM FMID(CIDOF00) REASON (DOC ) DATE (13175) COMMENT ( Product: Database Organizer Release: 15.0 Publication: The following new message will be issued if an INDEXCREATE is requested for a HALDB that contains no indexed segments, does contain logically related paired segments and BUILDILDS(Y ONLY) has not been coded in the control cards: 'SIBH053I NO PSINDEXES WERE FOUND IN "<HALDB name>" AND 'BUILDILDS=YES ONLY' WAS NOT SPECIFIED: THE ILDSES FOR THE LR'D PAIRED SEGMENTS WILL NOT BE BUILT.' This message is issued for information purposes only. ).

CA IMS Tools 15.0 13 CA RS 1308 - PTF RO60433 15.0 RO60433 RO60433 M.C.S. ENTRIES = ++PTF (RO60433) INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT PROBLEM DESCRIPTION: The Randomizer Analysis Program (RAP) component of Database Analyzer for IMS (DBA) can obtain an invalid partition number when calling a Partition Selection Exit routine for a HALDB. This can occur standalone or while using the HDSORT=Y option of Database Organizer for IMS (DBO) while reloading a HALDB. When a Partition Selection Exit is specified on a HALDB with the HDSORT=Y option specified, the following messages may be issued and no segments will be reloaded: DBOM505I LINK to HDSORT Complete, RC=0000. DBOI123W NO SEGMENTS WERE RELOADED. The database partitions will be formatted and empty. None. PRODUCT(S) AFFECTED: CA Database Analyzer Release 14.0 CA Database Analyzer Release 15.0 CA Database Analyzer Release 16.0 DBA 447 (C)2013 CA. All Rights Reserved.R00751-I15-SP1 DESC(INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT). FMID (CIDAF00) PRE ( RO36812 RO37974 RO38429 RO48984 RO49004 RO51026 ) SUP ( RO50908 ZA13925 ) ++IF FMID(CIDOF00) REQ(RO60434). ++IF FMID(CITKF00) REQ(RO60435).

CA IMS Tools 15.0 14 CA RS 1308 - PTF RO60434 15.0 RO60434 RO60434 M.C.S. ENTRIES = ++PTF (RO60434) INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT PROBLEM DESCRIPTION: The Randomizer Analysis Program (RAP) component of Database Analyzer for IMS (DBA) can obtain an invalid partition number when calling a Partition Selection Exit routine for a HALDB. This can occur standalone or while using the HDSORT=Y option of Database Organizer for IMS (DBO) while reloading a HALDB. When a Partition Selection Exit is specified on a HALDB with the HDSORT=Y option specified, the following messages may be issued and no segments will be reloaded: DBOM505I LINK to HDSORT Complete, RC=0000. DBOI123W NO SEGMENTS WERE RELOADED. The database partitions will be formatted and empty. None. PRODUCT(S) AFFECTED: CA Database Analyzer Release 14.0 CA Database Analyzer Release 15.0 CA Database Analyzer Release 16.0 DBA 447 (C)2013 CA. All Rights Reserved.R00751-I15-SP1 DESC(INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT). FMID (CIDOF00) PRE ( RO43002 RO48006 RO51027 ) SUP ( ZA13925 ) ++IF FMID(CIDAF00) REQ(RO60433). ++IF FMID(CITKF00) REQ(RO60435).

