IBM Maximo Integration Composer Release 6.2 Installation Guide Microsoft Windows
Note Before using this information and the product it supports, read the information in Notices on page Notices-1. Second Edition (January 2007) This edition applies to Release 6.2 of IBM Maximo Integration Composer and to all subsequent releases and modifications until otherwise indicated in new editions. Third-Party Technology: Certain Maximo products contain technology provided under license from third parties, as noted in the following table: IBM Product All Products IBM Maximo Third-Party Information Portions 1996-2003 Visual Mining, Inc. Visual Mining NetCharts Server provided by Visual Mining, Inc. Portions 1995-2004 Actuate Corporation. Portions 2005 BEA Systems, Inc. BEA WebLogic Server provided by BEA Systems, Inc. Maximo Discovery IBM Maximo Asset Navigator IBM Maximo Mobile IBM Maximo Mobile SE Portions 1996-2005, i-net software GmbH. J-Integra for COM v2.4. 2004 Intrinsyc Software International, Inc. MSDE Copyright Microsoft Corporation. 1998-2005 Centennial Software Limited. Portions 1993-2002 Snowbound Software Corporation. RasterMaster Raster imaging technology provided by Snowbound Software Corporation. Portions 2005 DataMirror, Inc. Portions 2000-2005 Zaval Creative Engineering Group. Portions 1996-2005 Syclo, LLC. Open Source: Maximo contains computer software obtained from the public domain, known as "Open Source" ownership of which is attributed as follows: Portions 2002, Steve Souza (admin@jamonapi.com). Portions 2000-2004, Jason Hunter & Brett McLaughlin. Portions 2004-2005, The Apache Software Foundation (http://www.apache.org/). Copyright International Business Machines Corporation 2007. All rights reserved. US Government Users Restricted Rights - Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Contents About This Guide.......................................................................v Audience............................................................................. v Related Documentation................................................................. v Support............................................................................. vii Chapter 1: Integration Composer Overview............................................. 1-1 Integration Composer Hardware/Software Requirements.................................... 1-1 Integration Composer Components....................................................... 1-3 Chapter 2: Installing IBM Maximo Integration Composer Release 6.2.1..................... 2-1 Installation Prerequisites.............................................................. 2-1 Installation Checklist.................................................................. 2-2 Installing IBM Maximo Integration Composer 6.2.1.........................................2-2 Verifying Installation................................................................. 2-10 Chapter 3: Upgrading to Integration Composer Release 6.2.1.............................. 3-1 Release 6.2.1 Updates................................................................. 3-1 Upgrade Prerequisites................................................................. 3-1 Upgrade Checklist.................................................................... 3-1 Upgrading to Integration Composer Release 6.2.1........................................... 3-2 Verifying Installation................................................................. 3-13 Chapter 4: Uninstalling IBM Maximo Integration Composer.............................. 4-1 Uninstalling IBM Maximo Integration Composer........................................... 4-1 Notices........................................................................ Notices-1 Copyright IBM Corp. 2007 iii
iv IBM Maximo Integration Composer: Installation Guide
About This Guide The IBM Maximo Integration Composer (formerly Maximo Fusion) is an integration tool that imports information technology asset data collected by asset discovery tools into the deployed assets database tables in IBM Maximo Asset Management. This guide explains how to perform the following tasks:! install IBM Maximo Integration Composer release 6.2.1 in a Microsoft Windows environment! upgrade an existing Microsoft Windows installation of Integration Composer to release 6.2.1! uninstall the Integration Composer application This section explains how this guide can help you to install the Integration Composer. It also provides information about other IBM Corporation resources available to you, such as additional documentation and support. Audience This guide is designed for the system administrator, network administrator, or other professional who installs software tools associated with Maximo. Related Documentation For more information about Maximo, refer to the following documentation: Document IBM Maximo Finance Manager s Guide IBM Maximo Installation Guide Description Describes how IBM Maximo completes financial transactions and how to set up general ledger accounts. Describes how to install and configure the following software:! Application server! IBM Maximo! Actuate IBM Maximo Multisite Administrator s Guide Describes how to configure IBM Maximo for a Multisite implementation. Copyright IBM Corp. 2007 v
