MEMORY CARD CONNECTORS (PCMCIA CONFORMABLE) 560H SERIES FEATURES The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer Memory Card International Association (PCMCIA) standards Ver. 4. Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.). Incorrect insertion is prevented. Hot system plugging is possible (contact detection). Plugs have an easy-to-use ejection mechanism. Raised mounting type connectors (under which components can be mounted) and low-profile connectors are available. In addition to connectors for type I and type II cards, a connector for type III cards has been provided. The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided mounting are available. SPECIFICATIONS PIN CONNECTOR (PLUG) CONTACT LENGTH Item Operating temperature range Current rating Voltage rating Contact resistance Insulation resistance Dielectric withstanding voltage Insertion/withdrawal life Specification 55 C to + 85 C DC 0.5 A AC 250 V 40 mω max (6 VDC, 0.1 A) 1000 MΩ min. (500 VDC) 500 VAC for 1 minute Industrial environment: 5,000 times Office environment: 10,000 times Contact type Power, ground pins Card detection pins Other signal pins MATERIALS Item Pin No. 1, 17, 34, 35, 51, 68 36, 67 Others Specification Contact length 5.0 mm (0.196 in.) 3.5 mm (0.137 in.) 4.25 mm (0.167 in.) Plug body: PPS resin UL94V-0 : 6T nylon (for type III card connector) UL94V-0 Insulating material Ejector: Polyester : PPS resin (for SMT and type III card connectors) Conductor Copper alloy Contact: Gold over palladium over nickel Plating (PAGOS) Terminal: Palladium 1
ORDERING PART NUMBER [PLUG] FCN-56 5 P 068-G / XC-V4 V4: Conforms to Ver.4 E4: Conforms to Ver.4 and anti-esd Specification Plating G: Gold plating Number of contacts: 68, 136 Body P: Plug Pin type 4: Straight 5: Right-angle 8: SMT 560 series connector Fujitsu connector ORDERING PART NUMBER [SOCKET] FCN-56 8 J 068-G / 0 Terminal type 0: PC board double-sided straddle type B: PC board single-sided mounting type Plating G: Gold plating Number of contacts: 68 Body J: Socket Pin type 8: SMT 560 series connector Fujitsu connector 2
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/C-V4 0.51 (0.02) 11.2 (0.44) 1 (0.039) 4.25 (0.167) 3.5 (0.138) 41.91 (1.65) 2.5mm (0.098) deep spot facing 35.2 (1.39) 59.7(2.35) 41.91 (1.65) 7 No.51 No.2 41.91 (1.65) No.3 68- ø 1 (0.039) (Card insertion side) Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board) FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board) Long-terminal models are also available. Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.)) FCN-565P068-G/02-V4 (10 mm (0.394 in.)) Models which support Type III are also available. Part number: FCN-565P068-G/17-V4 FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board ) RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/01-V4 1.51 (0.059) 3 (0.118) 4 (0.157) 3 (0.118) 42 (1.65) 12.2 (0.48) 2- ø 2.8 (0.11) (34-1) = 41.91 (1.65) 2.5mm (0.098) deep spot facing 24.9 (0.98) 3.6 (0.141) 58.7 (2.31) (34-1) = 41.91 (1.65) No.2 41.91(1.65) No.3 Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm. In order to avoid damage to the connector, do not pull out the card at an angle. 68- ø 1 (0.039) (Card insertion side) 3
