VERTICAL MILLING MACHINES CMX V Series CMX 600 V CMX 800 V CMX 1100 V CMX V IN 3 SIZES WITH 2 DIFFERENT 3D CONTROLS DMGMORI.COM

Transcription

1 CMX 600 V CMX 800 V CMX 1100 V VERTICAL MILLING MACHINES CMX V Series CMX V IN 3 SIZES WITH 2 DIFFERENT 3D CONTROLS DMGMORI.COM

2 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data The solution-based CMX V: 3 sizes, 2 controls, more than 200 options! 1 DMG MORI has developed the CMX V Series, with the aspiration to provide robust machines that can serve for many years to a greater number of customers. The CMX V models can handle a wide range of workpieces for all kinds of fields thanks to their great versatility. The models achieve high precision, productivity and reliability. This applies to the modularity and possibility to build up your own machine with wide range of options and technological solutions DMG MORI SLIMline multi-touch control panel and SIEMENS CMX V IN 3 SIZES WITH 2 DIFFERENT 3D CONTROLS 19 DMG MORI SLIMline multi-touch control panel and HEIDENHAIN

3 1: Technology: Variety of applications (p. 4-9) 2: Automation solutions (p ) 3: Customization: Broad range of options (p ) 4: Controls technology (p ) PERFECT 3D MULTI-TOUCH CONTROL TECHNOLOGY + 19 DMG MORI SLIMline multi-touch control panel and HEIDENHAIN + 19 DMG MORI SLIMline multi-touch control panel and SIEMENS 03 HIGHLIGHTS + 30-pocket tool magazine in standard with quick tool change within 2.4 sec. tool-to-tool + 60-pocket tool magazine as an option with quick tool change within 2.7 sec. tool-to-tool + In-Line spindle of 12,000 rpm with power 13 kw (40 % DC) and torque 83 Nm (40 % DC) in standard + Improved ergonomics for easy loading of heavy workpieces + Huge table for machining of parts up to: CMX 600 V 600 kg CMX 800 V 800 kg CMX 1100 V 1,000 kg + Small foot print: CMX 600 V 5.5 m 2 CMX 800 V 6.7 m 2 CMX 1100 V 8.6 m 2 19 DMG MORI SLIMline multi-touch control panel and SIEMENS

4 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data The C-frame benchmark for highest rigidity The roller guides employed by the CMX V Series achieve high stability and precision as well as ensure high rigidity and durability. The low connected load, efficient power consumption and energy recovery ensure a good energy utilisation. The CMX V Series achieves a sophisticated, lean and high-rigidity machine structure by using FEM analysis from the fundamental design stage for analysis of various operating conditions and environmental changes. The CMX V Series is based on a C-frame cast iron bed for them best stiffness and vibration characteristics. HIGHLIGHTS HIGH RIGIDITY 04 + Rigid Y-axis concept in whole range of travel CMX 600 V CMX 800 V CMX 1100 V Travel X / Y / Z-axis mm 600 / 560 / / 560 / / 560 / 510 Rapid traverse X / Y / Z-axis m/min 30 / 30 / / 30 / / 30 / 30 IMPROVED C-FRAME CONCEPT WITH MOVABLE TABLE AS X AXIS + Casting for support in front of the column to achieve more stability FEM-OPTIMIZED DESIGN + Simulation of structural deformation at the time of load application + Fine adjustment to every part, including the thickness of the bed, the shape and layout of the ribs, to achieve a high level of flexural rigidity FEM: Finite Element Method PRECISION IN EVERY COMPONENT AND DETAIL + Accuracy of positioning in all axes under 6 µm without linear scales (according to ISO ) + Thermal compensation ensures stable and highest quality production process + Ball-screws made in first class of tolerances (IT 1)

5 05

6 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data Sophisticated design, small footprint and large working area combined in the CMX V series The CMX V Series employs a sophisticated cover design and is designed taking into account the accessibility to the table and workpiece handling with a crane. Other features for better workability are also incorporated throughout the machine. The lubrication unit and other peripherals requiring periodic maintenance are placed in an easily accessible location to improve maintainability

7 1 ACCESSIBILITY With excellent access to the table and a wide door opening, setup operations such as fixture adjustment can be done smoothly. The position of the lower end of the front door has been lowered to offer better access to the spindle and table. A: Height of table top surface: 850 mm B: The position of the lower end of the front door: 748 mm C: Distance from table: 310 mm D: Door opening: CMX 600 V: 810 mm CMX 800 V: 910 mm CMX 1100 V: 1,110 mm A B C D 2 LOADING AND UNLOADING WITH A CRANE The ceiling part also opens, allowing easy loading and unloading of workpieces using a crane. The cabin roof* can be opened / closed automatically via M-functions. * available as option 07 3 SWIVEL-TYPE OPERATION PANEL The operation panel which can swivel from 0 degree to 100 degrees improves operability and visibility. + Vertical swivel range: Horizontal swivel range: 45 Swivel range (operation panel) 100