Related Documentation Document IBM Maximo Online Help IBM Maximo Reconciliation Implementation Guide IBM Maximo Report Administration and Development Guide IBM Maximo System Administrator s Guide IBM Maximo User s Guide IBM Maximo Workflow Implementation Guide IBM Maximo Enterprise Adapter (MEA) System Administrator's Guide Description Provides step-by-step procedures for Maximo applications. Describes how to use the IBM Maximo Reconciliation module to reconcile the two types of information that IBM Maximo maintains about information technology (IT) assets: IT asset data and deployed asset data. Describes how to use Actuate to design and administer IBM Maximo reports. Describes database configuration, security, and other administrative level applications and tasks. Provides an overview of the Maximo end user applications. It also describes how the IBM Maximo applications interact with each other. Provides information about how to use IBM Maximo to plan, design, build, test, implement, and manage Workflow processes. Describes how to configure and use the IBM MEA. For more information about the Integration Composer, refer to the following documentation: Document IBM Maximo Integration Composer System Administrator s Guide IBM Maximo Integration Composer Installation Guide Integration Composer Help Description Describes how to use the Integration Composer to map data from an external source and import the data into the Maximo database. Describes how to install and configure the Integration Composer. IBM Corporation provides installation guides for the following platforms:! Microsoft Windows! UNIX Provides step-by-step procedures for the Integration Composer. vi IBM Maximo Integration Composer: Installation Guide
Support Document IBM Maximo Integration Adapter Implementation Guide Description Describes how to install and configure adapters purchased for the Integration Composer. IBM Corporation provides adapter implementation guides for the following products:! Altiris Inventory Solution! Centennial Discovery! HP Configuration Management (CM) Inventory Manager! IBM Tivoli Configuration Manager! Maximo MainControl i.collect! Maximo Discovery! Microsoft SMS Support IBM Maximo users with a valid Annual Customer Support Plan (ACSP) can obtain product support online at Support Online: support.mro.com. Support Online includes information about product releases, software patches, and documentation updates. To find the most current version of a document, refer to the Knowledge Base on this site. About This Guide vii
Support viii IBM Maximo Integration Composer: Installation Guide
Integration Composer 1 Overview This chapter introduces you to the IBM Maximo Integration Composer, the IBM Corporation solution for migrating information technology (IT) asset data into Maximo. With the Integration Composer, enterprises can aggregate data collected by asset discovery tools and integrate it into Maximo, creating a central repository for enterprise IT asset management, reporting, and decision support. To gather deployed asset data, an asset discovery tool, such as IBM Tivoli Configuration Manager or Altiris Inventory Solution scans computers, network devices, and network printers deployed in an enterprise and records information about the hardware and software installed on those assets. The Integration Composer transforms the collected data and imports it into Maximo. You can view imported data in the following Maximo applications: Computers, Network Devices, and Network Printers. Maximo also uses data imported by the Integration Composer to generate various reports. Integration Composer Hardware/Software Requirements This section of the installation guide describes the version of Maximo supported by the Integration Composer and the hardware and software requirements for the application server and database server. It also lists the asset discovery tools supported by the Integration Composer. Maximo Version Supported Application Server You can use Integration Composer 6.2.1 with Maximo 6.2.1 or later. The Application Server, which runs the core Integration Composer application and Java components, supports the following operating systems:! Microsoft Windows 2000/2003 Server! Solaris 9 and Solaris 10! HP-UX 11i v1 and HP-UX 11i v2! IBM AIX 5.2 and 5.3! RedHat Linux 3 The Integration Composer has the following minimum requirements:! 2 GB (or more) memory! 70 MB or greater disk space! J2SE SDK 1.4.2_05 Copyright IBM Corp. 2007 1-1
