www.sdl.com SDL Studio GroupShare 2015 Release Notes
Legal Notice Copyright 2000-2015 SDL Group. SDL Group means SDL PLC. and its subsidiaries and affiliates. All intellectual property rights contained herein are the sole and exclusive rights of SDL Group. All references to SDL or SDL Group shall mean SDL PLC. and its subsidiaries and affiliates details of which can be obtained upon written request. All rights reserved. Unless explicitly stated otherwise, all intellectual property rights including those in copyright in the content of this website and documentation are owned by or controlled for these purposes by SDL Group. Except as otherwise expressly permitted hereunder or in accordance with copyright legislation, the content of this site, and/or the documentation may not be copied, reproduced, republished, downloaded, posted, broadcast or transmitted in any way without the express written permission of SDL. SDL Studio GroupShare is a registered trademark of SDL Group. All other trademarks are the property of their respective owners. The names of other companies and products mentioned herein may be the trademarks of their respective owners. Unless stated to the contrary, no association with any other company or product is intended or should be inferred. This product may include open source or similar third-party software, details of which can be found by clicking the following link Acknowledgments. Although SDL Group takes all reasonable measures to provide accurate and comprehensive information about the product, this information is provided as-is and all warranties, conditions or other terms concerning the documentation whether express or implied by statute, common law or otherwise(including those relating to satisfactory quality and fitness for purposes) are excluded to the extent permitted by law. To the maximum extent permitted by law, SDL Group shall not be liable in contract, tort(including negligence or breach of statutoryduty)orotherwiseforanyloss,injury,claimliabilityordamageofanykindorarisingoutof,orinconnectionwith,the use or performance of the Software Documentation even if such losses and/or damages were foreseen, foreseeable or known, for:(a)lossof,damagetoorcorruptionofdata,(b)economicloss,(c)lossofactualoranticipatedprofits,(d)lossofbusiness revenue,(e) loss of anticipated savings,(f) loss of business,(g) loss of opportunity,(h) loss of goodwill, or(i) any indirect, special, incidental or consequential loss or damage howsoever caused. All Third Party Software is licensed"as is." Licensor makes no warranties, express, implied, statutory or otherwise with respect to the Third Party Software, and expressly disclaims all implied warranties of non-infringement, merchantability and fitness for a particular purpose. In no event will Licensor be liable for any damages, including loss of data, lost profits, cost of cover or other special, incidental, consequential, direct, actual, general or indirect damages arising from the use of the Third Party Software or accompanying materials, however caused and on any theory of liability. This limitation will apply even if Licensor has been advised of the possibility of such damage. The parties acknowledge that this is a reasonable allocation of risk. Information in this documentation, including any URL and other Internet Web site references, is subject to change without notice. Without limiting the rights under copyright, no part of this may be reproduced, stored in or introduced into a retrieval system, or transmitted in any form or by any means(electronic, mechanical, photocopying, recording, or otherwise), or for any purpose, without the express written permission of SDL Group. ii SDL Studio GroupShare 2015
Contents Chapter1 Productoverview... 1 Chapter2 What'snewinSDLStudioGroupShare2015?... 3 FlexibleProjectArchivingandDetaching... 3 AssignmentfunctionalityaddedtoRESTAPI... 3 ModernlookandimprovedUXfortheGroupShareWebUI... 4 Abilitytomulti-selectTranslationMemoriesinGroupShareWebUI... 4 ImprovedTMsearchperformance... 4 Check-incommentsarenowincludedine-mailnotifications... 4 TheTMMaintenancetaskrecomputesfuzzystatistics... 4 ChangeddefaultlistorderintheProjectsandBackgroundTasksviews... 5 SecureentryclassesforMultiTermServer... 5 NewpermissionsinMultiTermServer... 5 Robustlicensingsystem... 5 ChangeuserpasswordsusingtheRESTAPI... 5 Notificatione-mailsforprojectscreatedusingtheRESTAPI... 6 Chapter3 Resolvedissues... 7 Chapter4 Knownissues... 9 Chapter5 InstallingSDLStudioGroupShare... 11 Supportedoperatingsystems... 11 Supporteddatabaseservers... 11 InstallingGroupShare2015... 12 Chapter6 LicensingGroupShare2015... 13 LicensingGroupShare2015fromGroupShare2014... 13 Chapter7 Compatibility... 15 Chapter8 Aboutthisrelease... 17 Chapter9 Supportedreleases... 19 Chapter10 UpgradingtoGroupShare2015... 21 UpgradingfromGroupShare2011toGroupShare2015... 21 SDL Studio GroupShare 2015 iii
UpgradingfromGroupShare2014toGroupShare2015... 23 Chapter11 Furtherinformation... 25 Help... 25 ContactingtheTechnicalSupportteam... 25 AppendixA Acknowledgements... 27 iv SDL Studio GroupShare 2015