8 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data High-quality machining supported by high-performance spindles The CMX V machines are equipped with a high-performance inline spindle with a maximum standard speed of 12,000 rpm. The design is optimized through structural analysis to cover a wide range of machining. The high durability and high precision of the spindle allows high quality machining. The inline spindle has proven its reliability and long-lasting performance over the past years, leading to a higher productivity on the customer's side. 08 SPINDLE HIGHLIGHTS SOPHISTICATED SPINDLE LABYRINTH STRUCTURE + The labyrinth structure has been enhanced, taking into account frequent use of high-pressure coolant + Prevent coolant entry and improve spindle durability STABLE & LASTING CLAMP FORCE + Extended disk spring life allows the spindle to maintain long period consistent clamp force on the tool TECHNICAL DATA CMX 600 V CMX 800 V CMX 1100 V Max. spindle speed rpm 12,000 12,000 12,000 Drive power (40 / 100 % DC) kw 13 / 9 13 / 9 13 / 9 Max. torque (40 / 100 % DC) Nm 83 / / / 57 Tool taper SK 40, BT 40*, CAT 40* SK 40, BT 40*, CAT 40* SK 40, BT 40*, CAT 40*

9 PRECISION IN EVERY DETAIL OF THE SPINDLE 1 Inline spindle 12,000 rpm 83 Nm 13 kw and 40 % DC 2 Coupled motor with hollow shaft 3 Optional internal coolant supply 4 Pneumatic tool unclamping 5 Ceramic hybrid bearing for higher speeds Power torque diagram Inline spindle 12,000 rpm Torque (Nm) Power (kw) kw 40% DC 17.4 hp 11 kw 60% DC 14.8 hp 9 kw 100% DC 12.1 hp Nm 40% DC 61.2 ft lbs 70 Nm 60% DC 51.6 ft lbs 57 Nm 100% DC 42 ft lbs 7 kw 9.4 hp kw 4.7 hp 34 Nm 25.1 ft lbs Nm 8.1 ft lbs Nm 17.7 ft lbs 1 5 Speed (rpm) ,000 1,500 3,700 4,500 6, ,500 5,000 8,000 12,000

10 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data PALLET AUTOMATION Automation solution PH 150 Automated process now offers the highest potential for an increase of productivity with universal milling machines. At the same time, consistent production quality is achieved. This leads to economic success and the growing pressure of rising costs is countered efficiently. DMG MORI automates numerous universal machines and machining centres from its wide portfolio with the PH 150 pallet handling system. This enables customers attractively priced entry into the virtually unmanned manufacturing of milled parts. Optimum manual pallet placement is guaranteed by the large loading door or by crane. All orders can be controlled and prioritised using the dedicated user-friendly interface, which is operated via the machine control panel. 10 NOW AVAILABLE: EROWA CLAMPING SYSTEM

11 HIGHLIGHTS PH Fast changeover thanks to linear loading + Maximum pallet weight of 150 kg lbs (optional 250 kg lbs) + 10-positions pallet magazine in standard for pallet mm in (other configurations of magazine available as an option) + Ergonomic loading via crane portal + Automation system is operated from machine control panel + Jobmanager Control Comfort Plus available as an option + New DMG MORI VERTICO design + Available for SIEMENS and HEIDENHAIN controls AUTOMATION PACKAGE CMX V Prepare your CMX V for any kind of automation! + Automatic Lift Door on the right cabin side + Robot interface (DMG MORI standard) + Hydraulic and pneumatic preparation with 2 hydraulic and 2 pneumatic channels on the machine table (to expand the fixing system and the medium supply) + Signal lamp with 4 colours + 10 free M-Codes + Bed and ATC arm flushing via M-Function Technical parameters PH 150 Magazine table drive X-axis drive Z-axis drive Max. workpiece weight (with pallet) Pallet size servo servo pneumatics 150 kg(optional 250 kg) mm (optional up to mm) Number of pallet tables 10 Clamping system Control System Interface SCHUNK / EROWA OMRON Standard DMG MORI 11