Integration Composer Hardware/Software Requirements Database Server The customer is responsible for the Database Servers, which contain and manage the source database(s) and Maximo database. Refer to the appropriate vendor for hardware requirements. Maximo supports the following database platforms:! IBM DB2 Universal Database 8.2.7! Microsoft SQL Server 2000, Service Pack 4! Microsoft SQL Server 2005! Oracle 9.2.06! Oracle 10.1.0.3 or 10.2.0.1 (either Oracle Standard or Enterprise) NOTE Oracle 10.2.0.1 requires Maximo patch 3 or higher. Asset Discovery Tools To facilitate data migration, IBM Corporation offers optional IBM Maximo integration adapters to convert and migrate data provided by the most commonly used asset and systems management tools, such as IBM Tivoli Configuration Manager. The adapters provide pre-defined mapping expressions that let you transform data and transfer it from a database created by an asset discovery tool into the Maximo database. You can import an adapter s mapping into the Integration Composer and, with little or no additional programming, execute a mapping to import data into Maximo. Asset Discovery Tools Supported The following table lists platform and driver requirements for the asset discovery tools supported by the Integration Composer. Asset Discovery Tool Database Platform Drivers Altiris Inventory Solution 5.5, 6.0 SQL Server JDBC Centennial Discovery 4.5, 4.51, 4.52, 4.53, 2005 SQL Server JDBC HP Configuration Management (CM) Inventory Manager (formerly HP Inventory Manager using Radia ) IBM Tivoli Configuration Manager 4.0, 4.2 SQL Server Oracle Oracle DB2 JDBC Oracle JDBC Thin Oracle JDBC Thin DB2 JDBC Maximo Discovery 4.5, 4.51, 4.52, 2005 SQL Server JDBC Maximo MainControl i.collect 4.3.2 SQL Server Oracle JDBC Oracle JDBC Thin Microsoft SMS 2.0, 2003 SQL Server JDBC The i-net OPTA JDBC driver for Microsoft SQL Server 7/2000 and 2005, the Oracle JDBC Thin driver, and the DB2 JDBC driver are installed with the Integration Composer. 1-2 IBM Maximo Integration Composer: Installation Guide
Integration Composer Components Integration Composer Components The Integration Composer integration tool includes the following components:! Integration Composer application! Integration Composer engine! JDBC drivers! Integration Composer repository Integration Composer Application Integration Composer Engine JDBC Drivers The Integration Composer application has a Windows-based graphical user interface (GUI) that lets you define data sources, browse data source data, define data schemas, and create mappings to transform and migrate data. The Integration Composer engine processes mapping expressions that transform data from the source data source and integrate it into a target data source. The Integration Composer uses JDBC drivers to establish connections between a source data source and a target data source. IBM Corporation provides the following JDBC drivers with the Integration Composer:! IBM DB2 JDBC driver.! i-net OPTA JDBC driver for Microsoft SQL Server 7/2000 and SQL Server 2005.! Oracle JDBC Thin driver. This driver supports Oracle 10g and earlier versions (including 8.0, 8i, and 9i). Integration Composer Repository The Integration Composer repository resides in the Maximo database and contains the following Integration Composer data:! Metadata for read-only data schemas delivered with the Integration Composer. This metadata defines the structure of the data.! Metadata for data schemas that users create in the Integration Composer.! Data source definitions that provide database connection parameters.! Mappings that define how to transform data and migrate it from a source to a target.! If a last scan time stamp exists, the Integration Composer stores the most recent last scan time stamp for every source IT asset in the Integration Composer repository. Integration Composer Overview 1-3
Integration Composer Components 1-4 IBM Maximo Integration Composer: Installation Guide