CA IMS Tools 15.0 15 CA RS 1308 - PTF RO60435 15.0 RO60435 RO60435 M.C.S. ENTRIES = ++PTF (RO60435) INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT PROBLEM DESCRIPTION: The Randomizer Analysis Program (RAP) component of Database Analyzer for IMS (DBA) can obtain an invalid partition number when calling a Partition Selection Exit routine for a HALDB. This can occur standalone or while using the HDSORT=Y option of Database Organizer for IMS (DBO) while reloading a HALDB. When a Partition Selection Exit is specified on a HALDB with the HDSORT=Y option specified, the following messages may be issued and no segments will be reloaded: DBOM505I LINK to HDSORT Complete, RC=0000. DBOI123W NO SEGMENTS WERE RELOADED. The database partitions will be formatted and empty. None. PRODUCT(S) AFFECTED: CA Database Analyzer Release 14.0 CA Database Analyzer Release 15.0 CA Database Analyzer Release 16.0 DBA 447 (C)2013 CA. All Rights Reserved.R00751-I15-SP1 DESC(INVALID PARTITION SELECTED WITH RAP CALLING PS EXIT). FMID (CITKF00) PRE ( RO43004 RO48008 RO51029 ) SUP ( ZA13925 ) ++IF FMID(CIDAF00) REQ(RO60433). ++IF FMID(CIDOF00) REQ(RO60434).

CA IMS Tools 15.0 16 CA RS 1308 - PTF RO60552 15.0 RO60552 RO60552 M.C.S. ENTRIES = ++PTF (RO60552) REORG NUMBER NOT INCREMENTED FOR EMPTY PARTITION CA Database Organizer for IMS for z/os. Problem Description: CA Database Organizer for IMS for z/os does not properly maintain the REORG number for empty partitions for HALDBs when the Recon setting REORGV is on. These inconsistencies can occur after CA Database Organizer functions: FORMAT and RELOAD. Symptoms: CA Database Analyzer reports the errors in DBAERROR as: DBA0001E ERROR IN BIT CI # = 2 (HEX 000002), RBA OF CI = DBA0020I THE ERROR WAS DETECTED AT CI OFFSET 2 (HEX 0002). DBA0061I REORG NUMBER DOES NOT MATCH THE DBRC VALUE. DBA1900I THERE WAS 1 CI INTEGRITY ERROR FOUND. Impact: An integrity error is found for the empty partition. DBA steps will fail when issued after a DBO FORMAT or RELOAD. Also, there is no potential for regressing the REORG numbers on segments since the partition is empty. Circumvention: None. PRODUCT(S) AFFECTED: CA Database Organizer Release 14.0 CA Database Organizer Release 15.0 DBO 955 (C)2013 CA. All Rights Reserved.R00756-I15-SP1 DESC(REORG NUMBER NOT INCREMENTED FOR EMPTY PARTITION). FMID (CIDOF00) PRE ( RO36434 ) SUP ( ZA13687 )

CA IMS Tools 15.0 17 CA RS 1308 - PTF RO60640 15.0 RO60640 RO60640 M.C.S. ENTRIES = ++PTF (RO60640) IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS PROBLEM DESCRIPTION: CA Database Copier for IMS (DBCOPY) leaves temporary FLASH COPY datasets allocated when specifying FLASH=Y and DELETEFLASH=Y while copying a DBDSGRP, after applying R14 PTF (RO47245) or R15 PTF (RO49413). Subsequent Image Copy JOBS may fail with "NOT CATLG 2" message when specifying DELETEFLASH=Y since temporary FlashCopy datasets are not cleaned up. The Image Copy completes successfully but temporary datasets are left allocated, causing subsequent Image Copies JOBs to receive "NOT CATLG 2" message. Manually delete the FLASHCOPY Temporary datasets. PRODUCT(S) AFFECTED: Database Copier Release 14.0 Database Copier Release 15.0 Database Copier Release 16.0 DBCOPY 208 (C)2013 CA. All Rights Reserved.R00758-I15-SP1 DESC(IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS). FMID (CIDOF00) PRE ( RO36813 RO37975 RO38430 RO38844 RO42218 RO48985 RO49005 RO51027 ) SUP ( HIDJ004 RO37966 RO44569 RO49413 RO49873 RO57259 ZIKJ064 )

