MultiSwiss 6x16 Machine options We keep you turning
Machine options Description Integrated X-Y numerical axes, position 3 Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx) 273-0053 Integrated X-Y numerical axes, position 4. Travel ± 15 mm. TB-DECO program is supplied (Not compatible with xxxx) 273-0054 Part separator and pneumatic chute for parts with a 40 mm max. length and chute of 70 mm max. Integrated carrousel, small capacity. 273-0100 Integrated carrousel, small capacity. Specify the configuration of the baskets at the of order : - 5 x 270 cm 3 or 10 x 90 cm 3 or 20 x 50 cm 3 (requires 0100) 273-0115 2
Description Integrated carrousel, large capacity. Includes 12 baskets of 1.7 L (requires 0100) (not compatible with 0110, 0115, 0125) 273-0120 Fixed re-chucking device mounted in position 1 (requires 0830 and 1200) 273-0200 Hydraulic loading device mounted in position 1, F16 collet not included. Recommended for bars at least Ø10 mm Mandatory for bars from Ø12 to 16 mm (requires 273-0815) 273-0210 Oil pan with grid 273-0300 3
Machine options Description Status tower 273-0400 7 clamping collets Ø 4-16 available by 1 mm increment to be specified at time of order 273-0801 Clamping collet type F16 For hydraulic loading device Diameter to be specified at time of order 273-0815 7 clamping collets Ø 4-16 Grooved (by 1 mm) Ø to be specified at time of order 273-0820 4
Description 1 re-chucking collet mounted on option 0200 Ø to be specified at time of order. Set of 6 clamping tubes Ø 15 (12-14) 273-0830 Set of 6 clamping tubes Ø 15 (12-14) 273-0840 Set of 6 clamping tubes Ø 12 (9-11) 273-0841 Set of 6 clamping tubes Ø 9 (6-8) 273-0842 5
Machine options Description Set of 6 clamping tubes Ø 7 (4-6) 273-0843 Set of 6 clamping tubes Ø 5 (3-4) 273-0844 Set of 6 clamping tubes Ø 16,40 (15-16) 273-0845 Set of 6 reduction tubes Ø 15 (12-14) 273-0849 6
Description Set of 6 reduction tubes Ø 12 (9-11) 273-0850 Set of 6 reduction tubes Ø 9 (6-8) 273-0851 Set of 6 reduction tubes Ø 7 (4-6) 273-0852 Set of 6 reduction tubes Ø 5 (3-4) 273-0853 7
Machine options Description Set of 6 reduction tubes Ø 17 (15-16) 273-0855 1 pick up collet Ø 3-16 mm including blank ejector Collet Ø to be specified at time of order. 273-0900 Turning tool holder, base (16x16). 273-1010 Additional turning tool holder (16X16) (requires 1010) (not compatible with 1200) Additional tool holder for drilling (16X16) 273-1011 8
Description Additional tool holder for drilling (16X16) for short parts or short holes. (requires 1010 or 1020) (not compatible with 1200) 273-1012 Turning tool holder, base (16x16) for reversed rotation. 273-1013 Transversal support for a HF spindle (not compatible with 1010, 1020) 273-1050 Cut-off tool holder monted on position 6 273-1120 9
Machine options Description Support for 2 end units Ø 25 (not compatible with 0300, 1011, 1012, 1240) 273-1200 Clamping flange for HFspindle Ø25 mm. Needed with function 1200 + 2120 273-1205 Fixed end working drill holder Ø 25 with collet for ESX-16, 10 mm capacity. Pos. 2 to 5 (requires 1200) 273-1220 Support for 3 end units Ø 16 (not compatible with 0300, 1011, 1012, 1200) 273-1240 10
Description Steady end working drill holder Ø 16 with collet for ESX-12, 7 mm capacity. Pos. 2 to 4 (requires 1240) 273-1241 Short steady end working drill holder Ø 16 with collet for ESX-12, 7 mm capacity. Pos. 2 to 5 (requires 1240) 273-1242 Support for tool holders in counter operation 273-1300 Counter operation tool holder for 16X16 cutting tool. (requires 1300) 273-1310 11
Machine options Description Support for steady drill holder for counter operations. Thruspraying. (requires 1310) 273-1330 Steady drill holder for counter operations (requires 1330) 273-1331 Centering holder for the COP mounted in the 16x16 tool holder. (requires 1310) 273-1340 Double drill holders Ø 6 mm for the counter operation. (requires 1310 or 1450) (not compatible with 1330) 273-1400 12
Description Reamer holder for counter operations (requires 1310 or 1450) (not compatible with 1330) 273-1410 Transversal support for a HF spindle in COP (requires 1300) (not compatible with 1310) 273-1450 Cross support for a Right Angle HF spindle for the COP. (Requires 1300) (not compatible with 1310 and 1450) 273-1470 GWS basic support mounted in position 1 to 5 273-1501 13
Machine options Description Centering element for GWS basic support 273-1502 Protection of the GWS tool holder interface for turning (requires 1501) Not compatible with 1510) 273-1503 GWS turning tool holder 16x16 for MO and COP (requires 1501 05 1580) (not compatible with 1503) 273-1510 Support for GWS cut off tool holder mounted in position 6 273-1540 14
Description GWS cut off tool holder ISCAR type (requires 1540) 273-1541 Support with 2 axial bores Ø 25 (not compatible with 0300, 1240) 273-1550 GWS tool holder with 2 Ø 25 bores for fix drilling (requires 1551) (compatible with 1205 and 1220) 273-1551 GWS tool holder support for COP 273-1580 15
Machine options Description GWS tool holder with 2 Ø 6 bores for fix drilling in COP (requires 1580) (not compatible with 1582) 273-1581 GWS tool holder with 1 Ø 12 bore for fix drilling in COP (requires 1580) (not compatible with 1581) 273-1582 Electrical interface for drilling or polygon attachments (DCS version). 2 attachments positions 3 to 5 (not compatible with 0001) 273-2003 Electrical interface for drilling or polygon attachments (DCS version). 2 additional attachments positions 2 and 5 (requires 2003) 273-2004 16