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/F-V4 0.51 (0.059) 2.5 (0.098) (2) M2.5 (0.098 in.) thread nut (34 1) = 41.91 (1.65) 1 (0.039) 35.2 (1.385) (34 1) = 41.91 (1.65) <To be mounted on back of PC board> ±0.05 (0.0039) (68/2-1) = 41.91 (1.65) No.51 4(0.157) 7 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD) Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD) 0.51 (0.059) 8 (0.315) 6 (0.236) 2- ø 2.2 (0.0866) 35.2 (1.385) (Card insertion side) 68- ø 1 (0.039) A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4 4.5 (0.177) (34 1) = 41.91 (1.65) 7 No.2 41.91 (1.65) No.3 No.51 53.7 (2.114) Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board) A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II) 8.5 (Card insertion side) 68- ø 1 (0.039) 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P068-G/A-V4 4.5 (0.177) (34 1) = 41.91 (1.65) 2.5mm (0.098) deep spot facing 35.2 (1.39) 6 (0.236) (34 1) = 41.91 (1.65) (68/2-1) = 41.91 (1.65) 6.7 (0.264) ±0 7 68- ø 1 (0.039) No.51 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE) AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE) Part number: FCN-565P136-G/0-V4 (8-1) = 13.335 (0.525) 7 7 (0.276) (0.276) 35.2 (1.39) 11 (0.433) 3 (0.118) (8-1) = 13.335 (0.525) (68/2-1) = 41.91 (1.65) 136- ø 1 (0.039) 5
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/C34-V4 7 (0.276) 2.5mm (0.098) deep spot facing *A 83.38 (3.283) 0.51 (0.02) 35.2 (1.386) 59 (2.32) *A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4 (68/2-1) = 41.91 (1.65) 68- ø 1 (0.039) 6
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black) Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black) Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige) 67.31 (2.65) 34 (1.339) 2.5mm (0.098) deep spot facing 0.51 (0.020) 83.38 (3.283) 8 (0.315) 35.2 (1.386) ø 2.8 (0.110) 4.25 (0.167) 3.5 (0.138) R 1.4 36 (1.417) 40 (1.574) 2.1 (0.083) 10 (0.394) 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) 7 8 No.51 No.52 A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4, instead of FCN-565P068-G/XC-V4. 3.7 (0.146) 11 (0.433) No.2 41.91 (1.65) No.3 4- ø 2.8 (0.110) 34 (1.339) 67.31 (2.65)~68.0 (2.677) 68- ø 1 (0.039) 40 (1.574) (Card insertion side) 7
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/MC-V4 (Button color: Black) Part number: FCN-565P068-G/C22-V4 (Button color: Beige) 67.31 (2.65) 34 (1.339) 2.5mm (0.098) deep spot facing 0.51 (0.020) 83.38 (3.283) ø 2.8 (0.110) 35.2 (1.386) 4.25 (0.167) 3.5 (0.138) R 1.4 11 (0.433) 3.7 (0.146) 36 (1.417) 40 (1.574) 8 (0.315) 10 (0.394) 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) 7 8 2.1 (0.083) No.51 No.52 Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4. No.2 41.91 (1.65) No.3 4- ø 2.8 (0.110) 34 (1.339) 67.31 (2.65)~68.0 (2.677) 68- ø 1 (0.039) 40 (1.574) (Card insertion side) 8
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/XF-V4 (Button color: Black) Part number: FCN-565P068-G/PF-V4 (Button color: Beige) 2.5 67.31 (2.65) 34 (1.339) 2.5mm (0.098) deep spot facing 0.51 (0.020) 1 (0.039) 83.38 (3.283) 8 (0.315) 35.2 (1.386) ø 2.8 (0.110) 4.25 (0.167) 3.5 (0.138) R 1.4 36 (1.417) 40 (1.574) When a card is ejected 3.7 (0.146) When a card is inserted 2.1 (0.083) 10 (0.394) 78.5 (3.091) 59 (2.323) 42 (1.654) 35.5 (1.398) MOUNTING EXAMPLE (68/2-1) = 41.91 (1.65) 4- ø 2.8 (0.110) 68- ø 1 (0.039) 40 (1.574) Nut buried 34 (1.339) 67.31 (2.65)~68.0 (2.677) Ejector button Regardless of how the connector is mounted on the PC board, a card can be inserted with its face upward. 9