Installing IBM Maximo 2 Integration Composer Release 6.2.1 NOTE Use the instructions in this chapter for new installations only. If you are upgrading an existing installation, see Chapter 3, "Upgrading to Integration Composer Release 6.2.1," on page 3-1. Installation Prerequisites This chapter provides instructions for installing Integration Composer release 6.2.1 on servers using Microsoft Windows. The file that installs the Integration Composer uses an installer program to guide you through the installation process. The installer program installs the Integration Composer and related files. It also installs an uninstall utility that you can use to remove the Integration Composer. When the installation is complete, you can access the Integration Composer from your Start menu by selecting Start>Programs>IBM Maximo>Integration Composer>IBM Maximo Integration Composer. You must install JDK 1.4.2_05 on the Integration Composer application server before you install the Integration Composer. Because the following software might adversely affect installation, you should disable these programs before attempting to install the Integration Composer:! antivirus software, such as Norton or Symantec! Dell OpenManage! pcanywhere Use of these software programs adversely affects InstallAnywhere s ability to install programs; the problem is not specific to the Integration Composer. Copyright IBM Corp. 2007 2-1
Installation Checklist Installation Checklist This checklist provides an overview of the installation process for release 6.2.1 of the Integration Composer. [ ] 1 Download the IBM Maximo Integration Composer 6.2.1 setup.exe file from Support Online or insert the IBM Maximo Integration Composer 6.2.1 CD-ROM into your computer. [ ] 2 Install Integration Composer release 6.2.1. [ ] 3 Verify that the Integration Composer application starts successfully. Installing IBM Maximo Integration Composer 6.2.1 To install the Integration Composer, locate the setup.exe file on the Integration Composer CD-ROM or download this file from Support Online. To install the Integration Composer, complete the following steps: 1 Double-click setup.exe to begin the installation. 2 The installer displays the Introduction dialog box, as shown in the following figure. Windows Introduction Dialog Box 3 In the Introduction dialog box, click Next. The installer displays the Choose Install Folder dialog box, as shown in the following figure. 2-2 IBM Maximo Integration Composer: Installation Guide
Choose Install Folder Dialog Box Installing IBM Maximo Integration Composer 6.2.1 4 In the Choose Install Folder dialog box, accept the default location or enter a file path to specify the location where you installed Integration Composer. You can click Choose to browse to the desired location. 5 After you specify an installation location, click Next. The installer displays the Database Type dialog box. Database Type Dialog Box Installing IBM Maximo Integration Composer Release 6.2.1 2-3
Installing IBM Maximo Integration Composer 6.2.1 6 In the Database Type dialog box, select the type for the database you will use with the Integration Composer and click Next. The installer displays the Database Login Information dialog box. In this dialog box, you define parameters for connecting to the Maximo database. Database Login Information Dialog Box The fields displayed in this dialog box vary depending on the type of database you use. Oracle Database The following table lists the fields the installer displays for an Oracle database. Field Database Server Name Port Number Database Name (SID) Database/Schema Owner Database Username Description Name of the server on which the Maximo database resides. Port number of the server on which the Maximo database resides. Session identifier for the database; that is, the database instance. Database/schema owner. Valid user name for signing in to the Maximo database. 2-4 IBM Maximo Integration Composer: Installation Guide
Installing IBM Maximo Integration Composer 6.2.1 SQL Server Database The following table lists the fields the installer displays for a SQL Server database. Field Database Server Name Port Number Database Name Database Username Description Name of the server on which the Maximo database resides. Port number of the server on which the Maximo database resides. Name of the database. Valid user name for signing in to the Maximo database. DB2 Database The following table lists the fields the installer displays for a DB2 database. Field Database Server Name Port Number Database Name Database Username Database/Schema Owner Description Name of the server on which the Maximo database resides. Port number of the server on which the Maximo database resides. Name of the database. Valid user name for signing in to the Maximo database. Database/schema owner. NOTE Make note of the values entered here. When you launch Integration Composer, you use the values entered in these fields to define connection parameters for the target Maximo data source. 7 In the Database Login Information dialog box, enter login specifications for the database and click Next. The installer displays the Update Software Instances dialog box, as shown in the following figure. Installing IBM Maximo Integration Composer Release 6.2.1 2-5