Chapter 1 Product overview SDL Studio GroupShare is a collaboration platform for teams of project managers and translators/reviewers. SDL Studio GroupShare enables you to easily share translation projects, translation memories and terminology with your team members team, regardless of their location. SDL Studio GroupShare incorporates: TM Server for sharing translation memories MultiTerm Server for sharing termbases Project server for sharing translation projects For more information, see the SDL Studio GroupShare presentation page on the SDL website. Product names For better readability, this document uses the short names of the following SDL products: SDL Studio GroupShare- GroupShare SDL MultiTerm Online- MultiTerm Online SDL Studio GroupShare Console- GroupShare Console SDL Trados Studio- Studio SDL Passolo 2015- Passolo SDL Studio GroupShare 2015 1
Product overview 2 SDL Studio GroupShare 2015
Chapter 2 What'snewinSDLStudio GroupShare 2015? This section provides an overview of the new features, enhancements and other changes introduced in the 2015 version of GroupShare. Flexible Project Archiving and Detaching GroupShare 2015 adds a new feature for project managers that handle a large number of projects. In order to increase the application s performance and unclutter the projects list, you can now archive old projects and keep them from being pulled into Studio's project list. An automated nightly background task checks for projects that have been completed for morethanasetperiodoftimeandthenarchivesthem.userswitheditprojectpermission canalsomanuallyarchiveorrestoreaprojectfromthewebui. Users with Delete Project permission can also remove a project entirely from the GroupSharedatabaseandstoreitasapackageinasetlocationbyusingthenewdetaching feature. Detached projects cannot be restored into live projects as easily as Archived projects. However, because we keep every file version of the detached project on the file system, youcanusethisasbasis,i.e.youcantakeanybilingualfilefromthedetachedproject, createanewprojectbasedonthisfilebyusingsdltradosstudioandre-uploadthe project to the GroupShare server. Assignment functionality added to REST API The GroupShare REST API has been extended to offer functionality around assignment. YoucannowassignfilestoGroupShareusersthroughtheAPIwithouttheneedofusing SDL Trados Studio manually to perform assignments. This unlocks new possibilities such as predefining assignments as well as dynamically assigning permissions to users based on assignments as now both User Management and Assignment are supported through the REST API. SDL Studio GroupShare 2015 3
What's new in SDL Studio GroupShare 2015? ModernlookandimprovedUXforthe GroupShare Web UI GroupShare 2015 has a refreshed user interface with new flat-style icons and a contemporary look and feel. Ability to multi-select Translation Memories in GroupShare Web UI YoucannowselectmultipleTMsanddeletetheminonego,aswellasbeingableto schedule exports of those TMs. Improved TM search performance WhenyoucreateanewtranslationmemoryinGroupShare,thesliderfromtheTM Settings > Performance and Tunning > Advanced Tuning section is now set by default to Speed rather than Accuracy. Thisonlyaffectsresultsofverylowfuzzymatches.Iftheseareimportanttoyou,youcan manually change the setting towards Accuracy. Check-in comments are now included in e-mail notifications The comments you attach when checking in documents to GroupShare now get included in the e-mail notification. The TM Maintenance task recomputes fuzzy statistics When the nightly TM Maintenance task runs, it now also automatically recomputes fuzzy statistics for TMs if necessary. 4 SDL Studio GroupShare 2015
What's new in SDL Studio GroupShare 2015? Changed default list order in the Projects and Background Tasks views ProjectsandbackgroundtasksarenowlistedbynewestfirstontheWebUI. Secure entry classes for MultiTerm Server Forallapplicationsthatconnecttoaservertermbase,termsarenotlistedinthebrowse paneanymoreiftheuserdoesnothaveaccesstothespecificentryclasssetforthoseterms. New permissions in MultiTerm Server In SDL MultiTerm Administrator, you can now define permissions for specific roles to merge and copy entries as well as delete content in specific language blocks. Robust licensing system GroupShare 2015 uses a new licensing system based on third-party technology from SafeNet. The new licensing mechanism provides an enhanced licensing robustness and is inlinewiththerestofsdl sproducts. GroupShare 2015 discontinues support for the Nalpeiron-based licensing system. For information on migrating to the new network licensing technology, log a support request via SDL Account > Support & Education > Support. Change user passwords using the REST API With this REST API option, third-party applications can now manage and synchronize GroupShare users centrally. SDL Studio GroupShare 2015 5
What's new in SDL Studio GroupShare 2015? Notification e-mails for projects created usingtherestapi Projects created using the REST API now send notification e-mails to the assigned user. 6 SDL Studio GroupShare 2015