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK MOUNTING TYPE) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/W-V4 0.51 (0.020) 4.5 (0.177) 67.31 (2.65) 34 (1.339) 6 (0.236) 2.5 (0.098) 2.1 (0.083) 83.38 (3.283) 8 (0.315) ø 2.8 4.25 (0.167) 3.5 (0.138) R 1.4 11 (0.433) When a card is inserted 3.7 (0.146) When a card is ejected 35.2 (1.386) 10 (0.394) 78.5 (3.091) 42 (1.654) 35.5 (1.398) 7 2.1 (0.083) No.51 2.5 (0.098) No.2 ±0.1(0.0039) 41.91 (1.65) No.3 6.7 +0 (Card insertion side) ±0.1(0.0039) 68- ø 1 (0.039) MOUNTING EXAMPLE Nut Mounting height 4.5mm(0.177in.) Nut M2.5 screw The connector is mounted on a PC board so that only its terminal connection part rests on the board. 10
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM (0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/J25-V4 (supports type I, II card) Part number: FCN-565P068-G/J25-4V (supports type I, II, III card) 0.51 (0.020) 3(0.118) 2.42 (0.095) 2- ø 2.2 (0.087) 0.2 (0.0078) 8 (0.315) 4.5 (0.177) 9 (0.354) ø 2.2, 4.5 deep 76.48 (3.011) 81.88 (3.224) 4.25 (0.167) 3.5 (0.138) 35.2 (1.386) When a card is ejected 5.2 (0.205) 12.5 (0.492) When a card is inserted 8 (0.315) 59 (2.323) 42 (1.654) 10 (0.394) 11.5 (0.453) 7 (0.276) 4.5 (0.177) 35.5 (1.398) 8 (0.315) 8.5 (0.335) MOUNTING EXAMPLE (68/2-1) = 41.91 (1.65) 3.42 (0.135) 0 0 +0 68- ø 1 (0.0394) 4 - ø 2.8 (0.110) 51.7 (2.035) +0 61.7 (2.429) 0 6.58 (0.259) 23.78 (0.936) 33.78 (1.330) 0 76.48 (3.011) ±0.1 71.88 (2.830) +0 82.88 (3.263) 0 41.7 (1.642) +0 61.7 (2.429) 0 Component mounting is prohibited in the hatched areas. Components with a height of 4.3 mm (0.169 in.) maximum can be installed under the connector. Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board. 11
0 0 560H Series Connector Conforming to Ver. 4 RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm (0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/0442-E4 (with FG clip) Part number: FCN-565P068-G/0426-V4 (with no FG clip) 2.42 (0.095) 2-R2.8 2- ø 2.6 0.2 (0.008) 2.42 (0.095) 2-R2.8 2- ø 2.6 2- ø 6 (0.236) 2- ø 2- ø 2.35 (0.0925) 3.810 (0.150) 0.51 (0.020) 7.8 (0.307) 86.31 (3.40) 79.3 (3.12) 76.31 (3.00) 6 (0.236) 35.2 (1.386) 0.77 (When a card is ejected) 8.07 (When a card is inserted) 40 (1.57) 42.81 (1.69) 2- ø 6 (0.236) 2- ø 2- ø 2.35 (0.0925) 3.810 (0.150) 0.51 (0.020) 86.31 (3.40) 79.3 (3.12) 76.31 (3.00) 6 (0.236) 35.2 (1.386) 0.77 (When a card is ejected) 8.07 (When a card is inserted) 40 (1.57) 42.81 (1.69) 0.2 (0.008) 1.2 (0.047) 8.5 (0.335) 12 (0.472) 12.9 71.85 (2.83) 10 (0.394) 59 (2.32) 42 (1.654) 35.5 (1.398) 22 (0.866) 34 (1.339) 57.51 (2.26) R4 9 (0.354) 1.2 (0.047) 8.5 (0.335) 12 (0.472) 22 (0.866) 12.9 10 (0.394) 71.85 (2.83) 59 (2.32) 42 (1.654) 35.5 (1.398) R4 34 (1.339) 9 (0.354) 2- ø 3.5 (0.138) 61.7 (2.43) 0 (68/2 1) = 41.91 (1.65) 3.42 (0.135) 0 2- ø 3.5 (0.138) 61.7 (2.43) 0 (68/2-1) = 41.91 (1.65) 3.42 (0.135) 0 76.31 (3.0) 3.810 (0.150) 2. 