Installing IBM Maximo Integration Composer 6.2.1 Update Software Instances Dialog Box 8 In the Update Software Instances dialog box, select one of the following options and click Next:! Yes, disable software updates If you select this option, when the Integration Composer imports data into Maximo, it inserts or deletes software records, but it does not update software records. This is the preferred option.! No, don t disable software updates If you select this option, when the Integration Composer imports data into Maximo, it updates existing software records. 2-6 IBM Maximo Integration Composer: Installation Guide
Installing IBM Maximo Integration Composer 6.2.1 After you click Next, the installer displays the Pre-Installation Summary dialog box, as shown in the following figure. Pre-Installation Summary Dialog Box 9 In the Pre-Installation Summary dialog box, review the installation details and click Next. The installer displays the Installing IBM Maximo Integration Composer progress dialog box, as shown in the following figure. Installing IBM Maximo Integration Composer Dialog Box NOTE If necessary, you can click Cancel to end the installation. Installing IBM Maximo Integration Composer Release 6.2.1 2-7
Installing IBM Maximo Integration Composer 6.2.1 10 When the installation is complete, the installer displays the Install Complete dialog box, as shown in the following figure. Install Complete Dialog Box 11 Click Next. The installer displays the Update IBM Maximo Integration Composer dialog box. Update IBM Maximo Integration Composer Dialog Box By default, the Check for Updates to IBM Maximo Integration Composer check box is selected. 2-8 IBM Maximo Integration Composer: Installation Guide
Installing IBM Maximo Integration Composer 6.2.1 12 In the Update IBM Maximo Integration Composer dialog box, select one of the following options:! To complete the installation without checking for updates, clear the Check for Updates to IBM Maximo Integration Composer check box and click Done. The installer closes the dialog box. The installation is complete.! To check for updates, complete the following steps: a Verify that the Check for Updates to IBM Maximo Integration Composer check box is selected and click Done. The installer displays the Welcome to PowerUpdate dialog box, as shown in the following figure. Welcome to PowerUpdate Dialog Box b In the Welcome to PowerUpdate dialog box, click Next. PowerUpdate checks for updates, which you can choose to install. You can access the application from the Start menu by selecting Start>Programs>IBM Maximo>Integration Composer>IBM Maximo Integration Composer. Installing IBM Maximo Integration Composer Release 6.2.1 2-9
Verifying Installation Verifying Installation To verify that IBM Maximo Integration Composer 6.2.1 is installed correctly, use the following procedure: 1 Sign in to the Integration Composer application. 2 From the Help menu in the Integration Composer main window, select About. Integration Composer displays the About Integration Composer window. 3 Verify that the number in the Version field is 6.2.1. If Integration Composer displays this number, Integration Composer 6.2.1 was successfully installed. 2-10 IBM Maximo Integration Composer: Installation Guide
Upgrading to Integration 3 Composer Release 6.2.1 Release 6.2.1 Updates This chapter provides instructions for upgrading an existing Integration Composer installation to release 6.2.1 of the IBM Maximo Integration Composer. IBM Maximo Integration Composer 6.2.1 provides support for IBM DB2. Integration Composer 6.2.1 also provides a new mapping feature. Users can create a mapping that inserts only assets, computers, network devices or network printers not moved in previous runs. To use this feature, you must select Insert Only from the Select Action menu in the Mapping window when creating a mapping. Then when you execute the mapping, Integration Composer inserts only new deployed assets (computers, network devices or network printers) or assets. It does not update existing deployed assets or assets. NOTE This feature only works on data sources that contain a last scan date. Upgrade Prerequisites This release also includes program fixes for reported issues. Upgrades to the Maximo database are implemented by Maximo 6.2.1. Upgrade Checklist Before installing this update, you must install Integration Composer 6.0 or later. This checklist summarizes the upgrade process for release 6.2.1 of the Integration Composer. You will find detailed instructions later in this chapter. [ ] 1 Back up the entire Integration Composer installation folder. [ ] 2 Install Integration Composer release 6.2.1. [ ] 3 Verify that Integration Composer was updated correctly. Copyright IBM Corp. 2007 3-1