12 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data WORKPIECE HANDLING AUTOMATION WH CELL Modular automation system for workpieces up to 15 kg Everything from a single source: the WH Cell offers a reliable turnkey solution from engineering to fixtures, tooling, NC programs and on through to integrated automation. The WH CELL offers a perfect integration of CMX V series and automation thanks to end-to-end process concept and digital twin. Furthermore, it offers a wide spectrum of individual options to customize the solution to specific requirements and workpieces. 12 Availability CMX 600 V CMX 800 V CMX 1100 V WH 6 CELL WH 8 CELL WH 15 CELL Available Not available WH 8 CELL: the accessibility to working area by robot is limited and each case has to be analyzed separately on request with technical department FAMOT

13 HIGHLIGHTS WH CELL 2 + Workpieces up to mm and max. 15 kg* + Two workpieces storage systems Drawers up to 220 mm 8.7 in workpiece height Circulating memory up to 100 mm 3.9 in workpiece height + > 1,000 workpieces storage capacity by e. g. 6 drawers, each mm (for workpieces mm) + Minimum space requirements for automation < 4.0 m² for the WH 6 CELL < 3.7 m² for the WH 8 CELL < 5.5 m² for the WH 15 CELL + Standardized modules, flexible and cost-effective * when using a single gripper : Referencing station, many options and upgrade levels available 2: Loading / unloading with double gripper TECHNICAL DATA WH 6 CELL WH 8 CELL WH 15 CELL Circulating storage Drawer storage Drawer storage Workpiece weight max. (single gripper) kg Workpiece dimensions max. mm Workpiece height approx. (restricted carrier) mm 50 or or 220 Useable area workpiece carrier mm Numbers of carrier 8 or 15 2 or 3 2 up to 6 Dimension of workpiece carrier drawer mm Carrier load max. kg Space requirements (W L) mm 1,925 2,045 1,930 1,935 2,455 2,240

14 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data Customization with technological solutions and options TOOL MAGAZINE + Tool magazine 60 places with double gripper (chain type, servo drive) + Tool (un-) loading through magazine door during AUTO Mode + Automatic magazine shutter (instead of brushes) + Buttons for magazine rotation 4. AXIS WITH NC-ROTARY TABLE 14 The optional NC device allows efficient machining in 5 axes with LEHMANN table + Spindle height: 150 mm + Spindle speed: 90 rpm + Face plate: ø mm + Three-jaw chuck: ø mm + Spindle load without / with support: 200 / 400 kg + Clamping torque: 800 Nm + Cycle time including clamping: approx. 0.4 sec (90 ) MEASURING AND PRECISION WITH MEASURING SENSOR KIT Single-touch tool and workpiece probing facilitate machine set-up and guarantee your process stability. + Power Probe 40 optical measuring sensor for workpiece measurement + OTS optical tool setter for tool measurement + OMI-2T receiver for both sensors COOLANT SUPPLY In the modern production of complex components made of high-quality materials, the internal coolant supply through cooling channels in the spindle and tools is of particular importance. The rapidly increasing cutting speeds and ever-shrinking diameter of deep bores necessitate rapid heat dissipation and safe chip removal. + 12, 20, 40 or 80 bar internal coolant supply in the production packages

15 Selected options and useful packages Production package 1 SIEMENS / HEIDENHAIN Through spindle coolant supply (ICS) bar 12 Chip conveyor (scraper type, left side) Tank capacity left side chip conveyor 600 V / 800 V / 1100 V litre 200 / 220 / 250 Bed and ATC arm flushing via M-Function Coolant spray gun for swarf removal Automatic cabin roof Signal lamp with 4 colours Electronic handwheel Production package 2** Through spindle coolant supply (ICS) bar 20 Chip conveyor (scraper type, left side) Tank capacity left side chip conveyor 600 V / 800 V / 1100 V litre 200 / 220 / 250 Tank capacity papertype filter litre 600 Bed and ATC arm flushing via M-Function Coolant spray gun for swarf removal Automatic cabin roof Signal lamp with 4 colours Electronic handwheel Chip removal package Chip conveyor (scraper type, left side) Tank capacity left side chip conveyor 600 V / 800 V / 1100 V litre 200 / 220 / 250 Coolant spray gun for swarf removal Signal lamp with 4 colours Automation package Automatic lift door on right cabin side, Robot interface (DMG MORI Standard), Interface with 2 channels hydraulic or pneumatic connections on the table, Bed and ATC arm flushing via M-Function, Signal lamp with 4 colours, 10 free M-codes Tropical package Active Cooling Unit for Electrical Cabinet, Additional Ventilator for Control Panel Selected options 5-axis NC-Rotary table (LEHMANN) rotofix clamping system for LEHMANN table Laser BLUM NT F-140 probe for tools Chip conveyor (scraper type, left side) Chip conveyor (scraper type, rear) 600 V / 800 V Through spindle coolant supply (ICS) bar 12 / 20 / 40 / 80 Tool loading / unloading through magazine door Tool holder SK40 1) / BT 40* / CAT 40* Coolant spray gun for swarf removal Touch probe kit (tool + workpiece measurement) Direct measuring system (X- / Y- / Z-axis) Signal lamp with 4 colours Electronic handwheel External programmable M-function 10 PROtime Tropical package 15 available 1) standard configuration *optional **Production package 3 and 4 are also available with internal coolant supply 40 bar and 80 bar accordingly