2- ø 2 (0.079) 68- ø 1 (0.039) 6.58 (0.259) 0 42.81 (1.69) 2- ø 4.5 (0.177) 2- ø 8 (0.315) 0 76.31 (3.0) ±0.05 (0.0020 3.810 (0.150) 2. 68- ø 1 (0.039) 6.58 (0.259) 0 2- ø 4.5 (0.177) 2- ø 8 (0.315) 0 42.81 (1.69) +0.2 (0.0079) +0.2 (0.0079) 7.8 (0.307) 2. 34 (1.339) 22 (0.866) 57.15 (2.25) Component mounting is prohibited in the hatched areas. 2. 34 (1.339) 22 (0.866) Component mounting is prohibited in the hatched areas. Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is used) to mount the connector to the board. 12
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.) RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS Part number: FCN-565P068-G/J38-E4 3.810 (0.150) 0.51 (0.020) SMT FG Clip 8 (0.315) 28.5 (1.12) 11 (0.433) 83.38 (3.28) 2.42 (0.0953) 8 (0.315) 35.2 (1.385) 11.5 (0.453) 2- ø 2.2 (0.0866) ø 2.8 (0.110) 67.31 (2.65) 34 (1.34) 10 (0.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu. R1.4 28.45 (1.12) 0.2 (0.0079) 8.5 (0.335) 40 (1.57) 2 (0.079) 1.8 (0.071) 4.5 (0.177) (68/2-1) = 41.91 (1.65) 3.810 (0.150) 4- ø 2.8 (0.110) 68- ø 1 (0.039) 28.5 (1.12) 40 (1.57) 34 (1.34) ±0.05 (0.002) 29.45 67.31 (2.65)~68.0 (2.68) 13
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS Part number: FCN-565P068-G/0221-E4 83.38 (3.28) φ 2.8 (.110) 40 (1.57) 35.2 (1.39) 11.2 (.441) φ 2.8 (.110) 1.8 (.071) 11 (.433) 67.31 (2.65) 50.8 (2.00) 34 (1.34) R1.4 10 (.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.398) No. 1 No. 34 51.7 (2.04) No. 68 No. 35 1 (.039) 40 (1.574) 1 (.039) 8 (.315) 11 (.433) 10.5 (.413) 5 (.197) 7 7 (.276) (.276) 3.810 (0.150) 0.51(0.020) 40 ±0.1 (1.57 ±.002 ) 6-0 (.236-0) 5-0(.197-0) 4.4-0 (.173-0) 9.5-0 (.347-0) 50.08 ±0.1 (2.00 ±0.004 ) 1.27 x (68/2-1) = 41.91 ±0.1 (1.65 ±0.004 ) 1.27 ±0.05 (0.05 ±0.002 ) 1.905 ±0.05 (.075 ±0.002 ) 3.810 ±0.05 (.150 ±0.002 ) 5.715 ±0.05 (.225 ±0.002 ) 51.7 +0 (2.035 +0 ) 61.7-0 (2.429-0) 75-0 (2.95-0) 68-φ 1 ±0.05 (.039 ±0.002 ) 34 ±0.05 (1.33 ±0.002 ) 67.31 +0.2 (2.65 +0.008 ) Note 3 Note 2 PCB Foot Print Viewed from Connector Side NOTE 2 NOTE 3 NOTE 4 COMPONENT CON NOT BE MOUNTED IN THIS AREA COMPONENTS THAT HAVE 5mm HEIGHT CAN BE MOUNTED IN THIS AREA UNLESS OTHERWISE SPECIFIED TOLERANCES ARE ±0.5mm (0.002 in.) 14
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.) RAISED TYPE, WITH ESD CLIPS Part number: FCN-565P068-G/0231-E4 1 (.039) 40 (1.574) 1 (.039) 8 (.315) 11 (.433) 10.5 (.413) 5 (.197) 67.31 (2.65) 50.8 (2.00) 34 (1.34) φ 2.8 (.110) 11.2 (.441) 35.2 (1.39) 40 (1.57) 83.38 (3.28) φ 2.8 (.110) 10 (.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.398) No. 1 No. 34 1.8 (.071) 11 (.433) 51.7 (2.04) No. 35 No. 68 7 7 (.276) (.276) 3.810 (0.150) 0.51(0.020) 40 ±0.1 (1.57 ±.002 ) 6-0 (.236-0) 5-0(.197-0) 4.4-0 (.173-0) 9.5-0 (.347-0) 50.08 ±0.1 (2.00 ±0.004 ) 1.27 x (68/2-1) = 41.91 ±0.1 (1.65 ±0.004 ) 1.27 ±0.05 (0.05 ±0.002 ) 1.905 ±0.05 (.075 ±0.002 ) 3.810 ±0.05 (.150 ±0.002 ) 5.715 ±0.05 (.225 ±0.002 ) 51.7 +0 (2.035 +0 ) 61.7-0 (2.429-0) 75-0 (2.95-0) 68-φ 1 ±0.05 (.039 ±0.002 ) 34 ±0.05 (1.33 ±0.002 ) 67.31 +0.2 (2.65 +0.008 ) Note 3 Note 2 PCB Foot Print Viewed from Connector Side NOTE 2 NOTE 3 NOTE 4 COMPONENT CON NOT BE MOUNTED IN THIS AREA COMPONENTS THAT HAVE 5mm HEIGHT CAN BE MOUNTED IN THIS AREA UNLESS OTHERWISE SPECIFIED TOLERANCES ARE ±0.5mm (0.002 in.) 15