Upgrading to Integration Composer Release 6.2.1 Upgrading to Integration Composer Release 6.2.1 This section of the installation guide explains how to upgrade to Integration Composer release 6.2.1 in a Windows environment. Before You Begin Upgrading to Release 6.2.1 Before you install Integration Composer 6.2.1, create a backup for your entire Integration Composer installation folder. You can upgrade to Integration Composer 6.2.1 using one of the following options:! Locate the setup.exe file on the Integration Composer CD-ROM or download this file from Support Online, then use the file to upgrade your installation.! Use PowerUpdate, which is located in your Integration Composer installation directory, to upgrade the installation. To upgrade to Integration Composer release 6.2.1, complete the following steps: 1 Select one of the following options:! To upgrade using the setup.exe file that you downloaded from Support Online or that you loaded from the Integration Composer CD-ROM, complete the following steps: a In Windows Explorer, locate the setup.exe file and double-click setup.exe to begin the installation. The update program displays the IBM Maximo Integration Composer Introduction dialog box. b Go to step 2 on page 3-5.! To upgrade using PowerUpdate, complete the following steps: a On the server where you installed the Integration Composer, navigate to the following location: <installdir>\powerupdateclient where <installdir> is the Integration Composer installation directory. b In the PowerUpdateClient folder, double-click the following file: update.exe The update program displays the Welcome to PowerUpdate dialog box, as shown in the following figure. 3-2 IBM Maximo Integration Composer: Installation Guide
Welcome to PowerUpdate Dialog Box Upgrading to Integration Composer Release 6.2.1 c In the Welcome to PowerUpdate dialog box, click Next. The update program displays the Checking for Update dialog box, as shown in the following figure. Checking for Update Dialog Box d If an update is available, the update program displays the Update Available dialog box, as shown in the following figure. Upgrading to Integration Composer Release 6.2.1 3-3
Upgrading to Integration Composer Release 6.2.1 Update Available Dialog Box e To retrieve updates, in the Update Available dialog box, click Next. As the update program retrieves the updated files, it displays the Updating dialog box, as shown in the following figure. Updating Dialog Box f When the update program has completed downloading the update, it displays the Updater Retrieved dialog box, as shown in the following figure. 3-4 IBM Maximo Integration Composer: Installation Guide
Upgrading to Integration Composer Release 6.2.1 Updater Retrieved Dialog Box g To run the updater, in the Updater Retrieved dialog box, click Next. The update program displays the Introduction dialog box as shown in the following figure. Windows Introduction Dialog Box 2 In the Introduction dialog box, click Next. The update program displays the Choose Install Folder dialog box, as shown in the following figure. Upgrading to Integration Composer Release 6.2.1 3-5
Upgrading to Integration Composer Release 6.2.1 Choose Install Folder Dialog Box 3 In the Choose Install Folder dialog box, accept the default location or enter a file path to specify the location where you installed Integration Composer. You can click Choose to browse to the desired location. 4 After you specify an installation location, click Next. The update program displays the Update Software Settings dialog box, as shown in the following figure. Update Software Settings Dialog Box 3-6 IBM Maximo Integration Composer: Installation Guide