CA IMS Tools 15.0 18 CA RS 1308 - PTF RO60814 15.0 RO60814 RO60814 M.C.S. ENTRIES = ++PTF (RO60814) FREE SPACE PCT FACTOR FOR PHDAM NOT HONORED FOR NON-PRIM DSG PROBLEM DESCRIPTION: CA Database Organizer for IMS (DBO) does not honor the Free Space Percentage Factor (FSPF) for PHDAM databases with multiple DSGs. The FSPF is ignoredfor all non-primary DSGs regardless of the HDAMFSPF option setting. The Reload function does not allocate Free space for non-primary DSG when FSPF is defined in the Recon for the associated partition. Free Space not reserved in secondary DSGs for PHDAM file. None. PRODUCT(S) AFFECTED: CA Database Organizer Release 15.0 CA Database Organizer Release 16.0 DBO 956 (C)2013 CA. All Rights Reserved.R00763-I15-SP1 DESC(FREE SPACE PCT FACTOR FOR PHDAM NOT HONORED FOR NON-PRIM DSG). FMID (CIDOF00) PRE ( RO41328 RO43002 RO48006 RO51027 ) SUP ( ZA13732 ) ++HOLD (RO60814) SYSTEM FMID(CIDOF00) REASON (ACTION ) DATE (13191) COMMENT ( Product: Database Organizer Release: 15.0 Sequence: Purpose: Relevance: Knowledge required: Access required: Steps to Perform: ).

CA IMS Tools 15.0 19 CA RS 1308 - PTF RO61229 15.0 RO61229 RO61229 M.C.S. ENTRIES = ++PTF (RO61229) IDI1200I VSAM STATUS - SEQ GET REQUEST REJECTED PROBLEM DESCRIPTION: The CA Database Organizer for IMS for z/os fails during the unload step with message IDI1208I, IDI1200I or DBO1335E when LPCKRETRIEVE=YES or MIGRATETOHALDB=YES functions are specified for a database containing logical relationships and one or more of the segments are related via virtual pairing. IDI1208I A VSAM EXCEPTION OCCURRED DURING EXECUTION OF A GET RPL IDI1200I VSAM STATUS - SEQ GET REQUEST REJECTED AT HEX RBA "UNKNOWN " The unload terminates with RC 16. The unload file is invalid and must be discarded. None PRODUCT(S) AFFECTED: CA Database Organizer Release 16.0 DBO 953 (C)2013 CA. All Rights Reserved.R00766-I15-SP1 DESC(IDI1200I VSAM STATUS - SEQ GET REQUEST REJECTED). FMID (CIDOF00) PRE ( RO36434 RO36813 RO36833 RO37666 RO37975 RO38361 RO38430 RO38778 RO38844 RO38848 RO40350 RO41280 RO41335 RO41847 RO42218 RO42475 RO42998 RO43002 RO43349 RO44333 RO44565 RO45000 RO45877 RO47140 RO47303 RO47307 RO48006 RO48985 RO49005 RO49283 RO49318 RO49766 RO49767 RO49768 RO50442 RO51027 RO51532 RO52315 RO52455 RO53255 RO54109 RO55459 RO60225 RO60282 RO60434 RO60814 ) SUP ( HIDJ001 RO38476 RO38479 RO38727 RO38937 RO41035 RO41039 RO41328 RO41414 RO42221 RO42994 RO43389 RO43698 RO44337 RO45873 RO46338 RO46640 RO47545 RO50242 RO50323 RO50775 RO51582 RO51747 RO51901 RO52699 RO52777 RO55349 RO56984 RO60552 ZA13496 )

CA IMS Tools 15.0 20 CA RS 1308 - PTF RO61231 15.0 RO61231 RO61231 M.C.S. ENTRIES = ++PTF (RO61231) INCORRECT DSID USED BY PHIDAM RECOVERY CA High Performance Recovery for IMS for z/os CA High Performance Recovery for IMS for z/os FUNCTION=RECOVER when recovering a PHIDAM Multi-DSG database calculates incorrect DSIDs for all but the first DSGROUP of the database. Execution of the FUNCTION(RECOVERY) will terminate successfully but a subsequent FUNCTION(INDEXCREATE) may fail or FUNCTION(ANALYZEALL) may detect errors due to some missing data. Database is partially recovered. DBA may report integerity errors. None. PRODUCT(S) AFFECTED: Database Organizer Release 14.0 Database Organizer Release 15.0 Database Organizer Release 16.0 HPR 224 (C)2013 CA. All Rights Reserved.R00767-I15-SP1 DESC(INCORRECT DSID USED BY PHIDAM RECOVERY). FMID (CIDOF00) PRE ( RO38844 RO40350 RO42221 RO43002 RO47303 RO48006 RO50323 RO51027 RO61229 ) SUP ( ZHPJ055 )