Chapter 3 Resolved issues GroupShare 2015 contains all previous cumulative updates for GroupShare 2014(all versions) and GroupShare 2011. Future hotfixes will be described in the Cumulative Updates for GroupShare 2015 Knowledge Base article. The list below lists these cumulative updates, as well as other key fixes and enhancements: GroupShare Improved stability and performance when working with thousands of users and TMs. Addressed security issues around SQL injections and parameter validation. E-mailvalidationinWebUInolongerfailswithnewdomainnames(e.g. *.newyork). Enhanced robustness when deleting server termbases. MultiTerm Online De-activating a filter inmultiterm Online now works properly. Fixed crash when using Duplicate filters. Fixed issue with incorrect search results after switching profile. Fixed issue with multimedia items not displaying when using custom input models. SDL Studio GroupShare 2015 7
Resolved issues 8 SDL Studio GroupShare 2015
Chapter 4 Known issues The table below lists the limitations and known issues associated with the 2015 release. These are the issues that SDL considers important to resolve, but not serious enough to delay this release. The GroupShare development team will prioritize these issues in a future release of the software. GroupShare Console TheportnumberintheSettingsbranchdefaultsto0ifyoudonotconfigurethe Project Server Notifications Settings section. This invalid value makes the GroupShare Console generate an error when you try to apply any other changes you make on the Settings branch. Delete this value or configure the Notifications Settings sectionwiththedetailsofyoursmtpservertosavethechangesyoumakeonthe Settings page. SDL Studio GroupShare 2015 9
Known issues 10 SDL Studio GroupShare 2015
Chapter 5 Installing SDL Studio GroupShare This section contains general information about installing SDL Studio GroupShare 2015 and the technical requirements for the installation. About this task For step-by-step instructions in how to install and maintain GroupShare, see the GroupShare Installation Guide. Supported operating systems The list of operating systems you can install GroupShare 2015 on. The GroupShare server modules run on the following platforms: Windows Server 2012 R2, with IIS 8.5 Windows Server 2012, with IIS 8.0 Windows Server 2008 R2, with IIS 7.5 Supported database servers Overview of the database requirements for a GroupShare installation. GroupShare supports the following SQL Server versions: SQL Server 2014 SQL Server 2012 SQL Server 2008 SDLrecommendsthatyouusethelatestSPversionsofSQLServer2014,2012and 2008. GroupShare may have performance issues if you use earlier versions of these SQL Server releases. MakesurethattheSQLServerthatyouuseforrunningGroupSharehasthefulltext search engine installed. MultiTerm requires this for fully supporting the Full Text Search option. SDL Studio GroupShare 2015 11
Installing SDL Studio GroupShare IfyouplantouseSQLExpress,makesurethatyouusetheAdvancedServicesedition. For SQL Express 2014, see for instance Download Microsoft SQL Server 2014 Express. For more information on the prerequisites for installation, see the GroupShare Installation Guide. Installing GroupShare 2015 Ensure that you have administrator permissions and that no other software is running while you install GroupShare. You can find a full list of software installed with this application, including any third-party software GroupShare Installation Guide. Download location You can download the GroupShare installer from your SDL Account. Installation instructions To install GroupShare, follow the instructions in GroupShare Installation Guide. Installation issues For information on resolving installation issues, see the SDL Knowledge Base. 12 SDL Studio GroupShare 2015
Chapter 6 Licensing GroupShare 2015 You can use GroupShare 2015 with a softkey license based on an activation code. Fordetailsonhowthesoftkeylicensemechanismworksandhowtoobtainandinstall softkey licenses, see the SDL Licensing documentation at and the licensing videos on the SDL Trados Youtube channel. Licensing GroupShare 2015 from GroupShare 2014 GroupShare 2015 uses a new type of activation code. This means that after upgrading from GroupShare 2014 to GroupShare 2015, you have to use the new activation code provided to you. SDL Studio GroupShare 2015 13
Licensing GroupShare 2015 14 SDL Studio GroupShare 2015
Chapter 7 Compatibility GroupShare 2015 supports all versions of Studio 2014 and Studio 2015 and all versions of MultiTerm 2014 and MultiTerm 2015. Compatible products/ Module Studio 2014-2015 MultiTerm 2014-2015 Passolo 2015 TMS2011SP6 CU1 WorldServer 10.x MultiTerm Server TM Server yes yes yes yes no no yes yes no yes no no yes no no Project Server SDL Studio GroupShare 2015 15
Compatibility 16 SDL Studio GroupShare 2015
Chapter 8 About this release Tofindoutwhat'snewinthereleaseofSDLMultiTerm,seetheReleaseNotesPDF. This document also explains which issues were resolved, which issues are known to still exist, and how to upgrade to MultiTerm 2015 from earlier releases. SDL Studio GroupShare 2015 17
About this release 18 SDL Studio GroupShare 2015