16 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data Technology Cycles MPC 2.0 MACHINE PROTECTION CONTROL + Vibrations sensors at the milling spindle + Stop at critical vibration states + Cutting force monitoring for drilling and thread cutting + Unbalance display when idling 16 ATC 2.0 APPLICATION TUNING CYCLE + Process-oriented tuning of feed rate in relation to table loading + Minimised processing time with maximised component quality, also depending on the workpiece weight + Easy operation for adjusting the machine dynamics with DMG MORI drive parameters + Time saving in roughing, high surface finish during finishing

17 Technology Excellence 1 2 1: Flange spindle Industry: Machinery Material: EN-GJL-300 Dimensions: ø mm Machining time: 19 min 2: Divider Industry: Machinery Material: Aluminum Dimensions: ø mm Machining time: 25 min 3: Bearing block Industry: Machinery Material: EN-GJL-300 Dimensions: mm Machining time: 25 min 4: Bearing block Industry: Machinery Material: EN-GJL-250 Dimensions: mm Machining time: 45 min : Flange spindle Industry: Machinery Material: 16MnCr Dimensions: ø mm Machining time: 35 min 6: Ring Industry: Machinery Material: 16MnCr Dimensions: ø mm Machining time: 110 min 5 6

18 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data DMG MORI SLIMline multi-touch control panel for highest efficiency and reliability The new DMG MORI SLIMline multi-touch control panel with Operate 4.8 on SIEMENS or with HEIDENHAIN represents the next advanced step for a modern user interface and is compatible with the previous version of Operate. The practical and ergonomically optimised 19 multi-touch display with its maximised resolution and 45 swivel range offers decisive user benefits. Thanks to 3D control technology, you can simulate machining in advance this is what state-of the-art and user friendly workplaces look like nowadays! Additionally, the control system features greatly expanded CNC memory capacity from 5 MB to 4 GB and additional memory 8 GB on DMG MORI SMARTkey. Intuitive use for quick and easy operation 18 TAP WITH ONE FINGER Window / object selection TAP AND HOLD Window / subject opening PINCH Decrease of graphic content, f. e. simulation, mold-view TAP WITH TWO FINGERS Context menu, f. e. copy / paste FLICK Scrolling to the list / file, f. e. programs or tools / NC programs SPREAD Increase of graphic content, f. e. simulation, mold-view

19 19 DMG MORI SLIMline MULTI-TOUCH CONTROL PANEL AND SIEMENS 19 DMG MORI SLIMline MULTI-TOUCH CONTROL PANEL AND HEIDENHAIN 19 MORE EFFECTIVE OPERATIONS MORE COMFORTABLE USE + Fast and convenient zoom features + Quick and convenient access to parameters and user data + Expanded memory capacity to 4 GB + Program selection: expansion on local drive / USB / Network + Multi tasking machining: extension drilling cycle for drilling / piercing; program guide with new deep hole drilling technology + Execution from external storage: display and storage of additional file formats as HTML / PDF / BMP / JPEG / DXF also on the NC + Advanced simulation: workpiece stock definition by clamping; simultaneous recording + DMG MORI SMARTkey: Personalised authorisation and additional 8 GB USB memory + Improved overview with 19-inches screen: maximized resolution and innovative comfort of intuitive use with a unique range of functions + 3D control technology: workpiece and machining simulation with touch operations + Flexible software keyboard: integrated into multi-touch display + Effective and safe machining with content access button on the panel + Optimised ergonomics: with 45 swivel range + Simplified process + Reliable touch control with proven user interface SINUMERIK Operate + Optimization of the elements on the screen + Reliable and scratch-resistant operating surface + 19-inches multi-touch display + 66 % more pixels + 45 swivel range + 4 GB now expanded memory capacity + 3D control technology