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE) Part Number: FCN-565P136-G/Z-V4 (8-1) = 13.335 (0.525) 7 7 (0.276) (0.276) 2.42 (0.0953) 40 (1.57) 1 (0.039) 35.2 (1.385) 67.31 (2.65) 34 (1.34) 40 (1.57) 83.38 (3.28) 8 (0.315) 10 (0.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) 11 (0.433) 3.7 (0.146) (When a card is ejected) Connector with the left and right ejector buttons Part Number: FCN-565P 136G/005-V4 (8-1) = 13.335 (0.525) 7 7 (0.276) (0.276) 83.38 (3.28) 2.42 (0.0953) 40 (1.57) 35.2 (1.385) 1 (0.039) 3.7 (0.146) 67.31 (2.65) 34 (1.34) 40 (1.57) 11 (0.433) 11 (0,.433) 10 (0.394) 42 (1.654) 35.5 (1.398) No. 1 No. 35 10 (0.394) 42 (1.654) 35.5 (1.398) 11 (0.433) No. 34 No. 68 11 (0.433) 2.1 (0.083) No. 1 No. 35 No. 68 No. 34 (8-1) = 13.335 (0.525) (68/2-1) = 41.91 (1.65) 34 (1.339) 136- ø 1 ±0.05 67.31 (2.65) 4- ø 2.8 (0.110) 40 (1.575) 16
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS 25 (.984) 7.22 (.284) 50.6 (1.99) 11 (.433) 7 (.275) Right Button FCN-560A08 Button Color BLACK ESD 10 (.394) FCN-560A14 BEIGE 67.31 (2.650) 34 (1.34) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) φ 2.8 (.110) 8 (.315) 2.1 (.083) 4 (.157) 4 (.157) 4.8 (.189) φ 2.8 (.110) 8 (.315) 2.1 (.083) 4 (.157) Left Button FCN-560A16 Button Color BLACK ESD FCN-560A22 BEIGE 67.31 (2.650) 34 (1.34) 7.22 (.284) 51 (2.01) min. 10 (.394) 78.5 (3.09) 59 (2.32) 42 (1.65) 35.5 (1.40) 25 (.984) 50.6 (1.99) 11 (.433) 7 (.275) 4 (.157) 4.8 (.189) 17
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE Part number: FCN-564P068-G/A-V4 59.74 (2.35) 1.27 x (34-1) = 41.9 (1.65) 5.50 (.216) 3.00 (.118) 25.80 (1.016) 8.30 (.327) 7.63 (.300) 7 No.51 7.00 (.276) 44.80 (1.76) 51.80 (2.039) 2.40 (.0945) 6.00 (.236) 10.80 (.425) 1.27 x (68/2-1) = 41.91 (1.65) 1.905 (0.118) No. 35 68- Ø 1 (0.0394) 51.8 (2.039) 18
2- Ø 2.8 (0.110) 560H Series Connector Conforming to Ver. 4 STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR) Part number: FCN-564P068-G/0-V4 74 (2.91) Polarization Post 66.04 (2.6) 5.5 (0.217) 4.25 (0.167) 1 (0.039) 3.5 (0.138) 41.91 (1.65) 35.2 (1.390) 7 (0.394) 2- Ø 2.8 (0.110) 41.91 (1.65) 7 No.51 A model with the feature of preventing mismated board mounting is available. Contact Fujitsu. 6 (0.236) No.2 66.04 (2.6) 41.91 (1.65) No.3 1.905 (0.118) 68- Ø 1 (0.0394) 2- Ø 2.8 (0.110) Ø 1.00 (0.0394) used for polarization post 19
Ø 2.8 (0.110) 560H Series Connector Conforming to Ver. 4 STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR) Part number: FCN-564P068-G/X0-V4 74 (2.91) 67.31 (2.65) 83.38 (3.28) 35.2 (1.39) 66.04 (2.6) 34 (1.34) 41.91 (1.65) 3.5 (0.138) 4.25 (0.167) R1.4 2 Ø 2.8 (0.110) 11 (0.433) 8 (0.315) 36 (1.42) (When a cardis inserted) 40 (1.57) 3.7 (0.146) (When a cardis ejected) 4.8 (0.177) 2.1 (0.083) 10 (0.394) 78.5 (3.09) 42 (1.653) 35.5 (1,40) 7 No.51 No.2 66.04 (2.6) 41.91 (1.65) No.3 2- Ø 2.8 (0.110) 68- Ø 1 (0.0394) 20
Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141-0022, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com www.fcal.fujitsu.com 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007. 21