CA IMS Tools 14.0 21 CA RS 1308 - PTF RO59986 14.0 RO59986 RO59986 M.C.S. ENTRIES = ++PTF (RO59986) S222 OR S522 IICOPY WAIT FOR DATABASE CA Database Copier for IMS for z/os PROBLEM DESCRIPTION: The CA Database Copier for IMS for z/os (DBCOPY) function Incremental Image Copy (IICOPY) will be cancelled by the operator (S222) or time out with a S522 abend while waiting to allocate one of the database datasets defined by the DBD. The function should not be allocating the database dataset because it is not required for IICOPY. The IICOPY step will wait for the database dataset until it is cancelled (S222) or times out with a S522 abend. The following messages will be found in the JESMSGS dataset: IKJ56225I DATA SET database_dataset_name ALREADY IN USE, TRY LATER+ &MIM1038I job_name1 CONTENTION WITH job_name2 OWNS EXCL ON lpar_name IKJ56225I DATA SET IS ALLOCATED TO ANOTHER JOB OR USER The DBOMSGS dataset will have the following message: DBON325E DYNAMIC ALLOCATION FAILED FOR "xxxxxxxx", S99ERROR=0210, S99INFO=0000 The IICOPY step fails. An IMS region has the database dataset allocated with DISP=OLD. The step WILL EXECUTE IF THE DATABASE IS DBR'ED. PRODUCT(S) AFFECTED: Database Copier Release 14.0 Database Copier Release 15.0 DBCOPY 203 (C)2013 CA. All Rights Reserved.R00611-I14-I14SP1 DESC(S222 OR S522 IICOPY WAIT FOR DATABASE). FMID (CIDOE00) PRE ( RO21570 RO23957 RO24019 RO26079 RO26367 RO29098 RO29221 RO32363 RO32646 RO32760 RO34240 RO35097 RO36276 RO37733 RO37901 RO41454 RO43842 RO47245 RO48978 ) SUP ( RO28471 RO37739 ZIKI058 )

CA IMS Tools 14.0 22 CA RS 1308 - PTF RO60691 14.0 RO60691 RO60691 M.C.S. ENTRIES = ++PTF (RO60691) IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS PROBLEM DESCRIPTION: CA Database Copier for IMS (DBCOPY) leaves temporary FLASH COPY datasets allocated when specifying FLASH=Y and DELETEFLASH=Y while copying a DBDSGRP, after applying R14 PTF (RO47245) or R15 PTF (RO49413). Subsequent Image Copy JOBS may fail with "NOT CATLG 2" message when specifying DELETEFLASH=Y since temporary FlashCopy datasets are not cleaned up. The Image Copy completes successfully but temporary datasets are left allocated, causing subsequent Image Copies JOBs to receive "NOT CATLG 2" message. Manually delete the FLASHCOPY Temporary datasets. PRODUCT(S) AFFECTED: Database Copier Release 14.0 Database Copier Release 15.0 Database Copier Release 16.0 DBCOPY 208 (C)2013 CA. All Rights Reserved.R00615-I14-I14SP1 DESC(IC WITH FLASH=Y AND DELETEFLASH=Y LEAVES TEMP DSNS). FMID (CIDOE00) PRE ( RO21570 RO23957 RO24019 RO26079 RO26367 RO29098 RO29221 RO32363 RO32646 RO32760 RO34240 RO35097 RO36276 RO37733 RO37901 RO41454 RO43842 RO48978 ) SUP ( HIDI008 RO28471 RO37739 RO44986 RO47245 RO56680 RO59986 ZIKI061 )