20 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data Floor plans Standard Front view (mm) Top view (mm) H D W Width (W) Depth (D) Height (H) Machine type 20 CMX 600 V mm 1,990 CMX 800 V mm 2,426 CMX 1100 V mm 3,058 2,757 2,935 2,775 Left discharge type chip conveyor (option) Front view (mm) Top view (mm) D Option ICS 12 bar inner collant H W Width (W) Depth (D) Height (H) Machine type CMX 600 V mm 2,954 CMX 800 V mm 3,405 CMX 1100 V mm 4,038 2,757 2,775 The technical data stated in the brochure is based on the basic machine configuration and may therefore deviate and be the subject to the technical changes. 2,935

21 rear chip conveyor in service position Rear discharge type chip conveyor (option) Front view (mm) Top view (mm) clearance of installtion Option ICS 20/40/80 bar H D W Width (W) Depth (D) Height (H) Machine type CMX 600 V mm 1,864 CMX 800 V mm 2,118 3,508 2,935 Not available for CMC 1100 V 21 ATC 60 (option) Front view (mm) Top view (mm) H D W Width (W) Depth (D) Height (H) coolant tank in service position Machine type CMX 600 V mm 2,954 1,935 CMX 800 V mm 3,405 2,780 CMX 800 V mm 4,038 2,935

22 Machine highlights Modularity Technology and applications Customization and solutions Control technology Technical data Technical Data CMX 600 V CMX 800 V CMX 1100 V Travel X-axis travel (longitudinal movement of table) mm ,100 Y-axis travel (cross movement of saddle) mm Z-axis travel (vertical movement of spindle head) mm Distance from table surface to spindle gauge plane mm Table Working surface mm , , Table loading capacity kg ,000 Spindle Max. spindle speed rpm 12,000 12,000 12,000 Feedrate 22 Rapid traverse X / Y / Z m/min 30 / 30 / / 30 / / 30 / 30 Cutting feedrate X / Y / Z m/min ATC Type of tool shank SK 40 / BT 40* / CAT 40* SK 40 / BT 40* / CAT 40* SK 40 / BT 40* / CAT 40* Tool storage capacity 30 (60*) 30 (60*) 30 (60*) Max. tool diameter with adjacent tools mm without adj. tools mm Max. tool length mm Max. tool mass kg Tool changing time Tool-to-tool s 2.4 (2.7**) 2.4 (2.7**) 2.4 (2.7**) chip-to-chip s Machine size Floor space width depth mm 1,990 2,757 2,954 2,757* 1 1,864 3,508* 2 2,426 2,757 3,405 2,757* 1 2,118 3,508* 2 3,058 2,757 4,038 2,757* 2 Footprint m Machine weight (net) kg 5,000 5,550 5,850 *Option **For ATC60 1 Rear discharge type chip conveyor 2 Left discharge type chip conveyor

23 Main numerical control unit specifications SINUMERIK 840D sl SIEMENS TNC 620 HEIDENHAIN Controlled axes Controlled axes X / Y / Z / A Least input increment mm Load monitor function Operation Jog feed 0 8,000 mm / min 0 30,000 mm / min Program restart Interpolation functions Helical interpolation Feed functions Cutting feedrate 1 30,000 mm / min Advance surface (cycle 832) Tolerance (cycle 32) 23 Program input Additional workpiece coordinate systems 99 sets > 999 sets Misc. function / Spindle speed function Spindle speed override % (5 % increments) Tool function / Tool offset function Number of tool offsets 200 sets > 999 sets Tool length offset Cutter radius offset Data input / output I / O interface Program storage area (Storage area for user data including NC program) Network drive USB memory 1.8 GB 4 GB Standard Option not available

24 DMG MORI LifeCycle Services DMGMORI.COM Customer First Our service promise! Available for you around the clock: service-hotline.dmgmori.com We have good news for you: Our service and spare parts prices have been completely revised. With our service commitments, we want to meet your high demands with the highest service quality. Please contact us your sales and service team is at your disposal! Top quality at fair prices. It's a promise! Best Price Guarantee for Original Spare Parts. Should you get a spare part offered by us at least 20 % cheaper elsewhere, we will refund the price difference up to 100 % *. Spindle service at best prices. The highest level of competence from the manufacturer at new and attractive prices DMG MORI spindle service! Subject to modification. Technical update rights reserved. The machines depicted here may include some options, equipment and CNC alternatives. Up to 50 % lower service costs. New Flat Call-Out Rate without travel expenses or any additional costs! Our protective shield for your productivity. Reduced operating costs, highest machine availability and maximum precision DMG MORI Service Plus! P _1118_EN * All information and price advantages for Customer First are available at: customer-first.dmgmori.com