Description Cross drilling attachment, ratio 1:1 Max. 4 000 RPM - max. 8.8 Nm Pos. 2 to 5 (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 2020, 2030, 2040) (not compatible with 2300, 2500) 273-2010 Cross drilling attachment, ratio 2:1 Max. 8 000 RPM - max. 4.4 Nm Pos. 2 to 5 Coolant through the center (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 2010, 2030, 2040) (not compatible with 2300, 2500) 273-2020 End drilling attachment, ratio 2:1 Max. 8 000 RPM - max. 4.4 Nm Pos. 2, 3, 4 (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205) (not compatible with 2010, 2020, 2040, 2300, 2500) 273-2030 Adaptation for 4 HF drilling attachments. (not compatible with 0752, 0753, 0755) 273-2100 17
Machine options Description Drive for HF spindles (requires 2100) 273-2110 High frequency spindle 5 000-60 000 RPM. - 0.03 Nm (requires 1050 or 1205 or 1450) (requires 2110) 273-2120 High Frequency spindle 90 3,300-13,300 RPM - 0.04 Nm (Requires 1470) (requires 2110) 273-2130 FETTE T-120 thread rolling attachment 273-2300 18
Description Milling attachment. For positions 2, 3, 4 or 5. Max RPM : 4,500 - Max 18 Nm a the tool. Max milling cutter Ø 50 mm. Max. width : 16 mm. (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205, 1501) (not compatible with 2010, 2020, 2030, 2040, 2300) 273-2400 Polygon attachment For positions 2, 3, 4 or 5. Max. 2 000 RPM - max. 8 Nm at tool Milling cutter Ø 80 mm max., max. width 12 mm. (requires 2001 or 2002 or 2003 or 2004) (not compatible with 1010, 1020, 1050, 1200, 1205) (not compatible with 2010, 2020, 2030, 2040, 2300) 273-2500 High pressure pump group 37,5 l/min. 40 bar (requires 3001 or 3003) (not compatible with 3020) 273-3010 High pressure pump group 26 l/min. 80 bar (requires 3001 or 3003) (not compatible with 3010) 273-3020 19
Machine options Description Coolant fed, HP, rotating ejector. (requires 3010 or 3020) 273-3050 Chip tank recovery for paper 273-3150 Chip conveyor with belt *** and sump pump. (not compatible with 3100) 273-3200 Swarf tank for conveyor *** (requires 3200) 273-3250 20
Description Additional roll of filter paper for the filtration device. 273-3500 Replacement cartridge for the hydrostatic group filter (5 µm). 273-3510 Replacement cartridge for security filter for the hydrostatic group (20 µm). 273-3520 Group to produce cold water 33 kw, integrated to the container. (not compatible with 3601) 273-3600 21
Machine options Description Fire fighting device KRAFT & BAUER *** Mechanical integration & interface included Extinction agent : CO 2 Use with a centralize air filtering system. 273-3700 Fire fighting damper, with pneumatic activation (Not compatible with 3800 and 3802) 273-3710 Oilmist extractor 1400 m³/h (50 Hz) - 1600 m³/h (60 Hz). Electrostatic filter Horizontal version, total height 2,9 m. 273-3802 Electric tool breakage detector Middex type WK2. Detection of 1 tool per position max. Position 1 to 5 273-4010 22
Description Tool pre-setter MultiSwiss *** (requires 4510) 273-4500 Adaptation to pre-set tools for tool pre-setter MultiSwiss. 273-4510 Adaptation to pre-set Multiswiss tools for tool pre-setter Multi. 273-4610 Spindle centering system - Mowidec 273-4700 23
Machine options Description System for tool management 273-5200 Function axis C in main operations 6 spindles/increment 0,001 degree 273-7651 Function axis C in counter-operations 1 spindle/increment 0,001 degree 273-7652 Polar Milling function in polar coordinates (interpolation of the axis C with a linear axis) (requires 750-0005) Distance Angle 273-7653 24
Description Machine warm up Automatic turn ON of the warm up cycle (requires 273-0400) 273-7660 C Remote Assistance Service allowing TORNOS the remote visualization of the machine CNC screen. Out of warranty intervention time included (requires a connection to the Internet) 273-7670 Router ethernet for remote maintenance secured Service allowing the visualization At a distance screens CNC by TORNOS (require connection to an Internet network) 273-7675 Software package all inclusiv - Remote assistance - Machine warm up - System of tool manager - Milling function in polar coordinates - Function C axis in main operations in counter operation 273-7700 25
We keep you turning tornos.com TORNOS SA Rue Industrielle 111 CH-2740 Moutier Phone +41 (0)32 494 44 44 Fax +41 (0)32 494 44 03 contact@tornos.com Tornos throughout the world Conforms to the European CE / CEM Safety Standards This document is based on information available at the time of publication. While every effort has been made to be accurate, the information contained herein does not purport to cover all details or variations in hardware and software, nor to provide for every possible contingency in connection with installation, operation and maintenance. TORNOS SA assumes no obligation of notice to holders of this document with respect to changes subsequently made. TORNOS SA makes no representation or warranty, expressed, implied, or statutory with respect to, and assumes no responsibility for the accuracy, completeness, sufficiency or usefulness of the information contained herein. No warranties of merchantability nor fitness for purpose shall apply. Edition Mars 2016 Tornos 2016, All rights reserved cm