Upgrading to Integration Composer Release 6.2.1 5 In the Update Software Settings dialog box, select one of the following options and click Next:! No Select this option if you do not want to change the previous software settings. If you select this option the update program displays the Installing IBM Maximo Integration Composer dialog box as it installs the modification. When the upgrade is complete, the update program displays the Installation Complete dialog box. Go to step 11 on page 3-12.! Yes Select this option to change the previous Integration Composer settings, for example database type. The update program displays the Database Type dialog box. Database Type Dialog Box 6 In the Database Type dialog box, select the type for the database you will use with the Integration Composer and click Next. The update program displays the Database Login Information dialog box. On this dialog box, you define parameters for connecting to the Maximo database. Upgrading to Integration Composer Release 6.2.1 3-7
Upgrading to Integration Composer Release 6.2.1 Database Login Information Dialog Box The fields displayed in this dialog box vary depending on the type of database you use.! For a description of the fields for an Oracle database, see Oracle Database on page 2-4.! For a description of the fields for an SQL Server database, see SQL Server Database on page 2-5.! For a description of the fields for a DB2 database, see DB2 Database on page 2-5. NOTE Make note of the values entered here. When you launch Integration Composer, you use the values entered in these fields to define connection parameters for the target Maximo data source. 7 In the Database Login Information dialog box, enter login specifications for the database and click Next. The update program displays the Update Software Instances dialog box, as shown in the following figure. 3-8 IBM Maximo Integration Composer: Installation Guide
Update Software Instances Dialog Box Upgrading to Integration Composer Release 6.2.1 8 In the Update Software Instances dialog box, select one of the following options and click Next:! Yes, disable software updates If you select this option, when the Integration Composer imports data into Maximo, it inserts or deletes software records, but it does not update software records. This is the preferred option.! No, don t disable software updates If you select this option, when the Integration Composer imports data into Maximo, it updates existing software records. Upgrading to Integration Composer Release 6.2.1 3-9
Upgrading to Integration Composer Release 6.2.1 After you click Next, the update program displays the Pre-Installation Summary dialog box, as shown in the following figure. Pre-Installation Summary Dialog Box 9 In the Pre-Installation Summary dialog box, review the installation details and click Install. The update program displays the Installing IBM Maximo Integration Composer progress dialog box, as shown in the following figure. Installing IBM Maximo Integration Composer Dialog Box NOTE If necessary, you can click Cancel to end the installation. 3-10 IBM Maximo Integration Composer: Installation Guide
Upgrading to Integration Composer Release 6.2.1 As the update program installs Integration Composer 6.2.1, it displays the Overwrite Existing File dialog box, which gives you the option to overwrite the existing Integration Composer properties file (fusion.properties). Overwrite Existing File Dialog Box The following buttons are available on this dialog box: Button No No to All Yes to All Yes Description Select this button if you do not want the update program to overwrite the existing fusion.properties file. (Does not apply. Used when overwriting multiple files.) (Does not apply. Used when overwriting multiple files.) Select this button if you do want the update program to overwrite the existing fusion.properties file. 10 In the Overwrite Existing Files dialog box, select one of the following options:! No, if you do not want the update program to overwrite the existing fusion.properties file.! Yes, if you want the update program to overwrite the existing fusion.properties file. The update program closes the Overwrite Existing Files dialog box and completes the update. Upgrading to Integration Composer Release 6.2.1 3-11
Upgrading to Integration Composer Release 6.2.1 11 When the update is complete, the update program displays the Patch Update Complete dialog box, as shown in the following figure. Patch Update Complete Dialog Box 12 In the Patch Update Complete dialog box, click Done. The update program closes the dialog box. The update is complete. 3-12 IBM Maximo Integration Composer: Installation Guide
Verifying Installation Verifying Installation To verify that IBM Maximo Integration Composer 6.2.1 is installed correctly, complete the following steps: 1 Sign in to the Integration Composer application. 2 From the Help menu in the Integration Composer main window, select About. Integration Composer displays the About Integration Composer window. 3 Verify that the number in the Version field is 6.2.1. If Integration Composer displays this number, Integration Composer 6.2.1 was successfully installed. Upgrading to Integration Composer Release 6.2.1 3-13