Chapter 9 Supported releases GroupShare 2015 is the active GroupShare release. SDL continues to support GroupShare 2014 as the mature release. However, following the release of GroupShare 2015, SDL has moved GroupShare 2011 to a retired state. SDL does not provide technical assistance, issue service packs or hotfixes for retired releases. For GroupShare 2015, SDL will release service packs as and when required. If you are using Oracle database back-ends, continue to use GroupShare 2011 Oracle. GroupShare 2011 Oracle remains the active release for Oracle. SDL Studio GroupShare 2015 19
Supported releases 20 SDL Studio GroupShare 2015
Chapter 10 Upgrading to GroupShare 2015 Upgrading from GroupShare 2011 to SDL Studio GroupShare 2015 21
Upgrading to GroupShare 2015 GroupShare 2015 These are some things to take note of when performing the upgrade from GroupShare 2011 to GroupShare 2015. Prerequisites Before upgrading to GroupShare 2015, make sure that your GroupShare 2011 version is using Cumulative Update patch 3(or higher). Deprecated roles When you upgrade from GroupShare 2011 to GroupShare 2015, your existing roles and permissions are updated with new roles and permissions introduced in GroupShare 2014. The standard MultiTerm roles are no longer available. This is because GroupShare 2014givesMultiTermaccesstoalltheuserswhoaremembersofaGroupSharerole. However, the level of access to MultiTerm termbases is still controlled by the permissions granted in MultiTerm Administrator. Extra permissions GroupShare updates the standard and custom roles available for 2011 projects with the View All Files and the View Other Users permission. These cover the functionality oftheoldviewprojectandviewuserpermissionsandallowsdltradosstudio users with these permissions access to the required project data when opening 2011 projects in SDL Trados Studio 2014 and later. Migrated projects While we recommend that you complete any existing 2011 projects before upgrading, 2011 projects are automatically migrated to GroupShare 2015. These projects will not have GroupShare assignment functionality when used in GroupShare 2014 and later. Adding assignment functionality You can add GroupShare assignment functionality to GroupShare 2011 projects at any time, by opening the projects in SDL Trados Studio and creating assignments for the 2011 project files. However, if you then still have users working with SDL Trados Studio 2011, grant them View All Files permission. 22 SDL Studio GroupShare 2015
Upgrading to GroupShare 2015 Upgrading from GroupShare 2014 to GroupShare 2015 Installing GroupShare 2015 upgrades any existing GroupShare 2014 installation. However, GroupShare remembers all your projects, resources and settings when you migrate from any older version of GroupShare to GroupShare 2015. SDL Studio GroupShare 2015 23
Upgrading to GroupShare 2015 24 SDL Studio GroupShare 2015
Chapter 11 Further information Help GroupShare Help If you are online, you can search all our product documentation, including the Knowledge Base in the GroupShare online Help. SDL Trados Studio Help IfyouareworkingwithStudioprojects,youmayfindtheonlineHelpforStudio useful. MultiTerm Help See the MultiTerm online Help for more information on working with termbases. Contacting the Technical Support team See SDL Language Technologies Support for information on how to get technical support. SDL Studio GroupShare 2015 25
Further information 26 SDL Studio GroupShare 2015
Appendix A Acknowledgements SDL Studio GroupShare includes open source or similar third-party software. #ziplib #ziplib(sharpziplib, formerly NZipLib) is a Zip, GZip, Tar and BZip2 library writtenentirelyinc#forthe.netplatform.itisimplementedasanassembly (installable in the GAC), and thus can easily be incorporated into other projects(in any.net language). Apache log4net TheApachelog4netlibraryisatooltohelptheprogrammeroutputlogstatementsto avarietyofoutputtargets.log4netisaportoftheapachelog4j frameworktothe Microsoft.NET runtime. ICU- International Components for Unicode WiX ICUisamature,widelyusedsetofC/C++andJavalibrariesprovidingUnicodeand Globalization support for software applications. ICU is widely portable and gives applications the same results on all platforms and between C/C++ and Java software. The WiX toolset builds Windows installation packages from XML source code. The toolset integrates seamlessly into build processes. SafeNet Sentinel SafeNet's Sentinel software licensing products and software protection solutions provides software publishers control and visibility into how their applications are deployed and used. SDL Studio GroupShare 2015 27
Learn more at SDL.com. Follow SDL on Facebook and Twitter. SDL (LSE: SDL) is the leader in global customer experience. With a completely integrated cloud solution for content management, analytics, language and documentation, SDL solves the complexity of managing your brand s digital footprint as it grows across multiple languages, cultures, websites, devices and channels. Seventy-nine of the top 100 global companies trust SDL to help them create authentic, in-context customer experiences that drive demand and loyalty. SDL brings your brand to the world, and the world to your brand. Copyright 2015 SDL plc. All Rights Reserved. All company product or service names referenced herein are properties of their respective owners. GS_2015_releasenotes_A4