Verifying Installation 3-14 IBM Maximo Integration Composer: Installation Guide
Uninstalling IBM Maximo 4 Integration Composer This chapter provides instructions for removing the Integration Composer application. NOTE When the uninstall utility removes the Integration Composer, one or more files might remain in the Integration Composer installation directory. You can delete these files. Uninstalling IBM Maximo Integration Composer When you install IBM Maximo Integration Composer, the installer also installs a utility to remove the Integration Composer application. For release 6.2.1, this utility is stored in the Uninstall_Integration_Composer folder in the Integration Composer installation directory. If you installed a release of Integration Composer (Maximo Fusion) prior to release 6.2, the utility is stored in the Uninstall_Maximo Fusion Release 6.0 directory. To remove Integration Composer, complete the following steps: 1 In Microsoft Windows Explorer, go to the appropriate uninstall folder:! For installations prior to release 6.2: <InstallDir>Uninstall_Maximo Fusion Release 6.0! For release 6.2 installations: <InstallDir>Uninstall_Integration_Composer 2 In the uninstall folder, double-click the appropriate uninstall file:! For installations prior to release 6.2: Uninstall_Maximo_Fusion.exe! For release 6.2 installations: Uninstall_Integration_Composer.exe. 3 The Integration Composer utility for uninstalling the application displays the Uninstall IBM Maximo Integration Composer dialog box, as shown in the following figure. Copyright IBM Corp. 2007 4-1
Uninstalling IBM Maximo Integration Composer Uninstall IBM Maximo Integration Composer Dialog Box 4 To uninstall Integration Composer, click Uninstall. The uninstall utility displays an Uninstall IBM Maximo Integration Composer progress dialog box as it removes the application. Uninstall IBM Maximo Integration Composer Progress Dialog Box NOTE If necessary, you can click Cancel to end the process. 4-2 IBM Maximo Integration Composer: Installation Guide
Uninstalling IBM Maximo Integration Composer 5 When the removal of the Integration Composer is complete, the uninstaller displays the Uninstall Complete dialog box, as shown in the following figure. Uninstall Complete Dialog Box 6 Click Done. Removal of IBM Maximo Integration Composer is finished. NOTE When the utility removes Integration Composer, one or more files might remain in the installation directory. You can delete these files. Uninstalling IBM Maximo Integration Composer 4-3
Uninstalling IBM Maximo Integration Composer 4-4 IBM Maximo Integration Composer: Installation Guide
Notices This information was developed for products and services offered in the U.S.A. IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-ibm product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: IBM World Trade Asia Corporation Licensing 2-31 Roppongi 3-chome, Minato-ku Tokyo 106-0032, Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-ibm Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Copyright IBM Corp. 2007 Notices-1
Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation 2Z4A/101 11400 Burnet Road Austin, TX 78758 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Information concerning non-ibm products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-ibm products. Questions on the capabilities of non-ibm products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. If you are viewing this information softcopy, the photographs and color illustrations may not appear. Trademarks AIX, IBM, IBM Corporation, the IBM logo, Tivoli, and WebSphere are registered trademarks of the International Business Machines Corporation in the United States, other countries, or both. Intel, the Intel logo, and Pentium are registered trademarks of the Intel Corporation in the United States, other countries, or both. Microsoft, Windows, and Internet Explorer are registered trademarks of Microsoft Corporation in the United States, other countries, or both. Notices-2 IBM Maximo Integration Composer: Installation Guide
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. Sun, Sun Microsystems, the Sun logo, and Solaris are trademarks of Sun Microsystems, Inc. Linux is a trademark of Linus Torvalds in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Other company, product, and service names may be trademarks or service marks of others. Notices-3
Notices-4 IBM Maximo Integration Composer: Installation Guide